BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft. They form part of  BRP-Powertrain GmbH & Co. KG product portfolio which also includes engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles & carts.

The BRP-ROTAX® 915 iS series are turbo charged four cylinder aircraft engines offered in non-certified (915 iSA)  and EASA CS-E certified models (915 iScA). These engines are also offered for 24V power aircraft supply systems. The respective models are  915 iSA C24  (non-certified) and 915 iScA C24 (EASA CS-E certified). These engines are suitable for aircraft equipped with a constant speed propeller or a fixed pitch propeller.

Different options are also available and can be supplied with the engine at additional cost.  They can only be ordered at the time of ordering of the respective engine(s). For additional information please refer to the supplied documentation.

915 iS Series Engine Features:

Performance: 99 kw at 5500 1/min, 104 kw at 5800 1/min (max. 5 min)

four cylinder engine

liquid cooled cylinder heads, air cooled cylinders

integrated reduction gearbox i = 2,54 (915 iSA /915 iScA)

integrated reduction gearbox i = 2,54, version 2 or 3 (915 iSA C24/915 iScA C24)

slipper clutch for reduction gearbox

electric starter + starter relay

engine control unit (ECU)

double elecrtonic system with two voltage regulators

double electronic fuel injection system

turbocharger with electronic controlled wastegate

expansion tank 922668

stainless steel exhaust system

oil filter, oil tank, without tubes

airbox

engine truss assembly (Assy) without silent block

intercooler

aircraft power supply 24V/800W (915 iSA C24/915 iScA C24)

Available Options (supplied with the engine):

air guide baffle installed

2 electrical fuel pumps

silicon water hoses

starter 24V

NOTE: Options are additionally charged and must be specified at the time of ordering. They can only be ordered with the respective engine(s).

This top quality TEXTRON LYCOMING Baffle Spring Compressor speeds up the removal & installation of cylinder baffle springs. It eliminates the danger of broken or bent cylinder fins caused by use of screwdrivers and punches. This tool is easy to use and features two pivot locations for parallel and angle valve cylinders.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different wire harnesses are parts intended for use in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft. They form part of  BRP-Powertrain GmbH & Co. KG product portfolio which also includes engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles & carts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

BRP-ROTAX® 582 MOD. 99 (65 hp) is a two stroke non certified engine for experimental and ultralight aircraft with 300 hrs TBO. This engine is widely used and well accepted in the market for its robustness and easy maintenance.

For additional information please refer to the supplied documentation.

582 MOD. 99 Engine Features:

2 stroke non certified engine with dual independent breakerless, magneto capacitor discharge ignition (CDI) systems

with:

BING carburetor

fuel pump (big)

rewind starter

oil tank for rotary valve drive

exhaust system

integrated water pump

thermostat

hidro vibration damper

Options (supplied with the engines):

Gearbox Version E (with integrated electric starter) P/N:300005262-5003-5347-5004 for 503, 582

suitable for a mass moment of inertia of the propeller up to max 6000 kgcm2

reduction ratio i=2,62/3,0/3,47/4,0

Gearbox Version B P/N:300002258 for 447, 503, 582 (This option is no longer available)

suitable for a mass moment of inertia of the propeller up to max 3000 kgcm2

reduction ratio i=2,58

NOTE: Options are additionally charged and must be specified at the time of ordering. They can only be ordered with the respective engine(s).

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different vacuum pumps are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. The RAPCO FAA/PMA'd vacuum pump, RA215CC  is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. Please refer to the separate product presentation for RAPCO Dry Air Pumps for vacuum or pressure system applications.

Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different screws, such as hexagonal, allen, fixation and others are used in BRP-ROTAX® aircraft engines (please refer to the respective product presentations). They come in various sizes (mostly Metric) and are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

MWfly SPIRIT SKY LINE and RED LINE non certified Aeronautic Engines total 16 high performance models delivering from 100 to 160 horsepower and can be supplied with clockwise or anticlockwise rotation, both in tractor and pushing configurations.. They are 4-cylinder horizontally opposed (boxer type) liquid cooled motors manufactured to the highest standards to meet application requirements in a wide range of LSA and experimental single-engine or twin-engine airplanes and other aircraft (STOL, helicopters, gyrocopters, hang gliders, seaplanes and drones). SPIRIT engines come with many accessories as standard. Please refer to the respective engine presentations and comparison charts. Additional engine accessories for MWfly SPIRIT SKY LINE and RED LINE engines can be purchased separately or included in the order of any SPIRIT engine. For additional information please contact us for customized solutions to your projects.

These washers are for use in Textron Lycoming aircraft engines. Supplied with our own Certificate of Conformance. If additional certification is required, please contact us as a respective charge may apply.

Since its introduction in 1994, the B&C SPECIALITY PRODUCTS BC320 Starter for Continental engines has established an impressive service record as the ONLY starter design on the market that has provided reliable, long-term service for these engines. 

Suitable for installation on Continental engines (C-75, C-85, C-90, C-145-2, O-200, IO-240, O-300-A, -B, and -C, and GO-300-A, -B, and -C) it solves all the problems that other starter designs have had:  worn-out clutches, broken pinions, nagging oil leaks, and catastrophic failure modes. Featuring the durability of all-steel gears and heavy-duty ball-bearings, and the efficiency of a high-torque series-wound motor, it provides greater starting torque, while saving 4.3 to 5.2 lbs. over the old key-type and pull-cable type starters (respectively).

The B&C SPECIALITY PRODUCTS BC320 Starter is STC-PMA approved for use in certificated aircraft, and is available with or without the STC (*). Two installation kits are also available:  one for replacing a key-type starter (Installation Kit 501-1), the other for replacing a pull-cable type starter (Installation Kit 501-3). For key-type starters, before installing the BC320, you will need to remove the needle bearing pressed into the engine case & install the supplied plug in its place. For pull-cable starters, before installing the BC320, you will need to cut off the 9/16 steel shaft that is installed in your engine case.

Other versions of BC320 Starter for 12v and 24v electrical systems (BC320-2, 12v Counter-Rotating or the 24v BC320-3) are also available.

(*) For the issue of the STC, the aircraft make and model, aircraft registration and serial number are required.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Shock mounts and mount sets are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from BRP-ROTAX® but also from other manufacturers.  Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

DYNON AVIONICS is a manufacturer of avionics and aircraft systems for experimental, light sport, and type certificated aircraft. Offered product portfolio includes individual engine sensors and sensor kits for 4 & 6-cylinder Lycoming, Continental, Jabiru & carbureted Rotax engines. Dynon engine sensors and sensor kits are briefly presented in the Product Description section with the appropriate sensors and harnesses provided and can be used with DYNON AVIONICS EMS, FlightDEK and SkyView systems.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different oil and water radiators, intercoolers and other cooling system parts are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

MWfly  SPIRIT RED LINE non-cerified Aeronautic Engines are 4-cylinder horizontally opposed (boxer type) liquid cooled motors manufactured to the highest standards to meet application requirements in a wide range of LSA and experimental single-engine or twin-engine airplanes and other aircraft (STOL, helicopters, gyrocopters, hang gliders, seaplanes and drones). These engines have been designed for maximum performance and can be supplied with clockwise or anticlockwise rotation, both in tractor and pushing configurations. Rotation is designated by the letters "R" or "L" at the engine model code. The rotation must be specified at the time of ordering.

SPIRIT RED LINE different models are offered with direct or geared drive transmissions (depending on the model) and deliver 115, 135 & 160 HP.

MWfly SPIRIT RED LINE engines come with many accessories as standard while additional engine accessories (sold separately) are also available (please refer to the Product Description).

For additional information please refer to the attached engine comparison chart or contact us for customized solutions to your projects.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different screws, such as hexagonal, allen, fixation and others are used in BRP-ROTAX® aircraft engines (please refer to the respective product presentations). They come in various sizes (mostly Metric) and are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

CONTINENTAL AEROSPACE TECHNOLOGIES™ (formerly Teledyne Continental Motors Inc. (TCM) designs and manufactures gasoline and Jet-A engines and related parts.

CONTINENTAL® produces four series (200, 360, 470 & 500) of certified factory new and rebuilt AvGas engines, designed to meet the power and performance requirements of every GA pilot. Ranging from 100 HP to 375 HP, the gasoline engines are built in-house from parts manufactured on site. The Jet-A engines are world-class benchmarks in General Aviation favored by flight schools and specified by major OEMs including Tecnam®, Cessna®, Diamond® , Mooney® , Glasair® , Piper® , and Robin® . These Jet-A fueled engines operate on universally-available aviation fuel kerosene (Jet Fuel, Jet-A and other certified aviation Jet fuels). Each is certified to the requirements of FAA, EASA and a further 78 countries. Continental continues to develop the technologically advanced engine series which now includes engines ranging from 135 HP to 300 HP. Continuous improvements have increased TBO to to 2,100 hours for the CD-135, CD-155, and 2,000 hours for the CD-300 engines. Prime™ Certified Engines are designed specifically for high utilization, ideal for flight schools or fleet operators. Competitively priced they are offered with a power output ranging from 180 to 195 HP. Titan™ Experimental Engines are individually built to customer specifications providing better control over weight, displacement and power output with a choice from 4-cylinder engines in the range of 174–195 HP.

OEM and FAA-PMA parts for CONTINENTAL® are also offered (please see separate product presentation). Please consult the supplied documentation or contact us for additional information and a quotation.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different fuel pumps, filters and other fuel system parts are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

The Viking Non-Certified aircraft engines  are based on used Mitsubishi and Honda automobile engines of recent production removed from cars that are uneconomical to repair. Their models come in multiple horsepower ranges (from 90 hp up to 195 hp). All engines are geared, liquid cooled with a fuel injection system. 

Features of their Honda based engines include liquid cooling, Honda direct gasoline fuel injection system, 4 coil ignition system, lifetime chain camshaft drive, integral exhaust manifold cast into cylinder head, off-set crank shaft and friction reduction coating throughout the engine, variable valve lift and timing, Honda racing technology parts, 40 amp genuine Nippon Denso alternator, custom Mil-spec jacketed wire loom, 3 gear gearbox for Lycoming style propeller rotation and vertical engine orientation, forged, heat treated and ground helical gears, dual overhead camshafts, original Honda tuned intake system, 2.33:1 gearbox ratio.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft. They form part of  BRP-Powertrain GmbH & Co. KG product portfolio which also includes engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles & carts.

Based on the proven concept of the ROTAX® 912 S/ULS engines, the BRP-ROTAX® 912is Sport series of four cylinder aircraft engines are offered as non-certified (912 iS2/912 iS3 models) for use in experimental and ultralight aircraft as well as EASA CS-E certified (912iSc2/912iSc3 models). For the certified models please see the separate product presentation.

The BRP-ROTAX® 912is Sport engine series offer all well known advantages of the ROTAX® 4-stroke engine series complemented by additional features such as the engine management system. The complete package presents the latest technology in the aircraft engine industry and enhances the flying and ownership experience of pilots.  They feature a TBO (time between overhauls) of 2,000 hours. 

The BRP-ROTAX® model 912 iS2 is suitable for aircraft with fixed pitch propeller while model 912 iS3, for constant speed propeller aircraft, is the same as 912 iS2 additionally with drive for hydraulic governor & cover for sealing of governor flange. For additional information please refer to the respective engine presentations and the supplied documentation.

912is /912 iS3 Engine Features:

Performance: 72,0 kw a 5500 1/min, 73,5 kw a 5800 1/min (max 5 min.)

liquid cooled cylinder heads, air-cooled cylinders

integrated reduction gearbox i = 2,43

slipper clutch for reduction gearbox

electric starter + starter relay

engine control unit (ECU)

double electronic system with two voltage regulators

double electronic fuel injection system

expansion tank 922668

exhaust socket in stainless steel

oil filter, oil tank, without tubes

airbox

drive for hydraulic governor (Model 912 iS3)

cover for sealing of governor flange (Model 912 iS3)

2000 hrs TBO

Options (supplied with the engines):

Drive vacuum pump

Air guide baffle P/N 975795 installed

Exhaust system complete installed

2 electrical fuel pumps

engine ring mount

NOTE: Options are additionally charged and must be specified at the time of ordering. They can only be ordered with the respective engine(s).

ROTAX® aircraft engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Airboxes are used in ROTAX® aircraft engines to remove SOME of the difficulties created by having two independent induction systems. They simplify sourcing the air for both carburetors. Depending on the installation, the air temperature and/or pressure within the engine cowling may be significantly different on each side. Airboxes make it easy to run a single intake hose to a point on the aircraft where preferred ambient air can be obtained. They also make the provision of the same carb heat air simpler to each carburetor.

BRP-ROTAX® airboxes and parts are offered as certified or non certified from BRP-ROTAX®.  Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Ignition systems and parts are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from BRP-ROTAX® but also from other manufacturers.  Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.