The KLIXON® PS series 2 to 35 Amp precision thermal circuit breakers by SENSATA TECHNOLOGIES Inc. (formerly Texas Instruments Sensors & Controls) are designed to interrupt short circuits or overloads and combines trip-free protection with fast response time. They feature a bi-metallic snap-acting disc as the sensing element and they are widely used in production and military aircraft where precise ultimate trip characteristics are required. Models PSM and PSM-N are available in the following ampere ratings 2, 3, 5, 10, 15, 20, 25, 35. When ordering specify if neck-mounting style is wanted by placing “N” after ampere rating. Example: PSM-10N

The KLIXON® PDL series thermal breakers are designed to meet the harshest environmental requirements. They are weatherproof for protection against moisture, dust, grease, fuel vapors, and other harsh environments. For weatherproof circuit breakers in ratings from 50 to 150 amperes, order Model PDLM. 

The KLIXON® 7277 series circuit breakers are the commercial grade version of the 7274 series circuit breakers  which are small, lightweight, low amperage devices that are specifically designed to protect aircraft/aerospace cable and components in airborne vehicles and equipment. The KLIXON® 7277 series circuit breakers are physically and electrically identical to the 7274-2 military grade circuit breakers, with the exception that the 7277 series has wider calibration limits.  Klixon® 7277 series breakers have been designed for applications that do not require the tighter performance characteristics and approvals of 7277-2 series military circuit breakers. 

Originally developed as an alternative to slow blow fuses, the trip–free 7277 series breakers are used extensively as primary electrical circuit protection on general aviation aircraft. The wider calibration limits of the 7277 has also resulted in applications including protection for data processing and telecommunications equipment, computers, flight simulators, construction, material handling and other industrial,electronic equipment. Suitable for use on trainer / simulator applications where all breakers are operated on low ampere control current, different ampere rating inserts (amp ratings on top of push button) can be ordered.

KLIXON® 7277 series circuit breakers' features include:

• Miniature size

• Light weight

• Trip–free design

• Current rating: 0.5 to 20 amps

• High vibration resistance

• Options include: dust boot (part #14500-1 fits 15/32 bushing, part #14500-5 fits 7/16 bushing), auxiliary switch, terminal hardware, longer push button.

For additional information please consult the supplied documentation.

The KLIXON® 7270/7271 series circuit breakers were designed to utilize less behind panel space while protecting wire and cable in aircraft and ground support equipment on either 120 VAC, 400 Hz or 30 VDC systems.

These circuit breakers are available with neck mounting (7270-1 and 7271-8) or standard cover plate (7270-7 and 7271-3). In each of these KLIXON® circuit breakers, the bi-metallic element assures uniform current distribution throughout its responsive area. This design reduces current density at the critical areas, resulting in an element having a much higher interrupting capability than conventional design. Inherently resistant to shock and vibration, the KLIXON® disc element is capable of precise calibration settings and will retain the initial calibration within close tolerances throughout the service life of the breaker. Both circuit breakers have conventional actuator action; i.e., the toggle actuator on the 7270 moves to the OFF position for trip indication and the button the 7271 pops out. A standard black button with a white collar is used. For additional information please refer to the attached documentation.

SHANGHAI HANSI INDUSTRIAL CO. (HANSI) is an adhesive producer with a wide product range of polyurethane and epoxy adhesives, acrylate and water-based adhesives, silicone adhesives and respective hardeners. HANSI adhesives are used in an extensive range of applications including aerospace, automotive, electronics, construction, transportation, filter, sound insulation and composite.

HANSI high performance solvent free two component epoxy resin adhesives can be used for bonding and sealing of large-area composite panels of metal and non-metal materials. They exhibit high strength and toughness and thermal shok resistance. Their VOC content makes them more environmentally friendly and safe. Different series include:

MegaGlue® 2003/5112/3042/ 45121V Series & ACROBOND® EP242 Series. Products in these series are widely used and feature good toughness, wide temperature application range and moderate activation time which can reduce VOC emissions, reduce weight and energy consumption.

MegaGlue® 4001/4001CM Series. Products are high viscosity fast curing toughened two-component epoxy based adhesives. They can be used for bonding and sealing of FRP, SMC, CGRP and other composite materials in rail transportation, automobile, aerospace and other industries. Mostly selected for their high strength and toughness and their fast curing.

MegaGlue® 3003/3010 Series.  Products in these series include toughened two-component epoxy based adhesives with high viscosity and fast curing. Used in surface repairs, edge sealings and landfilling in rail transportation, ship, van and other industries.

Depending on the selected product, HANSI MegaGlue® epoxy resin adhesives are offered in 50ml/400ml cartridges, 15 kg buckets or 20 kg barrels.

For additional information on HANSI MegaGlue® epoxy resin adhesives please consult the supplied documentation or contact us.

SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance. 

SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.

SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.

The SHELL® Gadus range of industrial greases (formerly SHELL® Alvania) include Gadus “S” high performance, multi purpose greases  and the latest extreme temperature “T” polyurea synthetic speciality greases designed for the most severe extreme-temperature and long-life applications.They have been designed to deliver the best value through long grease life, system efficiency, and enhanced wear protection enabling equipment operators to bebefit from Gadus greases' thickener type, oil viscosity, operating conditions and application and their NLGI grade (consistency) selecting the grease that will deliver optimum value to their operations. From greases that offer reliable performance for standard applications to specialist low noise, high-temperature and heavy-load greases,  there is a Shell Gadus product that can help to optimise your system’s efficiency and costs of operation.

For more information on SHELL® Gadus greases please refer to the Product Description section and the supplied documentation.

SHELL® TURBO® Turbine oils are premium quality lubricating oils designed to provide excellent lubrication of precision turbines and many other industrial applications. Made from severely hydroprocessed (API Group II) base oils carefully selected to provide satisfactory viscosity/temperature characteristics, low foaming tendencies and good water separation properties. In addition, they contain proven additives to protect equipment against rusting and to resist oxidation for long service life.

From high-temperature gas turbine systems to combined-cycle systems with integral gearing, the SHELL® TURBO® range of turbine mineral and  GTL (gas-toliquids) technology (*) oils are designed to protect the equipment from the effects of corrosion and to minimise the build-up of deposits and lacquer in turbine bearings and control valves.

Shell Turbo Oils T meet the American Standards Institute (ANSI)/American Gear Manufactures Association (AGMA) 9005-D94 requirements for R&O oils. They also coply with STLE Standards for machine tool lubrication include a classification for Hydraulic Fluid and General Purpose Lubricants.

The SHELL® TURBO® includes:

SHELL® Turbo T Mineral Turbine oils featuring reliable performance and protection. Available in ISO 32, 46, 68 and 100 viscosities.

SHELL® Turbo J Mineral Turbine oils  satisfying requirements of MHPS steam and gas turbines. Available in ISO 32 viscosity.

SHELL® Turbo S4 X and S4 GX GTL Turbine oils.The Turbo S4  X exhibits extended oil life and efficiency. Available in ISO 32 viscosity. The Turbo S4 GX is specifically formulated to provide additional protection for gearboxes in turbine systems that require enhanced anti-wear performance from oil . Available in ISO 32 and 46 viscosities.

For additional information please refer to the Product Description section and the supplied documentation.

(*) Shell gas-to-liquids (GTL) technology offering various benefits over traditional group II/III base oils such as a lower sulphur content than fluids derived from crude oil, a more uniform chemical structure, contributing to reliable performance and others.

SHELL® extensive range of automotive lubricants includes engine oils for a variety of applications in cars, motorcycles as well as trucks and light or heavy duty vechicles.

SHELL® HELIX Fully Synthetic Motor Oils are manufactured from 100% synthetic base stock and high quality additives to achieve higher performance levels than both synthetic technology and mineral oils. To these high-quality synthetic base oils SHELL® proprietary Active Cleansing Technology is added to create a motor oil that helps provide superior cleansing and protection for today’s engines. SHELL® HELIX oil types include Semi Synthetic Motor Oils, Mineral Motor Oils, High Mileage Oils, Diesel Motor Oils and  ECT Oils.

SHELL® ADVANCE portfolio of motorcycle engine oils consists of  4T, 2T motorcycle and scooter oils. Their key benefits include zero loss in horsepower, fuel economy and longer drain intervals.

SHELL® RIMULA Light Duty range of oils is designed for light duty trucks. With Dynamic Protection and Dynamic Protection Plus Technology (included in Grade LD5), they protect against engine wear and tear caused by each stop and start in daily operations. The high performance additive package contains anti-oxidation components for a longer oil life in vehicles operating under high idle engine conditions. Dispersants in the additive package help break down soot and deposit build-up regardless of the type of load carried.

SHELL® RIMULA Heavy Duty engine oils offer outstanding wear protection with reduced viscosity for improved fuel economy, acid and deposit protection and wear control.

Further information can be obtained through the supplied documentation.

A fuel water detector can be used in jet fuel to detect the presence in jet fuels of finely dispersed water that is undetectable by the eye offering assurance to the user that the industry limits for water-free jet fuel are maintained.

Developed by SHELL®  to address aircraft operational issues associated with ice formation in aircraft fuel tanks, SHELL® Water Detector is an easy-to-use, reliable and simple industry-standard test method that verifies that jet fuel meets the demanding aviation standards for water content. Using a syringe fitted with a Shell Water Detector capsule (sold seperately), it only takes a matter of moments to check the fuel at any stage of your delivery system. 

SHELL® Water Detector capsules are offered in boxes containing 8 tubes of 10 capsules (80 capsules in total) or in single tubes of 10 capsules each. SHELL® Water Detectors have a useful life of four to six months.

SHELL® SYRB5 Water Detector 5ml Syringe is all nylon with record nozzle suitable for both manual and automatic sampling. It features a new type push plunger to draw fuel sample into the syringe.

Please refer to the supplied documentation for additional information. 

The Silicon Microstructures SM5882 series of OEM pressure sensorscombines state-of-the-art pressure sensor technology with CMOS mixed signal processing technology to produce an amplified, fully conditioned, multi-order pressure and temperature compensated sensor in a small SO16 plastic package. The model SM5882 is designed for operating pressure ranges at 0.6 PSI and 1.5 PSI. Typically used in medical instrumentation, pneumatic control, gas flow and HVAC applications. 

Product Features

CMOS digital signal processor technology

Calibrated pressure available through I²C-Bus-Interface

Analog output signal ratiometric with supply voltage

Differential pressure applications with +/- pressure

EEPROM stored individual correction data

SO-16 package for surface mount

For additional information please refer to the supplied documentation.

CR SEALS power tranmission seals (formerly Chicago Rawhide) are included as an SKF brand  in the company's portfolio for radial and axial shaft sealing solutions in power transmission applications. CR Seals provide superior reliability and performance by retaining lubricants, excluding contaminants, and maintaining seal integrity under pressure. Both radial and axial shaft seals are offered in different series for oil and grease sealing applications. Please refer to Product Description for additional information.

Αutomatic lubrication systems  (aka lubricators) provide the appropriate lubrication quantity at the correct intervals, minimizing friction and wear and optimizing bearing and machinery service life. Automatic lubricators are installed on single lubrication points and automatically dispense the proper amount of lubricant to the application. Especially when lubrication points are difficult to access for safety reasons or their location in the plant, automatic lubricators can offer the solution.  Lincoln (part of SKF Group)  automatic lubrication systems and accessories' portfolio includes Centro-Matic®‚ Quicklub®‚ Modular Lube®‚ Helios®‚ Duo-Matic® and ORSCO® brands offering a solution for most lubrication points. Main benefits from the use of   Lincoln automatic lubricators include:

Increased worker safety for lubrication of difficult to access lubrication points,

Maintenance efficiency with automated lubricant supply,

Improved machine reliability with optimized lubricant supply,

Selection of lubricators type and lubricant for application needs from a wide product portfolio.

For additional information please consult the supplied documentation.

ZOK are powerful water-based gas turbine compressor cleaners and corrosion inhibitors produced by SOLIDUS INDUSTRIES. ZOK products are also offered with pH neutral and an effective corrosion inhibitor (ZOK 27) and with a higher pH without the added corrosion inhibitor (ZOK MX) for more challenging cleaning requirements. Originally developed for the UK Ministry of Defence over 40 years ago, ZOK 27 is used all over the world today within the Aviation, Marine, Power Generation, Oil and Gas and Industrial sectors. Regular on-line and off-line washing with ZOK 27 produces outstanding results in gas turbine engine performance: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – ultimately maximising the ROI on gas turbines.

ZOK 27 products are offered in two standards (ZOK 27 and ZOK 27 GOLD. The latter includes neutral, biodegradable, water-based gas turbine compressor and gas path cleaners specially formulated with plant based surfactants to meet ecological sustainability.

SOLIDUS INDUSTRIES ZOK 27 Gold Standard have been designed to meet the requirements of the OSPAR Convention for reduced environmental impact in sensitive marine environments, such as the North Sea. This scheme is administered by Cefas in the UK. They consist the perfect solution for maintaining peak performance of gas turbine compressors operating in ecologically sensitive environments. Regular on-line and off-line washing with ZOK 27 Gold Standard produces outstanding results: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – all this while minimising  environmental footprint.

ZOK 27 and ZOK 27 Gold Standard  are available as CONENTRATED (CNCTR) and READY TO USE (RTU) product versions in different packing options, 12.5 liters (3.3 USG) cans, 25 liters (6.6 USG) cans, 210 liters (55 USG) drums and 1000 liters (264 USG) IBC containers.

ZOK 27 READY TO USE (RTU) versions are intended for users who do not have access to demineralised water. CONENTRATED (CNCTR) vesrions can be diluted 1 to 4 with water before use (20% solution). Demineralised water (<11μS/cm conductivity) should be used for hot/on-line cleaning. Good quality drinking water (<500μS/cm conductivity) may be used for cold/off-line cleaning.

Please also refer to the attached documentation for additional information on these products.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.For more information on SWAGELOK® products please refer to the supplied documentation.

RAY ALLEN (RAC) R2S Rocker Switch provides a very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting and allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75" (44mm) x 1.0" (25mm) x 1.47" (37mm) deep. Self adhesive labels are not included. Sold separately.

TEKNOFIBRA® is a leading manufacturer of aircraft firewall, exhaust, electrical, fuel system heat and sound absorbing materials. TEKNOFIBRA® product range includes Heat Reflecting Panels, Sleeves, Contacts and Aluminum Adhesive Tapes. The impressive heat-reflecting and insulating characteristics of Teknofibra® products ensure resistance and protection, even at extreme temperatures. Their lightness (lighter in weight than competition) makes them the perfect insulation for aeronautical uses. The organic composition of Teknofibra® non-woven fabric guarantees maximum safety and non-toxicity in every situation. In the event of a fire, no harmful emissions are produced, preserving total safety. Sound absorbing Teknofibra® panels dramatically reduce excessive noise that can distract and compromise results. TEKNOFIBRA® products are widely used in the Aviation, Car Racing and Motorcycling fields.

Tempest® Spin EZ® FAA PMA approved aviation oil filters are manufactured by Aero Accessories®, LLC. Apart Spin-EZ® gasket oil filters the company also manufactures other pneumatic products such as Tornado™ dry air pump.

Product Features:

Improved Nut Welds – Nut welds are so strong that the can will distort without breaking the welds.Tempest Original filters can be installed without the danger of installation nuts falling off.

Improved By-Pass Valve for Continental® Engines – Meets TCM by-pass specification of 12-14 psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.

PC Housing (Patent Pending) – the only filter to incorporate a housing for the by-pass valve to prevent the restriction of the oil outlet should a failure of the by-pass valve occur.

Burst strength of 600 psi – Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Spin EZ oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.

Full Pleat Media – The resin-impregnated, cellulosic, full pleat media is designed for uniform flow and collapse resistance.  312 square inches is the most in aviation oil filters.

Tempest® Spin EZ® oil filters are sold individualy but also offered as economical, convenient, and easy to handle six and twelve packs. Spin EZ® Solid Lubricant, aTempest Spin EZ oil filter’s proprietary solid lubricant is also available allowing for easy removal of the filter. Unlike oil, grease or DC4 compound that leave the filter seemingly “bonded” to the engines mount pad, making it nearly impossible to remove, Tempest® Spin EZ solid lubricant won't extrude or squirt out from under the seal.

PLease consult the supplied documentation for additional information.

TEMPEST®, a TEMPEST AΕΡΟ GROUP™ affiliate, offers their Platinum Electronic Fluid Pump line with a range of electronic fuel pumps designed to replace many of the FACET® GOLD-FLO solid state fuel pumps. FAA/PMA certified, TEMPEST® operate in 14 to 28 volt systems of modern aircraft and use an internal high-flow filter element that can be easily replaced when specified by aircraft maintenance manuals. Use of TEMPEST® Platinum Electronic Fluid Pumps in most Cessna aircraft requires installation of tank modification SK421-26C service kit separately priced.

The pump filter element must be changed when specified by the aircraft maintenance manual or when the pump output/pressure diminishes (an event that may indicate a dirty clogged filter). A universal Filter Kit  P/N KIT-P1 is offered which fits all Aero Accessories Platinum Pumps and includes filter P/N 79729, gasket P/N 79136 & O-ring P/N 79139-2.

For additional information please refer to the supplied documentation.

The 317 type IC voltage regulators are adjustable 3-terminal positive voltage regulators capable of supplying in excess of 1.5 A over an output voltage range of 1.25 V to 37 V. Unlike other IC regulators designed to provide a fixed output voltage, 317 type IC voltage regulators are widely used adjustable positive voltage regulators available in many different packages intended for surface mounting on circuit boards. They are exceptionally easy to use and require only two external resistors to set the output voltage. For getting a stable output the input voltage must be 2 to 3 volt higher than the output.

The 317 type IC voltage regulators are offered by different manufacturers and can be used in commercial equipment and a variety of other applications including but not limited to those where there is a need for an  adjustable regulated power supply circuitry in a single chip providing 1.2V to 37V DC output voltage with up to 1.5A output current capability and very low external components. Furthermore, they also include many other features like short circuit protection, safe area and over heat protection making them essentially blow-out proof and long term performers. 

Product Features / Technical Specifications

Output current in excess of 1.5 Amps

Output voltage adjustable between 1.2V and 37V

Floating operation for high voltage applications

Internal thermal overload protection

Require low external components

Require only two external resistors for output adjustment

Capable of short circuit protection

Over heat shutdown function

Output transistor safe-area compensation

Standard 3-lead transistor packages

Low price

Reliable to use in commercial applications

Maximum input voltage is 40V DC

Low standby current

Indicative Applications

Voltage step down circuits

Lab power supplies

Battery Chargers

Solar Power Supplies

Microcontroller Related Applications

DC to DC converters

Portable Instruments

For additional information please refer to the supplied documentation.

Note: Depending on the availability of the above mentioned product/part at the time of order implementation, alternative products/parts may be supplied of equivalent features and specifications, subject to the prior notification and approval of the buyer.

Versatile split red master switch used in virtually all single engine Cessna models since 1970. It can be used in most light aircraft with single alternator systems. Left rocker normally is used for alternator and right half for battery. Amp Rating: 20. The swich housing mount (P/N: S1843-1) is sold separately and can only be ordered together with the switch.

Oval shaped copper sleeves used in making eye or lap splices in flexible cable. Sleeves are slipped over the two strands of cable to be fastened and are then compressed with special Nicropress hand squeezers. Provides a bond that is even stronger than a standard splice. They are offered in pure copper or zinc/tin coated for different cable sizes in inches. Plain copper ("18" series) and zinc coated sleeves ("28" series) are used with galvanized cable, and tin coated sleeves are to be used with stainless steel cable. 

TIMKEN® lock nuts and respective lock washers are used in the mounting of straight bore bearings on shafts. They are available for bearings in the various series. Their dimensions relate to the bearing bore sizes.

TIMKEN® lock nuts and respective lock washers are used in the mounting of straight bore bearings on shafts. They are available for bearings in the various series. Their dimensions relate to the bearing bore sizes.

TIMKEN® tapered roller bearings are characterized by reliability, versatility and choice. They stand up to extreme situations, including high-corrosive, high-temperature, vacuum or low-lubrication environments. Uniquely designed to manage both types of loads on rotating shafts and in housings and offer a choice of nearly 26,000 product combinations, from single, double to four-row configurations and thrust bearings. Each bearing contains four interdependent components: the cone (inner ring), the cup (outer ring), the tapered rollers (rolling elements) and the cage (roller retainer). Tapered angles allow bearings to efficiently control a combination of radial and thrust loads. The steeper the outer ring angle, the greater ability the bearing has to handle thrust loads. To provide a true rolling motion of the rollers on the raceways, the extensions of the raceways and the tapered surfaces of the rollers come together at a common point, the apex, on the axis of rotation.

TIMKEN® Single Row (TS) bearings are basic and most widely used. Usually fitted as one of an opposing pair. They can be “set” to the required clearance (endplay) or preload condition to optimize performance. TSF type bearings, a TS variation, have a flanged outer ring to facilitate axial location and accurately aligned seats in a through-bored housing.

TIMKEN® Double Row Outer Ring bearings (TDO)  have a one-piece (double) outer ring and two single inner rings. Usually supplied complete with an inner-ring spacer as a pre-set assembly. They offer a wide effective bearing spread and frequently chosen for applications where overturning moments are a significant load component. Other bearing types include TDI (double-row double inner race) and TDIT (same as TDI with tapered bore). Both comprise a double inner ring and two single outer rings. Usually supplied complete with an outerring spacer as a pre-set assembly. TDI and TDIT bearings can be used at fixed (locating) positions on rotating shaft applications. Offered types include: TNA (double-row non-adjustable), TNASW (same as TNA with lubricant slots) or TNASWE  (same as TNSW with extended back face rib). They are similar to the TDO with a one-piece (double) outer ring and two single inner rings.  Supplied with a built-in clearance to give a standard setting range, these bearings provide a solution for many fixed or floating bearing applications where optimum simplicity of assembly is required.

For aerospace applications, different FAA PMA approved tapered single roller bearings are offered including TIMKEN® 13600, 13800 and LM813000 Series with a cone assembly and a cup. Offered in "inch" and "metric" versions LM813000 Series feature  minimization of friction between the rotating parts, handling of thrust loads, even load distibution across the roller, heavy load carrying capacity & stamped steel cage.

For additional information please refer to the supplied documentation.

UNIFRAX® is the largest ceramic fiber producer worldwide with in-house paper-making capabilities. UNIFRAX® products include FIBERFRAX®Ceramic Fiber Insulation Blankets (S Durablanket 2300F and 2600F, Fibermax Blanket 3000F), FIBERFRAX® Ceramic Fiber Insulation Papers in different grades, FIBERFRAX® Ceramic Fiber Insulation Boards (Duraboard LD and HD 2300F, Duraboard 2600F and 3000F), FyreWrap Insulation Ducts (Elite Grease, Elite Air Distribution System (ADS), Dryer Protection System (DPS), Plenum and Cable) and High Temperature Textiles (Ceramic Cloths 2300F, Ceramic Tapes 2300F, Ceramic Square and Round Braids 2300F, Ceramic Twisted Ropes 2300F, Silica Textiles 2000F and Fiberglass Textiles 1000F. UNIFRAX® products are distributed by Thermal Products Company, Inc.

For FIBERFRAX® Ceramic Fiber Insulation Papers please consult the Product Description section and supplied documentation. Other products can also be supplied on demand. Please contact us.

The new and improved QUARTZ range  by TOTALENERGIES (formerly TOTAL) offers a comprehensive choice of engine oils for every vehicle including formulated oils for use in diesel engines and older vehicles. Three cutting-edge technological improvements enable better car engine care, protection and cleanliness while, at the same time, reducing maintenance costs and improving fuel economy.

ECO SCIENCE technology helps the engine to resist physical and chemical degradation for an extended engine life, while maximizing performance and scoring high in fuel economy.

AGE RESISTANCE technology (ART) prevents engine's  wear and tear, abrasion and oil oxidation even at extreme temperatures through a unique combination of hyperactive molecules and anti-wear additives.

CLEAN SHIELD technology integrated in QUARTZ engine oils captures all dirt, dust and soot in the engine, preventing sludge formation and ensuring cleanliness and reduced maintenance costs in the long run.

QUARTZ range of engine oils now features exciting new packaging. QUARTZ product range includes:

Quartz 9000, a synthetic oil providing superior levels of engine performance and protection. It also provides TOTALENERGIES' highest levels of engine cleanliness. Quartz 9000 is long-lasting, extending intervals between oil changes.

Quartz 7000, a synthetic-based oil that provides enhanced driving comfort and high levels of engine cleanliness and protection.

Quartz 5000, an improved mineral oil that can be used in older as well as more recent vehicles.

Quartz 3000, a mineral oil suitable for older cars that can't use other oils from the range.

Quartz INEO, a synthetic oil with pollution control, specially formulated for use with diesel engines. Quartz INEO provides exceptional engine cleanliness and supports particulate filter performance.

Quartz with ART  (age resistance technology) which improves the engine's ability to withstand mechanical ageing. 

Key benefits from the use of TOTALENERGIES QUARTZ engine oils include:

Protection against all the causes of wear by reducing friction and corrosion

Prevention of engine overheating

Ensuring good cylinder compression and maximum engine efficiency 

Ensuring engine cleanness by preventing the deposit of various impurities

Additional information are available in the Product Description section.

Note: Supplied information is provided for reference only. For the selection of the suitable motor oil please observe the manufacturer's instructions.

TOTALENERGIES (formerly TOTAL)  has developed a comprehensive range of Hydraulic Oils included in HYDRANSAFE product family. 

HYDRANSAFE HFA E3 and HFA S5 are intended for use in hydraulic systems in Aviation, Steel, Metalworking, Energy, Chemicals, Food processing, Textile, Automotive Manufacturing, Wood and Paper, Cement & Materials, & Mining sectors. Can be used on hot pressing machines and systems specially designed for low-viscosity aqueous fluids. Operating temperatures: +5 °C to +55 °C. HYDRANSAFE HFA E3 features an excellent stability overtime, good antiwear properties, excellent anti foam properties, good anti-corrosion, anti-rust properties even with a soft water, and good resistance to bacterial growth. HYDRANSAFE  HFA-S5 solution has a very low foam tendency and is compatible with the usual type of elastomers used in HFA type of hydraulic installations (ISO 6072 NBR and FKM). Provides excellent protection against corrosion to metals normally used in hydraulic systems (ISO IP 287) and features a high resistance to bacterial and fungal growth. Its durability reduces maintenance - with service intervals longer than mineral oil based HFA emulsions (type HFAE fluids).

HYDRANSAFE HFC-E 46 & HFC-E 68 are non flammable (fire resistant) & biodegradable  water based hydraulic fluids, boosted in antiwear and anti corrosion additives to match mineral based performances on pump tests and replace standard mineral oils with equal equipment protection. Both are intended for use in applications in Steel, Automotive Manufacturing, Mining, Aluminium, Construction Equipment and Mining industries. Designed to work on all kind of hydraulics pumps in various conditions, in mobile and stationary equipment. Ultimately biodegradable to facilitate usage in sensitive areas such as undergournd mining, agriculture, tunelling etc. they provide superior fire protection compared with standard HM or HFDU oils without compromising mechanical performances. They absorb water enabling usage in environments subject to high water contamination.

HYDRANSAFE HFDU 46, HFDU 68, and HFDU LC 168 Biodegradable hydraulic oils are recommended in the event of incidental leaks into the environment. They feature  considerable fire resistance, and exceptional lubricating properties which guarantee a substantial reduction in wear, and therefore a longer service life of the hydraulic components. They exhibit a high flash point and high spontaneous ignition temperature, low pour-point providing good performances at low temperature, very good anticorrosion properties enhanced service life, and a very high natural viscosity index guaranteeing a viscosity constantly adapted to the temperature range in which the fluid must be used. Operating temperature: -10 °C to +70 °C on a continuous basis, +120 °C at peak periods.

For additional information please consult the Product Description section and the supplied documentation.

TRELLEBORG offers a wide range of hydraulic scrapers and wipers in metal, elastomer as well as Turcon® Polytetrafluoroethylene (PTFE) based or Zurcon® polyurethane materials specially engineered for hydraulic cylinder applications with excellent low-friction properties providing exceptional resistance to wear. A hydraulic wiper or scraper prevents contamination of the hydraulic medium that could damage wear rings, seals and other components. They are installed in sealing configurations in hydraulic cylinders to scrape dirt, foreign particles, chips or moisture from the rod of a hydraulic cylinder as it retracts into the hydraulic system.

TRELLEBORG Turcon® and Zurcon® Excluders are Trelleborg proprietary design based double-acting hydraulic scrapers with matching o-rings or without o-rings.TRELLEBORG Turcon® Excluder® 2  double-acting o-ring energized hydraulic scrapers have two functions: a) to scrape contaminants from the retracting piston rod to prevent soiling of the system and b) to hold back the residual oil film on the extending piston rod on the medium side. The o-ring maintains the pressure while the Excluder® 2 performs the scraper function. Excellent sliding properties and stick-slip free. 

TRELLEBORG Turcon® and Zurcon® Excluders are offered in Metric or Inch versions, in different sizes either as sets with matching o-rings or without o-rings. Metric version includes sizes 10 mm to 240 mm. Operating conditions: Temperature: -35 °C to 100 °C,  Speed (max):1 m/s. Appearing prices of Turcon® and Zurcon® Excluders relate to sets of scrapers and o-rings unless otherwise specified. 

Please refer to the description of individual products for additional information and the attached Part Number Guide for Aerospace applications.

TRELLEBORG o-rings are widely used seals as they are efficient and economical and can be used in a wide variety of static and dynamic applications to seal practically all liquid and gaseous media.They are available in elastomeric and other materials including (among others) EPDM, FKM and NBR, offered in sizes from 10 mm to 250 mm and suitable for use in operating conditions of -40 °C to 200 °C & 25 MPa max pressure. The o-rings are used predominantly for static sealing applications as a radial static seal, e.g. for bushings,covers,pipes,cylinders,rods or as an axial static seal, e.g. for flanges,plates,caps. Their applications include from repairs or maintenance to quality assured sealing applications in aerospace,automotive or general engineering.Compared with other sealing elements,the TRELLEBORG o-rings have a wide range of advantages:

- Simple,one-piece groove design reduces hardware and design costs

- Compact design allows smaller hardware

- Easy, failsafe installation reduces risk

- Applicable to a wide range of sealing problems: static, dynamic, single- or double-acting

- Wide compound choice for compatibility with most fluids

- Ex-stock availability of many sizes worldwide for easy maintenance and repair

Please refer to the attached Aerospace Part Number Guide.

ATA-29 Hydraulic Power Service Units (HPUs) are multipurpose equipment, used for loading hydraulic oil in the aircraft or engine tanks, but also, allowing the aircraft actuators to be moved through their equipped high-pressure pumps and appropriate adapters for such effect. They also have filter lines to ensure that the liquid is not contaminated.

TRONAIR® offers ATA 29 Hydraulic Power Units to meet specific aircraft requirements including those of commercial, regional, and business airlines which use TRONAIR® HPUs to reduce aircraft filter changes and increase aircraft component life. TRONAIR® ATA 29 HPUs have the best high-grade filtration in the industry. TRONAIR® HPUs are available in different series and various configurations. Despite their differences all HPUs are powered by a motor (the primary source of power), which in turn powers the main pump to circulate hydraulic fluid from the reservoir throughout the entire system. Typically, motors are electrically powered. However, a few are gas and diesel-driven for outdoor usage. Other HPU components include the hydraulic pump which controls both the flow and the pressure within the unit, the reservoir (the storage area for the hydraulic fluid), the regulators which control or "regulate" the pressure lines and the relief and pressure supply lines which keep the pressure inside the hydraulic power unit level.

For more information please consult the supplied documentation on TRONAIR® HPU Technical Specifications & Optional Features. 

Note: TRONAIR® ATA-29 Hydraulic Power Service Units (HPUs) are offered with or without CE marking (*). Listed HPUs are non CE rated. For CE rated versions please specify during ordering. 

(*) CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements. It is required for products manufactured anywhere in the world that are marketed in the EU.

TYCO ELECTRONICS TE CONNECTIVITY™ SOLISTRAND Series Terminals & Splices are specially designed to terminate solid and stranded wire, irregular-shaped conductors, and wire-conductor combinations while still retaining the superior performance characteristics of single-purpose terminals and splices. The series resists corrosion and vibration, and the tensile strength is well within the limits of commercial and military specifications. TE Connectivity offers SOLISTRAND crimping tools to ensure terminations are consistent and uniform for easier quality control and reliable performance. The TE SOLISTRAND line includes terminals, parallel and butt splices, flat rings, spades, hooks, and flanged tongue terminals in sizes from 26AWG (0.1mm2) through 600 MCM (304mm2).

Features & Benefits

SOLISTRAND terminals and splices are constructed of fine grade high conductivity copper for optimal electrical performance

The brazed seam increases metal strength around the entire barrel area assuring withstanding harsh industrial environments. It also prevents pinched and stubbed wires

The “W” crimp – two longitudinal crimps – and the dimples or serrations inside the wire barrel  offer maximum electrical contact area after crimping and higher tensile strength. This permits the use of a shorter barrel, which end up in a smaller form factor and makes it more cost effective

Bell mouth on barrel entrance makes insertion of wires easier and reduces installation time and increasing production yield

Most SOLISTRAND terminals and splices meet or exceed the requirements of SAE AS7928, Type I, Class 1 and 2. Aircraft-, defense- and marine (related) equipment base their performance requirements on AS7928

Rated for up to 170°C maximum and therefore suitable in all standard applications.

Applications

Pad- and pole-mount transformers

Power supplies

Motors

Switchgear

Telecommunications

Appliances

Panel boxes

Heavy equipment

Instruments/control

Transportation

For additional information please refer to the supplied documentation.

TE CONNECTIVITY (AMP) solderless electrical terminals and splices meet and exceed today's requirements for reliable terminals in applications ranging from control circuits to heavy duty power wiring. The butt type splices are available in different colors and wire sizes (AWG). Appearing sizes are in inches. 

TE CONNECTIVITY™ AMP family of products includes industry-leading connectors, components, cables, and tooling used to transmit data, power, and signal in the machines, devices, and systems helping to make the world safer, sustainable, productive and connected.

TE CONNECTIVITY™ AMP connectors are offered in a wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification and MIL-C-81659. They are avialable in Commercial,  Military and Miniature Series with the following designations.

Commercial Series

R — Unsealed

RM — Interface seal on pin insert

RME — Environmentally sealed

Unkeyed Single-Insert Series

RMA — Standard size, unkeyed single-insert connectors, unsealed

RMAE — same as RMA, except sealed

Military Series

M — MIL qualified, unsealed

MM — MIL qualified, interface seal on pin inserts

MME — MIL qualified, environmentally sealed

Miniature Series

RA — Unsealed

RE — Sealed

Special connectors are also available—including connectors for flexible flat cable, for wire wrap-type terminations, and with contacts for board-mount applications.

For additional information please refer to the supplied documentation.

Note: Special Order items. Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Contact us. 

Bi-metallic single toggle thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 50 amp ratings may be used as on/off switch. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Lightweight, less than 2 oz.

0.5 amp to 50 amp ratings may be used as on/off switch.

Cannot be reset against overload.

Screw termination.

Trip-free operation.

Bi-metallic push to reset only thermal circuit breakers suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. 0.5 amp to 30 amp ratings. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Product Features:

Push To Reset Only

0.5 amp to 30 amp ratings.

Cannot be manually tripped.

Button extends for visual trip indication.

Push button to reset breaker.

90 Degree Screw-On Terminals

These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz). 

Product Features:

Lightweight, less than 2 oz.

Push/Pull Actuator Thermal Circuit Breaker

0.5 amp to 50 amp ratings may be used as on/off switch

Cannot be reset against overload

W23 has visible trip indicator

Screw termination

Trip-free operation

Nylon Insulated Diamond Grip (PIDG) Knife Disconnect Splices with body plating of copper, tin and wire insulation support. Offered in different models for respective use with wire insulation diameters.Two required per assembly.

TYCO ELECTRONICS TE CONNECTIVITY™ PIDG ring tongue terminals  are available in different colors, wire sizes (AWG) and stud sizes. Appearing sizes are in inches. Each TE CONNECTIVITY™ insulated terminal consists of a tin plated copper body, a tin plated copper wire support sleeve and a color-coded insulation sleeve. They meet respective MIL specification.

TYCO ELECTRONICS TE CONNECTIVITY™ ARINC 600 Connectors feature a stamped and formed contact system versus the traditional, screw machined contact system. Available in either Solder Tail or Press-fit (eye of the needle) designs.

Being the first to offer size 22 contacts in a press-fit PCB attachment style, their ARINC 600 product portfolio now includes press-fit size 20, 16 and 12 power contacts, as well as press-fit Quadrax contacts providing a total press-fit PCB-attach connector solution.

TE CONNECTIVITY™ ARINC 600 Connectors feature a lighter design for considerable cost savings. The stamped system allows for selective gold plating to only critical socket contact tines instead of the whole contact, decreasing gold plating costs. By changing to hollow contacts instead of the solid contacts in the legacy design, this product design reduces weight by up to 10% (depending on insert arrangement) and includes backward compatibility. All these with the same high levels of performance and reliability.

Features & Benefits

Completely inter-mateable with existing ARINC 600 plug connectors

"Monoblock" single-piece inserts that simplify the manufacturing process, cut costs

Stamped and formed, selectively plated size 22 contacts provide substantial cost savings while delivering excellent performance and reliability

Equivalent electrical performance vs. current design

Available in either Solder Tail or Press-fit (eye of the needle) designs

Up to 10% weight savings per connector (depending on insert arrangement)

Applications

• In-Flight Entertainment

• In-Flight Networks

• Flight Controls and Communication

• Military Ground Vehicles

For additional information please refer to the supplied documentation.

Note: TYCO ELECTRONICS TE CONNECTIVITY™ ARINC 600 Connectors are Special Order items and therefore Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Please contact us. 

TYCO ELECTRONICS TE CONNECTIVITY™ STRATO-THERM Terminals and Splices are specially designed for High Temperature applications up to 1200°F [649°C]. If heat is an unavoidable dimension in the circuit design and production STRATO-THERM terminals and splices consist the right choice also addressing other more familiar circuit problems such as vibration, corrosion and flash-over, when they occur at high temperatures.

Different types of high temperature terminals and splices in  STRATO-THERM series include:

PIDG Terminals and Splices, and Pre-Insulated Spare Wire Caps — 550°F [288°C] range

PIDG Insulation Restriction Terminals — 550°F [288°C] range

Post-Insulated Terminals and Splices — 550°F [288°C] range

Uninsulated Terminals and Splices — 650°F [343°C] range

Uninsulated Terminals and Splices — 1200°F [649°C] range

All five types of STRATO-THERM terminals and splices provide optimum corrosion and vibration resistance plus outstanding tensile characteristics.

All types, except the STRATO-THERM PIDG terminals, splices and preinsulated spare wire caps, employ the famous “W” crimp which creates the precise electromechanical properties necessary for solid and/or stranded conductor combinations.

Main features and benefits include:

- Available in temperature ranges of 500°F [260°C], 550°F [288°C], 650°F [343°C] and 1200°F [649°C]

- Employ the “W” and “C” crimp

- Wide range of wire sizes

- Complete line of related application tooling

- Accommodate solid and/or stranded conductors

For additional information please refer to the supplied documentation.

Lubrication fittings of Aerospace (AS15000) / Military (MS) MS15000 series. Surface Check fittings of the MS15000 series have spring-loaded ball check in the tip.

Military Specification MS35058 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).

Military Specification MS35059 Series Toggle Switches can be used to upgrade your aircraft's cockpit controls. These heavy-duty metal switches have a standard shape that works well for a variety of applications can be used for most components that only function in either the on or off positions. They are available in several sizes to fit your particular airplane and are shipped with all necessary rings and hardware for installation. Toggle switches are available with two or three operating positions, 1 or 3 hole mounting and a variety of circuitry & electrical ratings. Contacts are made of solid silver. Wide usage is found in aircraft, mobile, marine, electronic and industrial applications. Available in full "AN" standard size & Ultra Miniature 1/2" size, contact types and circuit codes (see reference chart).

The P1 momentary switch is a sealed, dustproof, snap action, MIL qualified switch ideal for switching low level up to 10 amps. It features screw terminals, and includes screws, lockwashers, and solder lugs.

Product Features:

MIL qualified 

Dustproof, snap action, screw terminals, rugged reliable construction

Threaded or Press Fit Bezel with Black, Red or White Color Button (depending on selected model)

Button sealed with patented “rolling sleeve” principle

Contact area sealed at button & terminals

Less than 25mOhm contact resistance

Ideal for low level switching as well as up to 10 amp duty

Positive tactile feedback

Product Specifications:

Electrical: (at 28VDC or 115VAC, 60/400 Hz.)

Load / Amperes / Life (Normal)

Resistive / 10 / 25,000 cycles

Inductive/Motor / 5 / 25,000 cycles

Lamp / 5 / 25,000 cycles

AMP Flexi Block Modular Terminal is used for assembles of terminal blocks to custom requirements and it is avalable in Users and Professional complete kits. 

Users Kit consists of 25 pieces Flexi-BLock terminal block, 12 end stops and two 12 in pieces of track,

Professional Kit - No. 6 kit consists of 100 ea. P/N 604101-1 block assemblies, 25 ea. of P/N 604111-1 end stops and 2 ea. track 3 ft. long.

MONADNΟCK floating clip nuts  are high strength forged hex nuts suitable for structural and non-structural applications in metal, plastic and composite materials. Made of carbon steel, heat treated, cad plated per QQ-P-416, type II, class 2.