FILLER NECK offers a variety of cap neck styles and materials which can support oil, fuel, hydraulic or water applications. Accessory options can be used to build the filler assembly you need. Three different strainers provide varying degrees of filtration for 300 Series caps and necks to help maintain clean fluids within the engine system. Special mountings match the type of connections required.

McFARLANE® AVIATION MS27975-1 fork rod end is internally threaded 1/4"-28 to fit threaded 1/4" diameter rod. Manufactured from 4130 steel. Used for engine controls.

NEWTON CONSULTING offers a range of SPRL branded fuel valves featuring distinct features that make them better than the rest. Ceramic disks have no soft moving/rubbing seals to wear out, unlike other valves but also give an 'indefinite' life with a very smooth light action. The lift and turn selector of SPRL valves is instinctive, secure, and easier to use than the complex 'lift button' type. The locking detents avoid accidental movements. The fixings match most installations, and the internal ports prevent cross feeds, unless 'selected to 'Both'. Their lightweight alloy construction is anodized for protection while the Viton O-ring seals are suitable for all current fuels. Male AN fittings enable plumbing straight into the aeroplane system with no extra fittings required.

The SPRL Valves, as designed, have a very nice 'feel' and are logical in use, however, there is a requirement in FAR 23 whereby the fuel valve must be turned from OFF to an ON selection simply by turning it, i.e. it should not have to be lifted up, pushed down etc, and it should also not be possible to turn it from an ON position to OFF without a dent.

Fittings must be purchased separately. Please refer to the separate NEWTON fittings product presentation.

Sourced from quality producers, AVIATIONEU NEW ERA general purpose brass check valves with nylon cover are suitable for use in hydraulic, heating, air conditioning and pneumatic installations in vertical, horizontal or oblique positions. They are manufactured in accordance with ISO 228 standard and they are available in different sizes. Sold in pieces.

ZEFTRONICS Voltage Regulator with ground fault protection, trouble shooting light, black plastic connector & 16V over voltage protection built in.

Aircraft Replacement Landing & Taxi Light Lamps sourced from different manufacturers. GE Lighting has been acquired by Tungsram. All bulbs are identical, but packaging may differ at the time of shipment.

Pitot tubes scan the static and dynamic pressure, and they are used on aircraft to determine the aircraft airspeed. FALCON Non TSO'd (non-certified) pitot tubes have been used for many years on different types of experimental or other aircraft where no certification is required. Available in different heated and unheated versions for 12 or 24 V electical supplies, for vertical or flat installations. Standard (3/4") and long (4") mounting brackets are offered. Heated Material: Stainless Steel. Please consult the supplied documentation or contact us for further information.

SKY-TEC, a HARTZELL ENGINE TECHNOLOGIES brand, includes starters and support for Prestolite, Electrosystems, Lamar and Kelly designs. SKY-TEC OEM contactors are today installed in many general aviation aircraft while SKY-TEC FAA-PMA contractors can be used for starter, battery master/auxiliary or auxiliary power applications in replacement of OEM parts.

SKY-TEC STS-S Series FAA-PMA certified aircraft starter solenoids (aka relays) are intermittent duty suitable for starter applications. They are available in 12V (STS-S12) or 24V (STS-S24) versions. Activation: +V to S-Terminal (Frame is grounded by mounting).

SKY-TEC STS-M Series FAA-PMA approved Battery/Master solenoids are continuous duty solenoids intended for use in battery master/auxiliary applications in certified aircraft. They are available in 12V (STS-M12) or 24V (STS-M24) versions. Activation: -(Ground) to S-Terminal. (Floating ground frame).

SKY-TEC STS-A Series FAA-PMA approved solenoids are continuous duty and typically used for connecting auxiliary (ground) power. They are available in 12V (STS-A12) or 24V (STS-A24) versions. Activation: varies.

Product Features:

FAA-PMA Certified

All-metal case construction

Silver contacts (vs. copper) for high-current capability and long-life. They provide 300A in-rush capability. Much higher than the original units.

Strong spring and high-current coil for quick contact opening - minimizing arcing

Single coil terminal (other end connected to case)

High quality manufacturing 

Upgraded to perform best with today's lightweight, high torque starters

Same OE terminal layout simple to install

For additional information on different SKY-TEC series of slenoids and their applications in different aircraft please refer to the respective product presentations.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different starter relay assemblies are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

Bi-metallic push to reset only thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 30 amp ratings. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Push To Reset Only

0.5 amp to 30 amp ratings.

Cannot be manually tripped.

Button extends for visual trip indication.

Push button to reset breaker.

90 Degree Screw-On Terminals

The HEIM® BEARINGS company has been acquired by RBC® BEARINGS, a leader in the world of highly engineered bearing products. 

HEIM® BEARINGS produces the industry's widest range of rod end bearing sizes (aka rod ends) in  the following four grades (types): precision, aircraft, military and commercial with each grade including different series suitable for respective application requirements. HEIM® BEARINGS are made from different materials featuring among others high strength two piece designs, high capacity designs, self-lubricating options and thermoplastic races or Teflon® liners. Please consult the supplied table on different grades and series offered.

- Precision rod ends are manufactured to tight tolerances for applications requiring improved linkage accuracy and reduced looseness. 

- Aircraft rod ends use premium materials, and have magnafluxed rod end bodies. Originally intended for aircraft applications, aircraft rod ends are used in many industrial applications where a high degree of reliability is required

- Military rod ends are produced in strict accordance with all applicable military specifications and are typically used in military and commercial aviation applications, or when Mil-Spec approval is required

- Commercial rod ends are produced using standard materials and manufacturing methods, and consist an economical choice for industrial applications

The HEIM® BEARINGS M M & F M  series are Precision Special Purpose Aircraft rod ends male and female threaded respectively. Their outer members are manufactured from carbon Steel, magnetic particle inspected, with protective coating for corrosion resistance, the balls from 52100 Alloy steel, heat treated, chrome plated and inserts from brass. The letter “L” to prefix indicates Left Hand thread.

Please refer to the supplied chart for technical specifications and the RBC® HEIM® Bearings Catalog for additional information.

High Pressure Strut Valve with Small Diameter Thread Adapter. Fits in nose gear of certain Cessna models.

ALPHA AVIATION is a supplier of new, replacement and upgrade restraint systems based on AMSAFE® restraints. ALPHA AVIATION restraints are available for many models of General Aviation aircraft including Cessna 150, 150A thru K, Cessna 172L thru Q, 172RG (rear harnesses), Cessna 200 series and M20 A thru early J model aircraft which can add restraint assemblies by Minor Change.

ALPHA AVIATION replacement and upgrade restraints include complete, new FAA approved OEM quality AmSafe® 3-point diagonal restraints that meet current TSO standards and are available in both fixed strap and inertial reel equipped styles as well as 2-point rear seat lap belt replacements.  An 8130-3 Airworthiness Certificate is included.

For new installations ALPHA AVIATION provides FAA/PMA STC shoulder harness installation kits which include complete new OEM quality AmSafe® belt assemblies, meeting TSO-C114, as well as all FAA/PMA approved hardware for the addition of shoulder harnesses in  both the pilot and co-pilot seats. Matching 2-point rear seat lap belt replacements are also available. Usual lead time is 4 weeks for shipment.

ALPHA AVIATION  new, replacement and upgrade restraints are stocked in black, gray or fawn colors and are sold as "Per Seat" including 1 (one) restraint assembly - shoulder and lap belt.  They are also offered in over 50 different colors as Special Order at no additional charge.

For additional information please consult the supplied documentation.

The MS27643/AS27643 series airframe control bearings are offered by various manufacturers. They are  double row, ball, self-aligning, heavy duty bearings produced in accordance with AS7949 specification.

Depending on the manufacturer, rings and balls of these bearings are produced from premium quality AISI 52100 chrome steel or CRES 440C materials.  External surfaces (except bore, caps, and seals) are cadmium plated per AMS-QQ-P-416 or zinc nickel plated per OEM specifications. They include PTFE seals, CRES sealcaps and they are prelubricated. They are offered in different sizes but custom sizes, materials, tolerances, radial internal clearances, lubrication, plating, etc., can also be offered upon request.

Operating temperature range: -65 to +250 °F.

AVIATIONEU NEW ERA SC screw lug type battery terminals are available in three versions: SC(JGA), SC(JGY) and SC(JGB). Please refer to the specifications table. They are made from brass (99.7% copper), tin plated and can be used with wire sizes 1.5-1000mm2 in a wide range of applications. Operating Temperature: :-55 to 150 deg. C. Sold in packs of 100 pieces each with Minimum Order Quantity (MOQ) 25 packs. The appearing price is for reference only. Please contact us for quotation.

CONCENTRIC HE Series AC/DC power packs allows the selection from a broad range of standard components to design a power system to meet the exact specifications of applications, both vertical and horizontal, with a full range of valving, motor, pump and reservoir combinations and minimum inventory for maximum cost efficiency. Other advantages of the HE power packs includes low power consumption, quiet operation, proven field performance and long service life. Concentric HE2000 Series AC/DC Power HPUs  can be coupled via suitable hydraulic lines to a wide range of operating mechanisms. They normally operate hydraulic cylinders, but can be used with any other hydraulic actuating device. A unit can individually control up to four (4) hydraulic cylinders.

Product Features:

All units have:

12 or 24 VDC motors

Adjustable internal relief valve preset at factory

Load holding check valve

Reservoirs plumbed for horizontal / vertical mount

Various size cylindrical/rectangular reservoirs

9/16˝-18 SAE outlet and return ports (P/N 1303835 1/4˝-18 NPTF ports)

140 x 170 mesh inlet strainer

Please refer to the attached documentation for specifications & additional information.

ALCOR, an affiliated company of TEMPEST AERO GROUP is a manufacturer of sensors, instruments, test equipment, fuel treatment products, parts and accessories.

ALCOR CHT FAA/PMA approved thermocouples are offered in Type J gasket, Type J bayonet and Type K bayonet styles.

RBC Aerospace Bearings offers a full line of Mil Spec standard lined journal bearings, unlined bushings, and many specialty and custom designed products to support the aerospace industry.   Journals are designed in a straight (plain) configuration with a flange to accommodate a combination of radial and axial loads with corrosion resistant materials and coatings. Journals are also offered in high temperature and water resistant series. Typical journal materials are CRES 17-4PH and aluminum.  Bearings may also be cadmium or zinc nickel plated as required while CRES 440C and Inconel® 718 are available upon request. Journal bore and flanged journal face surfaces may also be provided with various liner systems to satisfy specific application requirements. Machinable liners  are qualified to AS81934 (formerly MIL-B-81934). For additional information please refer to the attached documentation.

OMRON A3C series cylindrical pushbutton switches have the basic design as the M2C Series cylindrical indicators. They provide a high-intensity uniform surface lighting while they have a miniature size with excellent feeling of operation. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.