CURTIS PLT-275AV Flush Valves 6 Holes' Adapter Plates Assembly.

Product Specifications:

Diameter: 2.75 in.

Depth: 640,000-650,000

From Mounting Surface to Bottom Hole Diameter: 1-1/2 in.

Not Certified

Modern reciprocating-engine aircraft (especially large and high-performance ones) use electrically operated auxiliary fuel  boost and transfer pumps  to keep fuel moving toward the aircraft engine or move fuel between tanks to balance aircraft weight. Centrifugal boost pumps,  electric motor driven,  are the most common type and  are used to supply,back up the engine-driven fuel pump or transfer fuel between tanks if the aircraft is so designed. They are  most frequently  submerged in the fuel tank or located just outside of the bottom of the tank with the inlet of the pump extending into the tank. Cartridge/canister or in-tank mounted pumps supply fuel to the aircraft engine while reverse flow through the pump is prevented by check valves. The cartridge/canister design allows removal of the pump cartridge without draining the fuel tank. If the pump is mounted outside the tank, a pump removal valve is typically installed so the pump can be removed without draining the fuel tank.

The RAPCO FAA-PMA approved pumps are offered as direct replacements of the respective pumps by OEMs  such as PARKER AIRBORNE or DUKES (please refer to their separate product presentations). The letters " RA" in the beginning of the RAPCO part number are used to denote the correlation of RAPCO part number to the OEM part number. They incorporate modern design, materials, and manufacturing processes to provide high quality and performance fuel pumps at competitive prices. 

These pumps can be furnished  as NEW or OVERHAUL EXCHANGE, namely new or overhauled pumps in exchange of existing customer owned units (cores). In all exchange cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable serviceable condition. In the case of overhauled pumps, these are overhauled in accordance with FAA-approved process specification and come with a FAA Form 8130-3. All  RAPCO fuel pumps are thoroughly tested for guaranteed pump performance, with a worldwide distribution and a full warranty (same as OEM). For additional information please consult the supplied documentation (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.   

FACET® and PUROLATOR® fuel pumps were manufactured and branded by MOTOR COMPONENTS, LLC. They were  compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives and capable of operation with 12/24V electric systems according to the selected model. These pumps have been discontinued although there is still a limited stock availability from stocks in various suppliers. Contact us for prices and availability.

The FACET® GOLD-FLO Solid State fuel pumps were enhanced versions of respective Interrupter models featuring a solid state circuitry and ease of installation and service. When properly installed, they assured a constant, smooth, dependable supply of fuel under pressure  in the hottest weather or in high altitudes eliminating vapor lock. Key product features: State of the art and sealed electronics, self priming and regulating, corrosion resistant (over 100 hours of salt spray), built in anti-siphon valve (positive shut-off), replaceable 74 micron filter, built in magnet to collect metal particles for additional filtration, 12 - 24 inches dry lift, 20 - 45 GPH, 1 - 8 PSI, 1.6 amp average, transient protection (24 volt only), -40 to 180 deg. F operating temperature range, UL/VCA certification, compliance to Mil-std-461D

Although FACET® GOLD-FLO solid state fuel pumps were certified and often used on UL and VCA aircraft, they were not FAA approved and as per their manufacturer statement, they were not designed, tested or manufactured for aircraft applications. Tempest FAA-PMA approved Platinum Electronic Fluid Pumps (separately listed) can be used as Facet Gold-Flo fluid pump replacements in this case. Please refer to the respective correlation chart for additional information.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different vacuum pumps are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. The RAPCO FAA/PMA'd vacuum pump, RA215CC  is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. Please refer to the separate product presentation for RAPCO Dry Air Pumps for vacuum or pressure system applications.

Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

The RAPCO Dry Air Vacuum/Pressure pumps are are FAA approved quality and performance pumps intended for use as direct replacements of respective models of AIRBORNE and AERO ACCESSORIES (AA) in vacuum or pressure system applications. They are offered as NEW or OVERHAULED.

The NEW RAPCO Air Vacuum/Pressure pumps are FAA-PMA approved and have an inspection port for monitoring vane wear and determine when replacement is needed. An oil seal on the main shaft helps to prevent oil from entering and damaging the pump. Cooling fins reduce operating temperatures and help to extend pump life. They are internally coated with a special Mil-Spec. hard lube coating reducing friction and wear. The carbon rotor has also been improved by chamfering the leading edges of the vane slots reducing failure due to foreign object damage. With every pump, RAPCO includes a mounting gasket and vane measuring caliper. Fittings not included. There is no core charge when purchasing a new RAPCO dry air pump.  Manufacturers warranty on the 200 series is three years / 1300 hours. The warranty period on the 240 and the 400 series is 1 year / 500 hours, which ever comes first. There is no Core Charge on new pumps. 

The OVERHAULED RAPCO pumps are FAA approved and come with an FAA form 8130-3. Mounting gasket included. The warranty period for the 200 series is two years / 1000 hours. The warranty period for the 240 and the 400 series is one year / 400 hours, which ever comes first. Core charge applies. Please refer to the attached documentation for additional information.

The RAPCO Model RA215CC Dry Air Pump is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. This pump replaces the old model 211CC and can also be used in other engines listed below:

Textron Lycoming: O-235, O-290, O-320, O-360, O-435, O-540, IO-320, IO-360, IO-540, IO-720, TIO-360, TIO-540, GO-480, GSO-480

Continental: O-300, GO-300, IO-360, TSIO-360, TSIO-520, GTSIO-520

The RAPCO Model RA215CC-9  replaces the old model 211CC-9. It is the most common model in General Aviation applications using the O-200 engine. This pump can be used with Continental C90-16F, all 0-200 engines and most Lycoming O-320 engines installed on Cessna 150s, 172s, etc.

The RAPCO Model RA216CW replaces the old models 212CW, 216CW and RAPCO P/N RA212CW. This pump can be used with a wide range of aircraft engines including Textron Lycoming LIO-360, GO-435, TIO-541 and Continental E-185, E-225, IO-346, O-470, IO-470, TSIO-470 and IO-520.

This new MERCURY MARINE Mercruiser replacement Trim Pump replaces the older P/N 14336A17 trim pump. Used on MERCURY MARINE Mercruiser Alpha One, Alpha Gen II and Bravo Drive applications. Matched to the larger new style trim cylinders.

The PARKER HANNIFIN electronic plug amplifier VS 111 provides control for proportional pressure, directional, and throttle valves.

The plug amplifier may be mounted directly on the proportional solenoids and secured with a screw. The output of the amplifier supplies DC current for controlling one proportional solenoid.

This current is proportional to the command signal at the input of the amplifier. Through this, together with a proportional valve, an infinitely variable adjustment can be made to the pressure or flow.

Product Features:

• Solenoid control

• Simple installation, direct on valve

• Standard voltage or current signals for command signal inputs

• Capable of PLC control

• Solenoid current independent of temperature

• Solenoid connection 2+PE as per EN 175301-803

• Control connection 6+PE as per DIN 43651

IMPORTANT NOTE: Discontinued Item. Limited Availability from existing stocks in NEW SURPLUS  or USED Conditions.

For additional information please consult the supplied documentation or contact us.

CONCENTRIC HE Series AC/DC power packs allows the selection from a broad range of standard components to design a power system to meet the exact specifications of applications, both vertical and horizontal, with a full range of valving, motor, pump and reservoir combinations and minimum inventory for maximum cost efficiency. Other advantages of the HE power packs includes low power consumption, quiet operation, proven field performance and long service life. Concentric HE2000 Series AC/DC Power HPUs  can be coupled via suitable hydraulic lines to a wide range of operating mechanisms. They normally operate hydraulic cylinders, but can be used with any other hydraulic actuating device. A unit can individually control up to four (4) hydraulic cylinders.

Product Features:

All units have:

12 or 24 VDC motors

Adjustable internal relief valve preset at factory

Load holding check valve

Reservoirs plumbed for horizontal / vertical mount

Various size cylindrical/rectangular reservoirs

9/16˝-18 SAE outlet and return ports (P/N 1303835 1/4˝-18 NPTF ports)

140 x 170 mesh inlet strainer

Please refer to the attached documentation for specifications & additional information.

The PARKER AIRBORNE designs and manufactures motor driven fuel fuel  boost and transfer pumps and is part of the PARKER AEROSPACE GROUP of the PARKER HANNIFIN CORPORATION. These pumps consist standard equipment by the world's leading airframe manufacturers. The PARKER AIRBORNE product range includes:

- In Line fuel pumps for low-flow fuel applications,

- Submerged Centrifugal fuel pumps,

- High Performance Centrifugal fuel pumps for use in turboprop or turbofan jet aircraft,

- Submerged Duplex fuel pumps with two distinct pumping elements

The PARKER AIRBORNE fuel boost pumps use 28 V direct current (DC) to drive a highly efficiency, brushless DC (BLDC) motor or 115.5 V alternating current (AC) three-phase induction motors. The BLDCmotor-driven pumps incorporate integral electronic controllers using Hall Effect sensor rotor-position feedback. The hardware-only controller doe not use any software or programmable logic devices. These pumps feature:

-fuel cooled motor and electronics

-fuel wetted carbon bearings allowing for long-life fluid film design with no rotating shaft seals

-a high efficiency brushless DC (BLDC) motor or a three-phase induction motor

-qualification for high levels of lighting and electromagnetic interference (EMI).

The PARKER AIRBORNE fuel boost pumps can be furnished as either NEW, NEW EXCHANGE or OVERHAUL EXCHANGE. 

Offered pumps in OVERHAUL Condition are supplied in accordance with FAA-approved process specification, come with a FAA Form 8130-3 and can be provided in exchange of existing customer owned units (cores). In all EXCHANGE cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable condition. For additional information please consult the supplied documentation (*) or contact us.

In addition to the PARKER AIRBORNE pumps, RAPCO FAA-PMA approved pumps are also offered as direct replacements  to the respective PARKER AIRBORNE models. The RAPCO replacement pumps can be furnished as either NEW EXCHANGE or OVERHAUL EXCHANGE (please refer to their separate product presentation).

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenance manual, parts catalogue, or equipment list for approved data.

High Pressure Strut Valve with Small Diameter Thread Adapter. Fits in nose gear of certain Cessna models.

Fuel and oil drain valves for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

DONALDSON® COMPANY INC. is one of the largest filtration manufacturers in the world, providing filters and filtration components for a wide range of applications including commercial airliners, military applications and general aviation aircraft, agriculture and forestry, construction, mining,  truck, and bus manufacturers as well as other markets.

DONALDSON® AEROSPACE FILTRATION (AFS) cleaners/degreasers and oils are used in inlet barrier filters to bring the filters back to full capacity after their cleaning process. Offered in 1 US gallon and 5 US gallon sizes. Filter Cleaning Kits are also offered containing 1 US gallon of AFS Oil, 1 gallon of AFS Cleaner/Degreaser, a 16-ounce bottle and spout for re-oiling, a cleaner/degreaser sprayer, and seamer pliers (2-inch and 6-inch).

For additional information please consult the supplied documentation.

ZF FRIEDRICHSHAFEN AG (also known as ZF Group) is a global technology company offering products and systems for vehicle motion control, integrated safety, automated driving, and electric mobility. The product portfolio is continuously enhanced and adapted to the market conditions and safety requirements. ZF products and systems ae extensively used in passenger cars, commercial vehicles as well as in various other sectors such as defense and aviation industries, construction and agricultural machinery, wind power, marine propulsion, rail drives and test systems. ZF Aftermarket is world's leading supplier in the automotive and industrial aftermarket, offering an exceptional product range of OE quality spare parts and services.

ZF has decades of experience in the design and development of marine propulsion systems. The company offers complete driveline systems as well as components for all types of vessels – motor yachts, watersports boats, high-speed ferries, workboats and commercial vessels, in a power range from 10 to 12,000 kW. The product portfolio includes a comprehensive range of transmissions (reversing, non-reversing and hybrid), propellers, steering systems and CAN-bus-compatible electronic control systems, azimuth thrusters, tunnel thrusters and sail drives. ZF spin-on transmission gearbox oil filters are used in different series of ZF Marine Propulsion Systems. With high quality, intelligent design concepts and individual service, ZF guarantees minimum downtimes and low life cycle costs. Customer range for these systems include shipyards, ship owners and operators as well as engine manufacturers worldwide. 

For additional information please consult the supplied documentation.

The ACS unvented flush fuel cap operates with a lift and turn lever. This cap has a 3" opening for easy refueling. Cap & adapter ring are anodized "clear" for corrosion resistance. Cap is fastened to adapter ring with safety chain.

ARROW PNEUMATICS offers a complete line of filters, regulators, lubricators, desiccant and sintered bronze products which provide coverage for all markets – PBE, Industrial, Automotive Aftermarket, AG, Heavy Duty, etc. Coverage includes a complete line of desiccant products and air control units, not available through all competitors.

ARROW PNEUMATICS family of Integral Filter-Regulators includes combined filter and regulator units in three different series: Miniature, Intermediate or Standard. Depending on the selected series and product they are offered in different connection sizes (1/4", 3/8" or 1/2" NPT), bowl types (Polycarbonate, Metal with or without sight), drain types (Manual or Overnight) and optional accessories (Gauge, Panel Mount, Gauge & Panel Mount). 

Their specifications can cover a wide range of application requirements. For additional information please refer to the supplied documentation.

Made from 14L 12 steel and cadmium plated, SAF-AIR FAA-PMA approved push type fuel drain valves are close tolerance valves of simple design. These valves provide the most trouble free operation of any other line of valves in the industry. SAF-AIR valves are manufactured with an o-ring placed on the stem to seal against a flat seat on the body. This design eliminates an area where dirt can gather, thus putting an end to the main cause of fuel drain valve drip. Available in eight models in two styles with or without 1/4" hose adapter.

Check valves are used in aircraft fuel, hydraulic and pneumatic systems to prevent the backflow of process media. MS28885 series fuel check valves come under different part numbers depending on their respective producers and used in aircraft made by different airframe manufacturers.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different oil filters and other oil system parts are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.For more information on SWAGELOK® products please refer to the supplied documentation.

FILLER NECK CF507A Vintage/Classic Style Fuel Cap fits 3" O.D. Filler Necks (Vented).