5 inch wheel with 4.3 inch width with an additional 1.39 inch caliper spacing. 

MATCO mfg manufactures an extensive range of master cylinders for brake applications. MATCO mfg's MCMC-4 master cylinders use a REMOTE reservoir and are offered in different models. They can be mounted vertically or horizontally (Universal) to the exterior reservoir and can be used in individual or dual brake applications. They use a  0.625 inch diameter piston and Buna-n o-rings. Mil-H-5606 aircraft hydraulic fluid or compatible fluids are reccomended. DOT5 may be used but not DOT5.1 which contains glycol. DOT3 and DOT4 may not be used and will cause immediate damage to the seals. Tested to a maximum of 1200 psi. Normal operation: 400-600 psi. The MCMC-4 has an adjustable clevis.

MCMC-4 Product Features & Specifications:

Umiversal - Vertical or horizontal mounting with exterior reservoir.

Buna-n orings 

Measures 8.05 +-0.25 inches from end to end.

Measures 7.5 +-0.25 inches from mounting hole to mounting hole.

A 0.625 inch diameter piston is used.

Stroke is approximately 1.388 inches.

Displacement is 0.43 cubic inches.

The ports on all MATCO mfg master cylinders are 1/8 inch NPT (except the MC-4E).

MCMC4A is 0.50 inch shorter that the MCMC-4.

MATCO mfg's PVPV series parking brake valves have been designed for installation in a wide variety of homebuilt aircraft applications due to their light weight and easy in-line installation . In-line installation can be used in conjunction with either a single or dual parking brake system set- up with the respective use of valves  PVPV-S or PVPV-D available in single or double sided configuration.

Pair of wheels with matching hydraulic disc brakes. Available with standard disk or chrome disk for amphibious operations.

The company SPECIALITY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

SPECIALITY TIRES products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case, additional cost may apply.

Aircraft wheels and braking systems serve a vital function during takeoff, landing and taxiing. Along with landing gear, aircraft wheels and brakes are critical to ensure safe and reliable aircraft ground operations under extreme forces, stress, as well as wear and tear from general operation and the environment. 

Aircraft brakes are arranged in multiple disk pairs, which are commonly referred to as brake Heat Sink. As aircraft brakes convert the kinetic energy of the moving airplane to heat energy, they are also referred to as Heat Packs made of steel or carbon fibres. Conventional metal (steel) brakes are gradually replaced by carbon brakes (particularly on larger, long-haul commercial airplanes) due to their higher efficiency in braking applications, lower weight and resulting less fuel consumption and lower CO2 emission by the engines. 

Commercial aircraft wheels and braking systems are produced by by leading manufacturers such as Honeywell Aerospace, Collins Aerospace/Goodrich Wheels & Brakes, Parker Meggitt Aircraft Braking Systems and Safran Landing Systems (formerly Messier-Bugatti-Dowty) and offered as OEM products/parts for an extensive list of commercial aircraft platforms.  For more information on different OEM products please refer to the Product Description section, the supplied documentation or contact us.

Carbon and steel heat packs are also offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  PMA approved (*) parts by the Civil Aviation Administration of China (CAAC) for use on an extensive list of Western and Eastern commercial (civil ) aircraft platforms including Boeing, Airbus, McDonnell Douglas, Ilyushin and others. Sourced from quality suppliers they are available in an extensive product range, consist cost effective alternatives equalling or exceeding standards of the respective OEM products and feature high quality, safety, improved design, significant cost savings and fast deliveries. For more information on AVIATIONEU NEW ERA PMA brake heat packs please consult our separate product presentation or contact us.

The brake assemblies and disc combinations by CLEVELAND WHEELS & BRAKES are designed and qualification tested to properly and safely decelerate the aircraft under various conditions. The brake assemblies consists of one or more pistons depending upon the aircraft requirements. For more information on the parts and quantities per assembly please refer to the product presentations and the attached documentation. 

NCNR product: non-cancellable/non-returnable once the order is placed. Often requires  backordering to the manufacturer. Delivery time cannot be specified.

FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.

BERINGER AERO manufactures a range of wheels, brakes and related parts for use on certfied and non-certified aircraft (LSAs, experimentals and gliders). Their product portfolio includes among others wheels,Certified (STC) and Non Certified wheel/brake assemblies, wheel and brake parts and related tools.

Wheel and brake parts are included in this presentation while wheels and wheel/brake assemblies and tire options are separately presented.

For more information please refer to the Product Description section and the supplied documentation or contact us.

A grease seal, often called an oil or dirt seal, is a type of seal utilized to retain grease in a case or housing. Grease seals close spaces between stationary and moving components in mechanical equipment, helping prevent lubricant escape. Preventing harmful containments from entering machinery is another critical function of a grease seal. Oil and grease seals are available in numerous lip materials. Popular materials include felt, leather, urethane, nitrile, polyacrylate, ethylene-acrylic or polyacrylic, silicone, fluoro-elastomer, tetrafluoro-ethylene propylene and PTFE. Cleveland Grease Seals are intended for use in Cleveland Wheel Assemblies. 

BERINGER AERO manufactures a range of wheels, brakes and related parts for use on certfied and non-certified aircraft (LSAs, experimentals and gliders). Their product portfolio includes among others wheels,Certified (STC) and Non Certified wheel/brake assemblies, wheel and brake parts and related tools.

Wheels and wheel/brake assemblies and tire options are included in this presentation while other offered options and wheel and brake parts and related tools are separately presented.

BERINGER wheels can be supplied with mounted tires and inner tire tubes, aluminum or steel axles and hardware in different options and wheel caps which are sold separately. Please refer to the separate product presentation on BERINGER AERO wheel and brake parts.

BERINGER AERO RA Series nose/tail wheels  are offered in  4" 5" 6" 12.5"diameters. Non- certified models are intended for use on Ultralights and LSAs. Features of RA Series wheels include:

• Wheel in 2 halves 

• Made of high strength aluminum, machined from billet 

• Sulfuric anodizing 

• Tubeless for safety (O-ring and rigid valve) 

• Waterproof bearings → no repack (stainless steel available in option) 

• Steel or aluminum axles

• Tubeless tires (see Tire – Wheel Correspondence Table) 

• Stainless steel bearings optional

• Wheel caps optional

• Available certification (STC/STC TSO) for models RA-001 | RA-005 | RA-013 | RA-014 | RA-015

BERINGER AERO 5" diameter standard wheel/brake assemblies are offered in 4.00" (PN RF-020) and 5.00" widths  (PN RF-019). They feature:

• Single brake caliper with Aerotec® patent : stainless steel piston - sintered pads,

• Stainless steel floating disc,

• Different tire options as per the supplied Tire-Wheel Correspondence Table,

• Aluminum or steel axle options. Please refer to the separate product presentation on BERINGER AERO on wheel and brake parts for wheel axles and hardware,

• Matching wheel caps. Anodized caps from billet aluminum machined on CNC and offered as options for use in BERINGER AERO 5" - 6" wheels.

For more information please refer to the supplied documentation or contact us.

GOODYEAR® AVIATION tires are widely used in all aviation tire market segments, from piston engine light aircraft to turboprops, business jets, regional and commercial airlines.They come in different series meeting respective economy, performance or special operations' application requirements. Offered in NEW or USED (RETREAD) (*) Condition.

GOODYEAR® AVIATION FLIGHT SPECIAL® ΙΙ Series aircraft  tires are popular replacement tires for light aircraft due to their unsurpassed combination of value and performance. Designed for long tread life, they are built to last. They feature quality construction, wide rib thread design and large footprint, tough-wearing thread rubber and triple-tempered nylon casing cord resulting in enhanced traction, uniform wear and extended service life.

GOODYEAR® AVIATION FLIGHT CUSTOM® ΙΙI Series "Top of the Line" aircraft  tires set new records for long wear, high-strength and dependability. They feature dual polymer tread compound, enlarged tread contact area, extra-wide aquachannel grooves, sculptured sidewalls and Kevlar® belts for added tread stability. Benefis from their use include up to 20% more landings, superior wet traction treadwear and enhanced traction and treadwear assisting dimensional stability. 

GOODYEAR® AVIATION FLIGHT EAGLE® Series are industry’s preferred business jet tires. FLIGHT EAGLE® LT tires are designed for very light and light jet applications featuring tough, cool-running tread compound, robust, 6-ply bead area, 2-groove tread design, sidewall with antioxidants to help fight ozone and special wear-resistant tread compounds.

GOODYEAR® AVIATION FLIGHT LEADER® Series tires are the bias-ply choice for commercial aircraft. They feature a bias-ply construction, a specialized cord body shape and a specially compounded tread design and large contact area. They offer high speed performance and greater load capacity but also reduced stress as the tire cycles from tension to compression. They can be used in a wide range of operating conditions and aircraft applications.

For additional information please refer to the supplied documentation or contact us.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

MICHELIN® AIR® X® Aviation Radial Tires are currently mounted on a wide range of commercial, military and corporate aircraft. Given the numerous advantages they offer over conventional bias-ply tires, these tires have elevated the basic performance expectations for aircraft tires, the same way MICHELIN® radials raised the standards for automobile tires. Offered in NEW or USED (RETREAD) (*) Condition. Compared to bias tires, MICHELIN® AIR® X® radials offer:

Measurable Fuel Savings

More Landings Per Tread

Improved Cut Resistance

Key features of MICHELIN® AIR® X® radials include:

Light Weight Radial Design. They typically weigh 20–30% less than comparable bias tires, and they operate at cooler temperatures. This leads to measurable fuel savings, more landings per tread, longer wear characteristics and a more stable contact patch than bias tires, as well as shorter turnaround times and reduced carcass fatigue.

Extra Strong Carcass. Michelin’s carcass design helps restrict tire growth and the stretching of rubber resulting in better cut resistance than bias tires.

Optimized Tread. Durable cut-resistant tread includes deep skid depth and specially-designed circumferential grooves. This contributes to an extended tire life, less heat build up and lower maintenance costs due to fewer tire changes.

Customized Rubber Compounds. Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides maximum amount of exterior wear and crack resistance for a long tire life.

Flexible Casing. The casings of MICHELIN® AIR® X® radials is more flexible than casings used in bias tires. This results in noticeably smooth operating characteristics during taxiing, landing and takeoffs.

Please refer to the supplied documentation and the Reference & Application Chart for additional information.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) wheels & brakes and tires made for flying and landing off-field in the most rugged backcountry conditions. ABI tires absorb the energy of rough landings, taking the brunt of the impact off the pilots, wheels, gear, and airframe. Unlike your standard aircraft tires, Bushwheels are tubeless. This distinctive design eliminates the problem of tire slippage and stem shearing and makes it possible to run these tires at very low PSI. Different models are offered to suit needs of aircraft operating conditions. ABI tires are FAA TSO C62d approved. Models are available in the following versions and fit standard 6" wheels unless otherwise mentioned:

Standard thread: 3/16"

Heavy thread: 1/4". Heavy tread 26" ABI tires are constructed with a thicker tread layer. Suitable for pilots operating their aircraft on pavement between backcountry flights.

The 26" ABI tires are designed and handcrafted for use on lighter aircraft such as Cessna 182 & Cessna 206. They're also the ideal "entry level" bush tires for pilots upgrading from standard tube type aviation tires for the first time.

A step up in terms of size, 29" ABI tires have a slighter profile and create less drag than larger Bushwheels. This places these bush tires in size/weight sweet spot for heavier aircraft like Cessna and Maule while still providing the footprint and energy absorption critical in bush landings. 

The 31" ABI tires are handcrafted featuring an impressive ratio of weight to size. Their solid footprint makes these bush tires the de facto standard for bush pilots.

The 35" ABI tires are designed for the most rugged off-airport operations. They require ABI 10650 10" wheels.

The 35" Beaver ABI tires stand up to the heavier load of de Havilland Beaver and Pilatus aircraft with a gross weight up to 5600 lbs (2800 static load rating per tire).

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. They are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed and is available please mention during the order placement. In this case, additional cost may apply.

Inner tubes are also offered for tube type tires which generally share the same designation as the respective tire (e.g. a 5.00-5 inner tube fits a 5.00-5 tire) with exceptions when the inner tube can fit more than one aircraft tyre size (e.g. the 5.00-5 inner tube can be used in both the 5.00-5 as well as the 15×6.00-5 tires). Inner tubes are supplied with valves of different designs (e.g. straight or 90º bend valves) carrying respective designations. Accessories such as French Chalk, Valve Caps, and Cores are also available on request. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

TOST Flugzeuggerätebau designs and manufactures top quality products including aircraft wheels, brakes, tires, tubes, glider towing and launching equipment and tow releases serving the needs of aviation sports and industry. TOST and TOST AERO brands for tires are synonyms for safety in aviation. 

For more than 30 years TOST has manufactured aircraft tires from 3" to 10" exclusively under the TOST AERO brand with a long lifetime, robustness and capability for high loads and speeds. TOST AERO tires and tires from other brands can be used with TOST wheels designed to cover a wide range of applications in gliders, motor gliders, aircraft, ultralight, amphibium aircraft, helicopters and gyrocopters but also in heavy-duty applications. Matching tire tubes with different valves and valve extensions are also offered by TOST to cover application requirements.

For additional information please refer to the supplied documentation.

TOST Flugzeuggerätebau designs and manufactures top quality products including aircraft wheels, brakes, tires, tubes, glider towing and launching equipment and tow releases serving the needs of aviation sports and industry. TOST and TOST AERO brands for tires are synonyms for safety in aviation.. TOST wheels are used worldwide in gliders, motor gliders, aircraft, ultralight, amphibium aircraft, helicopters and gyrocopters but also in heavy-duty applications.

TOST Landing Wheels (LR) are designed for use in aircraft as nose wheel, tail wheel, support wheel or as unbraked main wheel and they are offered in different series and various dimensions and constructions. TOST Disk Brake Wheels (SB) are presented separately.

Mini 150 & 180 Series, fitting tire diameters 150 mm and 180 mm respectively, are the smallest available wheels with pneumatic or foam-filled tires providing good suspension and absorption properties. 

Moritz Series 3″ Tail Wheels are available in two versions: Moritz, a sturdy aluminium die-cast wheel hub with fins sector and Moritz II, a two-part wheel hub CNC milled from aluminium. 

Max Series 3.5″ Tail Wheels fit tire size 200 x 50, widely used for tail wheels of gliders and motor gliders.

Classic Series 4″ Landing Wheels can be used as sturdy nose wheels and main wheels or for special purposes.

Tria 4″ Landing Wheels are convenient for applications, in which a low weight combined with a high strength are required.

Classic Series 5″ Landing Wheels are used as aircraft nose wheels and other heavy duty applications. 

Penta 5″ Landing Wheels can be used to save weight as well as a possible replacement for landing wheels equipped with inch bearings. 

The 5″ Tubeless Landing Wheels can be used  to realisze a further weight reduction.  The weight decrease is about 15% in total weight compared to a wheel hub with tire and tube (tubetype TT).

Mike Series 6″ Landing Wheels from aluminium diecast with deformable fins sector are particularly suitable for high loads.

Penta Series 6″ Landing Wheels can save weight compared to the Landing wheel (LR) of the 6″ Classic series.

Classic Series 10″ Landing Wheels can be used in the range of high-tensile special applications.

Matching TOST AERO tires and tubes are offered for all TOST Landing Wheels. Please consult the tables with information on available tires and tubes for the different series.

For additional information please refer to the Product Description section and the supplied documentation.

RAPCO produces quality FAA-PMA approved replacement organic and metallic brake linings for Cleveland and McCauley brake assemblies on most general aviation aircraft. Organic linings are actually made from a semi metallic mix. RAPCO combines brass, copper and Kevlar fibers with a high temperature binding compound to provide outstanding performance and long service life. Most RAPCO organic linings have a built in wear indicator, which reduces the risk of damage to the brake disc and helps to optimize lining life. RAPCO organic linings are available in boxes of 10 or in organic lining kits containing the proper number of linings and rivets necessary for replacement on Cleveland or McCauley brake assemblies. They are convenient to have on hand when the need for relining occurs. Metallic lining replacements for the Cleveland brake assemblies are made of sintered steel, a specially developed process that fuses metallic particles to a steel carrier plate. RAPCO metallic linings offer long life and excellent braking performance.

RAPCO Brake Rivets are FAA-PMA approved quality tubular rivets produced from plated steel for mounting aircraft brake linings. The RAPCO RA825 Rivet Tool Kit is recommended for proper installation.

Please refer to the attached Application Guide for additional information.

Parker Hannifin (Cleveland Aircraft Wheel & Brake Division) designs and manufactures wheel assemblies for worldwide aircraft markets. Their wheels, used in conjunction with tires, provide support for the weight of the aircraft. Combined with brakes, they assist in directional and stopping control during aircraft ground maneuvers, taxi, takeoff, and landing. Cleveland Wheels and Brakes brand products are used on more than 80 percent of general aviation aircraft while their wheel assemblies  are now offered for military and business aviation applications. Cleveland's different product lines include both aircraft wheel and wheel and brake assemblies for nose and main wheels to meet a variety of application requirements.

Nose Wheel Assembly Features:

• Low maintenance for tubeless or tube-type

• Tapered roller bearings for dimensional stability and long life

• Molded grease seals for superior bearing bore sealing properties

• Split-rim design to allow ease of tire mounting

• High-strength through-bolts

• Sand castings and forgings

• Worldwide distributor network for quick parts availability

Cleveland's #40-77 Nose Wheel assemblies (FAA-TSO-C26c approved) are designed for 5.00-5 tube tires and intended for use in general and business aviation, turboprop passenger, and helicopter applications.

FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.

For more information on the parts and quantities per assembly please refer to the respective illustrative parts list or contact us.

(NCNR) product: non-cancellable/non-returnable once the order is placed. Often requires  backordering to the manufacturer. Delivery time cannot be specified.

For a number of years CLEVELAND WHEELS & BRAKES offered standard organic & heavy-duty asbestos brake linings for their wheels and brakes. In January 1988 these two types of brake linings were discontinued and a single, improved brake lining was introduced with improved performance and durability compared to older linings. Different versions are available to fit aircraft models based on their year of construction. Brake linings are sold as pad only or as kits together the required number of rivets. Most light aircraft take 2 linings per wheel. Extra rivets are also available. Please refer to the attached Application Guide for additional information.