The RCA 56 Series of electric turn and bank indicators by KELLY MFG (RC ALLEN) are an all volt instrument, with a power warning flag, a black or white ball inclinometer and either lighted or non-lighted. These rate-of-turn pointer controlled instruments are powered by an electrically driven DC precision gyro with an inclinometer providing the pilot with turn and bank information.  They meet or exceed requirements of FAA TSO C3b. Made in the USA. Weight: 1.9 lbs.

Dimensions: Length: 6 1/4 in. Max, Width: 3 3/8 in. Max, Height: 3 3/8 in. Max

Mating Connector: MS3106A10SL-3S.

Connector Pin Out: A: +11-30 VDC, B: Ground, C: Spare

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

The AVIASPORT fuel pressure gauges  have been designed especially to measure fuel pressure in Rotax® engines 912 and work both with 12V and 24V systems. Unlike mechanical gauges, the AVIASPORT ielectronic gauges use a high precision sensor to be installed close to the engine, preventing fuel lines in the cockpit. These gauges are sold without sending units or as kits with matching senders whenever specified.

UMA Non FAA Approved standard 2-1/4" and 3-1/8" altimeters are high quality, simple type (single pointer) with 2 revolution dial, designed to meet the needs of the low cost non-IFR users. Both altimeters utilize a knob adjustable barometric in. Hg scale, viewed through a Kollsman Window.

Product Specifications:

Case: Aluminum Casting

Weight: 10.6 oz. 

Case: Valox 420 Plastic

Weight: 5.0 oz.

Not FAA Approved

HONEYWELL BENDIX KING® KNI-582 Radio Magnetic Indicator (RMI) provides bearing information to either ADF or VOR stations by means of two pointers each of which is read against compass card. The KNI-582 RMI requires inputs from ADF, HSI and NAV receivers and combines three data points on one indicator. The current aircraft heading from an HSI is shown on the card. The magnetic headings to VOR and NDB stations are shown by the twin needles. By combining all this information visually, less interpretation is required thus enhancing overall situational awareness, something especially helpful when the workload is high.

Product Features:

Dual pointer RMI

Accepts AC SIN/COS, DC SIN/COS, Serial, and VOR Composite inputs

Compatible with NAV Receivers such as KN-53, KNS-80, KNS-81, KX-155/165, KX-170B/175B, KNR-615, KNR-630, KNR-634, KNR-665, KNR-665A

Compatible with ADF receivers such as KR-85 (w/ KI-227 -01/04), KR-87, KDF-800/805/8000

Compatible with Compass Systems and NAV indicators such as KCS-305, KCS-55/55A, and KPI-550

Models available with 5 or 28 volt lighting 

Models available with black or gray bezel

TACAN compatible and night vision goggle versions available

TSO'd

Specifications:

Altitude: To 50,000 feet

Operating Temperature: -20 to +55°C

Weight: 3.0 lbs. (1.4 kg)

Power Requirements: 28V 4A / 26VAC 6VA

TSO Compliance: Env. Cat. RTCA DO-160A A1D1/A/SKP/XXXXXSABAAA; TSO C6c (compass); TSO C41c Class A (ADF); TSO C40a (VOR)

Compass Heading Input: Operates from any slaved magnetic compass with ARINC X,Y,Z outputs.

1-1/4 inch TSO'd Electronic Fuel Pressure Gauges from UMA INSTRUMENTS. Black & White dial marking. Available in different pressure (PSI) ranges. Case: Aluminum. Weight: 4.0 oz. UMA sensors are sold separately.

The HONEYWELL BENDIX KING® KI 525A HSI is a pictorial navigation indicator used in the KCS-55A compass system which also includes KG-102A Directional Gyro, KMT-112 Magnetic Azimuth Transmitter (flux valve), KA-51B Slaving Control & Compensator Unit and optionally KA 52/KA 57 Autopilot Adapters. It was a popular avionics upgrade for light aircraft until the advent of the Sandell electronic HSI and, more recently, glass-cockpit systems from Garmin, Aspen and others. This indicator combines the display functions of both the standard directional gyro and the course deviation indicator offering the pilot a single view of the horizontal navigation situation. It greatly simplifies course orientation, interception, and tracking resulting in less work from the pilot. Internally lighted, the KI 525A operates at 14 or 28 VDC.

The HONEYWELL BENDIX KING® KI 525A HSI is available in different models to serve application requirements:

- with bootstrap heading synchro to provide source of slaved heading information for any device, such as an autopilot

- with glideslope needle damping for use in high vibration environments such as helicopter

- capable of operating at either 30Hz or 400Hz

- capable of operating at 14 or 28VDC and 5 volt operation

Like other KCS 55A compass system components, the  KI 525A indicator can be furnished in NEW condition or as USED in Serviceable or Overhauled conditions indicated respectively by the letters "SV" and "OH" in the product reference numbers (SKU and  accompanied by the relevant certification (e.g. yellow tag, 8130-3 form). They are also offered as exchanges / trade-ins  for returned customer owned units indicated by the letter "EX" in the SKU.  In the case of an exchange/trade-in option of a customer unit, the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders when our co-operating supplier verifies that the unit is in a reasonable, repairable condition. It is recommended that this option is selected by our customers mainly for upgrades and only in cases when their units are functioning properly at the time removal from the aircraft. In cases when customer units are found by our supplier to be non-repairable, the core deposit shall not be refunded and shipping charges shall apply if customers wish the return of these units to them. Please refer to the Product Description section for technical specifications and additional information.

TSO'd Electronic Fuel Quantity gauges from UMA INSTRUMENTS (indicated by the letter "T" in the PN) are offered in 1-1/4 in. and 2-1/4 in. sizes for installation in respective panel hole diameters and mounted with (4) 6-32 screws. Smaller 1-1/4 in. instruments can be cluster mounted as close as 11/2” centers utilizing panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on black analog dials with white easy to read markings indicating empty to full fuel level. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Available in different versions based on their sender type and range. UMA sensors are sold separately.

This 2-1/4 inch flap indicator uses a resistance potentiometer as a flap position sensor. Transmitter is required. Wt: 9.8 oz.

UNITED INSTRUMENTS 8000/8100 Series Air Speed Indicators (ASI) are FAA TSO'd for installation on certified aircraft. 

The 8000 Series ASI indicate the speed relative to the air at sea level altitude. The 8100 Series True ASI indicate the speed relative to the air at sea level or the desired altitude.The indicator has an inner dial to indicate true airspeed. The altitude and temperature are the conversion factors used to obtain this reading with the use of a setting knob. 

When properly connected to an airspeed tube, the 8000/8100 Series airspeed indicators measure the differential pressure developed between the pitot and static opening. 

The pressure is indicated in units of airspeed mph (M) and/or knots (K).

Product Specifications:

Certification: FAA TSO C2b 

Case Configuration: MS33638, 3 inch

Typical Weight: 0.7 pounds

Static, Pitot Pressure Connector:   1/8-27 ANPT

Installation: Removable spring nuts and #6-32 screws

Lighting: Available upon request. All lighted instruments require a light tray sold separately. Please refer to offered SIGMA-TEK 5000B 14V or 28V Light Tray.

KANARDIA INDU Series round altimeters are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature colour LCD display, one or two pointers  with possibility to personalise scales (in feet or meters) and LCD displays. They are offered as standalone (master) altimeters with internal pressure sensors or as slave instruments. The slave version requires some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") with one pointer and 80 mm (3.15") with two pointers. They can also be ordered with integrated backup battery at additional cost. The backup battery can also handle and additional indicator, typically an airspeed indicator.

Accelerometers (aka G-Meters) are used extensively in a wide range of applications including Aviation, Marine, Automotive, Military, and others. They are also used  in inertial navigation and guidance systems in airplane and ship autopilots.They help in a better understanding of static, such as gravity, or dynamic forces due to motion or vibration acting on an object.

Original Mechanical and more recent Digital accelerometers, used on civil and military aircraft, measure the instantaneous acceleration (or G-force) of an aircraft and its occupants compared to Earth's standard gravitational pull, in units of "G" (e.g., 1G, 2G). They enable pilots to monitor flight conditions, maintain safety, or practice aerobatics or combat maneuvers. Made by different manufacturers, they are offered as non-certified instruments, for use on  experimental and homebuilt aircraft, or certified products, installed on civil transport an military aircraft.

Mechanical accelerometers, separately listed, use traditional components like proof masses, springs, and damping to measure acceleration based on displacement, offering high accuracy and durability for specific applications like flight stabilization and weapons communication. They are often of larger size and more expensive. Digital accelerometers, included in this listing, are often Micromachined Micro-electromechanical (MEMS) systems, integrating sensors with microelectronic circuits for smaller size, lower cost, and high precision, making them ideal for flight stabilization, AHARS, and autopilot systems.

The choice of an accelerometer depends on the application's need for accuracy, size, cost, and resistance to harsh environments. 

Please consult the Product Description section and the supplied documentation for more information on different brands of our offered accelerometers.

The RCA 82A/83A Series TSO'd turn coordinators by KELLY MFG (RC ALLEN) can be found in many production aircraft around the world. They Incorporate an electrical gyro turn indicator with an inclinometer. The turn motion is presented by an airplane symbol banking on a fixed horizon. The inclinometer, by movement of a ball in relation to the lubber lines, indicates the slip angle of aircraft while in a turn. The airplane on the dial rotates with reference to the indices. A power failure flag drops into view whenever the supply voltage is lost or when dropped below a level acceptable for proper operation of the gyro. Operates from 11 to 30VDC. Available in lighted and unlighted versions. First installation requires electrical connector and clamp. Mating Connector: MS3106A-10SL-3S.

Product Specifications:

Meet or exceed requirements of FAA TSO C3b 

Made in the USA

Dimensions

Length: 6 1/5 in. Max

Width: 3 3/8 in Max

Height:3 3/8 in Max

Weight: 1.9 lbs.

Description: 

Unlighted

Mating Connector:

MS3106A-10SL-3S

Connector pin out:

A: +12 -30VDC

B: Ground

C: Spare

The FLYdat Engine Management Unit (EMU) has been specially developed by TL ELEKTRONIC for BRP-ROTAX® aircraft engines for storing & indicating engine operating data including Engine Speed, Cylinder Head temperature (CHT), Exhaust Gas Temperature (EGT), Ambient Air Temperature (not on 912 / 914  engines), Cooling Water Temperature of  (only on 582 UL, 618 UL engines), Oil Temperature & Pressure (only on 912 / 914 engines) & hours of operation. It featured  8 sensor input ports, variably occupied according to engine type. In addition, all the input ports were equipped with an alarm, responding when the signalled engine operating value was equal or above the respective stored operating limit. The FLYdat could be used with BRP-ROTAX® 447 UL SCDI, 503 UL DCDI, 582 UL DCDI, 618 UL DCDI, 912/914 DCDI series engines.The engine type, engine number, hour of operation, temperature unit and the respective engine limits could be programmed.

The FLYdat is no longer a listed TL ELEKTRONIC product. It can be replaced by its direct successor, TL ELEKTRONIC Integra TL-6724 Digital EMS, developed in cooperation with BRP-ROTAX®, which forms part of Integra family of Multifunctional Flight Instrument (EFIS) &  Engine Monitoring Systems (EMS) for Light Aircraft. FLYdat units in NEW SURPLUS & USED Conditions, and related parts, may still be supplied depending on existing inventories. Other Aircraft Engine Monitoring Systems (EMS) from different manufacturers (listed separately) are also offered and they could also be considered as alternatives. 

The Integra TL-6724 multifunctional EMS integrates all primary engine instruments (i.e. Tachometer, Manifold Pressure Indicator, EGT, CHT, Oil and Water Temperature Indicator, Fuel Quantity, Fuel Pressure and Fuel Flow Indicator, Voltmeter, Ammeter, Timer, IAT, OAT etc.) and also propeller control for Constant Speed and Choke Control. Designed for use with all light aircraft engines. Its EFIS counterpart, TL-6524, integrates all primary engine instruments and also includes navigation systems (HSI, CDI with connection to the popular Garmin SL-30 and many others) and worldwide 3-D terrain maps. For a total glass cockpit solution, TL-6624 EFIS & EMS Integra integrates all the features of TL-6524 and TL-6724, while TL-6824 Remote Integra Display is also offered displaying all flight and engine data measured by TL-6524, TL-6624 and TL-6724. 

Integra glass cockpit instruments include advanced features such as wide viewing angles, brilliant color and direct sunlight readability,  comfortable, user-friendly control of functions,backlight of buttons & sensors for automatic dimming,display of analogue instruments,downloadable values of engine functions through USB port,constant monitoring of all measured engine operating data,direct headphone voice warnings,internal back up battery etc.

Non-certified INTEGRA devices should not be installed in a certified aircraft. 

For additional information contact us.

RS FLIGHT SYSTEMS develops and manufactures avionics for general aviation and flight test equipment. RS FLIGHT SYSTEMS range of avionics includes Engine Management Units for Rotax 912 iS / 915 iS engines, engine panels, automatic propeller speed control unit (SCU), and SCU front panel, iS Data Recorder for Rotax iS engines (912iS / 915iS / 916iS), control panels, portable test bench for independent drive of BRP Rotax iS engines, real-time wind indication system, Fly by wire control sticks, CANaerospace based flight test instrumentation  and more. 

The RS FLIGHT SYSTEMS 2nd generation ROTAX® 912iS/915iS Engine Management Units (EMU) include 2 cockpit mounted engine monitoring, data logging & propeller control devices, EMU 912iS evo & EMU 9xiS. Both feature the same hardware, software and functionality but differ in dimensions and weight. They integrate seamlessly into the Rotax 912iS/915iS engine wiring harness, providing indications of all available engine parameters, engine status, ECU faults and additional sensor inputs. Suitable for 14 V and 28 V aircraft electrical systems with minimum installation effort. Configurable for use with different unit systems. Additional features: sunlight-readable backlit display, dual optically isolated CANaerospace data bus interfaces for retained redundancy, continuous monitoring and health checking of both ECU display buses, georeferenced data recording of all parameters at 10 Hz over up to 2,000 hours, simple data transfer & software update via an integrated memory card slot, sophisticated visualization & processing tool for recorded data, Google Earth file export of recorded data inc. GNSS and engine data. Wiring Harness Kit (incl. power supply wires) is also available (sold separately). A separate module (sold separately) provides connection to 912/914 carburetor Rotax engines.

For more information on RS FLIGHT SYSTEMS products please consult the Product Description section and the supplied documentation.

AN5771-4A style 2-1/4 inch hydraulic pressure gauge with steel case connecting directly to the aircraft's hydraulic system. Fits in a 2-1/4" dia. panel opening and has a threaded 1/4"  connection for a fitting. Range: 0-2000 PSI. Only available in Overhauled Condition. Certified with fresh Matte-white dial. Yellow-tagged. Limited availability.

For new design projects and applications please refer to the presentations of alternative TSO'd and non TSO'd electronic hydraulic pressure gauges and pressure senders offered. 

Pressure Transducers (Senders) whenever required, ARE NOT INCLUDED in the prices of hydraulic pressure gauges. They are sold separately.

Note: A yellow tag is similar to a FAA 8130-3 Serviceable tag both denoting the "Serviceable" condition of the product i.e. it has been  repaired as needed, tested according to the manufacturer's procedure, meet the manufacturer's performance specifications and ready to return to service. Yellow tags are issued and widely accepted in North America while a FAA 8130-3 Serviceable tag is is accepted worldwide. The acceptance of yellow tags by national Civil Aviation Authorities should be checked by potential buyers prior to ordering.

OMRON A3C series cylindrical pushbutton switches have the basic design as the M2C Series cylindrical indicators. They provide a high-intensity uniform surface lighting while they have a miniature size with excellent feeling of operation. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

KANARDIA HORIS Air Data-Attitude/Heading Reference System (AD-AHRS) includes several state of the art sensors and combines them into a small PFD display. It can serve as standalone PFD displays and it can be used as a primary instrument or as a perfect backup. It is offered as standalone (master) device with integrated sensors or as a slave unit when an I-ALT-IAS or EMSIS PFD or NESIS are present on the CAN bus. AD-AHRS standalone unit shows: attitude (roll, pitch), airspeed (IAS and TAS), vertical speed (Vario) indication, altitude, outside temperature, QNH setting, heading rate (1 minute and 30 seconds turn), tracking course (True or Magnetic). It is offered for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15") and comes supplied with digital outside temperature sensor.

Product Features:

very low power consumption (< 2W at 12V),

low cost,

precise altitude pressure and IAS (indicated airspeed) sensor – connects to pitostatic,

precise angular rate sensors – gyros and accelerometers,

GPS receiver,

digital outside temperature sensor,

lightweight design (weighs only 235 g),

CAN bus compatible.

Available Options for HORIS AD-AHRS 57/80 (sold separately). They must be specified at the time of ordering.

MAGU Electronic magnetic compass.

AP-K Two servos for the two axis autopilot function. Must include also AMIGO.

AMIGO Autopilot panel for direct access to Autopilot functions. Must include also AP-K.

SWIFT AIRCRAFT manufactures Swift two-seater low wing composite aircraft with striking elliptical wings and double curvature surfaces. Comfortable, safe and environmentally sound they are designed and manufactured entirely in the UK, and available globally,

The company also manufactures Swift aircraft gauges specializing in precision-engineered gauges, including Exhaust Gas Temperature (EGT) and Cylinder Head Temperature (CHT) gauges, commonly used in aviation.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Fuel pressure gauges are used in BRP-ROTAX® aircraft engines and offered as certified or non certified parts from their respective manufacturers. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation.

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

Fuel pressure gauges are no longer offered as ROTAX Part Numbers. These part numbers are provided for reference only. For these gauges please refer to our product presentation on AVIASPORT Fuel Pressure Gauges or contact us.

The vertical speed indicator is a precision instrument which provides an accurate indication of rate of change of altitude. UNITED INSTRUMENTS TSO'd (TSO-C8b) 7000 Series vertical speed indicators (VSI) offer several configurations and have been selected as standard equipment by aircraft manufacturers worldwide for use in most production aircraft.. They are temperature compensated and provided with a zero adjustment screw on the face of the case in the seven oclock position. Power: Static system. Size: 3-1/8" x 3-1/8" x 4", Wt. 0.7 lb. Available in unlighted and lighted versions.