ATTWOOD SAHARA automatic bilge pumps are self-contained in one compact yet durable low profile bilge pumping package, including pump, wire seals, strainer and mercury-free switch. Their new SAHARA Mk2 pumps replacing older Mk1 models are the only automatic bilge pump that eliminate air-locks with their patented X-Air™ impeller ejecting trapped air in the pump and pipework. They are designed for ultimate reliability and durability in both freshwater and saltwater applications.

SAHARA Mk2 are the easiest automatic bilge pumps to install and service. They can be installed quickly and easily in tight spaces while servicing the pump cartridge from hard-to-reach areas is possible using only one hand. External mounting feet and integrated outlet reduces time and effort. Their universal mounting patterns makes them backwards compatible with the most popular bilge pumps on the market making their replacement simple.

SAHARA Mk2 pumps offer 40% better protection against water ingress and electrolysis vs. their Mk1 counterparts and 2 times better protection than the leading competition. ATTWOOD’s SteadySwitch™ reduces cycling and extends the life of the pump. They are covered with 3-Year Warranty.

SAHARA Mk2 automatic bilge pumps come in 3 models depending on their GPH capacity:

- S500 12V DC with a 500 GPH capacity at open flow, sized for boats up to approximately 17 feet,

- S800 offered in 12V/24V DC configurations with a 800 GPH capacity at open flow, suitable for larger recreational boats,

-  the most powerful and efficient S1200 pumps offered in 12V/24V DC configurations with a 1200 GPH capacity at open flow, suitable for larger boats and yachts.

Service kits for SAHARA Mk2 pumps are also offered.

For additional information please refer to the supplied documentation.

FACET® and PUROLATOR® fuel pumps were manufactured and branded by MOTOR COMPONENTS, LLC. They were  compatible with gasoline, diesel, biodiesel, blended alcohol fuels and fuel additives and capable of operation with 12/24V electric systems according to the selected model. These pumps have been discontinued although there is still a limited stock availability from stocks in various suppliers. Contact us for prices and availability.

The FACET® GOLD-FLO Solid State fuel pumps were enhanced versions of respective Interrupter models featuring a solid state circuitry and ease of installation and service. When properly installed, they assured a constant, smooth, dependable supply of fuel under pressure  in the hottest weather or in high altitudes eliminating vapor lock. Key product features: State of the art and sealed electronics, self priming and regulating, corrosion resistant (over 100 hours of salt spray), built in anti-siphon valve (positive shut-off), replaceable 74 micron filter, built in magnet to collect metal particles for additional filtration, 12 - 24 inches dry lift, 20 - 45 GPH, 1 - 8 PSI, 1.6 amp average, transient protection (24 volt only), -40 to 180 deg. F operating temperature range, UL/VCA certification, compliance to Mil-std-461D

Although FACET® GOLD-FLO solid state fuel pumps were certified and often used on UL and VCA aircraft, they were not FAA approved and as per their manufacturer statement, they were not designed, tested or manufactured for aircraft applications. Tempest FAA-PMA approved Platinum Electronic Fluid Pumps (separately listed) can be used as Facet Gold-Flo fluid pump replacements in this case. Please refer to the respective correlation chart for additional information.

FLUITEK CORPORATION manufactures a wide range of industrial filter elements (filters) intended for use as replacements to respective OEM products. They are offered either per piece or in packs of specified number of filters indicated by the number after the letters "PK" in the product reference number (SKU). FLUITEK products are made to meet or exceed OEM specifications. For additional information on FLUITEK prodict portfolio please consult the Product Description Section or contact us.

The ACS unvented flush fuel cap operates with a lift and turn lever. This cap has a 3" opening for easy refueling. Cap & adapter ring are anodized "clear" for corrosion resistance. Cap is fastened to adapter ring with safety chain.

ZF FRIEDRICHSHAFEN AG (also known as ZF Group) is a global technology company offering products and systems for vehicle motion control, integrated safety, automated driving, and electric mobility. The product portfolio is continuously enhanced and adapted to the market conditions and safety requirements. ZF products and systems ae extensively used in passenger cars, commercial vehicles as well as in various other sectors such as defense and aviation industries, construction and agricultural machinery, wind power, marine propulsion, rail drives and test systems. ZF Aftermarket is world's leading supplier in the automotive and industrial aftermarket, offering an exceptional product range of OE quality spare parts and services.

ZF has decades of experience in the design and development of marine propulsion systems. The company offers complete driveline systems as well as components for all types of vessels – motor yachts, watersports boats, high-speed ferries, workboats and commercial vessels, in a power range from 10 to 12,000 kW. The product portfolio includes a comprehensive range of transmissions (reversing, non-reversing and hybrid), propellers, steering systems and CAN-bus-compatible electronic control systems, azimuth thrusters, tunnel thrusters and sail drives. ZF spin-on transmission gearbox oil filters are used in different series of ZF Marine Propulsion Systems. With high quality, intelligent design concepts and individual service, ZF guarantees minimum downtimes and low life cycle costs. Customer range for these systems include shipyards, ship owners and operators as well as engine manufacturers worldwide. 

For additional information please consult the supplied documentation.

FILLER NECK CF507A Vintage/Classic Style Fuel Cap fits 3" O.D. Filler Necks (Vented).

WELDON J Series FAA-PMA fuel pumps work with different fluids including gasoline, jet fuels, diesel fuel and oils. They can be used (depending on selected pump) for a variery of applications including emergency fuel boost, priming injected engines and others.

Appearing prices include core charges for no core reurn.

FACET FILTRATION GROUP® is the global leading manufacturer of filtration products and systems with an extensive range of products including filter cartidges, housings, water treatment equipment and complete systems. Group products are covering a wide range of applications from aviation fueling and onshore, offshore or onboard marine applications to protection from debris and water contamination of diesel fuel supply of heavy equipment and water treatment facilities. FACET® fuel pumps and filters for aviation uses are separately presented.

The Andair standard fuel selector valve range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. 

Manufactured to the highest standards, all Andair fuel selector valves are designed for safety, provide a precise and smooth feel in operation and can be supplied with custom engraving. They feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off. All these features help prevent the pilot switching the wrong tank or turning the fuel off.

Andair duplex fuel selector valves have two separate compartments so that two independent fuel lines can be switched simultaneously making them ideal for fuel injected or diesel engines where there needs to be a return line. It allows to pipe surplus fuel to the same tank from which it was drawn. This avoids overfilling the return tank or having an overly complicated fuel system. 

FS2020(*) fuel selector valves feature two 3/8" sections for feed & return. FS2520(*) fuel selector valves feature one 1/2" feed section and one 3/8" return section. Both can be supplied with different ANDAIR fittings to meet application requirements. 

Engines that can benefit from these valves are Surburu, Continental, Rotax, and Diesel aircraft engines. 

For additional information please refer to the product presentations, the supplied documentation or contact us.

(*) Fittings in product titles relate to inlet from right tank, outlet to engine and inlet from left tank in the lower and upper side of the valve.

NEWTON CONSULTING manufactures and offers Aero extensive range of fue/oiI/water tank caps and special fittings for use on most of the worlds super cars and bikes and many light aircraft (Adam, CAP, Cirrus, Diamond, Lancair Columbia, Lancair kits, Nemesis, Vans, Velocity and others). Their centres are forged from 6063 or 6082 aluminum and then polished and anodised. The high precision and easy to operate mechanism is very secure and non vented. The flanges are diamond turned and again polished and anodised.  Cap assemblies come complete with cap, gasket, and flanges as ordered. Two keys come with the locking version. Fixing can be by rivet, bolt, weld or glass in as appropriate. Attach o-ring kits are available and can be ordered separately as needed.

Different Aero cap series include:

The Aero 200 series, the smallest and lightest of Aero filler caps. Available only in non-locking version and with either a 6 hole bolt on flange  (A26S) or a Glass-in flange (A20G).

The Aero 300 series, the first choice among designers and installers, offered as standard (non-locking) or locking versions with four different bolt configurations (0 hole, glass in, 6 hole & 9 hole, flange necks with lead free restrictor flaps and many special flange options to meet application requirements such as:

- F30G for installation into a composite skin.

- F30 GS, ideal for wooden aeroplanes avoiding recesses and doors.

- A30L CIRRUS with a low profile threaded flange designed for Cirrus to enable the cap to be fitted after the wing is painted, avoiding damage, dirt, masking, filling and other nuisances.

- FN362, a 6 hole bolt-on flange with hose neck

- A30L VANS, offered if a metal version is preferred to the lightweight version which now comes as standard with Vans aircraft kits.

- Z3 used in specific circumstances.

- Z30L VANS, a cap/flange offered as a retrofit assembly that will go into the older Vans/Usher cap/ flange.

The Aero 400 series, with lock (L) or without a lock (S) including A48S/L with aluminum flange for direct connection to tank and A4LT, plastic centre for use with Aero 400 flanges.

The Aero 500 series, with lock (L) or without a lock (S) and two standard fixing arrangements: A512S/L with flange for direct connection to tank and A50S/LG, glass in flange, moulded directly into tank vehicle skin.

The Aero 600 series, a super light version of the Aero 500, with a smaller footprint but retailing the same 3 inch (77.0mm) filling hole allowing the cap to be used for all fuels.

Tempest® Spin EZ® FAA PMA approved aviation oil filters are manufactured by Aero Accessories®, LLC. Apart Spin-EZ® gasket oil filters the company also manufactures other pneumatic products such as Tornado™ dry air pump.

Product Features:

Improved Nut Welds – Nut welds are so strong that the can will distort without breaking the welds.Tempest Original filters can be installed without the danger of installation nuts falling off.

Improved By-Pass Valve for Continental® Engines – Meets TCM by-pass specification of 12-14 psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.

PC Housing (Patent Pending) – the only filter to incorporate a housing for the by-pass valve to prevent the restriction of the oil outlet should a failure of the by-pass valve occur.

Burst strength of 600 psi – Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Spin EZ oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.

Full Pleat Media – The resin-impregnated, cellulosic, full pleat media is designed for uniform flow and collapse resistance.  312 square inches is the most in aviation oil filters.

Tempest® Spin EZ® oil filters are sold individualy but also offered as economical, convenient, and easy to handle six and twelve packs. Spin EZ® Solid Lubricant, aTempest Spin EZ oil filter’s proprietary solid lubricant is also available allowing for easy removal of the filter. Unlike oil, grease or DC4 compound that leave the filter seemingly “bonded” to the engines mount pad, making it nearly impossible to remove, Tempest® Spin EZ solid lubricant won't extrude or squirt out from under the seal.

PLease consult the supplied documentation for additional information.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.For more information on SWAGELOK® products please refer to the supplied documentation.

An oil pressure sensor is a device used to measure the oil pressure on an engine. The term oil pressure sensor is often used to denote  at least two different and distinct types of sensor - an oil pressure switch and and oil pressure sender.

An oil pressure switch is an egine protection device. It is a mechanical device that has a switch inside. The oil pressure switch may be 1, 2, or 3 insulated terminals (pins). Traditionally most oil switches for protection close when they activate, to show low oil pressure. 

An oil pressure sender is a device that senses the oil pressure of an engine and transmits it to the engine or machine controller. It is used as a generator protection device, to display the oil pressure to a user or for logging and diagnostic purposes. Unlike an oil pressure switch, it can display a range of readings.

Oil pressure sensors are used aircrafts and offered either as parts from the respective OEMs or as replacement parts from third parties. They are alternatively termed as HOBBS switches.

Please refer to the manufacturer Illustrated Part Cataloge (IPC) or the technical specifications of offered sensiors to select the right sensor for your application.

FILLER NECK offers a variety of cap neck styles and materials which can support oil, fuel, hydraulic or water applications. Accessory options can be used to build the filler assembly you need. Three different strainers provide varying degrees of filtration for 300 Series caps and necks to help maintain clean fluids within the engine system. Special mountings match the type of connections required.

DONALDSON® is a leading world-wide filter supplier for commercial jets, military vehicles, off-road equipment, trucks, light-duty vehicles, power plants, dust collectors, industrial compressors and more. The company is the OEM for  FAA-PMA air filters installed in Cessna (all SE piston models), Piper (turbo charged aircraft), Beechcraft,  Maule & Mooney aircraft delivering consistent and reliable performance.

Product Features:

Selection: Over 75 filter models for Cessna, Beech, Maule, Mooney, Piper and other aircraft.

Easy Installation & Maintenance: No removable parts or oil, may be washed with water.

Better Airflow:  In laboratory airflow tests comparing DONALDSON®, Bracket and Challenger Aviation (K&N) filters for Cessna 172 aircraft, DONALDSON® had the lowest restriction (best airflow). The reasons for this include:

• Filter media is composed of synthetic fibers

• Evenly distributed uniform size and shape media fibers

• More media area and less frame

• Deeper filter pleats

• No oil

Stop more dirt and protect the engine better: They achieve 98.5% or greater filtration efficiency according to ISO5011 fine and coarse dust requirements, greatly exceeding the other filters. 

Long Lasting: rated to last 500 hours, five to 10 times longer than foam filters. Replacement after three years, five cleanings or 500 flight hours, whichever occurs first.

OEM and FAA-PMA Certified: Designed to manufacturer specifications, DONALDSON® filters don not require STCs .

Thoroughly Tested: Third party lab tests show Donaldson filters meet or exceed FAA fire safety regulation per FAR 25.853 and FAR 23.1107 Induction system filters.

Please refer to the attached documentation on the application of DONALDSON® filters in different aircraft/models.

Forged brass 90º throw fuel valves with fluoroelastomer seals. Available in 1/4", 3/8", or 1/2" female NPT threads. Light operating force makes them ideal for remote operation. Not FAA approved.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different vacuum pumps are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. The RAPCO FAA/PMA'd vacuum pump, RA215CC  is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. Please refer to the separate product presentation for RAPCO Dry Air Pumps for vacuum or pressure system applications.

Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

MANN+HUMMEL GmbH is a manufacturer of high-performance, precision-engineered filtration products offered under their globally recognized MANN-FILTER® brand. The MANN-FILTER®  product portfolio includes 6,800 superior original equipment quality filters and automotive aftermarket filters protecting engines, passengers and machines and used in over 300,000 applications.

MANN+HUMMEL PUROLATOR® brand relates to a compehensive range of engine air and oil filters, power steering filters, fuel/water separator filters and cabin air filters. Includes a growing line of heavy-duty filtration products for medium- and heavy-duty applications and can be used on various trucks such as Freightliner, International, Mack, Volvo, Peterbilt, Sterling and Kenworth, Bomag and Atlas Copco compressors, Deutz and Fendt tractors and others.

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered  (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

FS20 series 3/8" fuel selectors provide a choice of lower and side fittings, and all units can be operated with an extension and universal joints. They come in the following types:

Type 1 (FS20-1): simple 3/8” ON/OFF shut off valve with 90 degrees action between the two positions. There are two ports and either port can be used as the inlet or outlet.

Type 2 (FS20-2): Three way 3/8” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 3 (FS20-3): three way selector with the positions LEFT - RIGHT - OFF. Generally used in low wing aircraft with a tank in each wing.

Type 4 (FS20-4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.There are 3 ports. The lower port is the outlet to the engine and can be Male AN-6, Female 1/4NPT or a  360 degree Banjo adjustable fitting with a male AN-6 end.

Type 5 (FS20-5): 4 way Fuel Selector ( 3 tanks and OFF ) with positions LEFT - MAIN - RIGHT - OFF, each at 90 degree intervals.

Type 7 (FS20-7): Newest in the range 3 way fuel selector with positions LEFT - RIGHT - OFF. The inlets are at the 45 degree positions, to the LEFT and RIGHT, and the outlet is at the base of the valve. FS20-7 has been designed for centre consol mounting.

Type 8 (FS20-8): 5 way Fuel Selector ( 4 tanks and OFF ) with positions LEFT TIP - LEFT - RIGHT - RIGHT TIP - OFF, each at 72 degree intervals. 

For additional information please refer to the product presentations, the supplied documentation or contact us.

CHAMPION AEROSPACE designs and manufactures CHAMPION-brand filters and piston-engine ignition components for both OEM and aftermarket for general aviation aircraft applications.

CHAMPION FAA/PMA Approved Spin-On Oil Filters replace oil filter elements. They are easy to install and save time and clean-up.

Their full-pleat, resin-impregnated micronic filter media traps all harmful particles, including metallic chips which result from abnormal engine wear. Because the oil flows through many layers of locked-in fibers, there is no migration of fiber material to clog engine oil passages or affect bearing surfaces. According to industry-approved tests, the CHAMPION oil filters trap and hold more dirt and harmful particles during their normal operating time than any other similar filters. 

Product Features:

Replacement elements service engine-mounted or line-installed filter systems incorporating a permanent housing assembly.

All sizes of replacement elements are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons

Modern spin-on oil filters contain the element, incorporating the anti-drain back valve mechanism (and internal bypass valve 48108-1/48109-1), and are sealed in a disposable housing.

All sizes of spin-on filters are packed 12 per case of a single part number in heavy, re-shippable corrugated-board cartons.

Silicone impregnated filter gasket aids in future removal.

Shorter stud length on CH 48110-1 for tight clearance applications.

Heavy, corrugated steel center tube supports each convoluted pleat of the filter element and produces a substantially higher collapse-pressure rating, twice that of other similar filters.

Maximum full-flow design, without interference from center-bolt oil filter assemblies, provides increased oil filtration each engine-operating hour.

Sold each or in packs of 12 filters per pack.