The PARKER AIRBORNE designs and manufactures motor driven fuel fuel  boost and transfer pumps and is part of the PARKER AEROSPACE GROUP of the PARKER HANNIFIN CORPORATION. These pumps consist standard equipment by the world's leading airframe manufacturers. The PARKER AIRBORNE product range includes:

- In Line fuel pumps for low-flow fuel applications,

- Submerged Centrifugal fuel pumps,

- High Performance Centrifugal fuel pumps for use in turboprop or turbofan jet aircraft,

- Submerged Duplex fuel pumps with two distinct pumping elements

The PARKER AIRBORNE fuel boost pumps use 28 V direct current (DC) to drive a highly efficiency, brushless DC (BLDC) motor or 115.5 V alternating current (AC) three-phase induction motors. The BLDCmotor-driven pumps incorporate integral electronic controllers using Hall Effect sensor rotor-position feedback. The hardware-only controller doe not use any software or programmable logic devices. These pumps feature:

-fuel cooled motor and electronics

-fuel wetted carbon bearings allowing for long-life fluid film design with no rotating shaft seals

-a high efficiency brushless DC (BLDC) motor or a three-phase induction motor

-qualification for high levels of lighting and electromagnetic interference (EMI).

The PARKER AIRBORNE fuel boost pumps can be furnished as either NEW, NEW EXCHANGE or OVERHAUL EXCHANGE. 

Offered pumps in OVERHAUL Condition are supplied in accordance with FAA-approved process specification, come with a FAA Form 8130-3 and can be provided in exchange of existing customer owned units (cores). In all EXCHANGE cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable condition. For additional information please consult the supplied documentation (*) or contact us.

In addition to the PARKER AIRBORNE pumps, RAPCO FAA-PMA approved pumps are also offered as direct replacements  to the respective PARKER AIRBORNE models. The RAPCO replacement pumps can be furnished as either NEW EXCHANGE or OVERHAUL EXCHANGE (please refer to their separate product presentation).

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenance manual, parts catalogue, or equipment list for approved data.

AIRBUS HELICOPTERS is one of the three divisions of EUROPEAN AERONAUTIC DEFENCE AND SPACE CO (EADS), a European aerospace corporation which designs, manufactures and sells civil and military aerospace products worldwide. The other two divisions are  Commercial Aircraft and Defence and Space. AIRBUS civil helicopters, grouped in families range from single- and twin-engine light and medium rotorcraft, up to those in the eleven-ton-class and aim to handle any and all civil missions. Civil range of AIRBUS HELICOPTERS includes:

H125 and H130 intermediate single engine helicopters,

H135 and H145 light twin engine helicopters,

H155 and H160 medium twin engine helicopters,

Eurocopter AS365 Dauphin (formerly known as Aérospatiale SA365 Dauphin 2) medium-weight multipurpose twin engine helicopter,

H175 super medium twin engine helicopter,

H215 and H225 heavy twin engine helicopters

Components and parts for the above helicopters are offered on demand as OEM or PMA parts in NEW or USED condition. These include among others rotables, blades, hardware, structural and engine parts.

PMA parts are generally listed in separate product presentations of their respective manufacturers. 

Please contact us for additional information.

Aircraft braking systems serve a vital function during takeoff, landing and taxiing. Along with landing gear, aircraft wheels and brakes are critical to ensure safe and reliable aircraft ground operations under extreme forces, stress, as well as wear and tear from general operation and the environment. Commercial aircraft brakes are arranged in multiple disk pairs commonly referred to as Heat Sinks or Heat Packs (as they convert the kinetic energy of the moving airplane to heat energy). Initially made metal (steel) heat sinks are gradually replaced by those from carbon fibres (particularly on larger, long-haul commercial airplanes) due to their higher efficiency in braking applications, longer life-span, lower weight and resulting less fuel consumption and lower CO2 emission by the engines. 

Carbon and steel heat packs and parts are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. Sourced from quality suppliers these heat packs  feature high quality, safety, improved design, significant cost savings and fast deliveries. They can be used as  cost effective alternatives in many commercial aircraft platforms equalling or exceeding standards of  respective OEM products by leading manufacturers such as Honeywell Aerospace, Collins Aerospace/Goodrich Wheels & Brakes, Parker Meggitt Aircraft Braking Systems and Safran Landing Systems (formerly Messier-Bugatti-Dowty). They are  PMA approved (*) parts by the Civil Aviation Administration of China (CAAC) for use on an extensive list of Western and Eastern commercial (civil ) aircraft platforms including Boeing, Airbus, McDonnell Douglas, Ilyushin and others and are currently installed in aircraft operating by different air transport operators in China and other countries in the Middle-East, South and Central Asia and Africa.

Typical Aircraft Applications for steel and carbon heat packs include Boeing 737 / 757, Airbus A318 / A319 / A320 / A330 , McDonnell Douglas: MD82 /MD90  Xian MA60 etc. 

(*)  Parts Manufacturer Approval (PMA) is a combined design and production approval granted by a competent Civil Aviation Authority (CAA) to a manufacturer of aircraft parts for modification and replacement. Use of Civil Aviation Administration of China (CAAC) approved parts in other countries depends on existing bilateral agreements between CAAC and respective competent authorities in these countries.

For additional information please contact us.

Bias and radial aircraft tires and matching tire tubes are offered as part of our own labelled (AVIATION NEW ERA) product lines for use in main and nose wheel applications in general aviation, commercial, military aircraft and other projects. 

Sourced from co-operating quality manufacturers holding ISO and other certifications, the AVIATION NEW ERA tires are available in Tube or Tubeless types in different ply ratings, tread patterns and sizes to meet respective rated load and pressure requirements of intended applications. For tube type tires, matching tire inner tubes with different types of valves are also offered. The AVIATIONEU NEW ERA aircraft tires and inner tubes are intended as cost-effective alternate parts to the respective known brands. 

They are approved for use on the respective aircraft in their country of origin and other countries where they are exported depending on signed bilateral agreements between the respective Civil Aviation Authority of the producer and the export country.

All AVIATION NEW ERA tires and inner tubes are supplied with our standard Certificate of Conformance. If other certification is required, please specify at order placement as additional cost may apply.

Please refer to additional information  in the Product Description section for a better understanding of their construction and characteristics, our brief product brochure on aircraft tires and tubes or contact us for additional information.

BRIDGESTONE® CORPORATION is the world's largest manufacturer of tires and other rubber products, delivering a wide range of innovative, premium product portfolio whch includes passanger and light truck tires, motorcycle tires, commercial truck and bus tires, aircraft and mining tires. The company also manufactures industrial rubber and chemical products, sporting goods, and other diversified products. Tires account for 80 percent of Bridgestone Group sales worldwide with sales of tires and other products in more than 150 nations.

BRIDGESTONE® has more than 80 years of experience and insistence on quality in aircraft tire manufacturing. The company supplies new and retread (*) tires to airlines and wheelshops worlwide remaining one of the most trusted brands in the aviation industry.

BRIDGESTONE® range of aircraft tires includes Bias, Radial and Revolutionarily Reinforced Radial Tires (RRR). They work under extremely severe conditions, carrying the weight of an aircraft up to 569 metric tons while accelerating up to 245 mph at takeoff, in addition to enduring varied environmental stress when in flight and taxiing.

The company manufactures its new aircraft tires in Japan while it operates aircraft tire retreading plants in Japan, the United States, Belgium and Hong Kong. Bridgestone provides airlines with seamless, global support for all of their product and maintenance needs in tires. 

BRIDGESTONE® Bias tires feature enhanced tire durability, greater overload durability, reduced weight, new cord and performance improvements due to the integration of Tension Control Optimization (TCOT) and Aircraft Tire Tension Control Optimization (ACOT) Theory principles.

BRIDGESTONE® Radial tires feature lighter design, reduced rolling resistance, rigged belt design, added strength to belt and carcass plies and increased number of landings.

BRIDGESTONE® Revolutionarily Reinforced Radial Tires (RRR) feature superior safety, higher cut resistance, more casing durability after received Foreign Object Damage (F.O.D.), economy, less weight and more landing cycles (improved tire wear). They have been selected by Airbus and Boeing as OE tires for their respective aircraft.

Please refer to the supplied documentation and the Aircraft Tire Application Table for additional information.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

The CJ AVIATION Inc. is a manufacturer of  FAA-PMA approved fuel pumps for more than 20 years as direct replacements (*) for DUKES fuel pumps installed in Beechcraft, Cessna, Diamond, Maule, Mooney, Lake and Navion aircraft. They can be furnished as NEW or NEW EXCHANGE both priced the same except that for NEW pumps there is no core refund/credit. These pumps feature a rigid construction, tighter tolerance design, redesigned motor and longer seal life. They come with certification (FAA Form 8130-3 ) and a two-year warranty or 300 hours, whichever comes first.

In addition, OVERHAULED EXCHAGE (**) fuel pumps are also offered on respective OEM AIRBORNE, DUKES and WELDON models for use in general aviation and experimental aircraft. The overhauled pumps are serviced in accordance with FAA-approved process specification and certified. These pumps are listed under the respective OEM product presentations.

For additional information please contact us.

(*) When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data. 

(**) In the case of NEW EXCHANGE or OVERHAULED EXCHAGE pumps, these are offered in exchange of an existing customer owned unit (core) for a quick turn around. A refundable core charge is included in the selling price. This is refunded or credited towards future orders with us when a qualified core is returned and its condition is approved by CJ AVIATION within 60 days of the date of the purchase invoice.

LEAR ROMEC is a brand of CRANE AEROSPACE & ELECTRONICS for fluid management solutions in aircraft, gas turbine engines and radar cooling systems. The LEAR ROMEC products are suitable for applications in the commercial transport, general aviation, business, regional jet and ground based gas turbine markets.

CRANE AEROSPACE & ELECTRONICS is a world leader in the design and manufacture of high performance, technology, accuracy, and reliability positive displacement pumps, centrifugal pumps and true mass flowmeters, under the company's ELDEC, HYDRO-AIRE and LEAR ROMEC brands, which are used in aerospace and defense applications.

Product lines include:

- Vane type positive displacement lube & scavenge pumps featuring high reliability and volumetric/mechanical efficiency, excellent flow performance at high altitude/low inlet pressures, excellent priming performance, lowest weight option for high flow pumps (such as Geared Turbofan) and high contamination wear resistance,

- Fuel Flow Transmitters (FFT) for aircraft engines featuring a +/-0.5% accuracy performance of flow point in the engine cruise range, form factor and flow conditioning for difficult installations,

- Centrifugal pumps for fuel, water and coolant applications of different drive types including gearbox driven, hydraulic motor driven, 400 Hz fixed frequency AC, 28 VDC brush and brushless, and 270 VDC brushless. Like the lube & scavenge pumps, these pumps are characterised by high reliability and volumetric/mechanical efficiency, priming performance and contamination wear resistance.

LEAR ROMEC customer owned fuel pumps can be overhauled or offered in overhaul/exchange condition for immediate shipment. In case of no core returns, core charges apply. Please see below an indicative list of available LEAR ROMEC fuel pumps for overhaul/ exchange or contact us for additional information.

LEAR ROMEC Part Numbers: 

RG15980 | RG15980P 

RG17980 | RG17980A | RG17980A/M | RG17980/M | RG17980D | RG17980D/M | RG17980E | RG17980E/M | RG17980J | RG17980J/M | RG17980K | RG17980K/M | RG17980P | RG17980P/M | RG17980U | RG17980U/M

RG9080F1 | RG9080F1/M | RG9080F2 | RG9080F2/M | RG9080G1 | RG9080G1/M | RG9080G2 | RG9080G2/M| RG9080H1 | RG9080H1/M | RG9080H2/M | RG9080J1 | RG9080J1/M | RG9080J4A | RG9080J4A/M | RG9080J6A | RG9080J6A/M | RG9080J7A | RG9080J7A/M | RG9080J8A | RG9080J8A/M

RG9570K1 | RG9570K1/M | RG9570K2 | RG9570K2/M | RG9570K3 | RG9570K3/M | RG9570K4 | RG9570K4/M | RG9570P1 | RG9570P1/M

The DUKES AEROSPACE Inc. is a manufacturer of  fuel pumps for general aviation and corporate aircraft.  DUKES fuel pumps are used in a range of aircraft such as Beechcraft, Cessna, Diamond, Maule, Mooney, Lake and Navion aircraft. The company is a subsidiary of AERO FLUID PPRODUCTS, part of TransDigm Group Inc.

The DUKES AEROSPACE fuel pumps are offered as NEW, OVERHAULED or OVERHAULED EXCHAGE (in the second case, in exchange of existing customer owned unit (core) for a quick turn around). Overhaul pumps are serviced in accordance with FAA-approved process specification and certified (FAA Form 8130-3) by authorized repair stations such as QUALITY AIRCRAFT ACCESSORIES, the exclusive DUKES AEROSPACE  authorized overhaul facility for General Aviation fuel pumps,  RAPCO FLEET SUPPORT SERVICES division or CJ AVIATION. In the case of exchanged pumps,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a serviceable condition. 

Additionally, FAA-PMA approved direct replacement fuel pumps to the respective DUKES AEROSPACE  models are offered. They are made by reputable manufacturers such as CJ AVIATION and offered as NEW or NEW EXCHANGE (please refer to their separate product presentations). For additional information please consult the supplied documentation of our offered products (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation, consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.

DUNLOP AIRCRAFT TYRES manufactures several different types of aircraft tIre for many applications: bias tIres for modern jet and military aircraft, radial tires for military jets, bias tires for helicopters and chined tyres used for nose wheel applications primarily on rear-engined jet aircraft   Different tire size designations grouped into various 'types' are also used such as Type III mainly for low-pressure service on older piston-driven aircraft or Type VII related to high-pressure tires with high load capacity designed for modern jet and turboprop aircraft. All DUNLOP aircraft tires are manufactured in accordance with TSO-C62, MIL-PERF-5041 or AIR8505A and/or applicable airframe manufacturer specifications.

DUNLOP aircraft tires are offered as NEW or RETREAD ( the second designated by the letters "RT" after the product reference number (SKU).

DUNLOP does not mandate a maximum shelf life for its tires, so long as the storage conditions are met. The company recommends that tires be kept in a store for no more than 12 years from their date of manufacture, if they are to stay serviceable.

DUNLOP aircraft tires have a warranty of 12 months from the date of their delivery. The company undertakes at its option to repair or replace them or refund the customer for any of the tires which are defective by reason of defective material, design or workmanship.

DUNLOP AIRCRAFT TYRES also produces aircraft inner tubes manufactured to rigorous standards which meet or exceed all commercial and military performance requirements, including MIL-I-5014 military specification (except for packaging).

They are made from natural rubber which ensures maximum life and meets cold temperature performance requirements.

DUNLOP inner tubes are factory balanced. The heavy spot is marked in red. If there is no red mark, the valve is considered the heavy spot. The valve stem, core and cap are manufactured for aircraft use and designed for high and low pressure requirements.

For additional information on DUNLOP AIRCRAFT TYRES  products please consult the supplied Guide and tire specification sheets.

GOODYEAR® AVIATION tires are widely used in all aviation tire market segments, from piston engine light aircraft to turboprops, business jets, regional and commercial airlines.They come in different series meeting respective economy, performance or special operations' application requirements. Offered in NEW or USED (RETREAD) (*) Condition.

GOODYEAR® AVIATION FLIGHT SPECIAL® ΙΙ Series aircraft  tires are popular replacement tires for light aircraft due to their unsurpassed combination of value and performance. Designed for long tread life, they are built to last. They feature quality construction, wide rib thread design and large footprint, tough-wearing thread rubber and triple-tempered nylon casing cord resulting in enhanced traction, uniform wear and extended service life.

GOODYEAR® AVIATION FLIGHT CUSTOM® ΙΙI Series "Top of the Line" aircraft  tires set new records for long wear, high-strength and dependability. They feature dual polymer tread compound, enlarged tread contact area, extra-wide aquachannel grooves, sculptured sidewalls and Kevlar® belts for added tread stability. Benefis from their use include up to 20% more landings, superior wet traction treadwear and enhanced traction and treadwear assisting dimensional stability. 

GOODYEAR® AVIATION FLIGHT EAGLE® Series are industry’s preferred business jet tires. FLIGHT EAGLE® LT tires are designed for very light and light jet applications featuring tough, cool-running tread compound, robust, 6-ply bead area, 2-groove tread design, sidewall with antioxidants to help fight ozone and special wear-resistant tread compounds.

GOODYEAR® AVIATION FLIGHT LEADER® Series tires are the bias-ply choice for commercial aircraft. They feature a bias-ply construction, a specialized cord body shape and a specially compounded tread design and large contact area. They offer high speed performance and greater load capacity but also reduced stress as the tire cycles from tension to compression. They can be used in a wide range of operating conditions and aircraft applications.

For additional information please refer to the supplied documentation or contact us.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

INTERCONNECT SOLUTIONS COMPANY (ISC) is a manufacturer of cables, cable assemblies, harnesses, and control panels which are used in a wide range of applications in Commercial and Military Aircraft, Lifesaving Medical Devices, Weapon Systems, Inflight Entertainment and Power Systems. The company is a supplier of Boeing and Airbus for their commercial aircraft. 

Automatic portable radio beacons (ELT(AP) АРМ-406П (ARM-406P), АРМ-406П1 (ARM-406P1) and АРМ-406АС1 (ARM-406AC1) are safety devices designed to transmit via satellite to the stations COSPAS-SARSAT distress radio signals with aircraft coordinates received from the onboard computer system.Such information facilitie identification of the aircraft and guidance of S&R facilities to the accident site. Located in the aircraft cabin these devices offer the possibility of quick use in an emergency.

The automatic portable radio beacon АРМ-406П1 (APM-406P1) includes:

- monoblock P, consisting of a double protective casing with shock absorbers installed in it, an overload sensor (DP) and an AC1A monoblock;

- remote control PDU-406 (ПДУ-406) installed in the cockpit;

- external antenna ANT-406VA (АНТ-406ВА), mounted on the aircraft body.

The АС1А monoblock is  a portable radio beacon, including a PM-AC1A (ПМ-АС1А) transmitting module, an АРМ-043-01 autonomous power supply unit and an ANT-APM-01 (АНТ-АРМ-01) antenna. The emergency mode of operation of the AC1A monoblock can be switched on both from the remote control and from the DP, as well as manually when removing it from the protective casing when leaving the emergency aircraft.

Autonomous power supply (APS) units are also offered for use with the radio beacons. АРМ-043 (CDKT.436140.590) 14.4V are intended for use for beacons manufactured before 2013 while АРМ-043-01 (CDKT.436140.590-01) 10.8V for beacons manufactured after 2013. Unless otherwise specified their replacement frequency is once every 3 years with a 3-year self life.

For additional information please refer to the supplied documentation or contact us.

 Automatic flight control systems (AFCS) are aircraft autopilot systems with many integrated features initially found only on high-performance aircraft but nowadays installed on modern aircraft of any size. Their capabilities vary from system to system with some AFCS offering advanced features beyond ordinary autopilot systems regarding programmability, the level of integration of navigational aids, the integration of flight director and autothrottle systems, and combining of the command elements of these various systems into a single integrated flight control human interface.

LEONARDO HELICOPTERS provides aircraft manufacturers with solutions ranging from single axis or secondary flight control computers and electronics to complete integration of flight control systems. The flight control system architecture spans from simplest architecture, lowest complexity up to full authority fly-bywire architecture, offering the following advantages:

• Compatibility with various actuation technologies (Hydraulics, Mechanical, Electro-Mechanical)

• Eased certification process (EASA Form 1 already achieved)

• Reduced integration cost and schedule risk (building blocks)

The Flight Control Systems (FCS), used to control the control surfaces of the aircraft, are based on:

• Flight Control Computer (FCC)

• APSW (Autopilot).

• Building blocks of dual, dual-duplex, triplex and quadruplex FCS architecture. 

Apart from new, LEONARDO older FCS are also offered in NEW SURPLUS or USED conditions (Serviceable or Overhauled). For additional information please consult the supplied documentation or contact us.

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

MICHELIN® AIR® X® Aviation Radial Tires are currently mounted on a wide range of commercial, military and corporate aircraft. Given the numerous advantages they offer over conventional bias-ply tires, these tires have elevated the basic performance expectations for aircraft tires, the same way MICHELIN® radials raised the standards for automobile tires. Offered in NEW or USED (RETREAD) (*) Condition. Compared to bias tires, MICHELIN® AIR® X® radials offer:

Measurable Fuel Savings

More Landings Per Tread

Improved Cut Resistance

Key features of MICHELIN® AIR® X® radials include:

Light Weight Radial Design. They typically weigh 20–30% less than comparable bias tires, and they operate at cooler temperatures. This leads to measurable fuel savings, more landings per tread, longer wear characteristics and a more stable contact patch than bias tires, as well as shorter turnaround times and reduced carcass fatigue.

Extra Strong Carcass. Michelin’s carcass design helps restrict tire growth and the stretching of rubber resulting in better cut resistance than bias tires.

Optimized Tread. Durable cut-resistant tread includes deep skid depth and specially-designed circumferential grooves. This contributes to an extended tire life, less heat build up and lower maintenance costs due to fewer tire changes.

Customized Rubber Compounds. Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides maximum amount of exterior wear and crack resistance for a long tire life.

Flexible Casing. The casings of MICHELIN® AIR® X® radials is more flexible than casings used in bias tires. This results in noticeably smooth operating characteristics during taxiing, landing and takeoffs.

Please refer to the supplied documentation and the Reference & Application Chart for additional information.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

Michelin® AIR® Aircraft Tires offer just the right balance of performance and durability required by demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelin’s toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the “Posi-Fit” bead construction reduces movement between the tire and the wheel for improved lateral stability. Offered in NEW or USED (RETREAD) (*) Condition.

Michelin® AIR® Aircraft Tires are designed to provide:

- a very long tire life and lower maintenance costs due to fewer tire changes

- exceptional balance for smooth taxiing,even wear, and heat resistance

- maximum protection against sidewall cracking caused by ozone and UV light

- excellent lateral stability and impact absorption, even under rough landing conditions

Product Features:

Deep Tread Depth: Thick rubber in the tread area helps provide for a long tire life. Contributes to lower maintenance costs due to fewer tire changes.

Unique Bead Construction: Provides a firm (tight) fit to help reduce movement between the tire and wheel. Helps improve lateral stability for a long tire life, even under rough landing conditions

Optimized Casing Design: Proprietary Michelin production processes help balance stresses within the tire structure. Strong, yet lightweight nylon cords are designed to exceed strict industry standards for overpressure strength. Results in an effi cient, lightweight product with excellent balance properties for smooth taxiing, even wear, and resistance to heat buildup for a long tire life.

Customized Rubber Compounds: Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides our maximum amount of exterior wear and crack resistance for a long tire life.

Contoured Shoulder Design: Helps absorb lateral impacts associated with landing. Designed to help the tire achieve a full life, even under adverse conditions.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

Modern reciprocating-engine aircraft (especially large and high-performance ones) use electrically operated auxiliary fuel  boost and transfer pumps  to keep fuel moving toward the aircraft engine or move fuel between tanks to balance aircraft weight. Centrifugal boost pumps,  electric motor driven,  are the most common type and  are used to supply,back up the engine-driven fuel pump or transfer fuel between tanks if the aircraft is so designed. They are  most frequently  submerged in the fuel tank or located just outside of the bottom of the tank with the inlet of the pump extending into the tank. Cartridge/canister or in-tank mounted pumps supply fuel to the aircraft engine while reverse flow through the pump is prevented by check valves. The cartridge/canister design allows removal of the pump cartridge without draining the fuel tank. If the pump is mounted outside the tank, a pump removal valve is typically installed so the pump can be removed without draining the fuel tank.

The RAPCO FAA-PMA approved pumps are offered as direct replacements of the respective pumps by OEMs  such as PARKER AIRBORNE or DUKES (please refer to their separate product presentations). The letters " RA" in the beginning of the RAPCO part number are used to denote the correlation of RAPCO part number to the OEM part number. They incorporate modern design, materials, and manufacturing processes to provide high quality and performance fuel pumps at competitive prices. 

These pumps can be furnished  as NEW or OVERHAUL EXCHANGE, namely new or overhauled pumps in exchange of existing customer owned units (cores). In all exchange cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable serviceable condition. In the case of overhauled pumps, these are overhauled in accordance with FAA-approved process specification and come with a FAA Form 8130-3. All  RAPCO fuel pumps are thoroughly tested for guaranteed pump performance, with a worldwide distribution and a full warranty (same as OEM). For additional information please consult the supplied documentation (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.   

Mil Moscow Helicopter Plant (Russian: Московский вертолётный завод им. М.Л. Миля) is a subsidiary of RUSSIAN HELICOPTERS JSC designing and manufacturing helicopters with particular expertise in heavy-lift helicopters. The company has developed both civil and military versions in a wide range of payload capacities, including the world's largest in serial production, the Mi-26. Mil participates in the Euromil joint venture with Eurocopter.

Components and spare parts are available from our suppliers and offered for Mil helicopters including but not limited to Mil Mi-6 heavy transport helicopter, Mil Mi-8 multi-purpose helicopter mostly used for transport missions, Mil Mi-17  medium twin turbine transport helicopter (also known as Mi-8M) and Mi-171 export version of the Mi-8AMT.

Please also refer to the Product Description section and the supplied documentation for additional information on variants currently in operation and spare parts' availability.

Aircraft wheels and braking systems serve a vital function during takeoff, landing and taxiing. Along with landing gear, aircraft wheels and brakes are critical to ensure safe and reliable aircraft ground operations under extreme forces, stress, as well as wear and tear from general operation and the environment. 

Aircraft brakes are arranged in multiple disk pairs, which are commonly referred to as brake Heat Sink. As aircraft brakes convert the kinetic energy of the moving airplane to heat energy, they are also referred to as Heat Packs made of steel or carbon fibres. Conventional metal (steel) brakes are gradually replaced by carbon brakes (particularly on larger, long-haul commercial airplanes) due to their higher efficiency in braking applications, lower weight and resulting less fuel consumption and lower CO2 emission by the engines. 

Commercial aircraft wheels and braking systems are produced by by leading manufacturers such as Honeywell Aerospace, Collins Aerospace/Goodrich Wheels & Brakes, Parker Meggitt Aircraft Braking Systems and Safran Landing Systems (formerly Messier-Bugatti-Dowty) and offered as OEM products/parts for an extensive list of commercial aircraft platforms.  For more information on different OEM products please refer to the Product Description section, the supplied documentation or contact us.

Carbon and steel heat packs are also offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  PMA approved (*) parts by the Civil Aviation Administration of China (CAAC) for use on an extensive list of Western and Eastern commercial (civil ) aircraft platforms including Boeing, Airbus, McDonnell Douglas, Ilyushin and others. Sourced from quality suppliers they are available in an extensive product range, consist cost effective alternatives equalling or exceeding standards of the respective OEM products and feature high quality, safety, improved design, significant cost savings and fast deliveries. For more information on AVIATIONEU NEW ERA PMA brake heat packs please consult our separate product presentation or contact us.