RAPCO manufactures FAA-PMA approved pneumatic filter replacements for airborne assemblies. RAPCO filters are constructed to the highest industry standards. They utilize a 0.3 micron filtration media which provides superior filtration without undue air flow restriction. They help proper filtration of destructive contamination within an aircraft environment (such as system dirt and dust from the cabin and cigarette smoke) which often lead to the need for replacement of expensive gyro instruments & other components.  When changed on a scheduled basis they can reduce operating costs. 

RAPCO FAA-PMA approved RA-B3-5-1 Garter Filter Element is a filter replacement part for use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Product Specifications:

Garter Filter Element

Polyurethane foam, 1” long x 1-3/4” diam. 

For use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Recommended Replacement: 100 hours/ 1 year

RAPCO FAA-PMA approved D-9-18-1 Central Air Filter Element replacement is intended for use with Airborne 1J7-1 filter assembles, for vacuum systems. 

Product Specifications:

Central Air Filter Element.

Pleated filter, screen with bonded rubber end seals. 

3-1/4” long x 2-7/8 diam. 

For use with Airborne 1J7-1 filter assembles, for vacuum systems

Recommended Replacement: 500 hours/ 1 year

Note: 

The products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case. Additional charges may apply.

FACET FILTRATION GROUP® is the global leading manufacturer of filtration products and systems with an extensive range of products including filter cartidges, housings, water treatment equipment and complete systems. Group products are covering a wide range of applications from aviation fueling and onshore, offshore or onboard marine applications to protection from debris and water contamination of diesel fuel supply of heavy equipment and water treatment facilities. FACET® fuel pumps and filters for aviation uses are separately presented.

LEAR ROMEC is a brand of CRANE AEROSPACE & ELECTRONICS for fluid management solutions in aircraft, gas turbine engines and radar cooling systems. The LEAR ROMEC products are suitable for applications in the commercial transport, general aviation, business, regional jet and ground based gas turbine markets.

CRANE AEROSPACE & ELECTRONICS is a world leader in the design and manufacture of high performance, technology, accuracy, and reliability positive displacement pumps, centrifugal pumps and true mass flowmeters, under the company's ELDEC, HYDRO-AIRE and LEAR ROMEC brands, which are used in aerospace and defense applications.

Product lines include:

- Vane type positive displacement lube & scavenge pumps featuring high reliability and volumetric/mechanical efficiency, excellent flow performance at high altitude/low inlet pressures, excellent priming performance, lowest weight option for high flow pumps (such as Geared Turbofan) and high contamination wear resistance,

- Fuel Flow Transmitters (FFT) for aircraft engines featuring a +/-0.5% accuracy performance of flow point in the engine cruise range, form factor and flow conditioning for difficult installations,

- Centrifugal pumps for fuel, water and coolant applications of different drive types including gearbox driven, hydraulic motor driven, 400 Hz fixed frequency AC, 28 VDC brush and brushless, and 270 VDC brushless. Like the lube & scavenge pumps, these pumps are characterised by high reliability and volumetric/mechanical efficiency, priming performance and contamination wear resistance.

LEAR ROMEC customer owned fuel pumps can be overhauled or offered in overhaul/exchange condition for immediate shipment. In case of no core returns, core charges apply. Please see below an indicative list of available LEAR ROMEC fuel pumps for overhaul/ exchange or contact us for additional information.

LEAR ROMEC Part Numbers: 

RG15980 | RG15980P 

RG17980 | RG17980A | RG17980A/M | RG17980/M | RG17980D | RG17980D/M | RG17980E | RG17980E/M | RG17980J | RG17980J/M | RG17980K | RG17980K/M | RG17980P | RG17980P/M | RG17980U | RG17980U/M

RG9080F1 | RG9080F1/M | RG9080F2 | RG9080F2/M | RG9080G1 | RG9080G1/M | RG9080G2 | RG9080G2/M| RG9080H1 | RG9080H1/M | RG9080H2/M | RG9080J1 | RG9080J1/M | RG9080J4A | RG9080J4A/M | RG9080J6A | RG9080J6A/M | RG9080J7A | RG9080J7A/M | RG9080J8A | RG9080J8A/M

RG9570K1 | RG9570K1/M | RG9570K2 | RG9570K2/M | RG9570K3 | RG9570K3/M | RG9570K4 | RG9570K4/M | RG9570P1 | RG9570P1/M

DONALDSON® COMPANY INC. is one of the largest filtration manufacturers in the world, providing filters and filtration components for a wide range of applications including commercial airliners, military applications and general aviation aircraft, agriculture and forestry, construction, mining,  truck, and bus manufacturers as well as other markets.

DONALDSON® AEROSPACE FILTRATION (AFS) cleaners/degreasers and oils are used in inlet barrier filters to bring the filters back to full capacity after their cleaning process. Offered in 1 US gallon and 5 US gallon sizes. Filter Cleaning Kits are also offered containing 1 US gallon of AFS Oil, 1 gallon of AFS Cleaner/Degreaser, a 16-ounce bottle and spout for re-oiling, a cleaner/degreaser sprayer, and seamer pliers (2-inch and 6-inch).

For additional information please consult the supplied documentation.

CURTIS PLT-275AV Flush Valves 6 Holes' Adapter Plates Assembly.

Product Specifications:

Diameter: 2.75 in.

Depth: 640,000-650,000

From Mounting Surface to Bottom Hole Diameter: 1-1/2 in.

Not Certified

FILPRO CORPORATION manufactures a wide range of high quality industrial filter parts intended for use as replacements to respective OEM products meeting or exceeding their specifications. All FILPRO offered filters are direct replacements in form, fit and function for the respective reference numbers of  OEM products. The company is also a distributor of OEM brands covering  air, liquid and gas filtration needs.

Offered FILPRO product portfolio includes Air Filters, Compressor & Vacuum Pump Filters, Hydraulic & Oil Filters, Dust Collector Filters, Liquid Filter Cartridges, Liquid Filter Bags, Spilltech Sorbents as well as Custom Filter Designs. FILPRO filtration products are used worldwide by OEM’s and end users in virtually every industrial application. Some of the major industries served include: Agriculture, Air Conditioning, Automotive, Government, Aviation,  Defense, Chemical Processing, Conveying, Food and Beverage Processing, HVAC, Hydraulics, Industrial Gas Production Irrigation, Medical, Metal Processing Packaging, Paint Processing, Petroleum, Pharmaceuticals, Plastics, Pneumatic, Printing, Pulp & Paper, Refrigeration, Tool & Machine, Transportation, Utilities, Vacuum Cleaner, Water Purification & Wastewater Treatment. For additional information on FILPRO filters please consult the supplied documentation or contact us.

PTI® TECHNOLOGIES designs and produces a wide range of FAA-PMA approved filter elements for Hydraulic Systems, Engine Fuel, Lubrication and Pneumatic Systems as well as Screens and Strainers.

Hydraulic Systems

PTI® TECHNOLOGIES hydraulic filter elements are used in today’s commercial and military aircraft and ground support systems. Filter elements comprised of depth-type filtration media combine high efficiency particle removal while optimizing contamination capacity. Operating environments include pressures up to 5,000 psid and temperatures ranging from -65°F to 350°F. 

Engine Fuel, Lubrication and Pneumatic Systems

PTI® TECHNOLOGIES provides filtration solutions for engine applications ranging from the PT6 to the PW4000 series engines. Applications include fuel, lubrication and pneumatic systems. Filter elements of the constructed of depth-type filtration media or woven wire mesh are offered in both disposable and cleanable configurations.

Screens and Strainers

In addition to pleated filter elements, PTI® TECHNOLOGIES provides screen, strainer and metal edge type filter elements for use in last chance, fuel wash flow, scavenge lube oil and other systems requiring protection for downstream components.

PTI® TECHNOLOGIES filter elements come with Certificate of Conformance as standard. If additional certification (FAA Export Form 8130-3) is needed, an additional charge is applied.  If additional certification is needed, manufacturer's certification and a FAA Export 8130-3 form can be provided with any qualifying filter item at extral cost. In this case please select listed products with the extension "CERT" in the product reference code (SKU) from our offered items.

WELDON J Series FAA-PMA fuel pumps work with different fluids including gasoline, jet fuels, diesel fuel and oils. They can be used (depending on selected pump) for a variery of applications including emergency fuel boost, priming injected engines and others.

Appearing prices include core charges for no core reurn.

ZF FRIEDRICHSHAFEN AG (also known as ZF Group) is a global technology company offering products and systems for vehicle motion control, integrated safety, automated driving, and electric mobility. The product portfolio is continuously enhanced and adapted to the market conditions and safety requirements. ZF products and systems ae extensively used in passenger cars, commercial vehicles as well as in various other sectors such as defense and aviation industries, construction and agricultural machinery, wind power, marine propulsion, rail drives and test systems. ZF Aftermarket is world's leading supplier in the automotive and industrial aftermarket, offering an exceptional product range of OE quality spare parts and services.

ZF has decades of experience in the design and development of marine propulsion systems. The company offers complete driveline systems as well as components for all types of vessels – motor yachts, watersports boats, high-speed ferries, workboats and commercial vessels, in a power range from 10 to 12,000 kW. The product portfolio includes a comprehensive range of transmissions (reversing, non-reversing and hybrid), propellers, steering systems and CAN-bus-compatible electronic control systems, azimuth thrusters, tunnel thrusters and sail drives. ZF spin-on transmission gearbox oil filters are used in different series of ZF Marine Propulsion Systems. With high quality, intelligent design concepts and individual service, ZF guarantees minimum downtimes and low life cycle costs. Customer range for these systems include shipyards, ship owners and operators as well as engine manufacturers worldwide. 

For additional information please consult the supplied documentation.

CHALLENGER AVIATION PRODUCTS, Inc. manufactures high quality oil-impregnated, surgical cotton gauze-based aircraft air filters under FAA/PMA certification using K & N filter media. K&N Performance Filters have been well known in the automotive world for years, unsurpassed in airflow and filtering capability they are now one of the most used filters on the road today. Made of a woven cotton fabric instead of paper, the K&N filter medium offers superior filtering without the restriction of airflow presented with paper or foam filters. Fabric allows 50% more air to pass than paper, and almost 60% more than foam. This translates into more horsepower and improved fuel economy.

Based on K&N technology CHALENGER filters have been certified for most general aviation aircraft. Their pleated cotton/wire mesh filters are far less prone to being clogged than synthetic media or paper, and tests done by Challenger (at approximately 240 CFM air flow) show K&N filters typically flow 6.03 CFM as compared to 4.95 for the average pleated paper element and 4.93 CFM for the oil-coated foam variety.

CHALLENGER air filters can be used as replacement parts to other OEM products but an STC (available by CHALLENGER) is required. Air filters come with an application chart, instructions, warranty card and a STC request form which needs to be  filled out for approval for the specific aircraft. The filters comes with a gasket, but do not include the grease which is sold separately, unless otherwise stated.

Product Features:

Can be washed & serviced up to 25 times

Increase horse power 2-4%

Fire Retardant

Save money & improve efficiency

FAA-PMA approved

Ecologically sound

Better take-off and climb-out performance

Faster airspeed and/or better fuel consumption

Accordion fold design provides up to 5 times filtering surface of non-pleated designs

Please refer to the attached documentation on the application of CHALLENGER filters in different aircraft/models.

Filler opening caps are parts basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. They are either permanently attached or provided with a means of removal and replacement. 

Pressure refuel caps are used to lock, seal, and vent the pressure refuel port for an aircraft fuel tank. Pressure refueling allows for single point refueling on larger aircraft and can be used with all aircraft fuels. To fuel the aircraft, the caps are manually actuated by pressing down on the handle, which will vent and unlock the cap for removal by twisting. The cap remains attached to the aircraft by a lanyard. Once refueling is complete, the cap is inserted back onto the adapter and twisted until locked into place, which effectively reseals the pressure refuel port.

Pressure refuel caps are offered by different manufacturers such as Parker Aerospace, Eaton Coporation and others. They are designed in accordance with military specification MIL-C-8605B (for technical requirements) and MS29526-2(for envelope requirements).

Those from Parker Aerospace are 4.5 inches diameter, with an indexing feature and they fit into a 2.5-inch pressure refuel adapter per military specification MS24484. Their main features include an aluminum base and handle, a fluorosilicone O-ring seal, and antisparking brass chain lanyard (per industry standard RR-C-271) with a plastic tubing cover and corrosion resistant steel hooks.  Lanyards can also be fabricated with corrosion-resistant steel or flexible plastic and fuel resistant tubing. Optional features are also available such as key lock, ventilation, hinge, visual fluid level indicator, dust cover easy-lift handle and contoured adapter.

For additional information please consult the supplied documentation or contact us.

CURTIS Superior Valves are designed for installation in a standard NPT port for NPT threaded valves or an AND-10050 stlye port for UNF threaded valves. CURTIS CCA valves are quick opening brass drain valves for aircraft oil or fuel systems. A slight twist opens the valve. No safety wire needed in closed position. FAA approved. TSO-C76 Approved. Available in different thread sizes and lengths in inches.

Use a sealant on NPT threaded valves or a fuel resistant o-ring of the proper size for UNF threaded valves. Refer to aircraft manufacturers torque specifications for the aircraft in which it is being used. Curtis Superior Valves require no special maintenance. Keep them reasonably clean and replace according to the prescribed synthetic rubber maintenance schedule for the aircraft in which they are used or 10 year usable life per Curtis Superior Valve whichever occurs first. Curtis Superior Valves cannot be OVERHAULED. Replace the entire valve per the maintenance schedule of the aircraft in which it is used or usable life per Curtis Superior Valve should it begin to leak.

Note: FAA Approval applies to fuel applications only. NOT FAA Approved for oil applications.

FILLER NECK offers a variety of cap neck styles and materials which can support oil, fuel, hydraulic or water applications. Accessory options can be used to build the filler assembly you need. Three different strainers provide varying degrees of filtration for 300 Series caps and necks to help maintain clean fluids within the engine system. Special mountings match the type of connections required.

Fuel and oil drain valves for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

Barksdale B1S series are bourdon tube stripped high accuracy pressure switches with a working pressure up to 18,000 psi.

Barksdale's bourdon tube pressure switches offer instrument class accuracy, making them an ideal solution to your pressure control needs when accuracy is critical. Built-in over-travel stops allow for higher proof pressures than most other pressure switch technologies. Setpoints are easily adjusted via an internal adjustment screw. Available in single and dual configurations, Bourdon Tube Pressure Switches are adaptable for use in a wide range of industrial applications. A variety of limit switches is available to allow for a multitude of electrical switching conditions. For applications requiring a highly accurate switch in a highly durable package, Barksdale's bourdon tube pressure switches are the ideal solution.

Offered pressure switches in B1S series are of single setpoint. Connection material is stainless steel and electrical connection is through lead wires.

Product Features:

High accuracy

High pressure up to 18,000 psi

Tamper-proof external adjustment

Single and dual switching capability

Water tight housing versions available (NEMA 4)

Applications:

Oil & gas

Medical applications

Mining

Compressors

Power plants

Water pumps

Hydraulic power units

Pneumatic devices

General industrial applications

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered  (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

FS20 series 3/8" fuel selectors provide a choice of lower and side fittings, and all units can be operated with an extension and universal joints. They come in the following types:

Type 1 (FS20-1): simple 3/8” ON/OFF shut off valve with 90 degrees action between the two positions. There are two ports and either port can be used as the inlet or outlet.

Type 2 (FS20-2): Three way 3/8” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 3 (FS20-3): three way selector with the positions LEFT - RIGHT - OFF. Generally used in low wing aircraft with a tank in each wing.

Type 4 (FS20-4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.There are 3 ports. The lower port is the outlet to the engine and can be Male AN-6, Female 1/4NPT or a  360 degree Banjo adjustable fitting with a male AN-6 end.

Type 5 (FS20-5): 4 way Fuel Selector ( 3 tanks and OFF ) with positions LEFT - MAIN - RIGHT - OFF, each at 90 degree intervals.

Type 7 (FS20-7): Newest in the range 3 way fuel selector with positions LEFT - RIGHT - OFF. The inlets are at the 45 degree positions, to the LEFT and RIGHT, and the outlet is at the base of the valve. FS20-7 has been designed for centre consol mounting.

Type 8 (FS20-8): 5 way Fuel Selector ( 4 tanks and OFF ) with positions LEFT TIP - LEFT - RIGHT - RIGHT TIP - OFF, each at 72 degree intervals. 

For additional information please refer to the product presentations, the supplied documentation or contact us.

ACS US made all-metal gascolators are offered in two models:

10580 Homebuilders Gascolator - Homebuilders gascolator for use with aviation fuel and standard auto fuel

All-metal gascolator for use with aviation fuel and standard auto fuel with S.S. screen, 1-7/8" dia. cadmium plated steel bowl w/quick drain. Top is CNC machined from 6061-T6 aluminum. Top has 1/4" pipe ports for 3/8" fuel line and one 1/8" pipe port for primer fitting. Wt: 8 oz. May be used with aviation and/ or auto fuel. Replacement gasket for auto fuel is p/n 06-00441. Made in USA.

Not to be used with fuel injectors because it cannot stand up to the pressure.

10585HP High Pressure Gascolator - High Pressure gascolator with lighter weight and simpler design

New ACS high pressure gascolator. Lighter weight and simpler design than the ACS "classic" gascolator. Bailwire and attaching hardware have been eliminated. Threaded collar secures bowl to top. Tested to 50lbs. Bowl is cadmium plated and top and collar are anodized for corrosion protection. Top has 1/4" pipe ports for 3/8" fuel line and one 1/8" pipe port for primer fitting.

10371 Gascolator Bracket - Mount bracket suitable for  gascolators with either metal or glass bowl

Suitable for  gascolators with either metal or glass bowl.

Versatile bracket of .016 stainless steel accommodates gascolators with either metal or glass bowl. When mounted as illustrated, inlet and outlet connections are on sides. When bracket is inverted, one port of gascolator faces firewall for direct routing of fuel line through firewall. A fine quality item manufactured by ACS Products Co. Fits gascolators sold after May 1, 1989.

The gascolator hole in the mount is approx 1-7/8".

Replacement screens (filters) and other parts are also available.

The PARKER AIRBORNE designs and manufactures motor driven fuel fuel  boost and transfer pumps and is part of the PARKER AEROSPACE GROUP of the PARKER HANNIFIN CORPORATION. These pumps consist standard equipment by the world's leading airframe manufacturers. The PARKER AIRBORNE product range includes:

- In Line fuel pumps for low-flow fuel applications,

- Submerged Centrifugal fuel pumps,

- High Performance Centrifugal fuel pumps for use in turboprop or turbofan jet aircraft,

- Submerged Duplex fuel pumps with two distinct pumping elements

The PARKER AIRBORNE fuel boost pumps use 28 V direct current (DC) to drive a highly efficiency, brushless DC (BLDC) motor or 115.5 V alternating current (AC) three-phase induction motors. The BLDCmotor-driven pumps incorporate integral electronic controllers using Hall Effect sensor rotor-position feedback. The hardware-only controller doe not use any software or programmable logic devices. These pumps feature:

-fuel cooled motor and electronics

-fuel wetted carbon bearings allowing for long-life fluid film design with no rotating shaft seals

-a high efficiency brushless DC (BLDC) motor or a three-phase induction motor

-qualification for high levels of lighting and electromagnetic interference (EMI).

The PARKER AIRBORNE fuel boost pumps can be furnished as either NEW, NEW EXCHANGE or OVERHAUL EXCHANGE. 

Offered pumps in OVERHAUL Condition are supplied in accordance with FAA-approved process specification, come with a FAA Form 8130-3 and can be provided in exchange of existing customer owned units (cores). In all EXCHANGE cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable condition. For additional information please consult the supplied documentation (*) or contact us.

In addition to the PARKER AIRBORNE pumps, RAPCO FAA-PMA approved pumps are also offered as direct replacements  to the respective PARKER AIRBORNE models. The RAPCO replacement pumps can be furnished as either NEW EXCHANGE or OVERHAUL EXCHANGE (please refer to their separate product presentation).

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenance manual, parts catalogue, or equipment list for approved data.

NEWTON CONSULTING offers a range of SPRL branded fuel valves featuring distinct features that make them better than the rest. Ceramic disks have no soft moving/rubbing seals to wear out, unlike other valves but also give an 'indefinite' life with a very smooth light action. The lift and turn selector of SPRL valves is instinctive, secure, and easier to use than the complex 'lift button' type. The locking detents avoid accidental movements. The fixings match most installations, and the internal ports prevent cross feeds, unless 'selected to 'Both'. Their lightweight alloy construction is anodized for protection while the Viton O-ring seals are suitable for all current fuels. Male AN fittings enable plumbing straight into the aeroplane system with no extra fittings required.

The SPRL Valves, as designed, have a very nice 'feel' and are logical in use, however, there is a requirement in FAR 23 whereby the fuel valve must be turned from OFF to an ON selection simply by turning it, i.e. it should not have to be lifted up, pushed down etc, and it should also not be possible to turn it from an ON position to OFF without a dent.

Fittings must be purchased separately. Please refer to the separate NEWTON fittings product presentation.

Genuine DEUTZ filters provide the highest quality, best filtration performance and long service life leading to optimum protection, consistent performance and low fuel consumption of the engine. DEUTZ Air filters provide reliable filtration of combustion air, preventing dust from entering and causing increased wear inside a combustion engine. DEUTZ Oil filters preserve the engine performance and reliability protecting it from wearing and damage caused by dust, soot and other particles. DEUTZ Fuel filters provide highly efficient separation of harmful particles and water ensuring high fuel quality and engine protection from compromised engine´s performance and shortening of its life cycle.