Aviation grade ELECTRODELTA X61 series solenoids by LAMAR TECHNOLOGIES LLC are offered in continuous  or intermitant duty in 12 or 24 Volt. They fit current GA production aircraft as well as legacy aircraft and replace both single terminal switched units, as well as the current double terminal switched units in production today. All units have multiple quality and functional tests prior to certification and delivery. Non FAA-PMA Approved.

Product Features:

Replace most contactors in general aviation

Available in 12 or 24 Volt

Available for Continuous or Intermittent duty

All units inspected and tested to performance standards

Warranty 24 months

Electrodelta (Hartzell Engine Technologies) is the world market leader in top quality voltage regulators for general aviation aircraft, and continues to revolutionize the industry with proven technologies and improvements. The units are assembled from the highest quality electronic components available and are meticulously tested and calibrated to ensure maximum performance.The Electrodelta product line was acquired by by Lamar Technologies LLC in order to add new and alternative  parts to the company's product lines.

 Automatic flight control systems (AFCS) are aircraft autopilot systems with many integrated features initially found only on high-performance aircraft but nowadays installed on modern aircraft of any size. Their capabilities vary from system to system with some AFCS offering advanced features beyond ordinary autopilot systems regarding programmability, the level of integration of navigational aids, the integration of flight director and autothrottle systems, and combining of the command elements of these various systems into a single integrated flight control human interface.

LEONARDO HELICOPTERS provides aircraft manufacturers with solutions ranging from single axis or secondary flight control computers and electronics to complete integration of flight control systems. The flight control system architecture spans from simplest architecture, lowest complexity up to full authority fly-bywire architecture, offering the following advantages:

• Compatibility with various actuation technologies (Hydraulics, Mechanical, Electro-Mechanical)

• Eased certification process (EASA Form 1 already achieved)

• Reduced integration cost and schedule risk (building blocks)

The Flight Control Systems (FCS), used to control the control surfaces of the aircraft, are based on:

• Flight Control Computer (FCC)

• APSW (Autopilot).

• Building blocks of dual, dual-duplex, triplex and quadruplex FCS architecture. 

Apart from new, LEONARDO older FCS are also offered in NEW SURPLUS or USED conditions (Serviceable or Overhauled). For additional information please consult the supplied documentation or contact us.

An extensive range of standard MIL-SPEC and Cessna pulleys and pulley kits is offered by McFARLANE® AVIATION. The kits contain all pulleys and cotter pins required to replace all flight control system pulleys in one airplane containing the respective part numbers and quantities required. Different McFarlane pulley series include: 

MCS378 Series phenolic flight control pulleys with ball bearings, FAA-PMA approved replacements for the Cessna S378, A-/BB-, and NAS383- series pulleys on Cessna Aircraft. The MCS378- series pulleys supersede these for most Cessna aircraft applications and  feature high quality sealed precision ball bearings, superior to low grade, open seal bearings used in the Cessna S378-()L light duty series pulleys that they replace.

MS20219 Series aircraft secondary control pulleys, superseding the respective AN219 series pulleys are offered either with high pressure laminated phenolic sheave (MS20219 Series) or aluminum alloy sheave anodized per MIL-A-8625 (MS20219A Series), both with fixed ball bearing with contact seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley should not be installed in flight control systems.

MS20220 Series flight control pulleys with phenolic body and ball bearings with seal. These supersede the respective AN220- Series pulleys. Also available with aluminum body (MS20220A).

MS24566 Series phenolic flight control pulleys with ball bearings. MS24566 pulleys can be used to replace the corresponding AN210 pulleys designated by the letters "A" or "B" in their dash numbers as they differ in the maximum load limit.

NAS383 Series phenolic commercial grade pulleys with graphite impregnated bronze sleeve bearings. These are typically used with a bushing. The MCS378 pulley replaces both the NAS383 pulley and it's bushing.

S394, S1052-1/ S1710-1 Cessna nylon pulleys with no bearings.

S378-4S Cessna pulley similar to S378-4 but with smaller diameter. Used on Cessna airplanes 177RG s/n 177RG0202 and on, and F177RG0038 and on for routing stabilator, stabilator trim, and rudder cables. Six required per aircraft.

1660433 Series Cessna phenolic pulleys with ball bearings.

MS24665 series cotter pins are also available with the pulley kits or separately in packs of 10 or 25.

Please refer to the individual product presentations, the respective charts provided for specifications and cross-reference information or contact us.

McFARLANE® AVIATION MS27975-1 fork rod end is internally threaded 1/4"-28 to fit threaded 1/4" diameter rod. Manufactured from 4130 steel. Used for engine controls.

Stainless Steel Single Shank Ball for swaging on to wire rope and aircraft cable. Used to terminate aircraft cable ends. Conforms to Mil Specification MS20664C. Available in different breaking strengths (lbs), hole diameters (in.) and for differnt cable sizes (in.).

An extensive range of standard MIL-SPEC and Cessna pulleys and pulley kits is offered by McFarlane Aviation. The kits contain all pulleys and cotter pins required to replace all flight control system pulleys in one airplane containing the respective part numbers and quantities required. Different McFarlane pulley series include: 

MCS378 Series phenolic flight control pulleys with ball bearings, FAA-PMA approved replacements for the Cessna S378, A-/BB-, and NAS383- series pulleys on Cessna Aircraft. The MCS378- series pulleys supersede these for most Cessna aircraft applications and  feature high quality sealed precision ball bearings, superior to low grade, open seal bearings used in the Cessna S378-()L light duty series pulleys that they replace.

MS20219 Series aircraft secondary control pulleys, superseding the respective AN219 series pulleys are offered either with high pressure laminated phenolic sheave (MS20219 Series) or aluminum alloy sheave anodized per MIL-A-8625 (MS20219A Series), both with fixed ball bearing with contact seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley should not be installed in flight control systems.

MS20220 Series phenolic flight control pulleys with ball bearings. These supersede the AN220- Series pulleys of like dash number.

MS24566 Series phenolic flight control pulleys with ball bearings. MS24566 pulleys can be used to replace the corresponding AN210 pulleys designated by the letters "A" or "B" in their dash numbers as they differ in the maximum load limit.

NAS383 Series phenolic commercial grade pulleys with graphite impregnated bronze sleeve bearings. These are typically used with a bushing. The MCS378 pulley replaces both the NAS383 pulley and it's bushing.

S394, S1052-1/ S1710-1 Cessna nylon pulleys with no bearings.

S378-4S Cessna pulley similar to S378-4 but with smaller diameter. Used on Cessna airplanes 177RG s/n 177RG0202 and on, and F177RG0038 and on for routing stabilator, stabilator trim, and rudder cables. Six required per aircraft.

1660433 Series Cessna phenolic pulleys with ball bearings.

MS24665 series cotter pins are also available with the pulley kits or separately in packs of 10 or 25.

Please refer to the individual product presentations, the respective charts provided for specifications and cross-reference information or contact us.

An extensive range of standard MIL-SPEC and Cessna pulleys and pulley kits is offered by McFarlane Aviation. The kits contain all pulleys and cotter pins required to replace all flight control system pulleys in one airplane containing the respective part numbers and quantities required. Different McFarlane pulley series include: 

MCS378 Series phenolic flight control pulleys with ball bearings, FAA-PMA approved replacements for the Cessna S378, A-/BB-, and NAS383- series pulleys on Cessna Aircraft. The MCS378- series pulleys supersede these for most Cessna aircraft applications and  feature high quality sealed precision ball bearings, superior to low grade, open seal bearings used in the Cessna S378-()L light duty series pulleys that they replace.

MS20219 Series aircraft secondary control pulleys, superseding the respective AN219 series pulleys are offered either with high pressure laminated phenolic sheave (MS20219 Series) or aluminum alloy sheave anodized per MIL-A-8625 (MS20219A Series), both with fixed ball bearing with contact seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley should not be installed in flight control systems.

MS20220 Series phenolic flight control pulleys with ball bearings. These supersede the AN220- Series pulleys of like dash number.

MS24566 Series phenolic flight control pulleys with ball bearings. MS24566 pulleys can be used to replace the corresponding AN210 pulleys designated by the letters "A" or "B" in their dash numbers as they differ in the maximum load limit.

NAS383 Series phenolic commercial grade pulleys with graphite impregnated bronze sleeve bearings. These are typically used with a bushing. The MCS378 pulley replaces both the NAS383 pulley and it's bushing.

S394, S1052-1/ S1710-1 Cessna nylon pulleys with no bearings.

S378-4S Cessna pulley similar to S378-4 but with smaller diameter. Used on Cessna airplanes 177RG s/n 177RG0202 and on, and F177RG0038 and on for routing stabilator, stabilator trim, and rudder cables. Six required per aircraft.

1660433 Series Cessna phenolic pulleys with ball bearings.

MS24665 series cotter pins are also available with the pulley kits or separately in packs of 10 or 25.

Please refer to the individual product presentations, the respective charts provided for specifications and cross-reference information or contact us.

An extensive range of standard MIL-SPEC and Cessna pulleys and pulley kits is offered by McFARLANE® AVIATION. The kits contain all pulleys and cotter pins required to replace all flight control system pulleys in one airplane containing the respective part numbers and quantities required. Different McFarlane pulley series include: 

MCS378 Series phenolic flight control pulleys with ball bearings, FAA-PMA approved replacements for the Cessna S378, A-/BB-, and NAS383- series pulleys on Cessna Aircraft. The MCS378- series pulleys supersede these for most Cessna aircraft applications and  feature high quality sealed precision ball bearings, superior to low grade, open seal bearings used in the Cessna S378-()L light duty series pulleys that they replace.

MS20219 Series aircraft secondary control pulleys, superseding the respective AN219 series pulleys are offered either with high pressure laminated phenolic sheave (MS20219 Series) or aluminum alloy sheave anodized per MIL-A-8625 (MS20219A Series), both with fixed ball bearing with contact seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley should not be installed in flight control systems.

MS20220 Series phenolic flight control pulleys with ball bearings. These supersede the AN220- Series pulleys of like dash number.

MS24566 Series phenolic flight control pulleys with ball bearings. MS24566 pulleys can be used to replace the corresponding AN210 pulleys designated by the letters "A" or "B" in their dash numbers as they differ in the maximum load limit.

NAS383 Series phenolic commercial grade pulleys with graphite impregnated bronze sleeve bearings. These are typically used with a bushing. The MCS378 pulley replaces both the NAS383 pulley and it's bushing.

S394, S1052-1/ S1710-1 Cessna nylon pulleys with no bearings.

S378-4S Cessna pulley similar to S378-4 but with smaller diameter. Used on Cessna airplanes 177RG s/n 177RG0202 and on, and F177RG0038 and on for routing stabilator, stabilator trim, and rudder cables. Six required per aircraft.

1660433 Series Cessna phenolic pulleys with ball bearings.

MS24665 series cotter pins are also available with the pulley kits or separately in packs of 10 or 25.

Please refer to the individual product presentations, the respective charts provided for specifications and cross-reference information or contact us.

McFARLANE® AVIATION MC0543022-2 Series FAA-PMA approved nose wheel steering rods s are intended for use on for Cessna 172 series aircraft replacing respective OEM steering rod,tube assemblies.They feature new re-designed long-life springs, hardened internal washer for greater durability, stainless steel tubes for improved corrosion resistance  and optimum performance even after years of service.

Cessna Models' Application List:

172D,E,F,G,H,I,K,L,M,P

P172,

R172K

F172D,E,F,G,H,K,L,M,N,P

FP172

FR172E,F,G,H,J,K

172R

172S

McFARLANE® AVIATION manufactures FAA PMA approved fuel quantity transmitters which can be used as direct replacements for originally installed Stewart Warner type fuel quantity transmitters. Use of McFARLANE® AVIATION transmitters eliminates the need for expensive transmitter conversion kits that require replacement of fuel gauges and wiring. They are engineered to be compatible with the original fuel quantity gauge and wiring which uses time proven technology and reliability. Major benefits include higher accurancy, durability, long service life but also significant cost savings as no modifications are required.

McFARLANE® AVIATION fuel quantity transmitters can be sold individually or in kits including the transmitter, gasket(s), and screw/seal assemblies as applicable.

Please consult the supplied documentation for additional information.

The Series 16 from MECHANICAL PRODUCTS (MP) is a proven reliable, single-pole thermal circuit breaker with a robust design. This series is suitable for diverse applications such as medical equipment, uninterruptible power systems (UPS), portable generators, welders, industrial cleaning equipment, and transportation. These heavy duty circuit breakers are ideal for use with aircraft alternators and other applications using high amperage.

This new MERCURY MARINE Mercruiser replacement Trim Pump replaces the older P/N 14336A17 trim pump. Used on MERCURY MARINE Mercruiser Alpha One, Alpha Gen II and Bravo Drive applications. Matched to the larger new style trim cylinders.

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

Michelin® AIR® Aircraft Tires offer just the right balance of performance and durability required by demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelin’s toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the “Posi-Fit” bead construction reduces movement between the tire and the wheel for improved lateral stability. Offered in NEW or USED (RETREAD) (*) Condition.

Michelin® AIR® Aircraft Tires are designed to provide:

- a very long tire life and lower maintenance costs due to fewer tire changes

- exceptional balance for smooth taxiing,even wear, and heat resistance

- maximum protection against sidewall cracking caused by ozone and UV light

- excellent lateral stability and impact absorption, even under rough landing conditions

Product Features:

Deep Tread Depth: Thick rubber in the tread area helps provide for a long tire life. Contributes to lower maintenance costs due to fewer tire changes.

Unique Bead Construction: Provides a firm (tight) fit to help reduce movement between the tire and wheel. Helps improve lateral stability for a long tire life, even under rough landing conditions

Optimized Casing Design: Proprietary Michelin production processes help balance stresses within the tire structure. Strong, yet lightweight nylon cords are designed to exceed strict industry standards for overpressure strength. Results in an effi cient, lightweight product with excellent balance properties for smooth taxiing, even wear, and resistance to heat buildup for a long tire life.

Customized Rubber Compounds: Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides our maximum amount of exterior wear and crack resistance for a long tire life.

Contoured Shoulder Design: Helps absorb lateral impacts associated with landing. Designed to help the tire achieve a full life, even under adverse conditions.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

MICHELIN® AIR® X® Aviation Radial Tires are currently mounted on a wide range of commercial, military and corporate aircraft. Given the numerous advantages they offer over conventional bias-ply tires, these tires have elevated the basic performance expectations for aircraft tires, the same way MICHELIN® radials raised the standards for automobile tires. Offered in NEW or USED (RETREAD) (*) Condition. Compared to bias tires, MICHELIN® AIR® X® radials offer:

Measurable Fuel Savings

More Landings Per Tread

Improved Cut Resistance

Key features of MICHELIN® AIR® X® radials include:

Light Weight Radial Design. They typically weigh 20–30% less than comparable bias tires, and they operate at cooler temperatures. This leads to measurable fuel savings, more landings per tread, longer wear characteristics and a more stable contact patch than bias tires, as well as shorter turnaround times and reduced carcass fatigue.

Extra Strong Carcass. Michelin’s carcass design helps restrict tire growth and the stretching of rubber resulting in better cut resistance than bias tires.

Optimized Tread. Durable cut-resistant tread includes deep skid depth and specially-designed circumferential grooves. This contributes to an extended tire life, less heat build up and lower maintenance costs due to fewer tire changes.

Customized Rubber Compounds. Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides maximum amount of exterior wear and crack resistance for a long tire life.

Flexible Casing. The casings of MICHELIN® AIR® X® radials is more flexible than casings used in bias tires. This results in noticeably smooth operating characteristics during taxiing, landing and takeoffs.

Please refer to the supplied documentation and the Reference & Application Chart for additional information.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

FLYBOX® brand  by MICROEL SRL relates to a wide range of avionics and flight instruments specialy designed and developed for ultralight and experimental aircraft. FLYBOX® product portfolio includes 

My-EMS & Vigilus Engine Monitoring Systems

Engimaster EMS Engine Monitoring Systems

Oblò,  Oblò 2 and Eclipse NG Electronic Flight Instrument Systems (EFIS)

Omnia 57 and 80 Series of Legacy Instruments/Indicators

FLYBOX® Autopilot Systems

Flap & Propeller Controllers

For further information please refer to the Product Description section & the supplied documentation.

MATCO mfg manufactures an extensive range of master cylinders for brake applications. MATCO mfg's MCMC-4 master cylinders use a REMOTE reservoir and are offered in different models. They can be mounted vertically or horizontally (Universal) to the exterior reservoir and can be used in individual or dual brake applications. They use a  0.625 inch diameter piston and Buna-n o-rings. Mil-H-5606 aircraft hydraulic fluid or compatible fluids are reccomended. DOT5 may be used but not DOT5.1 which contains glycol. DOT3 and DOT4 may not be used and will cause immediate damage to the seals. Tested to a maximum of 1200 psi. Normal operation: 400-600 psi. The MCMC-4 has an adjustable clevis.

MCMC-4 Product Features & Specifications:

Umiversal - Vertical or horizontal mounting with exterior reservoir.

Buna-n orings 

Measures 8.05 +-0.25 inches from end to end.

Measures 7.5 +-0.25 inches from mounting hole to mounting hole.

A 0.625 inch diameter piston is used.

Stroke is approximately 1.388 inches.

Displacement is 0.43 cubic inches.

The ports on all MATCO mfg master cylinders are 1/8 inch NPT (except the MC-4E).

MCMC4A is 0.50 inch shorter that the MCMC-4.

5 inch wheel with 4.3 inch width with an additional 1.39 inch caliper spacing. 

MATCO mfg's PVPV series parking brake valves have been designed for installation in a wide variety of homebuilt aircraft applications due to their light weight and easy in-line installation . In-line installation can be used in conjunction with either a single or dual parking brake system set- up with the respective use of valves  PVPV-S or PVPV-D available in single or double sided configuration.

NEWTON CONSULTING offers a range of SPRL branded fuel valves featuring distinct features that make them better than the rest. Ceramic disks have no soft moving/rubbing seals to wear out, unlike other valves but also give an 'indefinite' life with a very smooth light action. The lift and turn selector of their SPRL valves is instinctive, secure, and easier to use than the complex 'lift button' type. The locking detents avoid accidental movements. The fixings match most installations, and the internal ports prevent cross feeds, unless 'selected to 'Both'. NEWTON offered valves range from simple V1 and V3, designed to minimise stockholding costs to V6, tapped 10mm for standard Rotax banjo's on the input and 1/4" nps output or V9 and V10 duplex valves, threaded 1/4"nps which will accept 1/4"npt fittings and NEWTON AN-6 banjo assembly.Their lightweight alloy construction is anodized for protection while the Viton O-ring seals are suitable for all current fuels. 

NEWTON also offers a variety of adaptors/fittings (purchased separately) which can be used with these valves as normal AN fittings will not fit directly to these valves.  Their offered product portfolio includes AN8 Male NPT 1/4" or 3/8", Female 1/4" NPT, Female 3/8" NPT, Female 14mm used for commercial automotive banjo's and Female 1/4"NPS supplied in their -6 banjo assembly. 

Their Male AN fittings enable plumbing straight into the aeroplane system with no extra fittings to buy. The lightweight alloy construction is anodized for protection. Viton O ring seals, used as  seals to the valve, are suitable for all current fuels. They can be used on experimental aircraft only. 

NEWTON CONSULTING manufactures and offers Aero extensive range of fue/oiI/water tank caps and special fittings for use on most of the worlds super cars and bikes and many light aircraft (Adam, CAP, Cirrus, Diamond, Lancair Columbia, Lancair kits, Nemesis, Vans, Velocity and others). Their centres are forged from 6063 or 6082 aluminum and then polished and anodised. The high precision and easy to operate mechanism is very secure and non vented. The flanges are diamond turned and again polished and anodised.  Cap assemblies come complete with cap, gasket, and flanges as ordered. Two keys come with the locking version. Fixing can be by rivet, bolt, weld or glass in as appropriate. Attach o-ring kits are available and can be ordered separately as needed.

Different Aero cap series include:

The Aero 200 series, the smallest and lightest of Aero filler caps. Available only in non-locking version and with either a 6 hole bolt on flange  (A26S) or a Glass-in flange (A20G).

The Aero 300 series, the first choice among designers and installers, offered as standard (non-locking) or locking versions with four different bolt configurations (0 hole, glass in, 6 hole & 9 hole, flange necks with lead free restrictor flaps and many special flange options to meet application requirements such as:

- F30G for installation into a composite skin.

- F30 GS, ideal for wooden aeroplanes avoiding recesses and doors.

- A30L CIRRUS with a low profile threaded flange designed for Cirrus to enable the cap to be fitted after the wing is painted, avoiding damage, dirt, masking, filling and other nuisances.

- FN362, a 6 hole bolt-on flange with hose neck

- A30L VANS, offered if a metal version is preferred to the lightweight version which now comes as standard with Vans aircraft kits.

- Z3 used in specific circumstances.

- Z30L VANS, a cap/flange offered as a retrofit assembly that will go into the older Vans/Usher cap/ flange.

The Aero 400 series, with lock (L) or without a lock (S) including A48S/L with aluminum flange for direct connection to tank and A4LT, plastic centre for use with Aero 400 flanges.

The Aero 500 series, with lock (L) or without a lock (S) and two standard fixing arrangements: A512S/L with flange for direct connection to tank and A50S/LG, glass in flange, moulded directly into tank vehicle skin.

The Aero 600 series, a super light version of the Aero 500, with a smaller footprint but retailing the same 3 inch (77.0mm) filling hole allowing the cap to be used for all fuels.

OMRON M2C Series cylindrical indicators have the basic design as the A3C pushbutton switches. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier and provide good illumination with even surface brightness. These indicators are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. UL (E41515) and CSA (LR45258) approved. Please consult the supplied documentation for ordering.

OMRON A3C series cylindrical pushbutton switches have the basic design as the M2C Series cylindrical indicators. They provide a high-intensity uniform surface lighting while they have a miniature size with excellent feeling of operation. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

OMRON A16 series pushbutton 16-dia. cylindrical body switches are detachable switches. The same contacts can be used for both standard loads and microloads. Their miniature design of 28.5 mm makes these switches the smallest class in the industry. Easy-to-wire terminal arrangement. Certified for EN 60947-5-1. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

For a number of years CLEVELAND WHEELS & BRAKES offered standard organic & heavy-duty asbestos brake linings for their wheels and brakes. In January 1988 these two types of brake linings were discontinued and a single, improved brake lining was introduced with improved performance and durability compared to older linings. Different versions are available to fit aircraft models based on their year of construction. Brake linings are sold as pad only or as kits together the required number of rivets. Most light aircraft take 2 linings per wheel. Extra rivets are also available. Please refer to the attached Application Guide for additional information.

Aluminum valve as used in production aircraft with Model A-110 master cylinders for dual brake installations. Complete with AN flare fittings.

Wheels, used in conjunction with tires, provide support for the tires and weight of the aircraft. Combined with brakes, they assist in directional and stopping control during aircraft ground maneuvers, taxi, takeoff, and landing. Brake assemblies and disc combinations are designed to properly and safely decelerate the aircraft under various conditions. Brake assemblies consist of one or more pistons depending upon the aircraft requirements.
CLEVELAND Aircraft Wheel & Brake Division, a PARKER HANNIFIN business unit, designs and manufactures wheels, brakes & assemblies for worldwide aircraft markets. CLEVELAND brand wheels and brakes are used on more than 80 percent of general aviation aircraft while their wheel assemblies are offered for military and business aviation applications. Their product lines include both TSO'd aircraft wheels, brakes, and wheel and brake assemblies for nose and main wheels to meet a variety of aircraft specifications and brake assembly interfaces. Offered through their worldwide distributor network for quick parts availability. Main and nose wheels are made from either aluminum castings, magnesium castings, or aluminum forgings. The main wheels are of the divided type, incorporating inner wheel half and outer wheel half, plus a disc, which are fastened together with tie bolts, washers, and nuts. They are offered in different models to work with different tire sizes. For example, their main wheel assemblies are designed for 6.00-6 tube tires while their #40-87 nose wheel assemblies are designed for 5.00-5 tube tires. Both are intended for use in general and business aviation, turboprop passenger, and helicopter applications. Sold in single pieces or in pairs whenever specified. Their key features include:
• Low maintenance for tubeless or tube-type
• Tapered roller bearings for dimensional stability and long life
• Molded grease seals for superior bearing bore sealing properties
• Split-rim design to allow ease of tire mounting
• High-strength through-bolts
• Sand castings and forgings
Nose wheel assemblies are made of magnesium or aluminum. Their key features include:
Load Capacity: Static load from 500 to 8600 lbs
Bearing Type: Tapered roller bearings
Size: 4 to 16 inch bead seat diameter
Torque Rating: Nut torque rating 90 to 150 in-lb dry; from 105 to 300 lube torque lb-inch
Weight: 3 to 18 lbs
For more information on the parts and quantities per assembly please refer to the respective illustrative parts list or contact us.
FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.
Appearing prices are for units in NEW Condition. For units in USED Condition (mostly SERVICEABLE/OVERHAULED with proper certification) please contact us for availability and quotation.
Note: NCNR products: non-cancellable/non-returnable once the order is placed. Often require backordering to the manufacturer with significant lead times.

CLEVELAND WHEELS & BRAKES, part of PARKER HANNIFIN CORPORATION, offers an extensive range of FAA-PMA approved master brake cylinder assemblies for use in different aircraft.

CLEVELAND master cylinders come in push or pull types in different bore, stroke and displacement variations in inches and 7/16-10 or 1/8-27 N.P.T. port sizes. Some models include parking valves and reservoirs. 

For additional information please consult the supplied documentation on technical characteristics and suitability of the master cylinders for specific aircraft.

Series 580 and 593 NPT swing check valves by PARKER Hydraulic Valve Division permit free flow in one direction, and shut off in the reverse direction with an extremely low internal leakage. Series 580 and 593 check valves will provide low pressure drop.

Body and cap are made from aluminum alloy, anodized. Internal parts are from aluminum alloy, anodized and stainless steel. They feature synthetic rubber molded seal and o-ring.

They come in different sizes: NPT 1/4", 3/8",1/2",3/4",1",1-1/4",1-1/2".

Product Features:

• Light weight aluminum

• NPT female fitting (NPTF)

• Zero leakage (less than 1 drop per minute)

• Full flow with low opening pressure

• Improved hinge controls

• Mounts in any position

• MS valves meet the following specifications: MS28882A or B, MS28884A or B

Filler opening caps are parts basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. They are either permanently attached or provided with a means of removal and replacement. 

Pressure refuel caps are used to lock, seal, and vent the pressure refuel port for an aircraft fuel tank. Pressure refueling allows for single point refueling on larger aircraft and can be used with all aircraft fuels. To fuel the aircraft, the caps are manually actuated by pressing down on the handle, which will vent and unlock the cap for removal by twisting. The cap remains attached to the aircraft by a lanyard. Once refueling is complete, the cap is inserted back onto the adapter and twisted until locked into place, which effectively reseals the pressure refuel port.

Pressure refuel caps are offered by different manufacturers such as Parker Aerospace, Eaton Coporation and others. They are designed in accordance with military specification MIL-C-8605B (for technical requirements) and MS29526-2(for envelope requirements).

Those from Parker Aerospace are 4.5 inches diameter, with an indexing feature and they fit into a 2.5-inch pressure refuel adapter per military specification MS24484. Their main features include an aluminum base and handle, a fluorosilicone O-ring seal, and antisparking brass chain lanyard (per industry standard RR-C-271) with a plastic tubing cover and corrosion resistant steel hooks.  Lanyards can also be fabricated with corrosion-resistant steel or flexible plastic and fuel resistant tubing. Optional features are also available such as key lock, ventilation, hinge, visual fluid level indicator, dust cover easy-lift handle and contoured adapter.

For additional information please consult the supplied documentation or contact us.

The PARKER HANNIFIN electronic plug amplifier VS 111 provides control for proportional pressure, directional, and throttle valves.

The plug amplifier may be mounted directly on the proportional solenoids and secured with a screw. The output of the amplifier supplies DC current for controlling one proportional solenoid.

This current is proportional to the command signal at the input of the amplifier. Through this, together with a proportional valve, an infinitely variable adjustment can be made to the pressure or flow.

Product Features:

• Solenoid control

• Simple installation, direct on valve

• Standard voltage or current signals for command signal inputs

• Capable of PLC control

• Solenoid current independent of temperature

• Solenoid connection 2+PE as per EN 175301-803

• Control connection 6+PE as per DIN 43651

IMPORTANT NOTE: Discontinued Item. Limited Availability from existing stocks in NEW SURPLUS  or USED Conditions.

For additional information please consult the supplied documentation or contact us.

Non-latching automatic self-sealing and Thread-Lok Quick Disconnect (QD) valved hose couplings are manufactured by the Stratoflex Products Division of Parker Hannifin Corporation.

Automatic couplings are recommended for use with today's advanced precision fluid systems for space flight, aircraft, ground and undersea applications. Stratoflex non-latching automatic self-sealing couplings are designed for use in diverse applications like electronic cooling systems, hydraulic accumulators/cylinders, brake systems, manifolds, vapor cycle and cryogenic systems. Automatic couplings are best utilized where space is limited, and hands off operation is required. Small envelope, high performance and unsurpassed reliability are key features of Stratoflex non-latching couplings. Available in different tube sizes, from sub-miniature to one inch in aluminum alloy, stainless steel, titanium and other exotic materials. They meet SAE Aerospace Standards AS4251,AS5072/1/2/3.

The Parker Stratoflex’s Thread-Lok Quick Disconnect (QD) valved couplings provide a proven solution for fluid conveyance systems  for aerospace and derivative markets when envelope and weight are important and robust performance is critical. Applications range from hydraulic, fuel, and cooling systems to pneumatic, air data systems, landing gears, wheel and brakes hydraulic fluid motors, military ground vehicles and space applications. Their respective Thread-Lok Ground Service Equipment (GSE) Quick Disconnect (QD) couplings are intended for use with fluid conveyance systems providing a robust connection for ground service equipment to the aircraft flight systems. The Thread-Lok QD is used in a wide range of pressure and temperature applications.

They integrate a highly reliable and robust positive locking mechanism to ensure the performance needed in difficult aircraft system environments such as the engine nacelle, landing gear and brake systems, and other QD demanding installations . The Thread-Lok QD couplings can be used in a wide range of pressure and temperature applications while they provide a simple one-hand operation to thread the QD halves together with a visual confirmation of proper and full coupling to improve both time and safety. 

The Thread-Lok QDs incorporate tang and slot design, with QDs engaging and locking in one position when the coupling halves are threaded together and fully connected, providing both visual and touch indication of the fully connected position. They use Parker’s efficient, self-sealing valve design that permits fluid flow with minimum pressure loss and turbulence.

Available in different tube sizes, from ¼ to one inch. Their stainless steel construction meets typical electrical bonding requirements.They meet or exceed MIL-C-25427 and AS1709 specifications.

For additional information please consult the Product Description section, the supplied documentation or contact us.

LORD manufactures a range of vibration and motion control products for General Aviation aircraft including elastomeric and non-elastomeric mounts, full structures, yokes and attachments. Their Dynafocal engine mounts are available for many aircraft, including the most produced general aviation fixed wing aircraft models, such as the Cessna 152, Cessna 172, Cessna 182, Piper PA-28 series, and more. For additional information please also refer to the attached Lord Catalog.

Switches for different functions, inteneded for use in Piper aircraft. Information on their applicability to different Piper aircraft models and serial numbers is included. For additional information and/or non listed switches please contact us.

Aircraft hydraulic pumps are used to move non-compressible fluid through an aircraft hydraulic system. This power is often used on small airplanes to operate wheel brakes, retractable landing gear, and some constant-speed propellers. On larger airplanes, hydraulics are used for flight control surfaces, wing flaps, spoilers, and other systems. Aircraft hydraulic pumps are normally engine driven, but sometimes to simplify the system manufacturers use an electric motor to drive the hydraulic system. These hydraulic power packs incorporate a reservoir, control valve and auxiliary valves into a single unit.

As the OEM for the PRESTOLITE Power Packs, AEROSPACE TURBINE ROTABLES Inc.applies an extensive overhaul and testing process to ensure a long and reliable operation of PRESTOLITE Hydraulic Power Packs offered as Overhaul/Exchange (*).  

(*)requires the return of the old unit and its exchange by an overhauled one. The supplier maintains the right to check the condition of the returned unit before the exchange. The price also applies to the hydraulic power packs shipped for overhaul of the same unit and return. 

When intended for use on certified aircraft applications, PRESTOLITE Overhaul/Exchange Hydraulic Power Packs come with Dual Release (FAA/EASA) Certification . It must specified at the time of ordering as additional charges may apply.

For additional information please consult the supplied documentation.

RAPCO produces quality FAA-PMA approved replacement organic and metallic brake linings for Cleveland and McCauley brake assemblies on most general aviation aircraft. Organic linings are actually made from a semi metallic mix. RAPCO combines brass, copper and Kevlar fibers with a high temperature binding compound to provide outstanding performance and long service life. Most RAPCO organic linings have a built in wear indicator, which reduces the risk of damage to the brake disc and helps to optimize lining life. RAPCO organic linings are available in boxes of 10 or in organic lining kits containing the proper number of linings and rivets necessary for replacement on Cleveland or McCauley brake assemblies. They are convenient to have on hand when the need for relining occurs. Metallic lining replacements for the Cleveland brake assemblies are made of sintered steel, a specially developed process that fuses metallic particles to a steel carrier plate. RAPCO metallic linings offer long life and excellent braking performance.

RAPCO Brake Rivets are FAA-PMA approved quality tubular rivets produced from plated steel for mounting aircraft brake linings. The RAPCO RA825 Rivet Tool Kit is recommended for proper installation.

Please refer to the attached Application Guide for additional information.

The RAPCO Dry Air Vacuum/Pressure pumps are are FAA approved quality and performance pumps intended for use as direct replacements of respective models of AIRBORNE and AERO ACCESSORIES (AA) in vacuum or pressure system applications. They are offered as NEW or OVERHAULED.

The NEW RAPCO Air Vacuum/Pressure pumps are FAA-PMA approved and have an inspection port for monitoring vane wear and determine when replacement is needed. An oil seal on the main shaft helps to prevent oil from entering and damaging the pump. Cooling fins reduce operating temperatures and help to extend pump life. They are internally coated with a special Mil-Spec. hard lube coating reducing friction and wear. The carbon rotor has also been improved by chamfering the leading edges of the vane slots reducing failure due to foreign object damage. With every pump, RAPCO includes a mounting gasket and vane measuring caliper. Fittings not included. There is no core charge when purchasing a new RAPCO dry air pump.  Manufacturers warranty on the 200 series is three years / 1300 hours. The warranty period on the 240 and the 400 series is 1 year / 500 hours, which ever comes first. There is no Core Charge on new pumps. 

The OVERHAULED RAPCO pumps are FAA approved and come with an FAA form 8130-3. Mounting gasket included. The warranty period for the 200 series is two years / 1000 hours. The warranty period for the 240 and the 400 series is one year / 400 hours, which ever comes first. Core charge applies. Please refer to the attached documentation for additional information.

The RAPCO Model RA215CC Dry Air Pump is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. This pump replaces the old model 211CC and can also be used in other engines listed below:

Textron Lycoming: O-235, O-290, O-320, O-360, O-435, O-540, IO-320, IO-360, IO-540, IO-720, TIO-360, TIO-540, GO-480, GSO-480

Continental: O-300, GO-300, IO-360, TSIO-360, TSIO-520, GTSIO-520

The RAPCO Model RA215CC-9  replaces the old model 211CC-9. It is the most common model in General Aviation applications using the O-200 engine. This pump can be used with Continental C90-16F, all 0-200 engines and most Lycoming O-320 engines installed on Cessna 150s, 172s, etc.

The RAPCO Model RA216CW replaces the old models 212CW, 216CW and RAPCO P/N RA212CW. This pump can be used with a wide range of aircraft engines including Textron Lycoming LIO-360, GO-435, TIO-541 and Continental E-185, E-225, IO-346, O-470, IO-470, TSIO-470 and IO-520.

Modern reciprocating-engine aircraft (especially large and high-performance ones) use electrically operated auxiliary fuel  boost and transfer pumps  to keep fuel moving toward the aircraft engine or move fuel between tanks to balance aircraft weight. Centrifugal boost pumps,  electric motor driven,  are the most common type and  are used to supply,back up the engine-driven fuel pump or transfer fuel between tanks if the aircraft is so designed. They are  most frequently  submerged in the fuel tank or located just outside of the bottom of the tank with the inlet of the pump extending into the tank. Cartridge/canister or in-tank mounted pumps supply fuel to the aircraft engine while reverse flow through the pump is prevented by check valves. The cartridge/canister design allows removal of the pump cartridge without draining the fuel tank. If the pump is mounted outside the tank, a pump removal valve is typically installed so the pump can be removed without draining the fuel tank.

The RAPCO FAA-PMA approved pumps are offered as direct replacements of the respective pumps by OEMs  such as PARKER AIRBORNE or DUKES (please refer to their separate product presentations). The letters " RA" in the beginning of the RAPCO part number are used to denote the correlation of RAPCO part number to the OEM part number. They incorporate modern design, materials, and manufacturing processes to provide high quality and performance fuel pumps at competitive prices. 

These pumps can be furnished  as NEW or OVERHAUL EXCHANGE, namely new or overhauled pumps in exchange of existing customer owned units (cores). In all exchange cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable serviceable condition. In the case of overhauled pumps, these are overhauled in accordance with FAA-approved process specification and come with a FAA Form 8130-3. All  RAPCO fuel pumps are thoroughly tested for guaranteed pump performance, with a worldwide distribution and a full warranty (same as OEM). For additional information please consult the supplied documentation (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.   

The RBC® BEARINGS offers a full line of airframe control ball bearings to the aerospace industry  in both “Standard” and “Precision” series. The prefix “M” in a bearing number indicates that it is of a precision series. Although designed and manufactured under demanding quality control requirements for airborne systems, these bearings have been successfully used in many industrial applications, where oscillatory movement, high loads, or corrosive environments are prevalent.

RBC® BEARINGS airframe control ball bearings conform to SAE-AS7949 (formerly MIL-B-7949) and many major OEM specifications. These bearings are of lightweight design, corrosion-resistant, grease-lubricated, and typically sealed. Airframe control bearing rings and balls are made of hardened bearing alloy, AISI 52100, with all exposed surfaces, except bearing bore, caps and seals, plated for corrosion protection. For improved corrosion protection, RBC® BEARINGS  supplies bearings made of hardened stainless steel alloy, AISI 440C. This alloy may be passivated or plated with cadmium or zinc nickel for enhanced corrosion protection.

The RBC® BEARINGS Airframe Control Ball Bearings are offered in different series. The KP/KP-A and KSP/KSP-A series, presented separately, are briefly discussed below.

KP (Heavy Duty) and KP-A (Medium Duty) SAE-AS7949 Series radial ball bearings  manufactured with Plyoseals. KP heavy duty single row sealed bearings comply with MS27640 specifications while KP-A medium duty single row ball deep groove sealed bearings with MS27641 specifications. Both KP and KP-A radial ball bearings are prelubricated for life and feature PTFE seals and CRES sealcaps, cadmium plated exposed surfaces except bore, caps, and seals. Both are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. Load limit ratings: Radial 1230-lbs, thrust 300-lbs.

KSP/KSP-A Series SAE-AS7949 Series single/double row, self-aligning, light and heavy duty ball bearings with bonded PTFE seals and cadmium plated exposed surfaces except bore, caps, and seals. Like those of KP/KP-A Series, both KSP and KSP-A bearings are prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications.

For additional information please refer to the supplied documentation in the respective product presentations.

RBC NICE 5000 Series bearings are similar in construction to those of 400 Series except that they have a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. Designed for moderate loads and speeds (not exceeding 1200 rpm) where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. They feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pre-greased as a standard. 

NICE 5000 Series Specifications (See chart )

RBC Aerospace Bearings offers a full line of Mil Spec standard lined journal bearings, unlined bushings, and many specialty and custom designed products to support the aerospace industry.   Journals are designed in a straight (plain) configuration with a flange to accommodate a combination of radial and axial loads with corrosion resistant materials and coatings. Journals are also offered in high temperature and water resistant series. Typical journal materials are CRES 17-4PH and aluminum.  Bearings may also be cadmium or zinc nickel plated as required while CRES 440C and Inconel® 718 are available upon request. Journal bore and flanged journal face surfaces may also be provided with various liner systems to satisfy specific application requirements. Machinable liners  are qualified to AS81934 (formerly MIL-B-81934). For additional information please refer to the attached documentation.

AS8976 narrow spherical bearings from RBC Aerospace Bearings are available in grooved or chamfered versions from steel (MS21154S grooved & MS21155S chamfered steel series) or bronze (MS21154B grooved & MS21155B chamfered bronze series). For additional information please refer to the attached documentation.

AS8976 Bearing Product Features:

• Qualified to AS8976 (formerly MIL-B-8976)

• Narrow series, metal-to-metal

• Material MS21154S & MS21155S steel series 03-503 and 03-505

Outer ring: Alloy steel, AMS-S-5000, AMS-S-6758 or AMS-S-6050

Inner ring: CRES 440C, HRC 55 min. AMS 5630

• Material MS21154B & MS21155B bronze series 03-523 and 03-525

Outer ring: Aluminum bronze

Inner ring: CRES 440C, HRC 55 min. AMS 5630

The RBC® BEARINGS offers a full line of airframe control ball bearings to the aerospace industry  in both “Standard” and “Precision” series. The prefix “M” in a bearing number indicates that it is of a precision series. Although designed and manufactured under demanding quality control requirements for airborne systems, these bearings have been successfully used in many industrial applications, where oscillatory movement, high loads, or corrosive environments are prevalent.

RBC® BEARINGS airframe control ball bearings conform to SAE-AS7949 (formerly MIL-B-7949) and many major OEM specifications. These bearings are of lightweight design, corrosion-resistant, grease-lubricated, and typically sealed. Airframe control bearing rings and balls are made of hardened bearing alloy, AISI 52100, with all exposed surfaces, except bearing bore, caps and seals, plated for corrosion protection. For improved corrosion protection, RBC® BEARINGS  supplies bearings made of hardened stainless steel alloy, AISI 440C. This alloy may be passivated or plated with cadmium or zinc nickel for enhanced corrosion protection.

The RBC® BEARINGS Airframe Control Ball Bearings are offered in different series. The KP/KP-A and KSP/KSP-A series, presented separately, are briefly discussed below.

KP (Heavy Duty) and KP-A (Medium Duty) SAE-AS7949 Series radial ball bearings  manufactured with Plyoseals. KP heavy duty single row sealed bearings comply with MS27640 specifications while KP-A medium duty single row ball deep groove sealed bearings with MS27641 specifications. Both KP and KP-A radial ball bearings are prelubricated for life and feature PTFE seals and CRES sealcaps, cadmium plated exposed surfaces except bore, caps, and seals. Both are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. Load limit ratings: Radial 1230-lbs, thrust 300-lbs.

KSP/KSP-A Series SAE-AS7949 Series single/double row, self-aligning, light and heavy duty ball bearings with bonded PTFE seals and cadmium plated exposed surfaces except bore, caps, and seals. Like those of KP/KP-A Series, both KSP and KSP-A bearings are prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications.

For additional information please refer to the supplied documentation in the respective product presentations.

RBC SAE-AS7949 MS27646 B500DD Series Airframe Control Extra Light Torque Tube Ball Bearings are single row, self-aligning, extra light duty ball bearings with PTFE seals and cadmium plated exposed surfaces except bore, caps, and seals. This series is dimensionally interchangeable with the unsealed B500 series. MS27646 B500DD Series bearings are prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. Please refer to the attached reference chart.