
ZEFTRONICS Voltage...
ZEFTRONICS Voltage Regulator with ground fault protection, trouble shooting light, black plastic connector & 16V over voltage protection built in.
These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).
Product Features:
Lightweight, less than 2 oz.
Push/Pull Actuator Thermal Circuit Breaker
0.5 amp to 50 amp ratings may be used as on/off switch
Cannot be reset against overload
W23 has visible trip indicator
Screw termination
Trip-free operation
TE CONNECTIVITY W23-W31 Series Thermal Circuit Breaker TDS
Download (90.12KB)ZEFTRONICS Voltage Regulator with ground fault protection, trouble shooting light, black plastic connector & 16V over voltage protection built in.
Electrodelta (Hartzell Engine Technologies) is the world market leader in top quality voltage regulators for general aviation aircraft, and continues to revolutionize the industry with proven technologies and improvements. The units are assembled from the highest quality electronic components available and are meticulously tested and calibrated to ensure maximum performance.The Electrodelta product line was acquired by by Lamar Technologies LLC in order to add new and alternative parts to the company's product lines.
Military Specification MS35059 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).
FAA-PMA Approved original equipment TCM Bendix magneto ignition switches with 3 positions (Right/Left/Both Mags). They come complete with two keys and faceplate. For dual ignition aircraft systems, ignition switch grounds both magneto P-leads in off position.
The KLIXON® 7277 series circuit breakers are the commercial grade version of the 7274 series circuit breakers which are small, lightweight, low amperage devices that are specifically designed to protect aircraft/aerospace cable and components in airborne vehicles and equipment. The KLIXON® 7277 series circuit breakers are physically and electrically identical to the 7274-2 military grade circuit breakers, with the exception that the 7277 series has wider calibration limits. Klixon® 7277 series breakers have been designed for applications that do not require the tighter performance characteristics and approvals of 7277-2 series military circuit breakers.
Originally developed as an alternative to slow blow fuses, the trip–free 7277 series breakers are used extensively as primary electrical circuit protection on general aviation aircraft. The wider calibration limits of the 7277 has also resulted in applications including protection for data processing and telecommunications equipment, computers, flight simulators, construction, material handling and other industrial,electronic equipment. Suitable for use on trainer / simulator applications where all breakers are operated on low ampere control current, different ampere rating inserts (amp ratings on top of push button) can be ordered.
KLIXON® 7277 series circuit breakers' features include:
• Miniature size
• Light weight
• Trip–free design
• Current rating: 0.5 to 20 amps
• High vibration resistance
• Options include: dust boot (part #14500-1 fits 15/32 bushing, part #14500-5 fits 7/16 bushing), auxiliary switch, terminal hardware, longer push button.
For additional information please consult the supplied documentation.
FINDER 66 Series 30 A Power relays are electromagnetic devices available in DPDT (66.22/66.82) and DPST-NO versions (66.22-x300/66.82-x300) & different variants.
Product Features:
• Reinforced insulation between coil and contacts according to EN 60335-1
• 8 mm creepage and clearance distances
• AC coils & DC coils
• Cadmium Free option available
• ATEX compliant (EX nC) options available
Double Pole Double Throw (DPDT) Changeover (66.22 and 66.82). Commonly used to separate two circuits electrically and connect them magnetically. They are often used to interface an electronic circuit, which works at a low voltage to an electrical circuit which works at a high voltage.
66.22 type with 30 A rated contacts, PCB mount and bifurcated terminals
66.82 type with 30 A rated contacts, Flange mount and Faston 250 connections
Double Pole Single Throw Normally Open (DPST-NO) (66.22-x300 and 66.82-x300). Equivalent of 2 SPST switches (NO Normally Open and NC Normaly Closed) and can be used to switch 2 different loads.
66.22-x300 type with 30 A rated contacts, PCB mount and bifurcated terminals
66.82-x300 type with 30 A rated contacts, Flange mount and Faston 250 connections
ROTAX® aircraft engines form part of the product portfolio of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.
BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.
Different alternators are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).
Aircraft engine parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.
RED BOX® AVIATION, part of the LPA Group, offers a comprehensive range of aircraft ground power equipment including ground power units, aircraft start power units, aircraft connectors and more.Their ground power range or aircraft GPU, are designed for the civilian and military markets, while the majority of their products are also NATO codified.
RED BOX® AVIATION aircraft hand portable start power units (packs) are included among the most powerful hand portable packs worldwide. they are based on military aerospace technology to achieve a very high power to weight ratio. These power packs are designed for starting of piston, turboprop or turbine aircraft and helicopters in the field or in remote locations while RED BOX® units may also be carried safely on board all aircraft. The power packs are “all weather” units and being modular, can be used in single or dual format. They can be used or stored in any orientation, even inverted. Cells used are cleared as non-hazardous cargo for carriage in the aircraft. They are able to operate in extremes of temperature and have excellent standby characteristics. They are maintenance free and do not require cycling. They can be re-celled “on condition” at any RED BOX® service center and are designed to offer years of repeated service. In addition to aviation, these highly portable units can be used with Armored Fighting vehicles and Military equipment. They can be recharged from the automatic charging system, which is supplied in the package, or from any vehicle using a suitable interface.
Product Features:
Offered models in different voltages and amperages
Totally weather protected
Air transportable
Non-hazardous
Maintenance Free
Tough and compact
No memory effect
Works in any orientation
High charge retention
Long shelf life
Fast recharge
No cycling
Leak proof
Aviation grade ELECTRODELTA X61 series solenoids by LAMAR TECHNOLOGIES LLC are offered in continuous or intermitant duty in 12 or 24 Volt. They fit current GA production aircraft as well as legacy aircraft and replace both single terminal switched units, as well as the current double terminal switched units in production today. All units have multiple quality and functional tests prior to certification and delivery. Non FAA-PMA Approved.
Product Features:
Replace most contactors in general aviation
Available in 12 or 24 Volt
Available for Continuous or Intermittent duty
All units inspected and tested to performance standards
Warranty 24 months
The KLIXON® PS series 2 to 35 Amp precision thermal circuit breakers by SENSATA TECHNOLOGIES Inc. (formerly Texas Instruments Sensors & Controls) are designed to interrupt short circuits or overloads and combines trip-free protection with fast response time. They feature a bi-metallic snap-acting disc as the sensing element and they are widely used in production and military aircraft where precise ultimate trip characteristics are required. Models PSM and PSM-N are available in the following ampere ratings 2, 3, 5, 10, 15, 20, 25, 35. When ordering specify if neck-mounting style is wanted by placing “N” after ampere rating. Example: PSM-10N
The KLIXON® PDL series thermal breakers are designed to meet the harshest environmental requirements. They are weatherproof for protection against moisture, dust, grease, fuel vapors, and other harsh environments. For weatherproof circuit breakers in ratings from 50 to 150 amperes, order Model PDLM.
Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.
The P1 momentary switch is a sealed, dustproof, snap action, MIL qualified switch ideal for switching low level up to 10 amps. It features screw terminals, and includes screws, lockwashers, and solder lugs.
Product Features:
MIL qualified
Dustproof, snap action, screw terminals, rugged reliable construction
Threaded or Press Fit Bezel with Black, Red or White Color Button (depending on selected model)
Button sealed with patented “rolling sleeve” principle
Contact area sealed at button & terminals
Less than 25mOhm contact resistance
Ideal for low level switching as well as up to 10 amp duty
Positive tactile feedback
Product Specifications:
Electrical: (at 28VDC or 115VAC, 60/400 Hz.)
Load / Amperes / Life (Normal)
Resistive / 10 / 25,000 cycles
Inductive/Motor / 5 / 25,000 cycles
Lamp / 5 / 25,000 cycles
Fine quality switch from ACS used in many aircraft. The switch housing is machined from billet aluminum which makes this switch 25% lighter. It provides “ON” and “OFF” electrical control of both magnetos on a single engine aircraft. The key-operated switch mounts from the rear of the panel in a 7/8” dia hole. Available with or without starter position. A-510-2 model with starter position is supplied with switch plate two keys. (diode included). FAA PMA Approved. Made in USA.
Since its introduction in 1994, the B&C SPECIALITY PRODUCTS BC320 Starter for Continental engines has established an impressive service record as the ONLY starter design on the market that has provided reliable, long-term service for these engines.
Suitable for installation on Continental engines (C-75, C-85, C-90, C-145-2, O-200, IO-240, O-300-A, -B, and -C, and GO-300-A, -B, and -C) it solves all the problems that other starter designs have had: worn-out clutches, broken pinions, nagging oil leaks, and catastrophic failure modes. Featuring the durability of all-steel gears and heavy-duty ball-bearings, and the efficiency of a high-torque series-wound motor, it provides greater starting torque, while saving 4.3 to 5.2 lbs. over the old key-type and pull-cable type starters (respectively).
The B&C SPECIALITY PRODUCTS BC320 Starter is STC-PMA approved for use in certificated aircraft, and is available with or without the STC (*). Two installation kits are also available: one for replacing a key-type starter (Installation Kit 501-1), the other for replacing a pull-cable type starter (Installation Kit 501-3). For key-type starters, before installing the BC320, you will need to remove the needle bearing pressed into the engine case & install the supplied plug in its place. For pull-cable starters, before installing the BC320, you will need to cut off the 9/16 steel shaft that is installed in your engine case.
Other versions of BC320 Starter for 12v and 24v electrical systems (BC320-2, 12v Counter-Rotating or the 24v BC320-3) are also available.
(*) For the issue of the STC, the aircraft make and model, aircraft registration and serial number are required.
RAY ALLEN (RAC) R2S Rocker Switch provides a very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting and allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75" (44mm) x 1.0" (25mm) x 1.47" (37mm) deep. Self adhesive labels are not included. Sold separately.
Bi-metallic push to reset only thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 30 amp ratings. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).
Product Features:
Push To Reset Only
0.5 amp to 30 amp ratings.
Cannot be manually tripped.
Button extends for visual trip indication.
Push button to reset breaker.
90 Degree Screw-On Terminals
Master Relay (Battery Solenoid) for all homebuilts (not suitable for certified aircraft). Continuous duty. Offered for 12V and 24V systems.
Slick magnetos by CHAMPION AEROSPACE are used on nearly all aircraft piston engines. They exhibit distinct design and operational features outlined below ensuring improved performance and service life.
Smaller and lighter unique design
Radio noise suppression
Lift-off housing
Easy to maintain
OEM Approved for more than 225,000 aviation engines
Service at 500-hour intervals (*)
CHAMPION AEROSPACE Slick magnetos are offered in NEW or FACTORY OVERHAULED condition (**) in a broad range of options. Both can be supplied as exchange units to returned cores and include genuine OEM parts produced and inspected under rigorous procedures to ensure airworthiness and suitability in Slick magnetos. The factory overhauled magnetos are sourced by CHAMPION AEROSPACE authorized overhauling stations and adhere to strict CHAMPION AEROSPACE restrictions on the use of parts and service literature.
For additional information please refer to the Product Description section and the supplied documentation.
(*) In accordance with CHAMPION AEROSPACE Overhaul Manual L-1363F, the magneto should be overhauled at TBO, lightning strike, prop strike, sudden stoppage of the engine and immersion of the aircraft.
(**) NEW EXCHANGE or FACTORY OVERHAULED EXCHAGE Slick magnetos are offered in exchange of an existing customer owned unit (core) for a quick turn around. A refundable core charge is included in the selling price. This is refunded or credited towards future orders with us when a qualified core is returned and its condition is approved by our co-operating supplier within 60 days of the date of the purchase invoice. As a general rule, approvals of core returns for FACTORY OVERHAULED Slick magnetos are granted to cores of the current series of these magnetos while for NEW EXCHANGE Slick Magnetos, cores of older series of Slick magnetos can be considered for credit on a case by case basis. In all cases, the approval of a returned core remains at the exclusive discretion of our co-operating supplier and shipping back to the customer of non-approved cores are subject to additional charges.
These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).
Product Features:
Lightweight, less than 2 oz.
Push/Pull Actuator Thermal Circuit Breaker
0.5 amp to 50 amp ratings may be used as on/off switch
Cannot be reset against overload
W23 has visible trip indicator
Screw termination
Trip-free operation