TE CONNECTIVITY (AMP) solderless electrical terminals and splices meet and exceed today's requirements for reliable terminals in applications ranging from control circuits to heavy duty power wiring. The butt type splices are available in different colors and wire sizes (AWG). Appearing sizes are in inches.
YAESU rechargable batteries are intended for use with YAESU handheld transceivers.
Integral fuel tanks in aircraft form part of their wing or fuselage structure and they are commonly met in high-performance aircraft as they are the lightest, with most space per unit of weight. Rigid removable aircraft fuel tanks are also used in some aircraft, typically made of stainless steel or aluminum alloy and riveted together. Flexible fuel tanks (aka fuel bladders) are fuel containers made of reinforced flexible materials. They share many characteristics with rigid tanks but they require a smaller opening in the aircraft to be installed. Also used in other sectors for rapid deployment of storage facilities or increase capacity of fuels (gasoline, diesel or jet fuel) but also for water, oils, or as emergency units. They are made of high-quality PVC, EVA, and TPU (Thermoplastic Polyurethane) coated fabrics, are fully UV resistant, and can operate at temperatures from -50°C to +90°C, ensuring durability and reliability under the most demanding conditions. Made by different manufacturers, these tanks conform to commercial standards while some of them are ballistic-tolerant or engineered for mission-critical military or aerospace uses, meeting respective commercial (such as TSO-C80 and 14 CFR Part 29) as well as military specifications like MIL-DTL-6396, MIL-DTL-5578, and MIL-DTL-27422.
Related materials such as tank cleaners/degreasers, adhesives & sealants are also offered and included in this presentation.
Tank adhesives/sealants come in different compounds (chemical composition) and respective prices, and their selection heavily depends the material of the tank they shall be applied and the sealing content (water, oil, fuel, etc). The selection and use of any sealant during tank construction, maintenance or repair should always ensure sealant's compatibility with tank composition and chemical resistance to fuels or other fluids to be sealed. Commonly used sealants for tanks span from PVC, the more cost-effective but with low temperature resistance & toxic when burned, to more expensive but safer Silicone ones, with excellent flexibility, high and low-temperature resistance and biocompatibility, to Polyurethane sealants, durable but not so chemically resistant as Polysulfide, and Polysulfide rubber sealants, flexible, and extremely resistant to gasoline, ethanol and many other chemicals.
For aircraft integral fuel tanks and rigid removable fuel tanks made of metals, two-part Polysulfide sealants are often the preferred choice. For flexible Polyurethane/Thermoplastic Polyurethane (PU/TPU) fuel tanks (bladders) the bonding/sealing material itself is often a specialized PU/TPU formulation for enhanced flexibility and durability,chemical resistance to hydrocarbon fuels, solvents, and oils, impact resistance, and bonding strength compared to traditional formulations. Silicone sealants are also used depending on application requirements.
Supplied either as OEM parts or as parts of our own labelled (AVIATIONEU NEW ERA) product lines.
DONALDSON® is a leading world-wide filter supplier for commercial jets, military vehicles, off-road equipment, trucks, light-duty vehicles, power plants, dust collectors, industrial compressors and more. The company is the OEM for FAA-PMA air filters installed in Cessna (all SE piston models), Piper (turbo charged aircraft), Beechcraft, Maule & Mooney aircraft delivering consistent and reliable performance.
Product Features:
Selection: Over 75 filter models for Cessna, Beech, Maule, Mooney, Piper and other aircraft.
Easy Installation & Maintenance: No removable parts or oil, may be washed with water.
Better Airflow: In laboratory airflow tests comparing DONALDSON®, Bracket and Challenger Aviation (K&N) filters for Cessna 172 aircraft, DONALDSON® had the lowest restriction (best airflow). The reasons for this include:
• Filter media is composed of synthetic fibers
• Evenly distributed uniform size and shape media fibers
• More media area and less frame
• Deeper filter pleats
• No oil
Stop more dirt and protect the engine better: They achieve 98.5% or greater filtration efficiency according to ISO5011 fine and coarse dust requirements, greatly exceeding the other filters.
Long Lasting: rated to last 500 hours, five to 10 times longer than foam filters. Replacement after three years, five cleanings or 500 flight hours, whichever occurs first.
OEM and FAA-PMA Certified: Designed to manufacturer specifications, DONALDSON® filters don not require STCs .
Thoroughly Tested: Third party lab tests show Donaldson filters meet or exceed FAA fire safety regulation per FAR 25.853 and FAR 23.1107 Induction system filters.
Please refer to the attached documentation on the application of DONALDSON® filters in different aircraft/models.
Stainless Steel alloy 13-8 PH (UNS S13800) is a martensitic precipitation-hardening stainless steel alloy featuring excellent strength, high hardness, superior toughness, and good corrosion resistance. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content,and vacuum melting.
The chemical composition includes Chromium (Cr) 12.25-13.25%, Nickel (Ni) 7.5-8.5%, Molybdenum (Mo) 2.0-2.5%, Aluminum (Al) 0.90-1.35% as content weight with other metals covering the balance. This alloy is double melted in a Vacuum Induction Furnace followed by Consumable Electrode Vacuum Melt (VIM-VAR). In some cases, a second melting by Electroslag Remelting (ESR) is implemented. It is weldable (inert gas shielding with Helium is preferred). Corrosion resistance is similar to 304 Stainless, with greatest resistance in the fully hardened conditions. Stainless Steel 13-8 PH comes in different shapes mostly in bars/rods, wires, forgings, rings and extrusions but also in sheets or plates.
Stainless steel 13-8 Mo is used in a range of applications including pins, valves, shafts, screws and bolts, missile components, fittings and fasteners, injection molding equipment, nuclear and petrochemical industry equipment as well as aircraft components such as engine, landing gear and structural sections.
Stainless Steel 13-8 PH grade round bars/rods are offered as part of AVIATIONEU NEW ERA product lines. Sourced by quality producers, these bars/rods are offered in Condition A (Annealed) and in different diameters in inches and pre cut lengths in inches or feet. They meet different specifications such as AMS -5629 or ASTM -A564. For additional information, please refer to the supplied documentation or contact us.
AS81820 Standard bearings are Plain Self-Aligning, Self-Lubricating ,Low Speed bearings with a -65 TO +325 °F temperature operating range offered in different specifications with those of SAE AS Standard superseding the Military Standard respective parts. AS81820 Standard bearings include AS14101/MS14101 narrow, grooved race, AS14102/MS14102 wide, chamfered race, AS14103/MS14103 wide, grooved race, and AS14104/MS14104 narrow, chamfered race.
AS14101/MS14101 and AS14104/MS14104 bearings included in this presentation are offered as OEM parts by different manufacturers including RBC® BEARINGS, NEW HAMPSHIRE BALL BEARINGS® (NHBB), AURORA BEARING COMPANY® and others as well as their replacements by NATIONAL PRECISION BEARING® (NPB).
SAE-AS14102 and SAE-AS14103 (separately listed) supersede those of MS14102 and MS14103 specifications. They are both are wide plain spherical bearings, self lubricating self aligning, and low speed, designed for operation in high temperature environments (-65°F to +325°F or -53.9°C to +162.8°C). Their inner and outer rings are made from Corrosion Resistant Steel (CRES). AS14102/MS14102 series bearings come with a chamfered outer ring while those of AS14103/MS14103 series come with a grooved outer ring. They are offered as either OEM parts from RBC® BEARINGS or as part of our separately listed own label (AVIATIONEU NEW ERA) product lines sourced from quality manufacturers.
For more information please refer to the Product Description section and other supplied documentation.
PHILLIPS 66® Company is among the largest refiners in the U.S, a major contract jet and avgas fuel supplier to private, commercial, and military aviation and a producer of industrial oils. The Phillips 66® line of aviation lubricants approved by the FAA and leading engine manufacturers includes premium single and multiviscosity piston engine oils and highest quality hydraulic fluids compatible with other brands. They can be used in diverse climatic conditions. PHILLIPS 66® protective additive packages exceed industry specifications.
Some of PHILLIPS 66® aviation lubricants listed below are offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the Product Description section, the supplied documentation or contact us.
PHILLIPS 66® X/C® Aviation Oil, Ashless Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines
PHILLIPS 66® VICTORY® Aviation Oils
VICTORY® Aviation Oil 100AW, Ashless Dispersant, Single-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)
VICTORY® Aviation Oil AW 20W-50, Ashless Dispersant, Multi-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)
VICTORY® DIESEL Aviation Oil 10W-40, Fully Synthetic Aviation Engine Oil for Aircraft Compression Ignition Engines
PHILLIPS 66® TYPE A Aviation Oil, Ashless Dispersant, Single-Grade Engine Oil for Aircraft Piston Engines. Available in two grades, 100AD (SAE 50) and 120AD (SAE 60)
PHILLIPS 66® TYPE M Aviation Oil, Non-Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines
PHILLIPS 66® Reference Oil 50
PHILLIPS 66® Food Grade White Mineral Oil for use in food processing plants, consumer products, and in other applications.
CMM Series male-to-male in-line check valve with compact overall length. CMM check valves are available in brass, steel and stainless steel and in different sizes.
Honeywell is a leading switch and sensor provider for many HVAC applications, including airflow, VAV control, boiler/chillers, motors, and more. Products include pressure sensors, digital humidity/temperature sensors, magnetic position sensor ICs, current sensors, pressure switches, basic switches, and more.
Honeywell's MICRO SWITCH switches fill many roles in a wide range of applications, including presence/absence/positioning, inspection/recognition, condition measurement, and operator/machine interface. They range from sealed switches used in high temperature aerospace applications to large cable-pull switches ensuring safety on conveyors.
Honeywell's snap-action basic switches are simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions.
Honeywell's Standard families of Basic and Miniature switches include V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.
The Premium families of MICRO SWITCH Large and Subminiature switches are designed for high-precision applications where the cost of a switch failing is high maintaining enhanced accuracy and repeatability. MICRO SWITCH premium basic switches are offered in different series, they feature precise and accurate characteristics. Available in large, miniature, and subminiature switch sizes, MICRO SWITCH premium basics are customizable to provide unique actuators, different terminal combinations, custom characteristics, and even value-added wires… to meet customers’ application requirements. With many Honeywell premium basics, they are tested and certified to a higher cycle count.
SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance.
SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.
SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.
AEROSHELL® Turbine Oil 308 is a 3 mm2/s synthetic ester oil incorporating additives to improve resistance to oxidation and corrosion and to minimise wear. It was developed specifically for use in particular models of aircraft turbo-prop and turbo-jet engines for which a MIL-PRF- 7808 (formerly MIL-L-7808) oil is required. AEROSHELL® 308 turbine oil contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.
Product Specifications/Approvals:
US – Approved MIL-PRF-7808L Grade 3
Nato Code O-148
Joint Service Designation – Equivalent OX-9
Airbus Helicopters CM CM0113
NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to our AEROSHELL® Aviation Lubricants Product Overview presentation or contact us for additional information or assistance on non listed products.
CORROSION TECHNOLOGIES manufactures a complete line of anti-corrosion, cleaning and maintenance, and other specialty chemical products and application equipment, including the CorrosionX® line of corrosion prevention and lubrication products. Their products are intended for an extensive range of uses (from military, aviation and aerospace, marine, automotive and RV, to industrial, agricultural, soil stabilization and dust suppression, sporting goods, R/C, firearms, fishing and home improvement / general purpose). Apart from CorrosionX®, other brands include RejeX® high gloss finishes, ReelX® fishing reel lubricants, SpeedX® extreme pressure lubricants and Ground Glue™ for soil stabilization, erosion and dust control.
CORROSION TECHNOLOGIES CorrosionX® MIL-PRF-81309H Type II & IV Aviation Corrosion Prevention & Control Compound is specially formulated to displace moisture, stop corrosion instantly and provide long-lasting protection. Intended for use on airframes and general purpose uses.
CORROSION TECHNOLOGIES range of firearm cleaning and maintenance products for military and shooting sports' applications include CorrosionX® Mil Spec "Ultimate CLP" for firearms of all kinds, providing nearly 2X the load carrying capacity and more corrosion protection than any other firearm lubricant, Bore Cleaner, a Mil Spec quality gun bore cleaner and powder solvent, CorrosionX® Extended Duty (XD), a medium build corrosion preventive coating and CorrosionX® Heavy Duty (HD) corrosion preventive coating as well as CorrosionX® Grease a high-specification, high load bearing grease
For additional information please consult the Product Description section & the supplied documentation.
Tempest® Spin EZ® FAA PMA approved aviation oil filters are manufactured by Aero Accessories®, LLC. Apart Spin-EZ® gasket oil filters the company also manufactures other pneumatic products such as Tornado™ dry air pump.
Product Features:
Improved Nut Welds – Nut welds are so strong that the can will distort without breaking the welds.Tempest Original filters can be installed without the danger of installation nuts falling off.
Improved By-Pass Valve for Continental® Engines – Meets TCM by-pass specification of 12-14 psi, reducing risk of premature bypass that can result in unfiltered oil flowing to your engine.
PC Housing (Patent Pending) – the only filter to incorporate a housing for the by-pass valve to prevent the restriction of the oil outlet should a failure of the by-pass valve occur.
Burst strength of 600 psi – Significant improvements to the roll seam process used on the bottom of the can substantially improved the design burst strength of the Tempest Spin EZ oil filter to over 600 pounds per square inch, exceeding the ARP 1400 standard by 50 percent. Extra strength gives added assurance that Tempest oil filters are made to withstand the harshest operating conditions.
Full Pleat Media – The resin-impregnated, cellulosic, full pleat media is designed for uniform flow and collapse resistance. 312 square inches is the most in aviation oil filters.
Tempest® Spin EZ® oil filters are sold individualy but also offered as economical, convenient, and easy to handle six and twelve packs. Spin EZ® Solid Lubricant, aTempest Spin EZ oil filter’s proprietary solid lubricant is also available allowing for easy removal of the filter. Unlike oil, grease or DC4 compound that leave the filter seemingly “bonded” to the engines mount pad, making it nearly impossible to remove, Tempest® Spin EZ solid lubricant won't extrude or squirt out from under the seal.
PLease consult the supplied documentation for additional information.
ARPOL AEROSPACE manufactures high-performing lubricants, oils, greases, and solvents for the aerospace industry, both military and commercial, but also for uses in land and marine applications. Their products adhere to stringent requirements and specifications designed to keep aircraft well-maintained. Packaged in accordance with unique military requirements, they include national stock numbers (NSNs), and appear on the U.S. Qualified Products List (QPL). ARPOL AEROSPACE products conform to a number of OEM, MIL, SAE, DEF STAN, and NATO code. Available in different packaging options (1 USQT, 1 USG/5USG Cans & 55 UEG Drums). For additional information on specific ARPOL AEROSPACE products please consult the Product Description section and the supplied documentation.
AVIATIONEU NEW ERA Stainless Steel Plain Washers are made of Stainless Steel 304 or 316 (depending on P/N) with a bright surface treatment. They are produced in accordance with DIN 9021 standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm. Sold in packs of 250 or 25 pieces depending on the size of the washers. The number of pieces included in each pack is mentioned after "PK" designation.
LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options.
A brief description of LUKOIL® lubricants which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.
Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.
AVIATIONEU NEW ERA Hexagon Bolts are made of Stainless Steel 304/316 (depending on the P/N) with a bright surface treatment and a strength class of A2-70 for SS 304 bolts and A4-70 for SS 316 bolts. They are fully threaded, coarse type, and produced by certified manufacturers in accordance with DIN 933 standard. They are offered in competitive prices in different diameters ("M" designated), indicating the bolt's diameter in mm and lengths in mm. The thread pitch (the distance between threads measured along the length of the bolt) expressed in mm is indicated by the "P" designation in the P/N. Sold in packs of 250, 100 or 25 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.
Tubes, sleeves and fittings from various plastic materials such as Polyethylene (PE), Polyurethane (PU), Polyamide (Nylon, PA), Polypropylene (PP) or Polyvinyl Chloride (PVC)) are used in aerospace and many other industrial sectors for a range of hydraulic, pneumatic, instrumentation, insulation and other applications.
Plastic tubes sleeves combine durability and flexibility with low cost and light weight. Depending on the selected tube/sleeve, and intended use, they have resistance properties such as chemical, abrasion, kink, wear and tear resistance, heat resistance, electrical insulation, biocompatibility, and others. Plastic tube fittings come in various configurations, including straight connectors, elbows, tees, and adapters. Common applications include those involving corrosive substances and others where weight reduction is crucial.
Tubes intended for electrical Insulation in aerospace are typically made of polyvinyl chloride (PVC) and conform with MIL-I-7444 and SAE-AMS-I-7444 standards. They are rigid or flexible tubes with uniform inside and outside diameters in the length, specifically designed to prevent any undesirable flow of current between conductors and other objects.They are used on electrical insulation applications requiring flexibility at low temperatures.
Sourced from leading manufacturers, plastc tubes/sleeves and related fittings are offered in different sizes to meet application requirements and sold in rolls (in the case of tubes or sleeves) or pieces and packs (in the case of fittings).
For additional information on the supplied products please refer to the Product Description section, the respective documentation included in the Attachment section or contact us.
NAS538 Series bushings are flanged, press fit undersize inside diameter bushings offered as part of our own labelled (AVIATIONEU NEW ERA) product lines in different materials and finishes specified by the following material/finish codes in their part numbers:
- Alloy Steel, "P" Cadmium Plated
"B" Aluminum Bronze "A" Aluminum Coat
"C" Corrosion Resistant Steel Passivated
They are offered in different diameters and lengths in inches. Please refer to the specification table for additional information.
The EATON AEROQUIP FC300 are AQP elastomer hoses with a blue, abrasion-resistant fabric cover with single wire braid reinforcement over a synthetic rubber inner tube for longer life. The FC300 hoses are designed for high pressure fluid applications such as power steering, hydraulics, air, fuel, lubricating oils, fire resistant hydraulic fluids and other industrial fluids. They are also suitable for biodiesel use up to B20 and max temperature of 212°F (100°C). Available in different internal diameters in inches and for use in different maximum operating pressures (psi). Priced and sold by the foot.
Indicative Applications:
Power steering lines
Hydraulics
Air
Gasoline
Fuel
Lubricating oils
Over the wall air tool
Dot-approved air brake
Max operating pressure is 2250 psi
Operating Temperature Range
-55°F to +302°F (-49°C to +150°C)
Air not to exceed +250°F [+121°C]
Notes:
(1) The FC300 Hose only works with FC300 steel fittings (to be ordered separately). Easily assembles with a bench vise and/or wrenches.
(2) FC300-32 and FC300-40 hoses DO NOT meet SAE 100R5 pressure with reusable fittings. FC300-32 is rated to 350 psi with crimp fittings.
TE CONNECTIVITY (AMP) solderless electrical terminals and splices meet and exceed today's requirements for reliable terminals in applications ranging from control circuits to heavy duty power wiring. The butt type splices are available in different colors and wire sizes (AWG). Appearing sizes are in inches.
