At only 26 millimeters in height (1.024 inch) the new PowerBurst NG™ DayLite by AVEO ENGINEERING is a Nav/Position/Strobe light that does not sacrifice anything in performance or standards as other economy-priced lights offered by the competition.The exclusive and highly advanced optics and chrome reflector system, unmatched power and LED management circuitry, and AVEO 's famous lowest-drag profile in the industry are all combined into a product that gives you unmatched power and features. Lower, narrower and shorter PLUS much lighter than industry lights in this category. This is not a TSO certified light. Intended for experimental aircraft.

Product Features:

3-in-1 Nav/Position/Strobe

Extremely lightweight

Unmatched circuit technology

Waterproof

Vibration-proof

Shock-proof

Dust-proof

Limited 3yr Warranty - Product must be registered within 30 days of purchase Here

Product Specifications:

Dimensions (mm): 115 mm x 33 mm x 26 mm

Dimensions (inches): 4.547” x 1.302” x 1.024”

Weight: 70 g / 2.47 oz

Operating Voltage Range: 9 – 18 V DC

Input Current – Position / Nav - green (@14V): 0.28 A

Input Current – Position / Nav - red (@14V): 0.23 A

Input Current – Strobe (@14V): 2 A peak

Output Power - Position / Nav - green: 3.3 W

Output Power - Position / Nav - red: 2.5 W

Output Power - Strobe: 24 W peak

Honeywell is a leading switch and sensor provider for many HVAC applications, including airflow, VAV control, boiler/chillers, motors, and more.  Products include pressure sensors, digital humidity/temperature sensors, magnetic position sensor ICs, current sensors, pressure switches, basic switches, and more.

Honeywell's MICRO SWITCH switches fill many roles in a wide range of applications, including presence/absence/positioning, inspection/recognition, condition measurement, and operator/machine interface. They range from sealed switches used in high temperature aerospace applications to large cable-pull switches ensuring safety on conveyors.

Honeywell's snap-action basic switches are simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions. 

Honeywell's  Standard families of Basic and Miniature switches include V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.

The Premium families of MICRO SWITCH Large and Subminiature switches are designed for high-precision applications where the cost of a switch failing is high maintaining enhanced accuracy and repeatability. MICRO SWITCH premium basic switches are offered in different series, they feature precise and accurate characteristics. Available in large, miniature, and subminiature switch sizes, MICRO SWITCH premium basics are customizable to provide unique actuators, different terminal combinations, custom characteristics, and even value-added wires… to meet customers’ application requirements. With many Honeywell premium basics, they are tested and certified to a higher cycle count.

TYCO ELECTRONICS TE CONNECTIVITY™ PIDG ring tongue terminals  are available in different colors, wire sizes (AWG) and stud sizes. Appearing sizes are in inches. Each TE CONNECTIVITY™ insulated terminal consists of a tin plated copper body, a tin plated copper wire support sleeve and a color-coded insulation sleeve. They meet respective MIL specification.

The AL-1 series of Annunciator lights from ELECTRONICS INTERNATIONAL are more attractive, operate on less power and are smaller than the old fashioned indicator lights. These lights are an excellent indicator light for displaying boost pump on, gear status, power on, flags, etc. Also, they can be used as remote warning lights for any E.I. instrument featuring an external warning line. They are available in different light colors, operate on a 12 or 24-volt system and have a service life of over 1000 times that of incandescent bulbs. Mount hole: 5/16" . Size: .4" diameter x 1" depth. The come with 32" leads and E.I. documentation and certifications.

Elevate your aviation experience with Textron Aviation, your trusted source for top-tier aircraft batteries. CONCORDE® BATTERY CORPORATION, is a leader in high-quality lead-acid batteries, to power Cessna®, Beechcraft® and Hawker® aircraft. Their PLATINUM family of batteries offer superior engine starting performance, excellent charge acceptance, reliable essential power in the event of a generator failure, maintenance-free operation with no need for electrolyte or water addition, and advanced absorbed glass mat (AGM) separators.  CONCORDE® PLATINUM batteries are hazmat exempt and shipped fully charged and ready to install.

The  CONCORDE® RG® Series of premium hand made AGM aircraft batteries within the PLATINUM family are low resistance, valve regulated lead acid (VRLA) batteries providing excess power for many applications. The RG-25XC aircraft battery has the highest cranking power and capacity in the 25 Group.

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. They are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed and is available please mention during the order placement. In this case, additional cost may apply.

Inner tubes are also offered for tube type tires which generally share the same designation as the respective tire (e.g. a 5.00-5 inner tube fits a 5.00-5 tire) with exceptions when the inner tube can fit more than one aircraft tyre size (e.g. the 5.00-5 inner tube can be used in both the 5.00-5 as well as the 15×6.00-5 tires). Inner tubes are supplied with valves of different designs (e.g. straight or 90º bend valves) carrying respective designations. Accessories such as French Chalk, Valve Caps, and Cores are also available on request. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

Clip-Locking Turnbuckles utilize 2 locking clips instead of lock-wire for safety. The turnbuckle barrel and terminals are slotted lengthwise to accommodate the locking clips. After the proper cable tension is reached the barrel slots are aligned with the terminal slots and the clips are inserted. The curved ends of the locking clips expand and latch in the vertical slot in the center of the barrel. They are available for different cable diameters and thread sizes in inches covering desired minimum breaking strength requirements.

Different turnbuckle components listed below are used in turnbuckle assemblies. They are sold separately to meet application requirements. Please refer to the attached documentation.

MS21251 Series Barrels (superceding those of AN155 series)

MS21252  Series Fork Ends (superceding those of AN161 series)

MS21254 Series Pin Eye Ends (superceding those of AN165 series)

MS21255 Series Cable Eyes (superceding those of AN170)

MS21260 Series Cable Swage Ends (superceding those of AN669)

MS21256 Series Clips

The FIRST letters "R" or "L" following the dash number designate a RIGHT HAND THREAD or LEFT HAND THREAD respectively.

The SECOND letters "S" or "L" following the dash number indicate a SHORT LENGTH or LONG LENGTH respectively.

Different pins, rivet pins & collars used on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available are alternative respective parts from other manufacturers. HI-SHEAR HI-LOK™ pins and collars are catalogued as TEXTRON AVIATION part numbers but the alternative HI SHEAR part number is also included in the product reference number (SKU). When fasteners are sold in packs the specified number of pieces per pack is designated after the letters "PK" in the product SKU.

McFARLANE® AVIATION MS27975-1 fork rod end is internally threaded 1/4"-28 to fit threaded 1/4" diameter rod. Manufactured from 4130 steel. Used for engine controls.

KAMAN CORPORATION bearings include a wide range of spherical bearings, rod ends and journal bearings. 

KAMAN KAMATICS Metal-To-Metal Self-Lubricating Spherical Bearings are designed with conventional stainless steel alloys, or other specialized alloys based on application, temperature and environment and come with KAron™ self-lubricating liners. They  are maintenance free and provide increased reliability and longer application life, reducing operating cost in challenging applications across industries.  They are offered in different series outlined below, in inch and metric systems and used in a a variety of applications in  aerospace (commercial fixed wing aircrafts), engines,commercial and military helicopters, heavy industry, hydropower, or marine vehicles.

KR-CN Series. MS14104 qualified bearings, narrow, chamfered outer race, -65° F to +325° F

KR-CNG Series. MS14101 qualified bearings, narrow, grooved outer race, -65° F to +325° F

KR-CW Series. MS14102 qualified bearings, wide, chamfered outer race, -65° F to +325° F

KR-CWG Series. MS14103 qualified bearings, wide, grooved outer race, -65° F to +325° F

KR-CN/4 Series. MS81820/4 qualified bearings, lined bore, narrow, chamfered outer race, -65° F to +325° F

KR-CNG/1 Series. MS81820/1  qualified bearings, lined bore, narrow,  grooved outer race, -65° F to +325° F

KR-CW/2 Series. MS81820/2 qualified bearings, lined bore, wide, chamfered outer race, -65° F to +325° F

KR-CWG/3 Series. MS81820/3 qualified bearings, lined bore, wide, grooved outer race, -65° F to +325° F

KR-CE Series. Extended inner race bearings, high misalignment, chamfered outer race

KR-CEG Series. Extended inner race bearings, high misalignment, grooved outer race

KR-C Series. Miniature Series bearings, chamfered outer race

For additional information and specifications please refer to the supplied documentation.

START PAC® manufactures an extensive range of portable & mobile aircraft Ground Power Units (aka GPU) & starting battery packs used in different applications and operational scenarios, from supply of reliable mobile ground power for remote airstrips through to powerful hybrid solutions for fully high throughput Aircraft Maintenance, Repair & Overhaul operations. START PAC®’s product range includes GPU providing clean power for both maintenance and engine starting aircraft on the ground, a range of  of starting units with high power batteries and over voltage protection relays capable of starting any type of electrically started engine, power supply units to power up your aircraft’s cockpit whenever there is a need to operate any onboard device on the ground and check avionics as well as related accessories. Power supply units plug to the wall AC socket and provide continuous, clean, no duty cycle DC power.

Aluminum valve as used in production aircraft with Model A-110 master cylinders for dual brake installations. Complete with AN flare fittings.

FINDER 66 Series 30 A Power relays are electromagnetic devices available in DPDT (66.22/66.82) and DPST-NO versions (66.22-x300/66.82-x300) & different variants.

Product Features:

• Reinforced insulation between coil and contacts according to EN 60335-1

• 8 mm creepage and clearance distances

• AC coils & DC coils

• Cadmium Free option available

• ATEX compliant (EX nC) options available

Double Pole Double Throw (DPDT) Changeover (66.22 and 66.82). Commonly used to separate two circuits electrically and connect them magnetically. They are often used to interface an electronic circuit, which works at a low voltage to an electrical circuit which works at a high voltage. 

66.22 type with 30 A rated contacts, PCB mount and bifurcated terminals

66.82 type with 30 A rated contacts, Flange mount and Faston 250 connections 

Double Pole Single Throw Normally Open (DPST-NO) (66.22-x300 and 66.82-x300). Equivalent of 2 SPST switches (NO Normally Open and NC Normaly Closed) and can be used to switch 2 different loads.

66.22-x300 type with 30 A rated contacts, PCB mount and bifurcated terminals

66.82-x300  type with 30 A rated contacts, Flange mount and Faston 250 connections 

Aircraft Replacement Landing & Taxi Light Lamps sourced from different manufacturers. GE Lighting has been acquired by Tungsram. All bulbs are identical, but packaging may differ at the time of shipment.

HYDRO-AIRE, Inc. is part of the CRANE AEROSPACE & ELECTRONICS providing solutions for Landing Gear Systems and Fluid Management for all Aerospace markets. HYDRO-AIRE manufactures anti-skid brake systems, landing systems, fuel pumps for commercial, regional, business, and military aircraft and hydraulic components including shutoff valves, check valves, and fluid reservoirs. The company's brake systems are selected for the evolving market of military unmanned aircraft vehicles.

STOMIL-POZNAŃ S.A. is a tire manufacturer producing All-Terrain (AT) tires designed to perform on- and off-road, providing traction and comfort in different surface conditions. STOMIL tires are used in aviation as well other sectors such as the mining industry. STOMIL tires are installed in most Polish gliders and aircraft including; Jantar, Puchaz, PW–5, etc. They are offered in different versions (Wersja) and sizes with  350x135, 200x80 and 255x110 being the most popular ones. Different STOMIL tubes are also offered for use with the company tires.

For additional information please refer to  the supplied documentation.

OMRON A16 series pushbutton 16-dia. cylindrical body switches are detachable switches. The same contacts can be used for both standard loads and microloads. Their miniature design of 28.5 mm makes these switches the smallest class in the industry. Easy-to-wire terminal arrangement. Certified for EN 60947-5-1. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

Electrodelta (Hartzell Engine Technologies) is the world market leader in top quality voltage regulators for general aviation aircraft, and continues to revolutionize the industry with proven technologies and improvements. The units are assembled from the highest quality electronic components available and are meticulously tested and calibrated to ensure maximum performance.The Electrodelta product line was acquired by by Lamar Technologies LLC in order to add new and alternative  parts to the company's product lines.

The SPRL fuel locking and non-locking caps have secure sealing and easy finger tip operation. These caps are made from the highest quality modern engineering plastics with Viton o ring seals (which can be easily replaced). The mounting rings are anodized aluminum with the flange recessed to give a perfect flush fit whether it is riveted under a metal skin, as in the RV series, or built into a composite structure. The SPRL caps are non vented and recommended to keep the fuel in, the water out and in the locking version, other unwanted items out of your tank. 

SPRL-L (locking) and SPRL-S (non-locking) fuel  caps have an 65 mm O.D. and can be used on Europa, Compair, Glasair, Lancair, Murphy, OMF, Rocket, Velocity, Zenith and many more experimental aircraft. Wt: 80 grams.