Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.

Bi-metallic single toggle thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 50 amp ratings may be used as on/off switch. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Lightweight, less than 2 oz.

0.5 amp to 50 amp ratings may be used as on/off switch.

Cannot be reset against overload.

Screw termination.

Trip-free operation.

YAESU rechargable batteries are intended for use with YAESU handheld transceivers.

Military Specification MS35059 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).

ZEFTRONICS Voltage Regulator with ground fault protection, trouble shooting light, black plastic connector & 16V over voltage protection built in.

Bi-metallic push to reset only thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 30 amp ratings. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Push To Reset Only

0.5 amp to 30 amp ratings.

Cannot be manually tripped.

Button extends for visual trip indication.

Push button to reset breaker.

90 Degree Screw-On Terminals

The KLIXON® 7277 series circuit breakers are the commercial grade version of the 7274 series circuit breakers  which are small, lightweight, low amperage devices that are specifically designed to protect aircraft/aerospace cable and components in airborne vehicles and equipment. The KLIXON® 7277 series circuit breakers are physically and electrically identical to the 7274-2 military grade circuit breakers, with the exception that the 7277 series has wider calibration limits.  Klixon® 7277 series breakers have been designed for applications that do not require the tighter performance characteristics and approvals of 7277-2 series military circuit breakers. 

Originally developed as an alternative to slow blow fuses, the trip–free 7277 series breakers are used extensively as primary electrical circuit protection on general aviation aircraft. The wider calibration limits of the 7277 has also resulted in applications including protection for data processing and telecommunications equipment, computers, flight simulators, construction, material handling and other industrial,electronic equipment. Suitable for use on trainer / simulator applications where all breakers are operated on low ampere control current, different ampere rating inserts (amp ratings on top of push button) can be ordered.

KLIXON® 7277 series circuit breakers' features include:

• Miniature size

• Light weight

• Trip–free design

• Current rating: 0.5 to 20 amps

• High vibration resistance

• Options include: dust boot (part #14500-1 fits 15/32 bushing, part #14500-5 fits 7/16 bushing), auxiliary switch, terminal hardware, longer push button.

For additional information please consult the supplied documentation.

Military Specification MS35058 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).

The KLIXON® 7270/7271 series circuit breakers were designed to utilize less behind panel space while protecting wire and cable in aircraft and ground support equipment on either 120 VAC, 400 Hz or 30 VDC systems.

These circuit breakers are available with neck mounting (7270-1 and 7271-8) or standard cover plate (7270-7 and 7271-3). In each of these KLIXON® circuit breakers, the bi-metallic element assures uniform current distribution throughout its responsive area. This design reduces current density at the critical areas, resulting in an element having a much higher interrupting capability than conventional design. Inherently resistant to shock and vibration, the KLIXON® disc element is capable of precise calibration settings and will retain the initial calibration within close tolerances throughout the service life of the breaker. Both circuit breakers have conventional actuator action; i.e., the toggle actuator on the 7270 moves to the OFF position for trip indication and the button the 7271 pops out. A standard black button with a white collar is used. For additional information please refer to the attached documentation.

START PAC® manufactures an extensive range of portable & mobile aircraft Ground Power Units (aka GPU) & starting battery packs used in different applications and operational scenarios, from supply of reliable mobile ground power for remote airstrips through to powerful hybrid solutions for fully high throughput Aircraft Maintenance, Repair & Overhaul operations. START PAC®’s product range includes GPU providing clean power for both maintenance and engine starting aircraft on the ground, a range of  of starting units with high power batteries and over voltage protection relays capable of starting any type of electrically started engine, power supply units to power up your aircraft’s cockpit whenever there is a need to operate any onboard device on the ground and check avionics as well as related accessories. Power supply units plug to the wall AC socket and provide continuous, clean, no duty cycle DC power.

High quality vinyl toggle switch covers that do not have a nipple at the end of the cover. Suitable for MS35058 series switches. Available in different colors.

Versatile split red master switch used in virtually all single engine Cessna models since 1970. It can be used in most light aircraft with single alternator systems. Left rocker normally is used for alternator and right half for battery. Amp Rating: 20. The swich housing mount (P/N: S1843-1) is sold separately and can only be ordered together with the switch.

Gill has become the OEM "original equipment battery" for Raytheon, Cessna, LearJet, Mooney, Piper, Ayres, Airtractor, Maule, Scheizer and other commercial, private and military aircraft  in the aviation industry and continues to be the industry's choice for quality battery products. In addition to the traditional Dry Battery line, Gill offers the LT Battery Sealed products featuring improved shelf life, lower weight, dependability, durability, high reliability, improved energy density, robust construction, testing and approval to DO-160E as well as FAA/PMA approval.

Gill  Dry Batteries, like other dry batteries, are considered as Non Dangerous Goods  and only need to be packaged to avoid short circuits during transportation. They can be shipped as ordinary goods during sea and air transportation.

KNITTER-SWITCH & CO.KG (KNITTER-SWITCH) manufactures  a wide range of professional switches including toggle,  pushbutton, tact, slide, dual-in-line, rotary coded, rotary, encoders and snap action switches.

KNITTER switches are available in different versions (configurations), Standard with silver or silver-plated contacts and terminals, Configuration B with gold-plated (over Nickel) contacts and terminals and Configuration G with gold-plated (over silver) contacts and terminals. All switches are sealed on the terminal side and meet CE regulations. Switches for SMT as well as most series for PCB mounting are generally fully washable.

Some KNITTER switches are ESD-resistant and have an approved IP 67 waterproof rating.

KNITTER range of toggle switches includes miniature, subminiature and microminiature toggle switches offered in different series and types. Depending on the selected series and type there are offered in one or multiple poles and switching functions.

 For additional information please consult the supplied documentation.

SKY-TEC, a HARTZELL ENGINE TECHNOLOGIES brand, includes starters and support for Prestolite, Electrosystems, Lamar and Kelly designs. SKY-TEC OEM contactors are today installed in many general aviation aircraft while SKY-TEC FAA-PMA contractors can be used for starter, battery master/auxiliary or auxiliary power applications in replacement of OEM parts.

SKY-TEC STS-S Series FAA-PMA certified aircraft starter solenoids (aka relays) are intermittent duty suitable for starter applications. They are available in 12V (STS-S12) or 24V (STS-S24) versions. Activation: +V to S-Terminal (Frame is grounded by mounting).

SKY-TEC STS-M Series FAA-PMA approved Battery/Master solenoids are continuous duty solenoids intended for use in battery master/auxiliary applications in certified aircraft. They are available in 12V (STS-M12) or 24V (STS-M24) versions. Activation: -(Ground) to S-Terminal. (Floating ground frame).

SKY-TEC STS-A Series FAA-PMA approved solenoids are continuous duty and typically used for connecting auxiliary (ground) power. They are available in 12V (STS-A12) or 24V (STS-A24) versions. Activation: varies.

Product Features:

FAA-PMA Certified

All-metal case construction

Silver contacts (vs. copper) for high-current capability and long-life. They provide 300A in-rush capability. Much higher than the original units.

Strong spring and high-current coil for quick contact opening - minimizing arcing

Single coil terminal (other end connected to case)

High quality manufacturing 

Upgraded to perform best with today's lightweight, high torque starters

Same OE terminal layout simple to install

For additional information on different SKY-TEC series of slenoids and their applications in different aircraft please refer to the respective product presentations.

FINDER 66 Series 30 A Power relays are electromagnetic devices available in DPDT (66.22/66.82) and DPST-NO versions (66.22-x300/66.82-x300) & different variants.

Product Features:

• Reinforced insulation between coil and contacts according to EN 60335-1

• 8 mm creepage and clearance distances

• AC coils & DC coils

• Cadmium Free option available

• ATEX compliant (EX nC) options available

Double Pole Double Throw (DPDT) Changeover (66.22 and 66.82). Commonly used to separate two circuits electrically and connect them magnetically. They are often used to interface an electronic circuit, which works at a low voltage to an electrical circuit which works at a high voltage. 

66.22 type with 30 A rated contacts, PCB mount and bifurcated terminals

66.82 type with 30 A rated contacts, Flange mount and Faston 250 connections 

Double Pole Single Throw Normally Open (DPST-NO) (66.22-x300 and 66.82-x300). Equivalent of 2 SPST switches (NO Normally Open and NC Normaly Closed) and can be used to switch 2 different loads.

66.22-x300 type with 30 A rated contacts, PCB mount and bifurcated terminals

66.82-x300  type with 30 A rated contacts, Flange mount and Faston 250 connections 

Aviation grade ELECTRODELTA X61 series solenoids by LAMAR TECHNOLOGIES LLC are offered in continuous  or intermitant duty in 12 or 24 Volt. They fit current GA production aircraft as well as legacy aircraft and replace both single terminal switched units, as well as the current double terminal switched units in production today. All units have multiple quality and functional tests prior to certification and delivery. Non FAA-PMA Approved.

Product Features:

Replace most contactors in general aviation

Available in 12 or 24 Volt

Available for Continuous or Intermittent duty

All units inspected and tested to performance standards

Warranty 24 months

RAY ALLEN (RAC) R2S Rocker Switch provides a very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting and allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75" (44mm) x 1.0" (25mm) x 1.47" (37mm) deep. Self adhesive labels are not included. Sold separately.