UTC AEROSPACE GOODRICH® Care & Maintenance product portfolio includes a range of different products. 

GOODRICH® ShineMaster™ Prep is a deep-cleaning surface treatment that prepares de-icers for the ShineMaster™ luster. It cleans the de-icer and removes residual coatings as the first step in the de-icer care process. Removes dirt, grease, oil, silicone products and other contamination as well as residual ShineMaster™ cosmetic polish before reapplication. The only cosmetic treatment system approved for use on Goodrich de-icers. As a secod step GOODRICH® AgeMaster #1 rubber preservative can be used  that replenishes the emollients destroyed by ozone and protects against weather. For use on neoprene de-icers only. GOODRICH® ShineMaster™ cosmetic coating can then be applied as the third step in your de-icer care process. ShineMaster™ offers de-icers a lustrous shine and cosmetically enhances de-icers by coating the exterior surface. This cosmetic treatment is easy to apply, dries quickly and provides a long-lasting shine.

For additional information please consult the supplied documentation.

SOUTHWESTERN PETROLEUM LUBRICANTS LLC. (SWEPCO) is a manufacturer of technologically advanced lubricants that protect equipment assets in even the most severe operating conditions while helping companies around the world reduce overall operating costs through increased uptime and productivity and lowering maintenance and lubrication expenses. SWEPCO brand lubricants and specialty compounds are used in a wide range of applications serving the needs of Construction, Mining, Manufacturing, Marine &Transportation industries. For additional information on SWEPCO products please consult the Product Description section and the supplied documentation.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

Eaton's Aeroquip® brand name represents quality and innovation in the aerospace industry and a wide range of options are available to meet the needs of aircraft OEM and maintenance engineers. Eaton’s Aeroquip hose, fittings, couplings and connectors are available for various pressures and applications. Lightweight and flexible rubber hoses, fittings & assemblies for aerospace applications qualified to industry standards are included within the company's product portfolio. The 306 Series is intended for low pressure while the 302A/303 Series (see separate product presentation) for medium pressure applications.

The 302A/303 medium pressure hose includes a seamless synthetic rubber compound inner tube with a single cotton braid reinforcement and a synthetic rubber outer cover. Operating temperatures: -65°F to +160°F (-53ºC to +71ºC). Used in air or vacuum instrument systems, automatic pilots and lines to pressure gauges used with these systems as specified in MS33620. Hose conforms to MIL-DTL-5593. Used with Aeroquip 491 hose fittings. Available in different tubing sizes and internal diameters in inches. Sold by the foot. Fittings are offfered in pieces and conform to MILDTL-38726 and MS27404 (superceding AN773). Hose assemblies conform to AN6270. For additional information please refer to the attached documentation.

SHELL® extensive range of automotive lubricants includes engine oils for a variety of applications in cars, motorcycles as well as trucks and light or heavy duty vechicles.

SHELL® HELIX Fully Synthetic Motor Oils are manufactured from 100% synthetic base stock and high quality additives to achieve higher performance levels than both synthetic technology and mineral oils. To these high-quality synthetic base oils SHELL® proprietary Active Cleansing Technology is added to create a motor oil that helps provide superior cleansing and protection for today’s engines. SHELL® HELIX oil types include Semi Synthetic Motor Oils, Mineral Motor Oils, High Mileage Oils, Diesel Motor Oils and  ECT Oils.

SHELL® ADVANCE portfolio of motorcycle engine oils consists of  4T, 2T motorcycle and scooter oils. Their key benefits include zero loss in horsepower, fuel economy and longer drain intervals.

SHELL® RIMULA Light Duty range of oils is designed for light duty trucks. With Dynamic Protection and Dynamic Protection Plus Technology (included in Grade LD5), they protect against engine wear and tear caused by each stop and start in daily operations. The high performance additive package contains anti-oxidation components for a longer oil life in vehicles operating under high idle engine conditions. Dispersants in the additive package help break down soot and deposit build-up regardless of the type of load carried.

SHELL® RIMULA Heavy Duty engine oils offer outstanding wear protection with reduced viscosity for improved fuel economy, acid and deposit protection and wear control.

Further information can be obtained through the supplied documentation.

Brass nuts for mounting of aircraft instruments from the front of the panel.

The KLIXON® PS series 2 to 35 Amp precision thermal circuit breakers by SENSATA TECHNOLOGIES Inc. (formerly Texas Instruments Sensors & Controls) are designed to interrupt short circuits or overloads and combines trip-free protection with fast response time. They feature a bi-metallic snap-acting disc as the sensing element and they are widely used in production and military aircraft where precise ultimate trip characteristics are required. Models PSM and PSM-N are available in the following ampere ratings 2, 3, 5, 10, 15, 20, 25, 35. When ordering specify if neck-mounting style is wanted by placing “N” after ampere rating. Example: PSM-10N

The KLIXON® PDL series thermal breakers are designed to meet the harshest environmental requirements. They are weatherproof for protection against moisture, dust, grease, fuel vapors, and other harsh environments. For weatherproof circuit breakers in ratings from 50 to 150 amperes, order Model PDLM. 

AVIATIONEU NEW ERA air relief valves can be used in different industrial applications. They are made from different materials,  EN 1AL (free cutting steel), 1SMnPb30+C or SAE 12L13  and zinc plated. Available in the following sizes:

Metric: M10 x 1 ARV

British Standard Pipe (BSP): 1/8" BSP ARV

U.S. National Pipe Thread (NPT): 1/8" NPT ARV, 1/4" NPT ARV

Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

The  PARKER HANNIFIN (Hose Products Divisionn) offers the following series of Medium & High Pressure hydraulic hoses compatible with No-Skive fittings.

- BCH Series braided and SX Series spiral hoses meeting international technical standards. More recently developed they are intended for demanding small and medium OEMs and general distribution,

- ELITE No-Skive braided and Parkrimp® No-Skive spiral hoses, exceeding the standards and highly appreciated in the very demanding MRO and OEM markets.

- GLOBALCORE™ State-of-the-art  hose product range, exceeding the newest ISO 18752 and providing technical and economical excellence to the most demanding customers. 

Good, Better, Best classification system is used for easier hose and fitting understanding and selection with superior performance of Best hoses versus their Better and Good counterparts including: 

- Bend radius up to 50% smaller

- Flexibility (bending force) up to 30% higher

- Weight up to 20% lower

- Dimensions up to 25% smaller area

- Impulse resistance and service life up to four times higher

- Working temperature up to 25% higher

Agriculture is one of the typical markets and applications where Good hoses and fittings are the preferred product selection.

For additional information please refer to the supplied documentation or contact us.

LED lighting is the ideal technology for aviation applications. Whelen LED lights are time and field-tested for reliability and long-life performance under the tough conditions required by Fire, Emergency, DOT and Law Enforcement professionals around the world.

PARMETHEUS PLUS PAR36 LED lights by WHELEN AEROSPACE TECHNOLOGIES (WAT) are FAA-PMA Approved LED lights with a convenient “Drop In” design for ease of installation, intended for use as direct replacements for outdated PAR36 Halogen and HID lamps. Power wiring attaches to brass screw terminals. Weight is virtually identical to previous PAR36 lamps. Assembly design includes clocking notch. They are lightweight, low-current and moisture resistant and provide stable light output for thousands of operating hours. The WAT PARMETHEUS PLUS  LED lights have a 40% brighter output than the original PARMETHEUS Series assemblies.

Product Features:

Offered in Landing and Taxi versions

Lightweight

STC-PMA

Direct replacement for outdated PAR36 Halogen and HID lamps

First commercially available PAR36 LED for Aviation applications

10.000 hour operating life

Polycarbonate, replaceable, hard-coated outer lens

Metal, heat dissipating coated housing

Whelen TIR™ (Total Internal Reflector) technology rivals strobe in intensity and effectiveness

Designed and manufactured in the USA.

Five year warranty

Connectors are used on electrical wiring harnesses and are essentially enclosures (i.e., shells) which house contacts with wires. The electrical connection into the system at the contact termination is either a soldered or crimped connection (the latter removable from the connector with the use of a special tool). The shell and insert may be moisture resistant or a hermetic seal. The inserts in each connector must be oriented for correct mating, and the shell or insert usually contains a keying feature to prevent miss-mating that could damage the connector or result in an electrical problem. 

Connectors can be of a Plug (“male”) or Receptacle (“female”) type. Receptables are also termed as sockets or jacks. Plugs have prolonged connecting pins which fit into the mating sockets. Receptables have mounting features such as a flange with holes. Connectors used in aircraft are mostly those complying with Military Standards (MIL-STD) and Military Specifications (MIL-SPEC).

Different connectors, structured in series, are offered as part of our own branded (AVIATIONEU NEW ERA) product lines to provide cost-effective solutions for a variety of applications. Sourced by quality suppliers, they are available in plug or receptable types. 

AVIATIONEU NEW ERA MIL Standard MS5015 series connectors meet MIL-C-5015 specification. They ensure high electrical capability and durability at an acceptable cost and can be used for a range of applications including military ground support equipment, aircraft installations and others. Available in different case sizes (10SL,14S,16S,18,20,22,24,28 and 32) and  sold by the piece (pc.).

Product Specifications:

Shock: 490 m/s2

Relative humility: 95+-4% at 40℃ 

Insulation resistance: 5.000 Mega ohms minimum (at 25°C) 

Frequency Range: 10-2000Hz/147m/s2

Voltage Rating: 500VAC 700VDC 

Mating Type: threaded coupling

Termination : Solder

Durability (mating) ≧ 500 cycles 

Temprature Range:  -55°C ~ +125°C

The Series 16 from MECHANICAL PRODUCTS (MP) is a proven reliable, single-pole thermal circuit breaker with a robust design. This series is suitable for diverse applications such as medical equipment, uninterruptible power systems (UPS), portable generators, welders, industrial cleaning equipment, and transportation. These heavy duty circuit breakers are ideal for use with aircraft alternators and other applications using high amperage.

AIRGO 3001 is a trademark of ZF Friedrichshafen AG. It is a high-performance gearbox oil designed for use in automatic transmissions with an outstanding oxidation and friction stability.

Terminal boards (aka terminal blocks or terminal board assembies) are connectors that terminate a single wire and connect it to a circuit or other system. In their simplest form, they consist of several individual terminals arranged in a long strip. Terminal blocks come in a range of shapes, sizes and ratings and they are used in a range of applications including aircraft, cars, vessels and others. Those made as per Military Standard MS27212 (superceded by SAE-AS27212) are stud type blocks offered by different manufacturers (such as R&B ELECTRONICS®, MARATHON® Special Products (formerly Kulka), or MARCO Manufacturing) and used on aircraft applications. Studs are made from different types of Corrosion-Resistant Stainless Steel (CRES) with our without passivation. Insulation material is Diallyisophthalate plastic meeting US Federal Standard GDI-30F & Mil-M-14. Max operating temperature can reach 155 Deg, C (311 Deg. F). Their stud thread size and number of studs are indicated in their part number.

MS27212 / AS27212 Product Eatures:

Molded-in-stud electric terminal boards

Excellent corrosion resistance

Excellent dielectric strength

Excellent moisture resistance

Resistance to thermal shock

Total Continuous Rating: (155 Deg. C / 311 Deg. F).

MS27212 -X-(N) Dash No. where X is Stud Thread Size & N is the Number of Studs / Board (Assy.

Stud Thread Sizes (in.) & Types (X): MS27212-1 (6-32 UNC-2A) | MS27212-2 (10-32 UNF-2A) | MS27212-3 (1/4-28 UNF-2A) | MS27212-4 (5/16-24 UNF-2A) | MS27212-5 (3/8-24 UNF-2A) | MS27212-6 (8/32 UNC-2A)

For additional information please refer to the supplied documetation.

SAE-AS1034/MS24401/AN821 90° series elbow 90°, flared tube fittings are available as part of our own labelled (AVIATIONEU NEW ERA) product lines in different materials, tube outer diameters and thread sizes in inches.  AN821 and MS24401 series elbow fittings are superseded by the respective elbows of SAE International, standard AS1034 series. These fittings are made from different materials including Carbon Steel, Aluminum Alloy, Corrosion Resistant Steel (CRES), and Titanium Alloy. The 2 digits after the series code indicate the tubing outer diameter (O.D.)  in inches. The following Material Code Letters in the part numbers indicate the composition of the fitting. Finish code “V” in the PN indicates high purity Aluminum coating for “W” or “D” fittings. 

No code letter in part number for Carbon Steel

“D” for Aluminum Alloy (except 7075-T73)

“J” for CRES, type 304

“K” for CRES, type 316

“R” for CRES, type 321

“S” for CRES, type 347

“T” for Titanium Alloy 6AL-4V

“W” for Aluminum Alloy 7075-T73

For example, a 90° elbow fitting with a flared tube 3/8 in. size connection corresponds to PN AS1034D0606 when made from Aluminum Alloy or AS1034W0606 when made from 7075-T73 Aluminum Alloy replacing respective AN821-6D 90° elbow fitting from Anodized Aluminum Alloy with a 37 deg flared tube 3/8 in. connection, and a  UNJF / Class 3A thread of 9/16-18 in. size. AN821 fittings of tube outer diameters  3/4 in. (size 12) and above come with UNJ / Class 3A threads.

Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

Note: In SAE AS standards for new designs, aluminum fittings with material code letter D in their Part or Identifying Number (PIN) are replaced by those with material code letter W for Aluminum Alloy 7075-T73 providing a higher tensile strength. In addition CRES fittings with material code letter S can be used for replacement parts. For new designs use of CRES fittings with material code letter R is recommended for applications requiring higher temperature. 

ERNEST H HILL LIMITED (HILL PUMPS) is a manufacturer of fluid transfer equipment for automotive and industrial lubrication, petrochemical, industrial, agricultural and aerospace fluid transfer applications.

HILL supplies a comprehensive range of pumps, lubrication, garage & workshop equipment to all types of industries, from aviation & agricultural pumps to industrial and automotive servicing equipment.

HILL pumps are designed for use with chemicals, oils, AdBlue/UREA, water, diesel, antifreeze, grease, gear oil. Their food grade approved pumps are intended for use within the food and drink sector. Apart from pumps HILL supplies  an extensive range of garage equipment such as hose reels and waste oil drainers. 

For additional information on HILL PUMPS products please consult the supplied documentation or contact us.

RAPCO manufactures FAA-PMA approved pneumatic filter replacements for airborne assemblies. RAPCO filters are constructed to the highest industry standards. They utilize a 0.3 micron filtration media which provides superior filtration without undue air flow restriction. They help proper filtration of destructive contamination within an aircraft environment (such as system dirt and dust from the cabin and cigarette smoke) which often lead to the need for replacement of expensive gyro instruments & other components.  When changed on a scheduled basis they can reduce operating costs. 

RAPCO FAA-PMA approved RA-B3-5-1 Garter Filter Element is a filter replacement part for use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Product Specifications:

Garter Filter Element

Polyurethane foam, 1” long x 1-3/4” diam. 

For use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Recommended Replacement: 100 hours/ 1 year

RAPCO FAA-PMA approved D-9-18-1 Central Air Filter Element replacement is intended for use with Airborne 1J7-1 filter assembles, for vacuum systems. 

Product Specifications:

Central Air Filter Element.

Pleated filter, screen with bonded rubber end seals. 

3-1/4” long x 2-7/8 diam. 

For use with Airborne 1J7-1 filter assembles, for vacuum systems

Recommended Replacement: 500 hours/ 1 year

Note: 

The products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case. Additional charges may apply.

SOCOMORE® produces waterbased and gel type aerospace cleaners which can be used for cleaning of aircraft exteriors and parts.  MAGCHEM® is a sister company of SOCOMORE® producing solutions for the preparation protection of metal surfaces or composite materials in the construction and maintenance of the transport industries including solutions for aerospace cleaning, surface preparation and metalworking processes. MAGCHEM® product range includes all-purpose cleaners, liquid detergents, paint removers, degreasing solvents, deoxidizers, and others.

For additional information and specifications please refer to the supplied documentation.

A. RAYMOND TINNERMAN® & PALNUT® (aka PAL) of TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. are leading brands in specialty clip-type fasteners including the world's largest selection of spring steel, stainless steel, and plastic engineered fasteners.Their fasteners replace traditional fastening methods with innovative solutions combining aesthetics and functionality. They are quick and easy to install, and do not require mounting tools. 

TINNERMAN®  & PALNUT® equivalent (style) fasteners, corresponding to respective OEM popular part numbers, and other specialty fastening products are sourced from different quality manufacturers and offered as part of our own labelled (AVIATIONEU NEW ERA) product lines (*). Depending on the selected products, they can be supplied in inch or metric systems in different design variations (impression types), materials, finishes and screw sizes to comply with panel thicknesses. Sold in pieces mostly in packs of specified number of fasteners according to the selected part number. The number of pieces per pack is indicated after the letters "PK" in the product SKU. Parts are all in NEW Condition unless otherwise specified and are accompanied by our own and Manufacturer's Certificate of Conformance.

For additional information please refer to the supplied documentation or contact us.

(*) TINNERMAN® & & PALNUT® are registered trademarks of A. RAYMOND & CIE and TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. respectively. AVIATIONEU GROUP companies DO NOT manufacture these fasteners. They are sourced from their respective manufacturers and/or authorized distributors.

ROTAX® aircraft engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Ignition systems and parts are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from BRP-ROTAX® but also from other manufacturers.  Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.