The RBC® BEARINGS offers a full line of airframe control ball bearings to the aerospace industry  in both “Standard” and “Precision” series. The prefix “M” in a bearing number indicates that it is of a precision series. Although designed and manufactured under demanding quality control requirements for airborne systems, these bearings have been successfully used in many industrial applications, where oscillatory movement, high loads, or corrosive environments are prevalent.

RBC® BEARINGS airframe control ball bearings conform to SAE-AS7949 (formerly MIL-B-7949) and many major OEM specifications. These bearings are of lightweight design, corrosion-resistant, grease-lubricated, and typically sealed. Airframe control bearing rings and balls are made of hardened bearing alloy, AISI 52100, with all exposed surfaces, except bearing bore, caps and seals, plated for corrosion protection. For improved corrosion protection, RBC® BEARINGS  supplies bearings made of hardened stainless steel alloy, AISI 440C. This alloy may be passivated or plated with cadmium or zinc nickel for enhanced corrosion protection.

The RBC® BEARINGS MKP/MKP-A SAE-AS7949 Precision Series airframe control bearings are single row, heavy duty (MKP) or medium duty (MKP-A) radial ball bearings with PTFE seals and CRES sealcaps. MKP Series bearings conform with MS27640-R specifications while those of MKP-A Series with MS27641-R. External surfaces (except bore, caps, and seals) are cadmium plated. They come prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. For additional information please refer to the supplied documentation.

The RBC® BEARINGS offers a full line of airframe control ball bearings to the aerospace industry  in both “Standard” and “Precision” series. The prefix “M” in a bearing number indicates that it is of a precision series. Although designed and manufactured under demanding quality control requirements for airborne systems, these bearings have been successfully used in many industrial applications, where oscillatory movement, high loads, or corrosive environments are prevalent.

RBC® BEARINGS airframe control ball bearings conform to SAE-AS7949 (formerly MIL-B-7949) and many major OEM specifications. These bearings are of lightweight design, corrosion-resistant, grease-lubricated, and typically sealed. Airframe control bearing rings and balls are made of hardened bearing alloy, AISI 52100, with all exposed surfaces, except bearing bore, caps and seals, plated for corrosion protection. For improved corrosion protection, RBC® BEARINGS  supplies bearings made of hardened stainless steel alloy, AISI 440C. This alloy may be passivated or plated with cadmium or zinc nickel for enhanced corrosion protection.

The RBC® BEARINGS MKSP/MKSP-A SAE-AS7949 Precision Series airframe control self aligning bearings are single row, heavy duty (MKSP) or medium duty (MKSP-A) ball bearings with PTFE seals and CRES sealcaps. These bearings are self aligning for 10 Deg. in either direction  except those with part numbers MKSP4A, MKSP5A and MKSP6A which are self aligning for 8 Deg. in either direction. The RBC® BEARINGS MKSP/MKSP-A bearings conform with MS27645-R specifications. External surfaces (except bore, caps, and seals) are cadmium plated. They come prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. For additional information please refer to the supplied documentation.

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

The HEIM® BEARINGS M M & F M  series are Precision Special Purpose Aircraft rod ends male and female threaded respectively. Their outer members are manufactured from carbon Steel, magnetic particle inspected, with protective coating for corrosion resistance, the balls from 52100 Alloy steel, heat treated, chrome plated and inserts from brass. The letter “L” to prefix indicates Left Hand thread.

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

Series BHM, HFX G and HMX G four piece precision extra capacity rod ends are the high strength series intended for more heavily loaded, static and dynamic industrial applications. These rod ends have 4130 or 4340 alloy steel, heat treated bodies for increased strength and aluminum bronze race inserts for high bearing capacity. The rod end bodies are protective coated for corrosion resistance and the balls are chrome plated for superior wear and corrosion resistance. Series BHM (male) and series HFX G (female) have common thread sizes. Series HMX G (male) have oversized shanks for additional shank strength.

The letter "G" indicates Zerk Lubricator (standard on HFX G/HMX G Series). The letter “L” to prefix indicates Left Hand thread.

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

The HEIM® BEARINGS HME M/HFE M series self lubricating aircraft rod ends, male and female threaded respecively, use HEIM® UNIFLON® PTFE liner and cartridge type construction. The HEIM® UNIFLON® PTFE liner is approved to SAE-AS81820 (formerly MIL-B-18820). Their rod end bodies are made from aircraft quality carbon steel, magnetic particle inspected with protective coating for corrosion resistance. Balls  are made from 52100 alloy steel, heat treated and chrome plated on aluminum race inserts.

Letter “L” in the prefix indicates Left Hand thread

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

RBC Aerospace Bearings offers the industry’s widest selection of rod end type bearings (also known as the Heim rod ends or joints) in inch and metric sizes with a variety of platings, coatings and materials and a range of optional features such as lubrication fittings, left hand threads and keyway slots. RBC product range of Heim rod ends are offered with brass race inserts in standard, precision and high capacity designs, high strength two piece designs, self-lubricating rod ends with engineered thermoplastic races or high performance Teflon® liners, military standard (AS81935) ME/FE rod end series, ball bearing rod ends with extremely low friction and misalignment capability and elastomeric bearing rod ends that reduce vibration and noise in installations. Please refer to the attached documentation for additional information.

M81935/1 ME Series Product Features:

Wide, High Capacity Series

External Threads

Alloy Steel, Self-Lubricated

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

The HEIM® BEARINGS ME/AS81935/1 and FE/AS81935/2 series are military standard, high capacity self lubricating rod ends, male and female threaded respecively, using HEIM® UNIFLON® liner approved to SAE-AS81820 (formerly MIL-B-81820). Their rod end bodies are made from 4340 alloy steel, heat treated, magnetic particle inspected, cadmium plated and chromate treated. Balls  are made from 440C on 17-4PH race inserts and heat treated.

Letters “L” and “K” to prefix indicate Left Hand thread and Keyway respectively.

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

Mil Moscow Helicopter Plant (Russian: Московский вертолётный завод им. М.Л. Миля) is a subsidiary of RUSSIAN HELICOPTERS JSC designing and manufacturing helicopters with particular expertise in heavy-lift helicopters. The company has developed both civil and military versions in a wide range of payload capacities, including the world's largest in serial production, the Mi-26. Mil participates in the Euromil joint venture with Eurocopter.

Components and spare parts are available from our suppliers and offered for Mil helicopters including but not limited to Mil Mi-6 heavy transport helicopter, Mil Mi-8 multi-purpose helicopter mostly used for transport missions, Mil Mi-17  medium twin turbine transport helicopter (also known as Mi-8M) and Mi-171 export version of the Mi-8AMT.

Please also refer to the Product Description section and the supplied documentation for additional information on variants currently in operation and spare parts' availability.

SAFRAN AEROSYSTEMS, part of SAFRAN GROUP, is the world's leading supplier of safety and protection systems with a wide inflatable product and systems' portfolio including aviation life vests, life rafts, escape slides,  helicopter emergency flotation systems for commercial and military aicraft and helicopters. Other company products include crew and passenger oxygen systemsand military aircraft arresting systems.

NEW ZODIAC AIR CRUISERS auto-inflatable emergency life vests / preservers now form part of SAFRAN AEROSYSTEMS product range after ZODIAC AEROSPACE has joined SAFRAN GROUP in 2018  to create the world’s third largest aerospace company (excluding aircraft manufacturers). SAFRAN AEROSYSTEMS aviation life vests are viewed as the lightest on the market, meet TSO and ETSO requirements and are widely used by crew members and passengers worldwide. They are offered in two configurations (one or two inflatable chambers) and are available in all sizes: adult, adult/child, baby/small child or universal.

SAFRAN AEROSYSTEMS aviation life rafts are lightweight and innovatively-designed products. With a capacity of 1 to 56 persons, their product range meets the needs of not only commercial airplanes but also business jets and military aircraft.

As a key player in the evacuation slide market, SAFRAN AEROSYSTEMS equips most commercial aircraft platforms (e.g. Boeing, Airbus, Comac, Irkut, Bombardier, Sukhoi, Illyushin, Tupolev…) and many military aircraft such as the Lockheed C-5 Galaxy or the Boeing KC-135 and KC-46. For additional information please consult the supplied documentation.

The KLIXON® 7277 series circuit breakers are the commercial grade version of the 7274 series circuit breakers  which are small, lightweight, low amperage devices that are specifically designed to protect aircraft/aerospace cable and components in airborne vehicles and equipment. The KLIXON® 7277 series circuit breakers are physically and electrically identical to the 7274-2 military grade circuit breakers, with the exception that the 7277 series has wider calibration limits.  Klixon® 7277 series breakers have been designed for applications that do not require the tighter performance characteristics and approvals of 7277-2 series military circuit breakers. 

Originally developed as an alternative to slow blow fuses, the trip–free 7277 series breakers are used extensively as primary electrical circuit protection on general aviation aircraft. The wider calibration limits of the 7277 has also resulted in applications including protection for data processing and telecommunications equipment, computers, flight simulators, construction, material handling and other industrial,electronic equipment. Suitable for use on trainer / simulator applications where all breakers are operated on low ampere control current, different ampere rating inserts (amp ratings on top of push button) can be ordered.

KLIXON® 7277 series circuit breakers' features include:

• Miniature size

• Light weight

• Trip–free design

• Current rating: 0.5 to 20 amps

• High vibration resistance

• Options include: dust boot (part #14500-1 fits 15/32 bushing, part #14500-5 fits 7/16 bushing), auxiliary switch, terminal hardware, longer push button.

For additional information please consult the supplied documentation.

The KLIXON® 7270/7271 series circuit breakers were designed to utilize less behind panel space while protecting wire and cable in aircraft and ground support equipment on either 120 VAC, 400 Hz or 30 VDC systems.

These circuit breakers are available with neck mounting (7270-1 and 7271-8) or standard cover plate (7270-7 and 7271-3). In each of these KLIXON® circuit breakers, the bi-metallic element assures uniform current distribution throughout its responsive area. This design reduces current density at the critical areas, resulting in an element having a much higher interrupting capability than conventional design. Inherently resistant to shock and vibration, the KLIXON® disc element is capable of precise calibration settings and will retain the initial calibration within close tolerances throughout the service life of the breaker. Both circuit breakers have conventional actuator action; i.e., the toggle actuator on the 7270 moves to the OFF position for trip indication and the button the 7271 pops out. A standard black button with a white collar is used. For additional information please refer to the attached documentation.

The KLIXON® PS series 2 to 35 Amp precision thermal circuit breakers by SENSATA TECHNOLOGIES Inc. (formerly Texas Instruments Sensors & Controls) are designed to interrupt short circuits or overloads and combines trip-free protection with fast response time. They feature a bi-metallic snap-acting disc as the sensing element and they are widely used in production and military aircraft where precise ultimate trip characteristics are required. Models PSM and PSM-N are available in the following ampere ratings 2, 3, 5, 10, 15, 20, 25, 35. When ordering specify if neck-mounting style is wanted by placing “N” after ampere rating. Example: PSM-10N

The KLIXON® PDL series thermal breakers are designed to meet the harshest environmental requirements. They are weatherproof for protection against moisture, dust, grease, fuel vapors, and other harsh environments. For weatherproof circuit breakers in ratings from 50 to 150 amperes, order Model PDLM. 

The Silicon Microstructures SM5882 series of OEM pressure sensorscombines state-of-the-art pressure sensor technology with CMOS mixed signal processing technology to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a small SO16 plastic package. The model SM5882 is designed for operating pressure ranges at 0.6 PSI and 1.5 PSI. Typically used in medical instrumentation, pneumatic control, gas flow and HVAC applications. 

Product Features

CMOS digital signal processor technology

Calibrated pressure available through I²C-Bus-Interface

Analog output signal ratiometric with supply voltage

Differential pressure applications with +/- pressure

EEPROM stored individual correction data

SO-16 package for surface mount

For additional information please refer to the supplied documentation.

The company SPECIALITY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

SPECIALITY TIRES products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case, additional cost may apply.

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

SPECIALTY TIRES products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case, additional cost may apply.

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. They are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed and is available please mention during the order placement. In this case, additional cost may apply.

Inner tubes are also offered for tube type tires which generally share the same designation as the respective tire (e.g. a 5.00-5 inner tube fits a 5.00-5 tire) with exceptions when the inner tube can fit more than one aircraft tyre size (e.g. the 5.00-5 inner tube can be used in both the 5.00-5 as well as the 15×6.00-5 tires). Inner tubes are supplied with valves of different designs (e.g. straight or 90º bend valves) carrying respective designations. Accessories such as French Chalk, Valve Caps, and Cores are also available on request. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

STOMIL-POZNAŃ S.A. is a tire manufacturer producing All-Terrain (AT) tires designed to perform on- and off-road, providing traction and comfort in different surface conditions. STOMIL tires are used in aviation as well other sectors such as the mining industry. STOMIL tires are installed in most Polish gliders and aircraft including; Jantar, Puchaz, PW–5, etc. They are offered in different versions (Wersja) and sizes with  350x135, 200x80 and 255x110 being the most popular ones. Different STOMIL tubes are also offered for use with the company tires.

For additional information please refer to  the supplied documentation.

MAGNUM aircraft rescue ballistic parachute systems (also known as  Vertical Launch Systems, VLS) are manufactured by STRATOS 07 S.R.O with knowledge and long experience in the construction of system components including rocket motors. They include different series produced for many years (like 450, 450 Speed, 501, 601) & newer certificated rescue systems like Magnum 1201 & 1401 for heavier aircraft and higher deployment speeds. They are intended for use in hang-gliding, paragliding, powered hang-gliding, powered paragliding,  unpowered and powered gliders,  gyroplanes as well as a wide range of two- and multi-seat airplanes and helicopters, including Light Sport, Experimental and Ultralights with a maximum 3,960 pounds gross weight, and deployment speeds of up to 199 MPH. Magnum Ballistic Parachutes come in sofpacks or canisters. Rescue systems packed in the softpack are usually installed inside of the aircraft. Rescue systems packed in a duralminium container are installed mostly outside of the aircraft.

Please refer to tables of specifications and notes below for the selection of a right rescue system.

Notes:

The max take-off weight of the aircraft MUST NOT EXCEED the max allowable load of the rescue system.

If the aircraft Vne exceeds the max limiting speed for the rescue system deployment, mounting of the system should be done so that the pilot is informed of this speed.

MAGNUM ballistic parachute systems  are packaged in two parcels (one containing the parachute and the second containing the rocket). Because of the rocket, Haz-Mat shipping is required.

Appearing prices of MAGNUM rescue systems DO NOT INCLUDE cords between parachute and fuselage which are SOLD SEPARATELY. During the order, the length of activating cord from parachute to fuselage must be indicated. Other parts and accessories are also available at additional cost.

The RAY ALLEN Trim Systems are trim servos of flight surfaces offered with different travel options designed specifically for experimental aircraft. RAY ALLEN servos are small enough to fit in individual control surfaces or can be used with lighweight springs acting directly on the control system. They come with RS2 rocker switches,  RP3 LED indicators and a RC8-7 clevis/pushrod kit. All RC ALLEN indicators operate off of feedback sensors located inside the servo. These feedback sensors are purposefully isolated from the power supply to the servo motor to guard against possible electronic failure.  Different servos are available:

T2-7A Trim System with a  .7" (17mm) travel

T2-10A Trim System with a  1.0" (26mm) travel

T3-12A Trim System with a 1.2" (31 mm) travel

T4-5 Trim System with a .5 inch (13mm) travel. This servo does not have a compatible indicator.

Technical Specifications as follows (RAC  Model / Output Shaft Movement / Travel Time):

T2-7A /  0.7 in. / 10 sec.

T2-10A / 1.0 in.  / 16 sec.

T3-12A /  1.2 in.  / 19 sec.

T4-5 / 0.5 in. / 15 sec.

The G3 Series Stick Grips by RAY ALLEN COMPANY (RAC) includes four different models: G301, G303, G305 and G307. All feature four individual SPDT momentary contact switches to control one or two axis electric trim. The switches are triggered via a traditonal 4-way "hat" type activator. These switches are high quality with 15 amp Honeywell microswitches for their superior tactile characteristics. The slotted one or two axis faceplates also adds to the very positive switching action. The four trim switches can be wired directly to Ray Allen servos, eliminating the need to wire relays in the trim system when one grip is used. However, if two grips are used, either relays or a switch to transfer the control of trims from one grip to the other will be needed. The hand grip itself is made out of a very strong BASF composite that has excellent UV resistance. The entire grip has a textured finish. The G3 grips are 6.5” (165 mm) tall. All G3 grips feature a momentary contact, SPDT Push-To-Talk (PTT) switch located on the front side of the grip. A black faceplate is included with each grip. Gray and tan faceplates are also available. All Ray Allen  Stick Grips are designed to fit any stick size up to 1 1/8” in diameter with the use of spacers. Three spacers will be included with each grip enabling easy installation on 3/4”, 7/8” and 1” sticks. The stick grips include pre-cut and stripped 26 gage teflon insulated 19 strand wire. A die-cut label sheet with 50 different labels is supplied with all G3 grips. The labels are lexan coated for long service life and fit in their own recesses for a professional appearance.

All G3 Series Stick Grips feature:

- four individual SPDT momentary contact switches to control one or two axis electric trim. The switches are triggered via a traditonal 4-way "hat" type activator. The four trim switches can be wired directly to Ray Allen servos.

- high quality switches with 15 amp Honeywell microswitches for superior tactile characteristics. 

- slotted one or two axis faceplates. A black faceplate is included. Gray and tan faceplates are also available. 

- the G301 comes with a PTT switch and blank faceplates

- the G303 has two trim switches, a faceplate slotted vertically for one-axis trim and a PTT switch

- the G305 stick grip has four trim switches, a faceplate slotted vertically and horizontally for two-axis trim and a PTT

 -the G307 stick grip has four trim switches, a faceplate slotted vertically and horizontally for two-axis trim, a PTT switch and two additional SPDT momentary contact pushbutton switches. The pushbutton switches can be replaced with four different style toggle switches.

TEKNOFIBRA® is a leading manufacturer of aircraft firewall, exhaust, electrical, fuel system heat and sound absorbing materials. TEKNOFIBRA® product range includes Heat Reflecting Panels, Sleeves, Contacts and Aluminum Adhesive Tapes. The impressive heat-reflecting and insulating characteristics of Teknofibra® products ensure resistance and protection, even at extreme temperatures. Their lightness (lighter in weight than competition) makes them the perfect insulation for aeronautical uses. The organic composition of Teknofibra® non-woven fabric guarantees maximum safety and non-toxicity in every situation. In the event of a fire, no harmful emissions are produced, preserving total safety. Sound absorbing Teknofibra® panels dramatically reduce excessive noise that can distract and compromise results. TEKNOFIBRA® products are widely used in the Aviation, Car Racing and Motorcycling fields.

High Pressure Strut Valve with Small Diameter Thread Adapter. Fits in nose gear of certain Cessna models.

Different screws used on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

Brakes and related parts for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

Fuel and oil drain valves for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

Different bolts used on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

Versatile split red master switch used in virtually all single engine Cessna models since 1970. It can be used in most light aircraft with single alternator systems. Left rocker normally is used for alternator and right half for battery. Amp Rating: 20. The swich housing mount (P/N: S1843-1) is sold separately and can only be ordered together with the switch.

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicropress hand squeezers. Provides a bond that is even stronger than a standard splice. They are offered in pure copper or zinc/tin coated for different cable sizes in inches. Plain copper ("18" series) and zinc coated sleeves ("28" series) are used with galvanized cable, and tin coated sleeves are to be used with stainless steel cable. 

TIMKEN® lock nuts and respective lock washers are used in the mounting of straight bore bearings on shafts. They are available for bearings in the various series. Their dimensions relate to the bearing bore sizes.

TIMKEN® tapered roller bearings are characterized by reliability, versatility and choice. They stand up to extreme situations, including high-corrosive, high-temperature, vacuum or low-lubrication environments. Uniquely designed to manage both types of loads on rotating shafts and in housings and offer a choice of nearly 26,000 product combinations, from single, double to four-row configurations and thrust bearings. Each bearing contains four interdependent components: the cone (inner ring), the cup (outer ring), the tapered rollers (rolling elements) and the cage (roller retainer). Tapered angles allow bearings to efficiently control a combination of radial and thrust loads. The steeper the outer ring angle, the greater ability the bearing has to handle thrust loads. To provide a true rolling motion of the rollers on the raceways, the extensions of the raceways and the tapered surfaces of the rollers come together at a common point, the apex, on the axis of rotation.

TIMKEN® Single Row (TS) bearings are basic and most widely used. Usually fitted as one of an opposing pair. They can be “set” to the required clearance (endplay) or preload condition to optimize performance. TSF type bearings, a TS variation, have a flanged outer ring to facilitate axial location and accurately aligned seats in a through-bored housing.

TIMKEN® Double Row Outer Ring bearings (TDO)  have a one-piece (double) outer ring and two single inner rings. Usually supplied complete with an inner-ring spacer as a pre-set assembly. They offer a wide effective bearing spread and frequently chosen for applications where overturning moments are a significant load component. Other bearing types include TDI (double-row double inner race) and TDIT (same as TDI with tapered bore). Both comprise a double inner ring and two single outer rings. Usually supplied complete with an outerring spacer as a pre-set assembly. TDI and TDIT bearings can be used at fixed (locating) positions on rotating shaft applications. Offered types include: TNA (double-row non-adjustable), TNASW (same as TNA with lubricant slots) or TNASWE  (same as TNSW with extended back face rib). They are similar to the TDO with a one-piece (double) outer ring and two single inner rings.  Supplied with a built-in clearance to give a standard setting range, these bearings provide a solution for many fixed or floating bearing applications where optimum simplicity of assembly is required.

For aerospace applications, different FAA PMA approved tapered single roller bearings are offered including TIMKEN® 13600, 13800 and LM813000 Series with a cone assembly and a cup. Offered in "inch" and "metric" versions LM813000 Series feature  minimization of friction between the rotating parts, handling of thrust loads, even load distibution across the roller, heavy load carrying capacity & stamped steel cage.

For additional information please refer to the supplied documentation.

TIMKEN® lock nuts and respective lock washers are used in the mounting of straight bore bearings on shafts. They are available for bearings in the various series. Their dimensions relate to the bearing bore sizes.

UNIFRAX® is the largest ceramic fiber producer worldwide with in-house paper-making capabilities. UNIFRAX® products include FIBERFRAX®Ceramic Fiber Insulation Blankets (S Durablanket 2300F and 2600F, Fibermax Blanket 3000F), FIBERFRAX® Ceramic Fiber Insulation Papers in different grades, FIBERFRAX® Ceramic Fiber Insulation Boards (Duraboard LD and HD 2300F, Duraboard 2600F and 3000F), FyreWrap Insulation Ducts (Elite Grease, Elite Air Distribution System (ADS), Dryer Protection System (DPS), Plenum and Cable) and High Temperature Textiles (Ceramic Cloths 2300F, Ceramic Tapes 2300F, Ceramic Square and Round Braids 2300F, Ceramic Twisted Ropes 2300F, Silica Textiles 2000F and Fiberglass Textiles 1000F. UNIFRAX® products are distributed by Thermal Products Company, Inc.

For FIBERFRAX® Ceramic Fiber Insulation Papers please consult the Product Description section and supplied documentation. Other products can also be supplied on demand. Please contact us.

TOST Flugzeuggerätebau designs and manufactures top quality products including aircraft wheels, brakes, tires, tubes, glider towing and launching equipment and tow releases serving the needs of aviation sports and industry. TOST and TOST AERO brands for tires are synonyms for safety in aviation.. TOST wheels are used worldwide in gliders, motor gliders, aircraft, ultralight, amphibium aircraft, helicopters and gyrocopters but also in heavy-duty applications.

TOST Landing Wheels (LR) are designed for use in aircraft as nose wheel, tail wheel, support wheel or as unbraked main wheel and they are offered in different series and various dimensions and constructions. TOST Disk Brake Wheels (SB) are presented separately.

Mini 150 & 180 Series, fitting tire diameters 150 mm and 180 mm respectively, are the smallest available wheels with pneumatic or foam-filled tires providing good suspension and absorption properties. 

Moritz Series 3″ Tail Wheels are available in two versions: Moritz, a sturdy aluminium die-cast wheel hub with fins sector and Moritz II, a two-part wheel hub CNC milled from aluminium. 

Max Series 3.5″ Tail Wheels fit tire size 200 x 50, widely used for tail wheels of gliders and motor gliders.

Classic Series 4″ Landing Wheels can be used as sturdy nose wheels and main wheels or for special purposes.

Tria 4″ Landing Wheels are convenient for applications, in which a low weight combined with a high strength are required.

Classic Series 5″ Landing Wheels are used as aircraft nose wheels and other heavy duty applications. 

Penta 5″ Landing Wheels can be used to save weight as well as a possible replacement for landing wheels equipped with inch bearings. 

The 5″ Tubeless Landing Wheels can be used  to realisze a further weight reduction.  The weight decrease is about 15% in total weight compared to a wheel hub with tire and tube (tubetype TT).

Mike Series 6″ Landing Wheels from aluminium diecast with deformable fins sector are particularly suitable for high loads.

Penta Series 6″ Landing Wheels can save weight compared to the Landing wheel (LR) of the 6″ Classic series.

Classic Series 10″ Landing Wheels can be used in the range of high-tensile special applications.

Matching TOST AERO tires and tubes are offered for all TOST Landing Wheels. Please consult the tables with information on available tires and tubes for the different series.

For additional information please refer to the Product Description section and the supplied documentation.

TOST Flugzeuggerätebau designs and manufactures top quality products including aircraft wheels, brakes, tires, tubes, glider towing and launching equipment and tow releases serving the needs of aviation sports and industry. TOST and TOST AERO brands for tires are synonyms for safety in aviation. 

For more than 30 years TOST has manufactured aircraft tires from 3" to 10" exclusively under the TOST AERO brand with a long lifetime, robustness and capability for high loads and speeds. TOST AERO tires and tires from other brands can be used with TOST wheels designed to cover a wide range of applications in gliders, motor gliders, aircraft, ultralight, amphibium aircraft, helicopters and gyrocopters but also in heavy-duty applications. Matching tire tubes with different valves and valve extensions are also offered by TOST to cover application requirements.

For additional information please refer to the supplied documentation.

TYCO ELECTRONICS TE CONNECTIVITY™ SOLISTRAND Series Terminals & Splices are specially designed to terminate solid and stranded wire, irregular-shaped conductors, and wire-conductor combinations while still retaining the superior performance characteristics of single-purpose terminals and splices. The series resists corrosion and vibration, and the tensile strength is well within the limits of commercial and military specifications. TE Connectivity offers SOLISTRAND crimping tools to ensure terminations are consistent and uniform for easier quality control and reliable performance. The TE SOLISTRAND line includes terminals, parallel and butt splices, flat rings, spades, hooks, and flanged tongue terminals in sizes from 26AWG (0.1mm2) through 600 MCM (304mm2).

Features & Benefits

SOLISTRAND terminals and splices are constructed of fine grade high conductivity copper for optimal electrical performance

The brazed seam increases metal strength around the entire barrel area assuring withstanding harsh industrial environments. It also prevents pinched and stubbed wires

The “W” crimp – two longitudinal crimps – and the dimples or serrations inside the wire barrel  offer maximum electrical contact area after crimping and higher tensile strength. This permits the use of a shorter barrel, which end up in a smaller form factor and makes it more cost effective

Bell mouth on barrel entrance makes insertion of wires easier and reduces installation time and increasing production yield

Most SOLISTRAND terminals and splices meet or exceed the requirements of SAE AS7928, Type I, Class 1 and 2. Aircraft-, defense- and marine (related) equipment base their performance requirements on AS7928

Rated for up to 170°C maximum and therefore suitable in all standard applications.

Applications

Pad- and pole-mount transformers

Power supplies

Motors

Switchgear

Telecommunications

Appliances

Panel boxes

Heavy equipment

Instruments/control

Transportation

For additional information please refer to the supplied documentation.

Bi-metallic push to reset only thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 30 amp ratings. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Push To Reset Only

0.5 amp to 30 amp ratings.

Cannot be manually tripped.

Button extends for visual trip indication.

Push button to reset breaker.

90 Degree Screw-On Terminals

These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz). 

Product Features:

Lightweight, less than 2 oz.

Push/Pull Actuator Thermal Circuit Breaker

0.5 amp to 50 amp ratings may be used as on/off switch

Cannot be reset against overload

W23 has visible trip indicator

Screw termination

Trip-free operation

Bi-metallic single toggle thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 50 amp ratings may be used as on/off switch. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Lightweight, less than 2 oz.

0.5 amp to 50 amp ratings may be used as on/off switch.

Cannot be reset against overload.

Screw termination.

Trip-free operation.

TYCO ELECTRONICS TE CONNECTIVITY™ PIDG ring tongue terminals  are available in different colors, wire sizes (AWG) and stud sizes. Appearing sizes are in inches. Each TE CONNECTIVITY™ insulated terminal consists of a tin plated copper body, a tin plated copper wire support sleeve and a color-coded insulation sleeve. They meet respective MIL specification.

TYCO ELECTRONICS TE CONNECTIVITY™ STRATO-THERM Terminals and Splices are specially designed for High Temperature applications up to 1200°F [649°C]. If heat is an unavoidable dimension in the circuit design and production STRATO-THERM terminals and splices consist the right choice also addressing other more familiar circuit problems such as vibration, corrosion and flash-over, when they occur at high temperatures.

Different types of high temperature terminals and splices in  STRATO-THERM series include:

PIDG Terminals and Splices, and Pre-Insulated Spare Wire Caps — 550°F [288°C] range

PIDG Insulation Restriction Terminals — 550°F [288°C] range

Post-Insulated Terminals and Splices — 550°F [288°C] range

Uninsulated Terminals and Splices — 650°F [343°C] range

Uninsulated Terminals and Splices — 1200°F [649°C] range

All five types of STRATO-THERM terminals and splices provide optimum corrosion and vibration resistance plus outstanding tensile characteristics.

All types, except the STRATO-THERM PIDG terminals, splices and preinsulated spare wire caps, employ the famous “W” crimp which creates the precise electromechanical properties necessary for solid and/or stranded conductor combinations.

Main features and benefits include:

- Available in temperature ranges of 500°F [260°C], 550°F [288°C], 650°F [343°C] and 1200°F [649°C]

- Employ the “W” and “C” crimp

- Wide range of wire sizes

- Complete line of related application tooling

- Accommodate solid and/or stranded conductors

For additional information please refer to the supplied documentation.

TYCO ELECTRONICS TE CONNECTIVITY™ ARINC 600 Connectors feature a stamped and formed contact system versus the traditional, screw machined contact system. Available in either Solder Tail or Press-fit (eye of the needle) designs.

Being the first to offer size 22 contacts in a press-fit PCB attachment style, their ARINC 600 product portfolio now includes press-fit size 20, 16 and 12 power contacts, as well as press-fit Quadrax contacts providing a total press-fit PCB-attach connector solution.

TE CONNECTIVITY™ ARINC 600 Connectors feature a lighter design for considerable cost savings. The stamped system allows for selective gold plating to only critical socket contact tines instead of the whole contact, decreasing gold plating costs. By changing to hollow contacts instead of the solid contacts in the legacy design, this product design reduces weight by up to 10% (depending on insert arrangement) and includes backward compatibility. All these with the same high levels of performance and reliability.

Features & Benefits

Completely inter-mateable with existing ARINC 600 plug connectors

"Monoblock" single-piece inserts that simplify the manufacturing process, cut costs

Stamped and formed, selectively plated size 22 contacts provide substantial cost savings while delivering excellent performance and reliability

Equivalent electrical performance vs. current design

Available in either Solder Tail or Press-fit (eye of the needle) designs

Up to 10% weight savings per connector (depending on insert arrangement)

Applications

• In-Flight Entertainment

• In-Flight Networks

• Flight Controls and Communication

• Military Ground Vehicles

For additional information please refer to the supplied documentation.

Note: TYCO ELECTRONICS TE CONNECTIVITY™ ARINC 600 Connectors are Special Order items and therefore Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Please contact us. 

Prevents return fuel flow during normal operation but provides by-pass fuel feed in an emergency if the fuel pump fails. Wt. 1 oz., 2-7/8" long. Use with tube fittings for 3/8" dia. fuel line. Anodized for corrosion resistance. Made in USA