Switches for different functions, inteneded for use in Piper aircraft. Information on their applicability to different Piper aircraft models and serial numbers is included. For additional information and/or non listed switches please contact us.

CURTIS PLT-275AV Flush Valves 6 Holes' Adapter Plates Assembly.

Product Specifications:

Diameter: 2.75 in.

Depth: 640,000-650,000

From Mounting Surface to Bottom Hole Diameter: 1-1/2 in.

Not Certified

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered  (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

FS25 series 1/2" fuel selectors has been designed for engines up to 560 HP (50+ GHP), provides a choice of fittings and all units can be operated with an extension and universal joints. They come in the following types:

Type 1 (FS25-1): ON / OFF Shut Off valve for 1/2" fuel lines. There is a 90 degree action between the two positions and included with the valve is the safety button. 

Type 2 (FS25-2): Three way 3/8” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 3 (FS25-3): Three way selector with positions LEFT - RIGHT - OFF. No lower fitting. This valve has inlets ports at the Left and Right hand side and the outlet towards the front.

Type 4 (FS25-4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.There are 3 ports. The lower port is the outlet to the engine and can be Male AN-8, Female 3/8 NPT or a  360 degree Banjo adjustable fitting with a male AN-8 end.

Type 5 (FS25-5): 4 way Fuel Selector ( 3 tanks and OFF ) with positions LEFT - MAIN - RIGHT - OFF, each at 90 degree intervals. The inlet ports are around the side of the valve and the outlet is at the bottom of the valve.

For additional information please refer to the product presentations, the supplied documentation or contact us.

The PARKER HANNIFIN electronic plug amplifier VS 111 provides control for proportional pressure, directional, and throttle valves.

The plug amplifier may be mounted directly on the proportional solenoids and secured with a screw. The output of the amplifier supplies DC current for controlling one proportional solenoid.

This current is proportional to the command signal at the input of the amplifier. Through this, together with a proportional valve, an infinitely variable adjustment can be made to the pressure or flow.

Product Features:

• Solenoid control

• Simple installation, direct on valve

• Standard voltage or current signals for command signal inputs

• Capable of PLC control

• Solenoid current independent of temperature

• Solenoid connection 2+PE as per EN 175301-803

• Control connection 6+PE as per DIN 43651

IMPORTANT NOTE: Discontinued Item. Limited Availability from existing stocks in NEW SURPLUS  or USED Conditions.

For additional information please consult the supplied documentation or contact us.

ZEFTRONICS Voltage Regulator with ground fault protection, trouble shooting light, black plastic connector & 16V over voltage protection built in.

In 1971 AURORA BEARING COMPANY entered the rod end and spherical bearing market and soon became a major force in the rod end industry. The AURORA BEARING product potfolio today includes both Aerospace / Military and Commercial / Industrial rod ends and standard spherical bearings in inch and metric systems while special bearings can be designed and manufactured on request. Different series of these bearings are separately presented together with respective documentation.

AURORA BEARING MW & MG Series include Precision General Purpose Female Rod Ends with the following features. Rod ends in these series are equivalent to RBC® HEIM® BEARINGS part numbers shown in the parenthesis.

Body - Low carbon steel, protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.

Ball - Alloy steel, heat treated, hard chrome plated.

Race - Low carbon steel, protective coated for corrosion resistance.

Left-hand threaded units have an identification groove near end of shank.

Grease Fitting available for sizes -3 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MW-6Z = Zerk Type Fitting MW-6F = Flush Type Fitting.

Load ratings apply only to rod ends without grease fittings.

Studded configuration available upon request. Specify by adding suffix "S". Ex.: MW-8S.

PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MW-8T.

Different bolts used on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

An extensive range of standard MIL-SPEC and Cessna pulleys and pulley kits is offered by McFarlane Aviation. The kits contain all pulleys and cotter pins required to replace all flight control system pulleys in one airplane containing the respective part numbers and quantities required. Different McFarlane pulley series include: 

MCS378 Series phenolic flight control pulleys with ball bearings, FAA-PMA approved replacements for the Cessna S378, A-/BB-, and NAS383- series pulleys on Cessna Aircraft. The MCS378- series pulleys supersede these for most Cessna aircraft applications and  feature high quality sealed precision ball bearings, superior to low grade, open seal bearings used in the Cessna S378-()L light duty series pulleys that they replace.

MS20219 Series aircraft secondary control pulleys, superseding the respective AN219 series pulleys are offered either with high pressure laminated phenolic sheave (MS20219 Series) or aluminum alloy sheave anodized per MIL-A-8625 (MS20219A Series), both with fixed ball bearing with contact seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley should not be installed in flight control systems.

MS20220 Series phenolic flight control pulleys with ball bearings. These supersede the AN220- Series pulleys of like dash number.

MS24566 Series phenolic flight control pulleys with ball bearings. MS24566 pulleys can be used to replace the corresponding AN210 pulleys designated by the letters "A" or "B" in their dash numbers as they differ in the maximum load limit.

NAS383 Series phenolic commercial grade pulleys with graphite impregnated bronze sleeve bearings. These are typically used with a bushing. The MCS378 pulley replaces both the NAS383 pulley and it's bushing.

S394, S1052-1/ S1710-1 Cessna nylon pulleys with no bearings.

S378-4S Cessna pulley similar to S378-4 but with smaller diameter. Used on Cessna airplanes 177RG s/n 177RG0202 and on, and F177RG0038 and on for routing stabilator, stabilator trim, and rudder cables. Six required per aircraft.

1660433 Series Cessna phenolic pulleys with ball bearings.

MS24665 series cotter pins are also available with the pulley kits or separately in packs of 10 or 25.

Please refer to the individual product presentations, the respective charts provided for specifications and cross-reference information or contact us.

Bellcrank bearings are commonly used for various control bellcranks throughout many experimental aircraft. They are prepacked with lubricant conforming to Mil. -G23827, inspected per Mil. I 45208A and 100% traceable. Operating temperature range -30 Deg. F to +250 Deg. F

Parker Hannifin (Cleveland Aircraft Wheel & Brake Division) designs and manufactures wheel assemblies for worldwide aircraft markets. Their wheels, used in conjunction with tires, provide support for  the tires and weight of the aircraft. Combined with brakes, they assist in directional and stopping control during aircraft ground maneuvers, taxi, takeoff, and landing. Cleveland Wheels and Brakes brand products are used on more than 80 percent of general aviation aircraft while their wheel assemblies  are now offered for military and business aviation applications. Cleveland's product lines include both aircraft wheel and wheel and brake assemblies for nose and main wheels to meet a variety of aircraft specifications and brake assembly interfaces. Both main and nose wheels are made from either aluminum castings, magnesium castings, or aluminum forgings.

The main wheels are of the divided type, incorporating inner wheel half and outer wheel half, plus a disc, which are fastened together with tie bolts, washers, and nuts. Their key features include:

• Low maintenance for tubeless or tube-type

• Tapered roller bearings for dimensional stability and long life

• Molded grease seals for superior bearing bore sealing properties

• Split-rim design to allow ease of tire mounting

• High-strength through-bolts

• Sand castings and forgings

• Worldwide distributor network for quick parts availability

Cleveland's TSO'd Main Wheel assemblies are offered in different models. The listed models are designed for 6.00-6 tube tires and intended for use in general and business aviation, turboprop passenger, and helicopter applications. Sold each or in pairs whenever specified.

FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.

Appearing prices are for units in NEW Condition. For units in USED Condition (mostly SERVICEABLE/OVERHAULED with proper certification) please contact us for availability and quotation. 

For more information on the parts and quantities per assembly please refer to the respective illustrative parts list or contact us. 

(NCNR) product: non-cancellable/non-returnable once the order is placed. Often requires  backordering to the manufacturer. Delivery time cannot be specified.

Sourced from quality producers, AVIATIONEU NEW ERA general purpose brass check valves with nylon cover are suitable for use in hydraulic, heating, air conditioning and pneumatic installations in vertical, horizontal or oblique positions. They are manufactured in accordance with ISO 228 standard and they are available in different sizes. Sold in pieces.

Master Relay (Battery Solenoid) for all homebuilts (not suitable for certified aircraft). Continuous duty. Offered for 12V and 24V systems.

OMRON A3C series cylindrical pushbutton switches have the basic design as the M2C Series cylindrical indicators. They provide a high-intensity uniform surface lighting while they have a miniature size with excellent feeling of operation. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

The MS27643/AS27643 series airframe control bearings are offered by various manufacturers. They are  double row, ball, self-aligning, heavy duty bearings produced in accordance with AS7949 specification.

Depending on the manufacturer, rings and balls of these bearings are produced from premium quality AISI 52100 chrome steel or CRES 440C materials.  External surfaces (except bore, caps, and seals) are cadmium plated per AMS-QQ-P-416 or zinc nickel plated per OEM specifications. They include PTFE seals, CRES sealcaps and they are prelubricated. They are offered in different sizes but custom sizes, materials, tolerances, radial internal clearances, lubrication, plating, etc., can also be offered upon request.

Operating temperature range: -65 to +250 °F.

The brake assemblies and disc combinations by CLEVELAND WHEELS & BRAKES are designed and qualification tested to properly and safely decelerate the aircraft under various conditions. The brake assemblies consists of one or more pistons depending upon the aircraft requirements. For more information on the parts and quantities per assembly please refer to the product presentations and the attached documentation. 

NCNR product: non-cancellable/non-returnable once the order is placed. Often requires  backordering to the manufacturer. Delivery time cannot be specified.

FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.

These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz). 

Product Features:

Lightweight, less than 2 oz.

Push/Pull Actuator Thermal Circuit Breaker

0.5 amp to 50 amp ratings may be used as on/off switch

Cannot be reset against overload

W23 has visible trip indicator

Screw termination

Trip-free operation

The ORION A600 PG/PR code 4 lighting system by WHELEN AEROSPACE TECHNOLOGIES (WAT) combines a wing tip anti-collision white strobe with forward and tail position conventional navigation lights in one unit which can be used as a replacement for conventional teardrop type navigation lights. Tail position light eliminates the need for a tail mounted position light. 

WHELEN A600 PG/PR incorporates red or green nav light on the forward section, a strobe light with magnifying glass lens in the center and a clear tail position light on the aft portion. Newly developed magnifying strobe lens (A 612) concentrates the maximum xenon light energy in the horizontal plane increasing the light intensity by two to five times. The tail position light on the wingtip gives turning reference to the aircraft behind by displaying angle and white bank while turning. It also eliminates the need for a tail mounted position light which may be omitted when using A600 lighting system. FAA-PMA Approved. Available in 14 or 28 VDC and in a radio-shielded versions. 

Available in 14 or 28 VDC and in a radio-shielded version. The forward position lamp is 26 watts and the taillight lamp is 25 watts.

Product Specifications:

Weight: 0.8 lbs. (363gm)

Position Lamps Power Consumption: 4 amps @ 14 VDC; 2 amps @ 28 VDC 

Exposed Height: 2.4” (61mm) 

Length: 5.63” (143mm) 

Width: 1.7” (43mm) 

This product series is no longer available.  Please refer to model 90340 which is a direct replacement (exact footprint) for the model A600PG/PR without replacing the current strobe power supply. 

DYNON AVIONICS AOA/Pitot probes perform two functions: airspeed and angle of attack sensing. These functions require having two pressure ports on the tip of the probe. The normal pitot pressure port is on the front face of the probe and is designed to be insensitive to angle of attack. The second pressure port is located on an angled surface just under the pitot port and is designed to be very sensitive to AOA. They are under-wing mount, L-shaped  probes which can be installed  easily with simple plug-n-play integration with Dynon and Advanced Products.Their installation requires a mounting bracket sold separately. The pressure from each port is delivered via separate air lines to the instrument where they are compared to previously calibrated scenarios specific to the aircraft. Competitively priced, they are offered in Non-Heated and Heated versions. The Heated AOA Pitot includes a nichrome heating element that is regulated by a separate pitot heater controller unit supplied with the pitot. The controller actively monitors a temperature sensor embedded within the pitot head and regulates the power to maintain a constant temperature. This not only conserves energy but additionally prolongs the life of the heater. The controller also outputs a signal that can be wired to a warning light in the cockpit to warn the pilot anytime there is a malfunction or that the pitot is turned off.