LENZ externally-mounted tank hydraulic suction line strainers are offered in different NPT and SAE series below to cover the needs of a range of applications.They do not require access to the tank interior for ease of servicing and feature perforated steel support tubes, cast iron bushings and 100 mesh stainless steel pleated screens as standard.

Part Numbers include subsections for the Series, the Size, the By-pass Option and the Mesh Oprion of the strainer.

Versions with by-pass options are designated by "-R" and PSI number after the size number of the strainer (e.g. -R3 and -R5 for 3 or 5 PSI by-pass options respectively).

Versions with mesh options, other than 100 mesh stainless steel pleated screen, are indicated by "-" and the number of the mesh option (i.e. -30, -60, -200  for 30, 60 or 200 mesh respectively).

LTF series are male NPT (MNPT) tank strainers designed for flows up to 50 GPM (200 LPM), with 2" X 2" MNPT steel nut. Offered with No by-pass or 5 PSI by-pass and 30, 60 and 200 mesh  options.

LTM series are male NPT (MNPT) to female NPT (FNPT) tank strainers designed for flows up to 200 GPM (750 LPM) with cast iron nut (stainless nut as option). Offered with No by-pass, 3 or 5 PSI by-pass and custom mesh  options.

LTMA series are male SAE (MSAE) to female SAE (FSAE) tank strainers designed for flows up to  40 GPM (160 LPM). They come with Buna o-rings and steel zinc plated bushings. Offered with No by-pass , 3 or 5 PSI by-pass and 30, 60 and 200 mesh  options.

LTMAB series are male SAE (MSAE) to hose barbed tube externally-mounted tank strainers designed for flows up to 40 GPM (160 LPM). They come with 1" to 2" hose beads, Buna o-rings and forged Zinc plated fittings.  Offered with No by-pass, 3 or 5 PSI by-pass and 30, 60 and 200 mesh  options.

For additional information please refer to the supplied documentation.

Switches for different functions, inteneded for use in Piper aircraft. Information on their applicability to different Piper aircraft models and serial numbers is included. For additional information and/or non listed switches please contact us.

The RAPCO Dry Air Vacuum/Pressure pumps are are FAA approved quality and performance pumps intended for use as direct replacements of respective models of AIRBORNE and AERO ACCESSORIES (AA) in vacuum or pressure system applications. They are offered as NEW or OVERHAULED.

The NEW RAPCO Air Vacuum/Pressure pumps are FAA-PMA approved and have an inspection port for monitoring vane wear and determine when replacement is needed. An oil seal on the main shaft helps to prevent oil from entering and damaging the pump. Cooling fins reduce operating temperatures and help to extend pump life. They are internally coated with a special Mil-Spec. hard lube coating reducing friction and wear. The carbon rotor has also been improved by chamfering the leading edges of the vane slots reducing failure due to foreign object damage. With every pump, RAPCO includes a mounting gasket and vane measuring caliper. Fittings not included. There is no core charge when purchasing a new RAPCO dry air pump.  Manufacturers warranty on the 200 series is three years / 1300 hours. The warranty period on the 240 and the 400 series is 1 year / 500 hours, which ever comes first. There is no Core Charge on new pumps. 

The OVERHAULED RAPCO pumps are FAA approved and come with an FAA form 8130-3. Mounting gasket included. The warranty period for the 200 series is two years / 1000 hours. The warranty period for the 240 and the 400 series is one year / 400 hours, which ever comes first. Core charge applies. Please refer to the attached documentation for additional information.

The RAPCO Model RA215CC Dry Air Pump is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. This pump replaces the old model 211CC and can also be used in other engines listed below:

Textron Lycoming: O-235, O-290, O-320, O-360, O-435, O-540, IO-320, IO-360, IO-540, IO-720, TIO-360, TIO-540, GO-480, GSO-480

Continental: O-300, GO-300, IO-360, TSIO-360, TSIO-520, GTSIO-520

The RAPCO Model RA215CC-9  replaces the old model 211CC-9. It is the most common model in General Aviation applications using the O-200 engine. This pump can be used with Continental C90-16F, all 0-200 engines and most Lycoming O-320 engines installed on Cessna 150s, 172s, etc.

The RAPCO Model RA216CW replaces the old models 212CW, 216CW and RAPCO P/N RA212CW. This pump can be used with a wide range of aircraft engines including Textron Lycoming LIO-360, GO-435, TIO-541 and Continental E-185, E-225, IO-346, O-470, IO-470, TSIO-470 and IO-520.

The EATON AEROQUIP FC300 are AQP elastomer hoses with a blue, abrasion-resistant fabric cover with single wire braid reinforcement over a synthetic rubber inner tube for longer life. The FC300 hoses are designed for high pressure fluid applications such as power steering, hydraulics, air, fuel, lubricating oils, fire resistant hydraulic fluids and other industrial fluids. They are also suitable for biodiesel use up to B20 and max temperature of 212°F (100°C). Available in different internal diameters in inches and for use in different maximum operating pressures (psi). Priced and sold by the foot.

Indicative Applications:

Power steering lines

Hydraulics

Air

Gasoline

Fuel

Lubricating oils

Over the wall air tool

Dot-approved air brake

Max operating pressure is 2250 psi

Operating Temperature Range

-55°F to +302°F (-49°C to +150°C)

Air not to exceed +250°F [+121°C]

Notes: 

(1) The FC300 Hose only works with FC300 steel fittings (to be ordered separately). Easily assembles with a bench vise and/or wrenches.

(2) FC300-32 and FC300-40 hoses DO NOT meet SAE 100R5 pressure with reusable fittings. FC300-32 is rated to 350 psi with crimp fittings. 

The SPRL fuel locking and non-locking caps have secure sealing and easy finger tip operation. These caps are made from the highest quality modern engineering plastics with Viton o ring seals (which can be easily replaced). The mounting rings are anodized aluminum with the flange recessed to give a perfect flush fit whether it is riveted under a metal skin, as in the RV series, or built into a composite structure. The SPRL caps are non vented and recommended to keep the fuel in, the water out and in the locking version, other unwanted items out of your tank. 

SPRL-L (locking) and SPRL-S (non-locking) fuel  caps have an 65 mm O.D. and can be used on Europa, Compair, Glasair, Lancair, Murphy, OMF, Rocket, Velocity, Zenith and many more experimental aircraft. Wt: 80 grams.

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered by Andair (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions to ensure the right fuel tank selection. Can be supplied with different fittings. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

Designed for use with Light Sport and Ultralight aircraft, FS16 series 1/4" fuel selectors come in the following types:

Type 1 (FS16x1): simple 1/4” ON/OFF shut off valve with 90 degrees action between the two positions. On the FS16x1 there are two ports and either port can be used as the inlet or outlet.

Type 2 (FS16x2): Three way 1/4” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 4 (FS16x4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.On the FS16x4 there are 3 ports. The lower port is the outlet to the engine is 1/8 NPT Female. The inlet, side ports are 1/8 NPT Female and are at the 9 o'clock and 12 o'clock positions when looking at the valve with the brass ball spindle pointing upwards. At the 3 o'clock position there is a blanking plate that covers up a PTFE gland opposing the forces of the other 2 PTFE glands.

Type 2 and Type 4 valves do not allow cross feed between each tank when the selector is in the OFF position.

For additional information please refer to the product presentations, the supplied documentation or contact us.

DONALDSON® COMPANY INC. is one of the largest filtration manufacturers in the world, providing filters and filtration components for a wide range of applications including commercial airliners, military applications and general aviation aircraft, agriculture and forestry, construction, mining,  truck, and bus manufacturers as well as other markets.

DONALDSON® AEROSPACE FILTRATION (AFS) cleaners/degreasers and oils are used in inlet barrier filters to bring the filters back to full capacity after their cleaning process. Offered in 1 US gallon and 5 US gallon sizes. Filter Cleaning Kits are also offered containing 1 US gallon of AFS Oil, 1 gallon of AFS Cleaner/Degreaser, a 16-ounce bottle and spout for re-oiling, a cleaner/degreaser sprayer, and seamer pliers (2-inch and 6-inch).

For additional information please consult the supplied documentation.

Made from 14L 12 steel and cadmium plated, SAF-AIR FAA-PMA approved push type fuel drain valves are close tolerance valves of simple design. These valves provide the most trouble free operation of any other line of valves in the industry. SAF-AIR valves are manufactured with an o-ring placed on the stem to seal against a flat seat on the body. This design eliminates an area where dirt can gather, thus putting an end to the main cause of fuel drain valve drip. Available in eight models in two styles with or without 1/4" hose adapter.

LEAR ROMEC is a brand of CRANE AEROSPACE & ELECTRONICS for fluid management solutions in aircraft, gas turbine engines and radar cooling systems. The LEAR ROMEC products are suitable for applications in the commercial transport, general aviation, business, regional jet and ground based gas turbine markets.

CRANE AEROSPACE & ELECTRONICS is a world leader in the design and manufacture of high performance, technology, accuracy, and reliability positive displacement pumps, centrifugal pumps and true mass flowmeters, under the company's ELDEC, HYDRO-AIRE and LEAR ROMEC brands, which are used in aerospace and defense applications.

Product lines include:

- Vane type positive displacement lube & scavenge pumps featuring high reliability and volumetric/mechanical efficiency, excellent flow performance at high altitude/low inlet pressures, excellent priming performance, lowest weight option for high flow pumps (such as Geared Turbofan) and high contamination wear resistance,

- Fuel Flow Transmitters (FFT) for aircraft engines featuring a +/-0.5% accuracy performance of flow point in the engine cruise range, form factor and flow conditioning for difficult installations,

- Centrifugal pumps for fuel, water and coolant applications of different drive types including gearbox driven, hydraulic motor driven, 400 Hz fixed frequency AC, 28 VDC brush and brushless, and 270 VDC brushless. Like the lube & scavenge pumps, these pumps are characterised by high reliability and volumetric/mechanical efficiency, priming performance and contamination wear resistance.

LEAR ROMEC customer owned fuel pumps can be overhauled or offered in overhaul/exchange condition for immediate shipment. In case of no core returns, core charges apply. Please see below an indicative list of available LEAR ROMEC fuel pumps for overhaul/ exchange or contact us for additional information.

LEAR ROMEC Part Numbers: 

RG15980 | RG15980P 

RG17980 | RG17980A | RG17980A/M | RG17980/M | RG17980D | RG17980D/M | RG17980E | RG17980E/M | RG17980J | RG17980J/M | RG17980K | RG17980K/M | RG17980P | RG17980P/M | RG17980U | RG17980U/M

RG9080F1 | RG9080F1/M | RG9080F2 | RG9080F2/M | RG9080G1 | RG9080G1/M | RG9080G2 | RG9080G2/M| RG9080H1 | RG9080H1/M | RG9080H2/M | RG9080J1 | RG9080J1/M | RG9080J4A | RG9080J4A/M | RG9080J6A | RG9080J6A/M | RG9080J7A | RG9080J7A/M | RG9080J8A | RG9080J8A/M

RG9570K1 | RG9570K1/M | RG9570K2 | RG9570K2/M | RG9570K3 | RG9570K3/M | RG9570K4 | RG9570K4/M | RG9570P1 | RG9570P1/M

RAPCO manufactures FAA-PMA approved pneumatic filter replacements for airborne assemblies. RAPCO filters are constructed to the highest industry standards. They utilize a 0.3 micron filtration media which provides superior filtration without undue air flow restriction. They help proper filtration of destructive contamination within an aircraft environment (such as system dirt and dust from the cabin and cigarette smoke) which often lead to the need for replacement of expensive gyro instruments & other components.  When changed on a scheduled basis they can reduce operating costs. 

RAPCO FAA-PMA approved RA-B3-5-1 Garter Filter Element is a filter replacement part for use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Product Specifications:

Garter Filter Element

Polyurethane foam, 1” long x 1-3/4” diam. 

For use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Recommended Replacement: 100 hours/ 1 year

RAPCO FAA-PMA approved D-9-18-1 Central Air Filter Element replacement is intended for use with Airborne 1J7-1 filter assembles, for vacuum systems. 

Product Specifications:

Central Air Filter Element.

Pleated filter, screen with bonded rubber end seals. 

3-1/4” long x 2-7/8 diam. 

For use with Airborne 1J7-1 filter assembles, for vacuum systems

Recommended Replacement: 500 hours/ 1 year

Note: 

The products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case. Additional charges may apply.

Modern reciprocating-engine aircraft (especially large and high-performance ones) use electrically operated auxiliary fuel  boost and transfer pumps  to keep fuel moving toward the aircraft engine or move fuel between tanks to balance aircraft weight. Centrifugal boost pumps,  electric motor driven,  are the most common type and  are used to supply,back up the engine-driven fuel pump or transfer fuel between tanks if the aircraft is so designed. They are  most frequently  submerged in the fuel tank or located just outside of the bottom of the tank with the inlet of the pump extending into the tank. Cartridge/canister or in-tank mounted pumps supply fuel to the aircraft engine while reverse flow through the pump is prevented by check valves. The cartridge/canister design allows removal of the pump cartridge without draining the fuel tank. If the pump is mounted outside the tank, a pump removal valve is typically installed so the pump can be removed without draining the fuel tank.

The RAPCO FAA-PMA approved pumps are offered as direct replacements of the respective pumps by OEMs  such as PARKER AIRBORNE or DUKES (please refer to their separate product presentations). The letters " RA" in the beginning of the RAPCO part number are used to denote the correlation of RAPCO part number to the OEM part number. They incorporate modern design, materials, and manufacturing processes to provide high quality and performance fuel pumps at competitive prices. 

These pumps can be furnished  as NEW or OVERHAUL EXCHANGE, namely new or overhauled pumps in exchange of existing customer owned units (cores). In all exchange cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable serviceable condition. In the case of overhauled pumps, these are overhauled in accordance with FAA-approved process specification and come with a FAA Form 8130-3. All  RAPCO fuel pumps are thoroughly tested for guaranteed pump performance, with a worldwide distribution and a full warranty (same as OEM). For additional information please consult the supplied documentation (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.   

The PARKER AIRBORNE designs and manufactures motor driven fuel fuel  boost and transfer pumps and is part of the PARKER AEROSPACE GROUP of the PARKER HANNIFIN CORPORATION. These pumps consist standard equipment by the world's leading airframe manufacturers. The PARKER AIRBORNE product range includes:

- In Line fuel pumps for low-flow fuel applications,

- Submerged Centrifugal fuel pumps,

- High Performance Centrifugal fuel pumps for use in turboprop or turbofan jet aircraft,

- Submerged Duplex fuel pumps with two distinct pumping elements

The PARKER AIRBORNE fuel boost pumps use 28 V direct current (DC) to drive a highly efficiency, brushless DC (BLDC) motor or 115.5 V alternating current (AC) three-phase induction motors. The BLDCmotor-driven pumps incorporate integral electronic controllers using Hall Effect sensor rotor-position feedback. The hardware-only controller doe not use any software or programmable logic devices. These pumps feature:

-fuel cooled motor and electronics

-fuel wetted carbon bearings allowing for long-life fluid film design with no rotating shaft seals

-a high efficiency brushless DC (BLDC) motor or a three-phase induction motor

-qualification for high levels of lighting and electromagnetic interference (EMI).

The PARKER AIRBORNE fuel boost pumps can be furnished as either NEW, NEW EXCHANGE or OVERHAUL EXCHANGE. 

Offered pumps in OVERHAUL Condition are supplied in accordance with FAA-approved process specification, come with a FAA Form 8130-3 and can be provided in exchange of existing customer owned units (cores). In all EXCHANGE cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable condition. For additional information please consult the supplied documentation (*) or contact us.

In addition to the PARKER AIRBORNE pumps, RAPCO FAA-PMA approved pumps are also offered as direct replacements  to the respective PARKER AIRBORNE models. The RAPCO replacement pumps can be furnished as either NEW EXCHANGE or OVERHAUL EXCHANGE (please refer to their separate product presentation).

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenance manual, parts catalogue, or equipment list for approved data.

ATTWOOD SAHARA automatic bilge pumps are self-contained in one compact yet durable low profile bilge pumping package, including pump, wire seals, strainer and mercury-free switch. Their new SAHARA Mk2 pumps replacing older Mk1 models are the only automatic bilge pump that eliminate air-locks with their patented X-Air™ impeller ejecting trapped air in the pump and pipework. They are designed for ultimate reliability and durability in both freshwater and saltwater applications.

SAHARA Mk2 are the easiest automatic bilge pumps to install and service. They can be installed quickly and easily in tight spaces while servicing the pump cartridge from hard-to-reach areas is possible using only one hand. External mounting feet and integrated outlet reduces time and effort. Their universal mounting patterns makes them backwards compatible with the most popular bilge pumps on the market making their replacement simple.

SAHARA Mk2 pumps offer 40% better protection against water ingress and electrolysis vs. their Mk1 counterparts and 2 times better protection than the leading competition. ATTWOOD’s SteadySwitch™ reduces cycling and extends the life of the pump. They are covered with 3-Year Warranty.

SAHARA Mk2 automatic bilge pumps come in 3 models depending on their GPH capacity:

- S500 12V DC with a 500 GPH capacity at open flow, sized for boats up to approximately 17 feet,

- S800 offered in 12V/24V DC configurations with a 800 GPH capacity at open flow, suitable for larger recreational boats,

-  the most powerful and efficient S1200 pumps offered in 12V/24V DC configurations with a 1200 GPH capacity at open flow, suitable for larger boats and yachts.

Service kits for SAHARA Mk2 pumps are also offered.

For additional information please refer to the supplied documentation.

An oil pressure sensor is a device used to measure the oil pressure on an engine. The term oil pressure sensor is often used to denote  at least two different and distinct types of sensor - an oil pressure switch and and oil pressure sender.

An oil pressure switch is an egine protection device. It is a mechanical device that has a switch inside. The oil pressure switch may be 1, 2, or 3 insulated terminals (pins). Traditionally most oil switches for protection close when they activate, to show low oil pressure. 

An oil pressure sender is a device that senses the oil pressure of an engine and transmits it to the engine or machine controller. It is used as a generator protection device, to display the oil pressure to a user or for logging and diagnostic purposes. Unlike an oil pressure switch, it can display a range of readings.

Oil pressure sensors are used aircrafts and offered either as parts from the respective OEMs or as replacement parts from third parties. They are alternatively termed as HOBBS switches.

Please refer to the manufacturer Illustrated Part Cataloge (IPC) or the technical specifications of offered sensiors to select the right sensor for your application.

FALLS FILTRATION TECHNOLOGIES (formerly AIRMAZE) manufactures a wide variety of filters for the industrial and aerospace industries. The AIRMAZE AM01W052261 fuel filter assembly is a FAA PMA fuel filter approved for installation in  the Lake Model LA-4-200 airplane, replacing older Bendix 450-OK fuel filter.

FILPRO CORPORATION manufactures a wide range of high quality industrial filter parts intended for use as replacements to respective OEM products meeting or exceeding their specifications. All FILPRO offered filters are direct replacements in form, fit and function for the respective reference numbers of  OEM products. The company is also a distributor of OEM brands covering  air, liquid and gas filtration needs.

Offered FILPRO product portfolio includes Air Filters, Compressor & Vacuum Pump Filters, Hydraulic & Oil Filters, Dust Collector Filters, Liquid Filter Cartridges, Liquid Filter Bags, Spilltech Sorbents as well as Custom Filter Designs. FILPRO filtration products are used worldwide by OEM’s and end users in virtually every industrial application. Some of the major industries served include: Agriculture, Air Conditioning, Automotive, Government, Aviation,  Defense, Chemical Processing, Conveying, Food and Beverage Processing, HVAC, Hydraulics, Industrial Gas Production Irrigation, Medical, Metal Processing Packaging, Paint Processing, Petroleum, Pharmaceuticals, Plastics, Pneumatic, Printing, Pulp & Paper, Refrigeration, Tool & Machine, Transportation, Utilities, Vacuum Cleaner, Water Purification & Wastewater Treatment. For additional information on FILPRO filters please consult the supplied documentation or contact us.

Honeywell is a leading switch and sensor provider for many HVAC applications, including airflow, VAV control, boiler/chillers, motors, and more.  Products include pressure sensors, digital humidity/temperature sensors, magnetic position sensor ICs, current sensors, pressure switches, basic switches, and more.

Honeywell's MICRO SWITCH switches fill many roles in a wide range of applications, including presence/absence/positioning, inspection/recognition, condition measurement, and operator/machine interface. They range from sealed switches used in high temperature aerospace applications to large cable-pull switches ensuring safety on conveyors.

Honeywell's snap-action basic switches are simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions. 

Honeywell's  Standard families of Basic and Miniature switches include V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.

The Premium families of MICRO SWITCH Large and Subminiature switches are designed for high-precision applications where the cost of a switch failing is high maintaining enhanced accuracy and repeatability. MICRO SWITCH premium basic switches are offered in different series, they feature precise and accurate characteristics. Available in large, miniature, and subminiature switch sizes, MICRO SWITCH premium basics are customizable to provide unique actuators, different terminal combinations, custom characteristics, and even value-added wires… to meet customers’ application requirements. With many Honeywell premium basics, they are tested and certified to a higher cycle count.

Check valves are used in aircraft fuel, hydraulic and pneumatic systems to prevent the backflow of process media. MS28885 series fuel check valves come under different part numbers depending on their respective producers and used in aircraft made by different airframe manufacturers.

DONALDSON® is a leading world-wide filter supplier for commercial jets, military vehicles, off-road equipment, trucks, light-duty vehicles, power plants, dust collectors, industrial compressors and more. The company is the OEM for  FAA-PMA air filters installed in Cessna (all SE piston models), Piper (turbo charged aircraft), Beechcraft,  Maule & Mooney aircraft delivering consistent and reliable performance.

Product Features:

Selection: Over 75 filter models for Cessna, Beech, Maule, Mooney, Piper and other aircraft.

Easy Installation & Maintenance: No removable parts or oil, may be washed with water.

Better Airflow:  In laboratory airflow tests comparing DONALDSON®, Bracket and Challenger Aviation (K&N) filters for Cessna 172 aircraft, DONALDSON® had the lowest restriction (best airflow). The reasons for this include:

• Filter media is composed of synthetic fibers

• Evenly distributed uniform size and shape media fibers

• More media area and less frame

• Deeper filter pleats

• No oil

Stop more dirt and protect the engine better: They achieve 98.5% or greater filtration efficiency according to ISO5011 fine and coarse dust requirements, greatly exceeding the other filters. 

Long Lasting: rated to last 500 hours, five to 10 times longer than foam filters. Replacement after three years, five cleanings or 500 flight hours, whichever occurs first.

OEM and FAA-PMA Certified: Designed to manufacturer specifications, DONALDSON® filters don not require STCs .

Thoroughly Tested: Third party lab tests show Donaldson filters meet or exceed FAA fire safety regulation per FAR 25.853 and FAR 23.1107 Induction system filters.

Please refer to the attached documentation on the application of DONALDSON® filters in different aircraft/models.

MONARCH D.C. Hydraulic Power Systems are offered in standard M-200, M-300 and M-3500 model series featuring a wide selection of power unit sizes and performance to satisfy most O.E.M. applications, hardcoated pump end plates for unmatched durability in demanding environments and severe duty applications and externally adjustable relief valve with lock nut. Over two million of M series pumps have been sold and used in a variety of applications, including: dump bed kits, dump trailers, auto hauler trailers, compactors, scissor lifts, security gates, lift gates, tow trucks, snow plows, hay bale spikes, handicap ramps/lifts, motorhome slideouts, custom projects, etc. Please refer to the attached documentation for specifications & additional information on offered hydraulic power systems.