High Pressure Strut Valve with Small Diameter Thread Adapter. Fits in nose gear of certain Cessna models.

FILLER NECK CF507A Vintage/Classic Style Fuel Cap fits 3" O.D. Filler Necks (Vented).

The PARKER HANNIFIN electronic plug amplifier VS 111 provides control for proportional pressure, directional, and throttle valves.

The plug amplifier may be mounted directly on the proportional solenoids and secured with a screw. The output of the amplifier supplies DC current for controlling one proportional solenoid.

This current is proportional to the command signal at the input of the amplifier. Through this, together with a proportional valve, an infinitely variable adjustment can be made to the pressure or flow.

Product Features:

• Solenoid control

• Simple installation, direct on valve

• Standard voltage or current signals for command signal inputs

• Capable of PLC control

• Solenoid current independent of temperature

• Solenoid connection 2+PE as per EN 175301-803

• Control connection 6+PE as per DIN 43651

IMPORTANT NOTE: Discontinued Item. Limited Availability from existing stocks in NEW SURPLUS  or USED Conditions.

For additional information please consult the supplied documentation or contact us.

LOWARA e-SV™ Series Stainless Steel Vertical Multistage Pumps

The LOWARA e-SV™ range  of vertical multistage pumps are highly reliable and technologically advanced multipurpose pumps and includes models in eleven sizes  with 1-3-5-10-15-22-33-46-66-92-125 m³/h nominal capacities.

All pumps ≥ 1.5kW are equipped with IE3 standard motors.

Design features:

Balanced mechanical seal replaceable with-out need for pump disassembling (for 10-15-22SV>=5,5kW, 33-46-66-92-125SV)

“O” Ring seat design to allow for simple outer sleeve dis-assembly

Floating for self alignment replaceable diffuser wear ring (PPS Glass filled technopolymer to withstand chemically corrosive, mechanically aggressive and high temperature liquids)

Reduced impeller axial thrust for longer standard motor bearing life (17,500h)

Hard Material Intermediate bush bearing (Tungsten Carbide/Silicon Carbide) to improve life and ability to withstand heavy duty applications, like boiler feeding

High temperature seal option (180°C max) with low NPSH design, high pressure design (up to 40 Bar), and passivated & electro-polished versions are available upon request.

0.37 - 18.5kw

Single or 3 phase

2 Year Warranty

Further unique features of the e-SV™ pumps include the integration of performance diagnostic devices such as the i-Alert™ vibration monitor and Dry Run sensor. The  i-Alert™ and the Dry Run sensor are available as an accessory for all models.

The e-SV™ pumps are certified by WRAS, ACS and D.M. 174 for use with potable water.

LOWARA e-SV™ Series Pump Versions:

e-SV: standard pump with IE3 motor

e-SVE: Variable speed Smart Pump with ultra premium efficiency IES2 drive package including a permanent magnet IE5 motor (up to 1,5 kW)

e-SVH: Variable speed pump with Hydrovar® pump controller (up to 22 kW)

For additional information please consult the Product Description section and the supplied documentation.

TEMPEST®, a TEMPEST AΕΡΟ GROUP™ affiliate, offers their Platinum Electronic Fluid Pump line with a range of electronic fuel pumps designed to replace many of the FACET® GOLD-FLO solid state fuel pumps. FAA/PMA certified, TEMPEST® operate in 14 to 28 volt systems of modern aircraft and use an internal high-flow filter element that can be easily replaced when specified by aircraft maintenance manuals. Use of TEMPEST® Platinum Electronic Fluid Pumps in most Cessna aircraft requires installation of tank modification SK421-26C service kit separately priced.

The pump filter element must be changed when specified by the aircraft maintenance manual or when the pump output/pressure diminishes (an event that may indicate a dirty clogged filter). A universal Filter Kit  P/N KIT-P1 is offered which fits all Aero Accessories Platinum Pumps and includes filter P/N 79729, gasket P/N 79136 & O-ring P/N 79139-2.

For additional information please refer to the supplied documentation.

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered  (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

FS20 series 3/8" fuel selectors provide a choice of lower and side fittings, and all units can be operated with an extension and universal joints. They come in the following types:

Type 1 (FS20-1): simple 3/8” ON/OFF shut off valve with 90 degrees action between the two positions. There are two ports and either port can be used as the inlet or outlet.

Type 2 (FS20-2): Three way 3/8” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 3 (FS20-3): three way selector with the positions LEFT - RIGHT - OFF. Generally used in low wing aircraft with a tank in each wing.

Type 4 (FS20-4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.There are 3 ports. The lower port is the outlet to the engine and can be Male AN-6, Female 1/4NPT or a  360 degree Banjo adjustable fitting with a male AN-6 end.

Type 5 (FS20-5): 4 way Fuel Selector ( 3 tanks and OFF ) with positions LEFT - MAIN - RIGHT - OFF, each at 90 degree intervals.

Type 7 (FS20-7): Newest in the range 3 way fuel selector with positions LEFT - RIGHT - OFF. The inlets are at the 45 degree positions, to the LEFT and RIGHT, and the outlet is at the base of the valve. FS20-7 has been designed for centre consol mounting.

Type 8 (FS20-8): 5 way Fuel Selector ( 4 tanks and OFF ) with positions LEFT TIP - LEFT - RIGHT - RIGHT TIP - OFF, each at 72 degree intervals. 

For additional information please refer to the product presentations, the supplied documentation or contact us.

FACET® and PUROLATOR® fuel pumps were manufactured and branded by MOTOR COMPONENTS, LLC. They were  compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives and capable of operation with 12/24V electric systems according to the selected model. These pumps have been discontinued although there is still a limited stock availability from stocks in various suppliers. Contact us for prices and availability.

The FACET® GOLD-FLO Solid State fuel pumps were enhanced versions of respective Interrupter models featuring a solid state circuitry and ease of installation and service. When properly installed, they assured a constant, smooth, dependable supply of fuel under pressure  in the hottest weather or in high altitudes eliminating vapor lock. Key product features: State of the art and sealed electronics, self priming and regulating, corrosion resistant (over 100 hours of salt spray), built in anti-siphon valve (positive shut-off), replaceable 74 micron filter, built in magnet to collect metal particles for additional filtration, 12 - 24 inches dry lift, 20 - 45 GPH, 1 - 8 PSI, 1.6 amp average, transient protection (24 volt only), -40 to 180 deg. F operating temperature range, UL/VCA certification, compliance to Mil-std-461D

Although FACET® GOLD-FLO solid state fuel pumps were certified and often used on UL and VCA aircraft, they were not FAA approved and as per their manufacturer statement, they were not designed, tested or manufactured for aircraft applications. Tempest FAA-PMA approved Platinum Electronic Fluid Pumps (separately listed) can be used as Facet Gold-Flo fluid pump replacements in this case. Please refer to the respective correlation chart for additional information.

FILPRO CORPORATION manufactures a wide range of high quality industrial filter parts intended for use as replacements to respective OEM products meeting or exceeding their specifications. All FILPRO offered filters are direct replacements in form, fit and function for the respective reference numbers of  OEM products. The company is also a distributor of OEM brands covering  air, liquid and gas filtration needs.

Offered FILPRO product portfolio includes Air Filters, Compressor & Vacuum Pump Filters, Hydraulic & Oil Filters, Dust Collector Filters, Liquid Filter Cartridges, Liquid Filter Bags, Spilltech Sorbents as well as Custom Filter Designs. FILPRO filtration products are used worldwide by OEM’s and end users in virtually every industrial application. Some of the major industries served include: Agriculture, Air Conditioning, Automotive, Government, Aviation,  Defense, Chemical Processing, Conveying, Food and Beverage Processing, HVAC, Hydraulics, Industrial Gas Production Irrigation, Medical, Metal Processing Packaging, Paint Processing, Petroleum, Pharmaceuticals, Plastics, Pneumatic, Printing, Pulp & Paper, Refrigeration, Tool & Machine, Transportation, Utilities, Vacuum Cleaner, Water Purification & Wastewater Treatment. For additional information on FILPRO filters please consult the supplied documentation or contact us.

Genuine DEUTZ filters provide the highest quality, best filtration performance and long service life leading to optimum protection, consistent performance and low fuel consumption of the engine. DEUTZ Air filters provide reliable filtration of combustion air, preventing dust from entering and causing increased wear inside a combustion engine. DEUTZ Oil filters preserve the engine performance and reliability protecting it from wearing and damage caused by dust, soot and other particles. DEUTZ Fuel filters provide highly efficient separation of harmful particles and water ensuring high fuel quality and engine protection from compromised engine´s performance and shortening of its life cycle.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.For more information on SWAGELOK® products please refer to the supplied documentation.

The PARKER AIRBORNE designs and manufactures motor driven fuel fuel  boost and transfer pumps and is part of the PARKER AEROSPACE GROUP of the PARKER HANNIFIN CORPORATION. These pumps consist standard equipment by the world's leading airframe manufacturers. The PARKER AIRBORNE product range includes:

- In Line fuel pumps for low-flow fuel applications,

- Submerged Centrifugal fuel pumps,

- High Performance Centrifugal fuel pumps for use in turboprop or turbofan jet aircraft,

- Submerged Duplex fuel pumps with two distinct pumping elements

The PARKER AIRBORNE fuel boost pumps use 28 V direct current (DC) to drive a highly efficiency, brushless DC (BLDC) motor or 115.5 V alternating current (AC) three-phase induction motors. The BLDCmotor-driven pumps incorporate integral electronic controllers using Hall Effect sensor rotor-position feedback. The hardware-only controller doe not use any software or programmable logic devices. These pumps feature:

-fuel cooled motor and electronics

-fuel wetted carbon bearings allowing for long-life fluid film design with no rotating shaft seals

-a high efficiency brushless DC (BLDC) motor or a three-phase induction motor

-qualification for high levels of lighting and electromagnetic interference (EMI).

The PARKER AIRBORNE fuel boost pumps can be furnished as either NEW, NEW EXCHANGE or OVERHAUL EXCHANGE. 

Offered pumps in OVERHAUL Condition are supplied in accordance with FAA-approved process specification, come with a FAA Form 8130-3 and can be provided in exchange of existing customer owned units (cores). In all EXCHANGE cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable condition. For additional information please consult the supplied documentation (*) or contact us.

In addition to the PARKER AIRBORNE pumps, RAPCO FAA-PMA approved pumps are also offered as direct replacements  to the respective PARKER AIRBORNE models. The RAPCO replacement pumps can be furnished as either NEW EXCHANGE or OVERHAUL EXCHANGE (please refer to their separate product presentation).

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenance manual, parts catalogue, or equipment list for approved data.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different air filters are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ARROW PNEUMATICS offers a complete line of filters, regulators, lubricators, desiccant and sintered bronze products which provide coverage for all markets – PBE, Industrial, Automotive Aftermarket, AG, Heavy Duty, etc. Coverage includes a complete line of desiccant products and air control units, not available through all competitors.

ARROW PNEUMATICS family of Integral Filter-Regulators includes combined filter and regulator units in three different series: Miniature, Intermediate or Standard. Depending on the selected series and product they are offered in different connection sizes (1/4", 3/8" or 1/2" NPT), bowl types (Polycarbonate, Metal with or without sight), drain types (Manual or Overnight) and optional accessories (Gauge, Panel Mount, Gauge & Panel Mount). 

Their specifications can cover a wide range of application requirements. For additional information please refer to the supplied documentation.

Sourced from quality producers, AVIATIONEU NEW ERA general purpose brass check valves with nylon cover are suitable for use in hydraulic, heating, air conditioning and pneumatic installations in vertical, horizontal or oblique positions. They are manufactured in accordance with ISO 228 standard and they are available in different sizes. Sold in pieces.

Switches for different functions, inteneded for use in Piper aircraft. Information on their applicability to different Piper aircraft models and serial numbers is included. For additional information and/or non listed switches please contact us.

FILLER NECK offers a variety of cap neck styles and materials which can support oil, fuel, hydraulic or water applications. Accessory options can be used to build the filler assembly you need. Three different strainers provide varying degrees of filtration for 300 Series caps and necks to help maintain clean fluids within the engine system. Special mountings match the type of connections required.

DONALDSON® COMPANY INC. is one of the largest filtration manufacturers in the world, providing filters and filtration components for a wide range of applications including commercial airliners, military applications and general aviation aircraft, agriculture and forestry, construction, mining,  truck, and bus manufacturers as well as other markets.

DONALDSON® AEROSPACE FILTRATION (AFS) cleaners/degreasers and oils are used in inlet barrier filters to bring the filters back to full capacity after their cleaning process. Offered in 1 US gallon and 5 US gallon sizes. Filter Cleaning Kits are also offered containing 1 US gallon of AFS Oil, 1 gallon of AFS Cleaner/Degreaser, a 16-ounce bottle and spout for re-oiling, a cleaner/degreaser sprayer, and seamer pliers (2-inch and 6-inch).

For additional information please consult the supplied documentation.

The EATON AEROQUIP FC300 are AQP elastomer hoses with a blue, abrasion-resistant fabric cover with single wire braid reinforcement over a synthetic rubber inner tube for longer life. The FC300 hoses are designed for high pressure fluid applications such as power steering, hydraulics, air, fuel, lubricating oils, fire resistant hydraulic fluids and other industrial fluids. They are also suitable for biodiesel use up to B20 and max temperature of 212°F (100°C). Available in different internal diameters in inches and for use in different maximum operating pressures (psi). Priced and sold by the foot.

Indicative Applications:

Power steering lines

Hydraulics

Air

Gasoline

Fuel

Lubricating oils

Over the wall air tool

Dot-approved air brake

Max operating pressure is 2250 psi

Operating Temperature Range

-55°F to +302°F (-49°C to +150°C)

Air not to exceed +250°F [+121°C]

Notes: 

(1) The FC300 Hose only works with FC300 steel fittings (to be ordered separately). Easily assembles with a bench vise and/or wrenches.

(2) FC300-32 and FC300-40 hoses DO NOT meet SAE 100R5 pressure with reusable fittings. FC300-32 is rated to 350 psi with crimp fittings. 

WELDON J Series FAA-PMA fuel pumps work with different fluids including gasoline, jet fuels, diesel fuel and oils. They can be used (depending on selected pump) for a variery of applications including emergency fuel boost, priming injected engines and others.

Appearing prices include core charges for no core reurn.

DOOSAN genuine filters are designed and developed specifically for DOOSAN machines. They provide:

- Outstanding filtration efficiency and low maintenance costs,

- Excellent DHC (Dust Holding Capacity) and stable filtration performance,

- Optimized design for DOOSAN machines and outstanding quality proven under harsh testing conditions,

- Longer lifespan with extensive filtering area,

- Maximize machine up-time and increases productivity, and

- Maximize the residual value of the machine.

DOOSAN genuine air filters exhibit a higher filtration efficiency and Dust Holding Capacity (DHC) than non genuine replacements in the market.

DOOSAN genuine oil filters feature:

- Strengthened Housing protecting the filter with superior durability against external impact,

- High-quality 2-layer media maximizing the filtration efficiency and DHC while at the same time protecting engine parts and extending the lifespan of the filter,

- Wire Mesh maximizing the filtering area and DHC by preventing pleats from sticking together,

- Spiral center tube ideal for working under high pressure,

- Reinforced Seam offering high-pressure and longcycle impulse resistance while it strengthens the filter and protects the engine,

- End Cap with superior bonding preventing the inflow of contaminants.

Direct replacements to DOOSAN filters are offered from different quality filter makers including MANN, HENGST, DONALDSON, FILTRON and others. These filters are compatible with DOOSAN filters in form, fit and function.