The ORION 600 series is a FAA/TSO approved all LED self-contained wingtip mounted position (aviation red/green) / anti-collision (aviation white) lighting system manufactured by WHELEN AEROSPACE TECHNOLOGIES (WAT). Incorporating the latest state of the art LED technology available in an all-inclusive package, the ORION 600 series system eliminates the need for external flasher boxes, external power supplies and reduces current draw providing thousands of hours of operation. Flush mountable for a wide variety of applications with minimal integration and easily retrofitable to the Whelen legacy strobe products. The ORION 600 series is quite simply the brightest form of LED Anti-collision and Position lighting available. Offered in 12 VDC and 28 VDC versions.

Product Features:

Fully FAA/TSO-C96a & TSO-C30c approved

FAR SPEC Certified

Replaceable hard coated polycarbonate lens to maintain maximum light output

No RF emissions

Aerodynamic design without sacrificing light output

Exceeds FAA minimum intensity requirements for maximum visibility and increased safety of flight

Environmentally tested and certified to RTCA/DO-160G standards

Product Specifications:

Weight 0.4 lbs.(181gm)

Dimensions H x W x L 2.04” (52mm) x 1.78” (45mm) x 5.65” (144mm)

Volts 12 VDC 28 VDC

Position LED colors Aviation Red Aviation Green

Anti-Collision LED color Aviation White

Lenses Clear Polycarbonate Hardcoat, Field Replaceable

Versatile split red master switch used in virtually all single engine Cessna models since 1970. It can be used in most light aircraft with single alternator systems. Left rocker normally is used for alternator and right half for battery. Amp Rating: 20. The swich housing mount (P/N: S1843-1) is sold separately and can only be ordered together with the switch.

Military Specification MS35058 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).

START PAC® manufactures an extensive range of portable & mobile aircraft Ground Power Units (aka GPU) & starting battery packs used in different applications and operational scenarios, from supply of reliable mobile ground power for remote airstrips through to powerful hybrid solutions for fully high throughput Aircraft Maintenance, Repair & Overhaul operations. START PAC®’s product range includes GPU providing clean power for both maintenance and engine starting aircraft on the ground, a range of  of starting units with high power batteries and over voltage protection relays capable of starting any type of electrically started engine, power supply units to power up your aircraft’s cockpit whenever there is a need to operate any onboard device on the ground and check avionics as well as related accessories. Power supply units plug to the wall AC socket and provide continuous, clean, no duty cycle DC power.

Bi-metallic single toggle thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 50 amp ratings may be used as on/off switch. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Lightweight, less than 2 oz.

0.5 amp to 50 amp ratings may be used as on/off switch.

Cannot be reset against overload.

Screw termination.

Trip-free operation.

At only 26 millimeters in height (1.024 inch) the new PowerBurst NG™ DayLite by AVEO ENGINEERING is a Nav/Position/Strobe light that does not sacrifice anything in performance or standards as other economy-priced lights offered by the competition.The exclusive and highly advanced optics and chrome reflector system, unmatched power and LED management circuitry, and AVEO 's famous lowest-drag profile in the industry are all combined into a product that gives you unmatched power and features. Lower, narrower and shorter PLUS much lighter than industry lights in this category. This is not a TSO certified light. Intended for experimental aircraft.

Product Features:

3-in-1 Nav/Position/Strobe

Extremely lightweight

Unmatched circuit technology

Waterproof

Vibration-proof

Shock-proof

Dust-proof

Limited 3yr Warranty - Product must be registered within 30 days of purchase Here

Product Specifications:

Dimensions (mm): 115 mm x 33 mm x 26 mm

Dimensions (inches): 4.547” x 1.302” x 1.024”

Weight: 70 g / 2.47 oz

Operating Voltage Range: 9 – 18 V DC

Input Current – Position / Nav - green (@14V): 0.28 A

Input Current – Position / Nav - red (@14V): 0.23 A

Input Current – Strobe (@14V): 2 A peak

Output Power - Position / Nav - green: 3.3 W

Output Power - Position / Nav - red: 2.5 W

Output Power - Strobe: 24 W peak

Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.

Military Specification MS35059 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).

KNITTER-SWITCH & CO.KG (KNITTER-SWITCH) manufactures  a wide range of professional switches including toggle,  pushbutton, tact, slide, dual-in-line, rotary coded, rotary, encoders and snap action switches.

KNITTER switches are available in different versions (configurations), Standard with silver or silver-plated contacts and terminals, Configuration B with gold-plated (over Nickel) contacts and terminals and Configuration G with gold-plated (over silver) contacts and terminals. All switches are sealed on the terminal side and meet CE regulations. Switches for SMT as well as most series for PCB mounting are generally fully washable.

Some KNITTER switches are ESD-resistant and have an approved IP 67 waterproof rating.

KNITTER range of toggle switches includes miniature, subminiature and microminiature toggle switches offered in different series and types. Depending on the selected series and type there are offered in one or multiple poles and switching functions.

 For additional information please consult the supplied documentation.

TE CONNECTIVITY (AMP) solderless electrical terminals and splices meet and exceed today's requirements for reliable terminals in applications ranging from control circuits to heavy duty power wiring. The butt type splices are available in different colors and wire sizes (AWG). Appearing sizes are in inches. 

AMP Flexi Block Modular Terminal is used for assembles of terminal blocks to custom requirements and it is avalable in Users and Professional complete kits. 

Users Kit consists of 25 pieces Flexi-BLock terminal block, 12 end stops and two 12 in pieces of track,

Professional Kit - No. 6 kit consists of 100 ea. P/N 604101-1 block assemblies, 25 ea. of P/N 604111-1 end stops and 2 ea. track 3 ft. long.

Sourced from quality producers, the MIL-DTL-27500 shielded electical cables are offered as part of our own label (AVIATIONEU NEW ERA) product lines consisting cost-effective alternatives to the respective OEM products. Depending on the producer and specification, MS27500 cables come with stranded copper single or mltiple conductors (cores), nickel, silver or tin-plated and individually insulated, different number of strands, different chemically inert fluoropolymer insulation materials with good ozone and oxidation resistance as well as single or double shields. Their jackets are made of fluoropolymer, PTFE, glass, or polyamide tape.

The MIL-DTL-27500 shielded cables are used in a range of applications including avionics, military and civilian aerospace and airframe applications and ground support equipment and they are rated to a maximum voltage of 600 volts and maximum usable temperatures from 150 °C to 260 °C. 

The AVIATIONEU NEW ERA MIL-DTL-27500 cables are offered in different configurations with single or multiple individually insulated conductors (cores) in various AWG sizes, insulation materials and shields to meet application requirements. Those commonly used include components listed below but other configurations can be available. For additional information on M27500 cables, please see our brief presenation in the Product Description section.

- Stranded tin-plated cooper single or multiple-conductor(s) (aka cores) comforming with MIL-W-22759/18 specification,

- Tefzel™(**) ETFE (ethylene-tetrafluoroethylene resin) insulation on each conductor

- tin- plated copper braided shield

- Tefzel™(**) ETFE jacket

The AVIATIONEU NEW ERA MIL-DTL-27500 cables are available in cut-to-order or pre-determined lengths in feet indicated in the product reference number (SKU) and packaged in rolls or spools. They are accompanied by our Certificate of Conformance (CoC). Due to their large variety of these cables, listed products shall continuously increase. If wanted cables cannot by found, please contact us.

(*) American Wire Gauge (AWG): Wire gauge is a measurement of wire diameter. This determines the amount of electric current a wire can safely carry, as well as its electrical resistance and weight.

(**) Tefzel™ and Teflon™ are registered trademarks of the DuPont Corporation.

LONE STAR AVIATION manufactures multiple fans and blowers for OEM applications.

The CYCLONE 100 FAA-PMA approved 1 port blower is the smallest (1 x 2 x2 ), most efficient (brushless dc motor), and the most versatile cooling fan for avionics and or other electronics needing thermal cooling. Its universal mounting bracket makes it easy to set-up and install on on many make and model aircraft and or rotor-craft.  Also installed in Land-Mobile, Marine and Military Vehicles for many PED, radio, GPS applications. Offered in Input 12VDC/24VDC versions.

Lone Star Aviation's new FAA-PMA approved Cyclone 1 port blower is the smallest (1 x 2 x2 ), most efficient (brushless dc motor), and the most versatile cooling fan for avionics and or other electronics needing thermal cooling. Its universal mounting bracket makes it easy to set-up and install on on many make and model aircraft and or rotor-craft.  Also installed in Land-Mobile, Marine and Military Vehicles for many PED, radio, GPS applications. 

The CYCLONE 21 FAA-PMA approved 3 port blower is a compact (3 x 3 x 1") aircraft electronics cooling fan that delivers 21 cubic feet per minute of forced air cooling to a variety of avionics equipment. It is the top FAA approved avionics blower for 14/28 volt aircraft with the smallest footprint and the highest output but also the number one choice for OEM and aftermarket sales world-wide for many make and model aircraft and rotor-craft.

For more information on the above products please consult the Product Description section and the supplied documentation.

RIPLEY® UTILITY TOOL® INFINITY Adjustable Cable Stripper is the industry’s most versatile, reliable and accurate adjustable heavy-duty tool for mid-span and end stripping on primary and secondary utility cables. It eliminates the need for traditional stripping knives, reducing the risk of cuts or lacerations. Its patent-pending, self-aligning design maintains optimum blade position to produce precise cuts for reliable splices & unions. Easily adjusts for 0.5″ to 2.5″ (12.7 mm to 63.5 mm) cable diameters with Standard & EPR optimised blades easily accommodating various jacket & insulation materials. Additionally it features recessed blade increasing safety & is easy replacement, adjustable blade depth & angle for greatest range of applications, detachable, ergonomic handles for use in tight spaces and optional blade depth gauge providing positive depth control while making blind cuts during mid-span applications.

The Silicon Microstructures SM5882 series of OEM pressure sensorscombines state-of-the-art pressure sensor technology with CMOS mixed signal processing technology to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a small SO16 plastic package. The model SM5882 is designed for operating pressure ranges at 0.6 PSI and 1.5 PSI. Typically used in medical instrumentation, pneumatic control, gas flow and HVAC applications. 

Product Features

CMOS digital signal processor technology

Calibrated pressure available through I²C-Bus-Interface

Analog output signal ratiometric with supply voltage

Differential pressure applications with +/- pressure

EEPROM stored individual correction data

SO-16 package for surface mount

For additional information please refer to the supplied documentation.

Master Relay (Battery Solenoid) for all homebuilts (not suitable for certified aircraft). Continuous duty. Offered for 12V and 24V systems.

When battery terminals with heavy current capacity and high conductivity are required AVIATIONEU NEW ERA SC HEAVY DUTY lug type battery terminals are recommended. Similar to the AVIATIONEU NEW ERA SC brass battery terminals except that they are are produced from pure copper  and tin plated, they are available in three versions: SC(JGA), SC(JGY) and SC(JGB). Please refer to the specifications table. They can be used with wire sizes 1.5-1000mm2 (16AWG - 777MCM). Sold in packs of 20 pieces each with Minimum Order Quantity (MOQ) 5 packs. The appearing price is for reference only. Please contact us for quotation.

These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz). 

Product Features:

Lightweight, less than 2 oz.

Push/Pull Actuator Thermal Circuit Breaker

0.5 amp to 50 amp ratings may be used as on/off switch

Cannot be reset against overload

W23 has visible trip indicator

Screw termination

Trip-free operation

Thermocouple and thermocouple extension wires are flexible, insulated wires the first used to link a thermocouple to a temperature control device or make the sensing point (or probe) of the thermocouple while the second to extend a thermocouple signal from a probe back to the measuring instrument reading the signal over long distances.

There are different types of thermocouples conctructed from 2 conductor solid core thermocouple grade specified gauge insulated wires with a positive and negative lead and an insulated outer jacket. Types N, K, E, J, T are base metal thermocouple wires  mostly used while Types S, R and B are precious metal thermocouple wires. Common Thermocouple Wire Types are outlined below while their more detailed presentation and characteristics are included in the Product Description section.

K-Type thermocouple (nickel-chromium (nickel-silicon - nickel-aluminum). Base metal thermocouple with strong oxidation resistance with a temperature measurement capability from 0 to 1300 °C.  Main disadvantages include among others a high-temperature stability of thermoelectric potential lower than of N-type and precious metal thermocouples and a poor short-term thermal cycle stability in the range of 250-500 °C.

T-Type thermocouple (copper-copper-nickel). It has the highest accuracy and good uniformity among the base metal thermocouples and an operating temperature between -200 and 350 ℃.

J-Type thermocouple (iron-constantan ). Suitable for reducing or inert atmosphere for vacuum oxidation, and the temperature range from -200 to 800 °C.

N-Type thermocouple (NiCrSi-NiSi). Features of the thermocouple are strong anti-oxidation ability in temperature regulation below 1300 °C, good long-term stability and short-term thermal cycle repeatability, good nuclear radiation resistance, and low-temperature resistance. 

E-Type thermocouple (nickel-chromium-copper-nickel [constantan] thermocouple). Its thermoelectric potential is the highest among the commonly used thermocouples. Often selected for applications in conditions of high sensitivity, low thermal conductivity, and large resistance that can be tolerated. Less sensitive than Type K to corrosion in atmospheres containing higher humidity.

Thermocouple wires of diferent types and wire sizes (Gauges) are offered as part of own labelled (AVIATIONEU NEW ERA) product lines. Priced and sold by the foot and offered in specified or cut to order lengths (usually in 10 ft increments).