ARROW PNEUMATICS offers a complete line of filters, regulators, lubricators, desiccant and sintered bronze products which provide coverage for all markets – PBE, Industrial, Automotive Aftermarket, AG, Heavy Duty, etc. Coverage includes a complete line of desiccant products and air control units, not available through all competitors.

ARROW PNEUMATICS family of Integral Filter-Regulators includes combined filter and regulator units in three different series: Miniature, Intermediate or Standard. Depending on the selected series and product they are offered in different connection sizes (1/4", 3/8" or 1/2" NPT), bowl types (Polycarbonate, Metal with or without sight), drain types (Manual or Overnight) and optional accessories (Gauge, Panel Mount, Gauge & Panel Mount). 

Their specifications can cover a wide range of application requirements. For additional information please refer to the supplied documentation.

FACET® and PUROLATOR® fuel pumps were manufactured and branded by MOTOR COMPONENTS, LLC. They were  compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives and capable of operation with 12/24V electric systems according to the selected model. These pumps have been discontinued although there is still a limited stock availability from stocks in various suppliers. Contact us for prices and availability.

The FACET® GOLD-FLO Solid State fuel pumps were enhanced versions of respective Interrupter models featuring a solid state circuitry and ease of installation and service. When properly installed, they assured a constant, smooth, dependable supply of fuel under pressure  in the hottest weather or in high altitudes eliminating vapor lock. Key product features: State of the art and sealed electronics, self priming and regulating, corrosion resistant (over 100 hours of salt spray), built in anti-siphon valve (positive shut-off), replaceable 74 micron filter, built in magnet to collect metal particles for additional filtration, 12 - 24 inches dry lift, 20 - 45 GPH, 1 - 8 PSI, 1.6 amp average, transient protection (24 volt only), -40 to 180 deg. F operating temperature range, UL/VCA certification, compliance to Mil-std-461D

Although FACET® GOLD-FLO solid state fuel pumps were certified and often used on UL and VCA aircraft, they were not FAA approved and as per their manufacturer statement, they were not designed, tested or manufactured for aircraft applications. Tempest FAA-PMA approved Platinum Electronic Fluid Pumps (separately listed) can be used as Facet Gold-Flo fluid pump replacements in this case. Please refer to the respective correlation chart for additional information.

ATTWOOD SAHARA automatic bilge pumps are self-contained in one compact yet durable low profile bilge pumping package, including pump, wire seals, strainer and mercury-free switch. Their new SAHARA Mk2 pumps replacing older Mk1 models are the only automatic bilge pump that eliminate air-locks with their patented X-Air™ impeller ejecting trapped air in the pump and pipework. They are designed for ultimate reliability and durability in both freshwater and saltwater applications.

SAHARA Mk2 are the easiest automatic bilge pumps to install and service. They can be installed quickly and easily in tight spaces while servicing the pump cartridge from hard-to-reach areas is possible using only one hand. External mounting feet and integrated outlet reduces time and effort. Their universal mounting patterns makes them backwards compatible with the most popular bilge pumps on the market making their replacement simple.

SAHARA Mk2 pumps offer 40% better protection against water ingress and electrolysis vs. their Mk1 counterparts and 2 times better protection than the leading competition. ATTWOOD’s SteadySwitch™ reduces cycling and extends the life of the pump. They are covered with 3-Year Warranty.

SAHARA Mk2 automatic bilge pumps come in 3 models depending on their GPH capacity:

- S500 12V DC with a 500 GPH capacity at open flow, sized for boats up to approximately 17 feet,

- S800 offered in 12V/24V DC configurations with a 800 GPH capacity at open flow, suitable for larger recreational boats,

-  the most powerful and efficient S1200 pumps offered in 12V/24V DC configurations with a 1200 GPH capacity at open flow, suitable for larger boats and yachts.

Service kits for SAHARA Mk2 pumps are also offered.

For additional information please refer to the supplied documentation.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different oil filters and other oil system parts are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

MANN+HUMMEL GmbH is a manufacturer of high-performance, precision-engineered filtration products offered under their globally recognized MANN-FILTER® brand. The MANN-FILTER®  product portfolio includes 6,800 superior original equipment quality filters and automotive aftermarket filters protecting engines, passengers and machines and used in over 300,000 applications.

MANN+HUMMEL PUROLATOR® brand relates to a compehensive range of engine air and oil filters, power steering filters, fuel/water separator filters and cabin air filters. Includes a growing line of heavy-duty filtration products for medium- and heavy-duty applications and can be used on various trucks such as Freightliner, International, Mack, Volvo, Peterbilt, Sterling and Kenworth, Bomag and Atlas Copco compressors, Deutz and Fendt tractors and others.

TRELLEBORG o-rings are widely used seals as they are efficient and economical and can be used in a wide variety of static and dynamic applications to seal practically all liquid and gaseous media.They are available in elastomeric and other materials including (among others) EPDM, FKM and NBR, offered in sizes from 10 mm to 250 mm and suitable for use in operating conditions of -40 °C to 200 °C & 25 MPa max pressure. The o-rings are used predominantly for static sealing applications as a radial static seal, e.g. for bushings,covers,pipes,cylinders,rods or as an axial static seal, e.g. for flanges,plates,caps. Their applications include from repairs or maintenance to quality assured sealing applications in aerospace,automotive or general engineering.Compared with other sealing elements,the TRELLEBORG o-rings have a wide range of advantages:

- Simple,one-piece groove design reduces hardware and design costs

- Compact design allows smaller hardware

- Easy, failsafe installation reduces risk

- Applicable to a wide range of sealing problems: static, dynamic, single- or double-acting

- Wide compound choice for compatibility with most fluids

- Ex-stock availability of many sizes worldwide for easy maintenance and repair

Please refer to the attached Aerospace Part Number Guide.

SAE-AS1034/MS24401/AN821 90° series elbow 90°, flared tube fittings are available as part of our own labelled (AVIATIONEU NEW ERA) product lines in different materials, tube outer diameters and thread sizes in inches.  AN821 and MS24401 series elbow fittings are superseded by the respective elbows of SAE International, standard AS1034 series. These fittings are made from different materials including Carbon Steel, Aluminum Alloy, Corrosion Resistant Steel (CRES), and Titanium Alloy. The 2 digits after the series code indicate the tubing outer diameter (O.D.)  in inches. The following Material Code Letters in the part numbers indicate the composition of the fitting. Finish code “V” in the PN indicates high purity Aluminum coating for “W” or “D” fittings. 

No code letter in part number for Carbon Steel

“D” for Aluminum Alloy (except 7075-T73)

“J” for CRES, type 304

“K” for CRES, type 316

“R” for CRES, type 321

“S” for CRES, type 347

“T” for Titanium Alloy 6AL-4V

“W” for Aluminum Alloy 7075-T73

For example, a 90° elbow fitting with a flared tube 3/8 in. size connection corresponds to PN AS1034D0606 when made from Aluminum Alloy or AS1034W0606 when made from 7075-T73 Aluminum Alloy replacing respective AN821-6D 90° elbow fitting from Anodized Aluminum Alloy with a 37 deg flared tube 3/8 in. connection, and a  UNJF / Class 3A thread of 9/16-18 in. size. AN821 fittings of tube outer diameters  3/4 in. (size 12) and above come with UNJ / Class 3A threads.

Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

Note: In SAE AS standards for new designs, aluminum fittings with material code letter D in their Part or Identifying Number (PIN) are replaced by those with material code letter W for Aluminum Alloy 7075-T73 providing a higher tensile strength. In addition CRES fittings with material code letter S can be used for replacement parts. For new designs use of CRES fittings with material code letter R is recommended for applications requiring higher temperature. 

HONEYWELL AEROSPACE seals are engine parts widely used in aerospace applications. They are also available as FAA-PMA parts from other manufacturers. Supply of the specific parts can be effected either as OEM part numbers or any of respective FAA-PMA  part numbers subject to their availability by our suppliers.

P/N: 2-300-778-01 Fuel Manifold Gasket Seal is used in combustor turbine modules. It is also available as FAA-PMA part with alternative P/N: DEC2-300-778-01 by HEICO AEROSPACE and P/N: NK1004054-10 by EATON CORPORATION. 

HIFI FILTER® offers an extensive and diverse range of standard or tailor-made filters and separators, maintenance kits and accessories for vehicles, machines and processes together with services aiming to be a single supplier of single brand & single part number products replacing multi-brand stocks and providing significant savings  to their customers. 

Today HIFI FILTER® offers filtration & separation solutions covering the needs of diverse sectors from construction, mining & quarrying, agriculture & forestry to parks & roads, marine, handling, on-road, ground support equipment, snow areas, railway, recycling, manufacturing, metals, plastics & rubber, energy, wood industry, construction materials, painting & surface treatment, food and beverages, chemical and industrial processes and textiles.

For more information please refer to the supplied documentation. 

LENZ Model DB desiccant breather filters fall under the company's extensive product portfolio of tank accessories. Made from ABS plastic & impact-modified acrylic LENZ tank breather filters remove corrosive water vapor and they are offered in four standard sizes (3" to 10"). Additional characteristics and features include:

• Operating temp. range: -20˚ F to +200˚ F (-28˚ C to +93˚ C)

• Bi-directional air flow

• Silica gel turns from gold to green when maximum absorption is reached

• Dual filter system with anti-static guard

• Solid contaminant filtration surface area 20.6 in2 (133 cm2)

• Silica gel absorbs up to 40% of its weight in water

• Resistant to alkalis, hydrocarbons, non-oxidizing acids, salt water,and synthetic oils

Available options include:

• Activated charcoal media (consult factory)

• 5 PSI Maximum Operating Pressure

For additional information please refer to the supplied documentation.

AN823 45° Flared Tube & Pipe Thread Elbow Fittings are superseded by those of Military Standard MS20823 and these are superseded in turn by SAE-AS5196 standard. These fittings are  offered as part of AVIATIONEU NEW ERA product lines in steel or aluminum in different tube outer diameters and thread sizes in inches. Aluminum fittings are designated by the letter "D" after the suffix number.

ARROW PNEUMATICS offers a complete line of filters, regulators, lubricators, desiccant and sintered bronze products which provide coverage for all markets – PBE, Industrial, Automotive Aftermarket, AG, Heavy Duty, etc. Coverage includes a complete line of desiccant products and air control units, not available through all competitors.

ARROW PNEUMATICS hydraulic in-line filters provide protection for small, high pressure systems up to 3,000 PSI. 

Using these filters at the pressure side of a pump, foreign particles 25 microns and larger, such as those created by pump wear, are removed before damage can result to the valving in the system. A sintered bronze element ensures protection against crushing should dirt accumulate and increase pressure drop across the element. The unique construction features an anodized aluminum housing for light weight, and a conically shaped sintered bronze element positioned by a retaining spring to allow true, uninterrupted axial flow. Special viton O-rings are available for oil systems where chemical action may be a problem. The standard 25 micron bronze filter element can be easily cleaned or replaced. Nominal filtration ratings of 90, 40, or 10 microns available.

Available in different NPTF sizes.

Maximum operating pressure: 3000 PSI

Operating temperatures: 35 - 200 deg. F

Lenz gauges are an ideal choice for OEM and industrial applications requiring economical dry or liquid filled pressure gauges to monitor system pressures and temperatures.  In addition to their extensive range of dry or liquid filled pressure gauges Lenz product portfolio includes digital pressure gauges, pressure transmitters, and several protection devices such as gauge isolators & snubbers, chemical seals, siphons, and port adapters for their gauges.

LENZ Glycerin-filled pressure gauges can be supplied in Brass (BAC Series) or Stainless Steel (AFC Series)case materials but also with Stainless Steel csse and internals (SS Series). They are all offered with standard bottom or rear center connections and 2.5" and 4" dual P.S.I and Bar dial options with 2.0" option also available for AFC Series. 

Lenz gauges and transducers are well known for their accuracy and reliability and entrusted for demanding applications worldwide. Their key features include:

Dual Face: White coated aluminum face with black coated aluminum pointer.

Completely sealed unbreakable plexiglass lens for long life under the most rugged conditions.

Bourbon Tube from copper alloy up to 800 P.S.I. & safety coiled copper alloy for 800 P.S.I. and higher. For the 4" gauges, their respective bourbon tubes are made of copper alloy up to 1500 P.S.I. & safety coiled alloy steel, 1500 P.S.I. and higher.

In case blow-out plug operation is necessary, the gauge can be serviced in the field for refilling glycerin.

Precision machined and highly finished bearing surfaces of LENZ gauges are practically frictionless providing dependable accuracy. The movement of all internal parts is permanently sealed and dampened by the glycerin fluid. The effects of pulsation and vibration are virtually eliminated. No pointer flutter.

A rubber disc relief valve (Safety Blow-out Plug), located on top of the gauge, vents case pressure build-up at 5 P.S.I. Acts as a filler cap.

A Restrictor assists in dampening, acting much like a pressure snubber.

LENZ gauges are individually packed in rugged corrugated mailer type boxes for protection during shipping or on the shelf.

For additional information please refer to the supplied documentation.

CHALLENGER AVIATION PRODUCTS, Inc. manufactures high quality oil-impregnated, surgical cotton gauze-based aircraft air filters under FAA/PMA certification using K & N filter media. K&N Performance Filters have been well known in the automotive world for years, unsurpassed in airflow and filtering capability they are now one of the most used filters on the road today. Made of a woven cotton fabric instead of paper, the K&N filter medium offers superior filtering without the restriction of airflow presented with paper or foam filters. Fabric allows 50% more air to pass than paper, and almost 60% more than foam. This translates into more horsepower and improved fuel economy.

Based on K&N technology CHALENGER filters have been certified for most general aviation aircraft. Their pleated cotton/wire mesh filters are far less prone to being clogged than synthetic media or paper, and tests done by Challenger (at approximately 240 CFM air flow) show K&N filters typically flow 6.03 CFM as compared to 4.95 for the average pleated paper element and 4.93 CFM for the oil-coated foam variety.

CHALLENGER air filters can be used as replacement parts to other OEM products but an STC (available by CHALLENGER) is required. Air filters come with an application chart, instructions, warranty card and a STC request form which needs to be  filled out for approval for the specific aircraft. The filters comes with a gasket, but do not include the grease which is sold separately, unless otherwise stated.

Product Features:

Can be washed & serviced up to 25 times

Increase horse power 2-4%

Fire Retardant

Save money & improve efficiency

FAA-PMA approved

Ecologically sound

Better take-off and climb-out performance

Faster airspeed and/or better fuel consumption

Accordion fold design provides up to 5 times filtering surface of non-pleated designs

Please refer to the attached documentation on the application of CHALLENGER filters in different aircraft/models.

SAE-AS5406/AN832 series union tube hydraulic fittings are available as part of our own labelled (AVIATIONEU NEW ERA) product lines in different materials, tube outer diameters and thread sizes in inches. The AN832 series fittings are superseded by the respective fittings of  SAE International standard  SAE-AS5406 series. 

Like their SAE-AS5174/MS24392/AN815 union flared tube counterparts, SAE-AS5406/AN832 series fittings are manufactured from Carbon Steel, Aluminum Alloy, Corrosion Resistant Steel (CRES), Titanium Alloy. The 2 digits after the series code indicate the tubing outer diameter (O.D.)  in inches. The following Material Code Letters in the part numbers indicate the composition of the fitting.

No code letter in part number for Carbon Steel

Code letter “D” for Aluminum Alloy (except 7075-T73)

Code letter “J” for CRES, type 304

Code letter “K” for CRES, type 316

Code letter “S” for CRES, type 347

Code letter “T” for Titanium Alloy 6AL-4V

Code letter “W” for Aluminum Alloy 7075-T73

For example, AS5406D06 union fitting is made from Aluminum Alloy with a tubing outer diameter (O.D.) 3/8". The corresponding union fitting in AN832 series would be AN832-6D.

Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

FACET® and PUROLATOR® are both brands of MOTOR COMPONENTS, LLC. a manufacturer of electronic fuel pumps  and filtration products. The company is a global leader in the electronic fuel pump industry. FACET® and PUROLATOR® products are known for their high quality and dependability. 

Starting with fuel filters, FACET® and PUROLATOR® filter range has expanded to include oil filters, hydraulic fluid filters, air filters and water filters to their lineup.  FACET® and PUROLATOR® fuel and other aircraft filters have a pleated design to maximize the filtration surface for faster, more efficient filtration. They carry a  FAA-PMA approval and can be used in a variety of aircraft applications providing reliable, long-lasting and proven to work filtration solutions. Sold in pieces or packs of 10 pieces each. They come with Certificate of Conformance as standard. If additional certification is needed, manufacturer's certification and a FAA Export 8130-3 form can be provided with any qualifying filter item at extral cost.  In this case please select listed products with the extension "CERT" in the product reference code (SKU) from our offered items.

FALLS FILTRATION TECHNOLOGIES Inc. (FFT), formerly AIRMAZE Inc., manufactures a wide variety of highest quality plastic and metal air intake systems and their filter element replacements as well as filtration equipment (such as oil, air/oil separation and hydraulic filters) for the industrial, agricultural, and aerospace industries.

Today FFT filtering products are  typically initially installed or used as retrofits on aircraft, agricultural, railroad, construction, trucking and power industries for a wide range of applications including gas and diesel engine filtration, filters for generators and gas compressors, light, commercial, and military aircraft filters, vacuum pump filters, pressure blowers, and filters for locomotives.

FFT AIRMAZE designed product lines include UNIMAZE small filters, MULTIMAZE industrial air intake filters, breathers, air intake panels, oil bath filters, AUTOMAZE self cleaning air filters, and MUFFLEMAZE noise reducers.

FFT AIRMAZE aircraft & military product lines include strainers used from fuel to lube oil, wash flow filters used primarily in throttle control systems, FAA PMA fuel filters, in-line filters and replaceable filter elements. FFT AIRMAZE AM01W052261 fuel filter assembly is a FAA PMA fuel filter approved for installation in  the Lake Model LA-4-200 airplane, replacing older Bendix 450-OK fuel filter.

For additional information on FALLS FILTRATION TECHNOLOGIES product portfolio please refer to the Product Description section and the supplied documentation. Filter element replacements for FFT filters are offered both as OEM parts or equivalent to / interchangeable with FFT parts from other manufacturers. Please refer to our respective product listings.

Barksdale B1S series are bourdon tube stripped high accuracy pressure switches with a working pressure up to 18,000 psi.

Barksdale's bourdon tube pressure switches offer instrument class accuracy, making them an ideal solution to your pressure control needs when accuracy is critical. Built-in over-travel stops allow for higher proof pressures than most other pressure switch technologies. Setpoints are easily adjusted via an internal adjustment screw. Available in single and dual configurations, Bourdon Tube Pressure Switches are adaptable for use in a wide range of industrial applications. A variety of limit switches is available to allow for a multitude of electrical switching conditions. For applications requiring a highly accurate switch in a highly durable package, Barksdale's bourdon tube pressure switches are the ideal solution.

Offered pressure switches in B1S series are of single setpoint. Connection material is stainless steel and electrical connection is through lead wires.

Product Features:

High accuracy

High pressure up to 18,000 psi

Tamper-proof external adjustment

Single and dual switching capability

Water tight housing versions available (NEMA 4)

Applications:

Oil & gas

Medical applications

Mining

Compressors

Power plants

Water pumps

Hydraulic power units

Pneumatic devices

General industrial applications

O-rings offer effective sealing over wide ranges of pressure, temperature, and movement, with the advantage of sealing pressure in both directions and reducing friction and wear on moving parts. The selection of a specific O-ring is based on a variety of factors, including fluid media resistance, temperature range, hardness, durability, gland size, static or dynamic application, etc. 

Different MIL SPEC and other o-rings in a wide range of materials, Metric or Imperial (inch) sizes, and hardnesses are offered as part of our own (AVIATIONEU NEW ERA) product lines. Those of MS29513 series are made of Nitrile Rubber, the most commonly used rubber material due to its compatibility with most environments, good mechanical properties compared with other elastomers, high wear resistance as well as its relative cost compared to other rubber materials.The MS29513 o-rings are resistant to aircraft fuels (JP-4, JP-5), petroleum-based products over a temperature range of -40°F to +250°F, hydraulic fluids, most silicone fluids but not resistant to automotive fuels, weathering, sunlight and ozone. A small amount of fuel proof grease applied to these o-rings helps the installation and operation of primers. 

Sourced from quality manufactuurers they are supplied in competitively priced packs in different compounds (most commonly Nitrile 70 durometer (70A) and sizes in inches.

DOOSAN GROUP is a global leader in construction, grounds maintenance and material handling equipment, power and water solutions marketed and sold under different world-renowned brands such as DOOSAN®, BOBCAT® construction machines or GEITH® excavator attachments. Genuine OEM parts for DOOSAN GROUP equipment/machines under their BOBCAT® and other brands are offered along with respective replacement parts (including filters. pumps, drive motors, engines, filters, brake components, maintenance kits, and others) manufactured to OEM specifications from third manufacturers.

For more information on parts for DOOSAN GROUP equipment/machines please consult the Product Description section, the supplied documentation or contact us.