AMP Flexi Block Modular Terminal is used for assembles of terminal blocks to custom requirements and it is avalable in Users and Professional complete kits. 

Users Kit consists of 25 pieces Flexi-BLock terminal block, 12 end stops and two 12 in pieces of track,

Professional Kit - No. 6 kit consists of 100 ea. P/N 604101-1 block assemblies, 25 ea. of P/N 604111-1 end stops and 2 ea. track 3 ft. long.

The new and improved QUARTZ range  by TOTALENERGIES (formerly TOTAL) offers a comprehensive choice of engine oils for every vehicle including formulated oils for use in diesel engines and older vehicles. Three cutting-edge technological improvements enable better car engine care, protection and cleanliness while, at the same time, reducing maintenance costs and improving fuel economy.

ECO SCIENCE technology helps the engine to resist physical and chemical degradation for an extended engine life, while maximizing performance and scoring high in fuel economy.

AGE RESISTANCE technology (ART) prevents engine's  wear and tear, abrasion and oil oxidation even at extreme temperatures through a unique combination of hyperactive molecules and anti-wear additives.

CLEAN SHIELD technology integrated in QUARTZ engine oils captures all dirt, dust and soot in the engine, preventing sludge formation and ensuring cleanliness and reduced maintenance costs in the long run.

QUARTZ range of engine oils now features exciting new packaging. QUARTZ product range includes:

Quartz 9000, a synthetic oil providing superior levels of engine performance and protection. It also provides TOTALENERGIES' highest levels of engine cleanliness. Quartz 9000 is long-lasting, extending intervals between oil changes.

Quartz 7000, a synthetic-based oil that provides enhanced driving comfort and high levels of engine cleanliness and protection.

Quartz 5000, an improved mineral oil that can be used in older as well as more recent vehicles.

Quartz 3000, a mineral oil suitable for older cars that can't use other oils from the range.

Quartz INEO, a synthetic oil with pollution control, specially formulated for use with diesel engines. Quartz INEO provides exceptional engine cleanliness and supports particulate filter performance.

Quartz with ART  (age resistance technology) which improves the engine's ability to withstand mechanical ageing. 

Key benefits from the use of TOTALENERGIES QUARTZ engine oils include:

Protection against all the causes of wear by reducing friction and corrosion

Prevention of engine overheating

Ensuring good cylinder compression and maximum engine efficiency 

Ensuring engine cleanness by preventing the deposit of various impurities

Additional information are available in the Product Description section.

Note: Supplied information is provided for reference only. For the selection of the suitable motor oil please observe the manufacturer's instructions.

Danfoss SEL brand includes a range of low, mid, and high pressure industrial and hydraulic rubber, thermoplastic, and PVC hoses that meet or exceed industry standards. Spanning a broad range of operating pressures, Danfoss SEL hoses are the perfect solution for maximum durability and long-lasting performance under even the toughest conditions. SEL product portfolio includes: 

FORCESTREAM standard wire braided hydraulic hoses.

SUPERSTREAM and ULTRASTREAM premium wire braided hoses offering higher working pressures and improved flexibility. 

POWERSTREAM spiral reinforced hydraulic hoses for high pressure applications. 

COLDSTREAM  hydraulic hoses resistant to ambient temperatures down to -50 C, specifically designed for low temperature applications.

ULTIMATE hydraulic hoses supporting high temperature applications up to 135 C, or 150 C for short-term exposure.

ARMADILLO range of hydraulic hoses with specialized cover materials providing advantages like enhanced ozone or abrasion resistance. Ideal for demanding and dynamic applications, such as pit mining equipment. 

SUPER ABRA hydraulic hoses offering an outer cover.

For additional information please refer to the supplied documentation.

UNIFRAX® is the largest ceramic fiber producer worldwide with in-house paper-making capabilities. UNIFRAX® products include FIBERFRAX®Ceramic Fiber Insulation Blankets (S Durablanket 2300F and 2600F, Fibermax Blanket 3000F), FIBERFRAX® Ceramic Fiber Insulation Papers in different grades, FIBERFRAX® Ceramic Fiber Insulation Boards (Duraboard LD and HD 2300F, Duraboard 2600F and 3000F), FyreWrap Insulation Ducts (Elite Grease, Elite Air Distribution System (ADS), Dryer Protection System (DPS), Plenum and Cable) and High Temperature Textiles (Ceramic Cloths 2300F, Ceramic Tapes 2300F, Ceramic Square and Round Braids 2300F, Ceramic Twisted Ropes 2300F, Silica Textiles 2000F and Fiberglass Textiles 1000F. UNIFRAX® products are distributed by Thermal Products Company, Inc.

For FIBERFRAX® Ceramic Fiber Insulation Papers please consult the Product Description section and supplied documentation. Other products can also be supplied on demand. Please contact us.

Miniature incandescent and LED lams (bulbs) sourced from different manufacturers such as GENERAL ELECTRIC (GE), NORMAN LAMPS, AMGLO KEMLITE LABORATORIES,AERO-TECH LIGHT BULB Co. and others, for use in various aircraft applications (cockpit/wing/tail lights).

Unless a specific manufacturer is mentioned at the time of ordering and the selected lamp model is in production by this manufacturer, alternative lamps from different manufacturers shall be provided meeting the same or equivalent specifications.

 GE Lighting has been acquired by Tungsram. All bulbs are identical, but packaging may differ at the time of shipment.

Steel alloy 4130 (ST4130), also known as Chrome Moly after the 2 key elements of its composition, chromium, and molybdenum, is a general-purpose alloy steel widely used by the aviation and motorsports industries due to its weldability, fabrication, and mild hardenability in all offered forms (tubes, bars, sheets and plates). They are available in two different material states (Normalized and Annealed) depending on the process of how the material is heated and cooled.

The Normalized condition (sometimes referred to as "Condition N") is the harder and stronger condition and is best used when forming is not needed. Normalizing relieves internal stress on steel and improves toughness in steels that may harden after the cold working process. The Annealed condition (sometimes referred to as "Condition A") is the softer and formable condition and is best used when forming is needed. Annealing relieves internal stresses, softens and makes the material more ductile.

4130 alloy steel (Chrome Moly) seamless round tubes are offered as part of our own branded (AVIATIONEU NEW ERA) product lines in Normalized (N )  or Annealed (A) conditions indicated by the letters "NRZ" and  "ANL" respectively in the product reference code (SKU). They have been for years the standard of the aircraft industry. These tubes offer good strength and weldability without compromising steel abrasion or impact resistance and can also be made even stronger through heat treatment. They are commonly used in in structural applications, gears, fasteners, and aircraft exteriors. Tensile Strength: 90,000 PSI. Available in a range of outer diameters, wall thicknesses and pre-cut lengths in inches or cut to order (CTO) lengths of 12 inches (1 foot)) or multiples. Apperating price of CTO tubes is per foot (12 inches). Depending on the supplier, they comply with different standards/specifications, such as MIL-T6736 standard or ASTM/A S1906 specifications. Unless otherwise mentioned, there is additional cost if manufacturing test reports are required. For additional information, please refer to the supplied documentation or contact us.

High quality vinyl toggle switch covers that do not have a nipple at the end of the cover. Suitable for MS35058 series switches. Available in different colors.

"AR" Series connectors from AMPHENOL are multi-purpose connectors used in aerospace, military and computer periphery applications. Designed per ARINC 404 specifications AR connectors utilize pin and socket contacts manufactured in conformance with MIL-C-39029. They meet or exceed the requirements of MIL-C-81659 and ARINC Specification 404.

These connectors are available in five shell styles with up to four insert cavities. Inserts in AR product line accommodate signal and power contacts in sizes 12, 16, 20 and 22. Coaxial contacts are available in sizes 5 and 9. Insert arrangements are available utilizing a single type contact or a combination of standard and coaxial contacts.

Non-environmental and environmentally sealed connectors are offered. The environmental sealing is accomplished by wire sealing grommets and interfacial seals. Application specific designs, including transient protection, are available from Amphenol. 

For additional information please refer to the supplied documentation.

Note: Special Order items. Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Contact us. 

The  PARKER HANNIFIN (Hose Products Divisionn) offers the following series of Medium & High Pressure hydraulic hoses compatible with No-Skive fittings.

- BCH Series braided and SX Series spiral hoses meeting international technical standards. More recently developed they are intended for demanding small and medium OEMs and general distribution,

- ELITE No-Skive braided and Parkrimp® No-Skive spiral hoses, exceeding the standards and highly appreciated in the very demanding MRO and OEM markets.

- GLOBALCORE™ State-of-the-art  hose product range, exceeding the newest ISO 18752 and providing technical and economical excellence to the most demanding customers. 

Good, Better, Best classification system is used for easier hose and fitting understanding and selection with superior performance of Best hoses versus their Better and Good counterparts including: 

- Bend radius up to 50% smaller

- Flexibility (bending force) up to 30% higher

- Weight up to 20% lower

- Dimensions up to 25% smaller area

- Impulse resistance and service life up to four times higher

- Working temperature up to 25% higher

Agriculture is one of the typical markets and applications where Good hoses and fittings are the preferred product selection.

For additional information please refer to the supplied documentation or contact us.

Titanium fasteners are best known for their strength,  lightweight, and corrosion resistance. They feature an excellent strength to weight ratio and significant mechanical properties but perhaps their most notable attribute is their superior corrosion resistance to salt water / seawater operating conditions. Titanium fasteners are used in aerospace, automotive and motorsports but also in many other industries including chlor alkali, marine, off-shore oil & gas, desalination, medical, and pulp and paper. They come in different types (like bolts, screws and nuts), sizes, titanium grades and standards/specifications (e.g. ANSI/ASME, DIN/ISO, ASTM, ASME, MIL specifications etc.) to meet application requirements. Compared to respective fasteners made of steel and aluminum, as a rule of thumb, titanium fasteners are about half the weight of their steel counterparts while aluminum fasteners are about half the weight of titanium ones.

Sourced from quality producers, a wide range of titanium fasteners are offered as part of AVIATIONEU NEW ERA product lines (please refer to the individual product presentations). 

AVIATIONEU NEW ERA Titanium nuts are available in both inch and metric systems. Their typicals uses include aerospace, marine, motorsports and many other applications. Manufactured from 6AL-4V grade titanium, CNC machined, heat treated with hexagonal heads and rolled threads these nuts come in diffrent types including locking and flange nuts(*), sizes, thread pitches, flange diameters and lengths. They are sold in pieces. For more information or unlisted fasteners please contact us.

(*) Appearing dimensions for Flange Nuts: Hex Size, Flange Diameter, Height (Hex or Total).

SHELL® extensive range of automotive lubricants includes engine oils for a variety of applications in cars, motorcycles as well as trucks and light or heavy duty vechicles.

SHELL® HELIX Fully Synthetic Motor Oils are manufactured from 100% synthetic base stock and high quality additives to achieve higher performance levels than both synthetic technology and mineral oils. To these high-quality synthetic base oils SHELL® proprietary Active Cleansing Technology is added to create a motor oil that helps provide superior cleansing and protection for today’s engines. SHELL® HELIX oil types include Semi Synthetic Motor Oils, Mineral Motor Oils, High Mileage Oils, Diesel Motor Oils and  ECT Oils.

SHELL® ADVANCE portfolio of motorcycle engine oils consists of  4T, 2T motorcycle and scooter oils. Their key benefits include zero loss in horsepower, fuel economy and longer drain intervals.

SHELL® RIMULA Light Duty range of oils is designed for light duty trucks. With Dynamic Protection and Dynamic Protection Plus Technology (included in Grade LD5), they protect against engine wear and tear caused by each stop and start in daily operations. The high performance additive package contains anti-oxidation components for a longer oil life in vehicles operating under high idle engine conditions. Dispersants in the additive package help break down soot and deposit build-up regardless of the type of load carried.

SHELL® RIMULA Heavy Duty engine oils offer outstanding wear protection with reduced viscosity for improved fuel economy, acid and deposit protection and wear control.

Further information can be obtained through the supplied documentation.

A. RAYMOND TINNERMAN® & PALNUT® (aka PAL) of TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. are leading brands in specialty clip-type fasteners including the world's largest selection of spring steel, stainless steel, and plastic engineered fasteners.Their fasteners replace traditional fastening methods with innovative solutions combining aesthetics and functionality. They are quick and easy to install, and do not require mounting tools. 

TINNERMAN®  & PALNUT® equivalent (style) fasteners, corresponding to respective OEM popular part numbers, and other specialty fastening products are sourced from different quality manufacturers and offered as part of our own labelled (AVIATIONEU NEW ERA) product lines (*). Depending on the selected products, they can be supplied in inch or metric systems in different design variations (impression types), materials, finishes and screw sizes to comply with panel thicknesses. Sold in pieces mostly in packs of specified number of fasteners according to the selected part number. The number of pieces per pack is indicated after the letters "PK" in the product SKU. Parts are all in NEW Condition unless otherwise specified and are accompanied by our own and Manufacturer's Certificate of Conformance.

For additional information please refer to the supplied documentation or contact us.

(*) TINNERMAN® & & PALNUT® are registered trademarks of A. RAYMOND & CIE and TINNERMAN PALNUT ENGINEERED PRODUCTS, INC. respectively. AVIATIONEU GROUP companies DO NOT manufacture these fasteners. They are sourced from their respective manufacturers and/or authorized distributors.

The CONFOR™ foam family (formerly Temperfoam™) by Aearo Technologies LLC (E-A-R), are open cell elastomeric, ergonomic, urethane foams forming part of their specialty foams for comfortable seating, crash protection and noise and vibration control.

CONFOR™ foams offer enduring seating comfort, and absorb a much higher amount of impact shock compared to common polyfoam. They can be used for long period seating applications in aviation, automotive, recreational, office, in medical hospital bedding, sports equipment, wheelchair cushions, industrial operations, or as protective packaging for high value devices.

Standard CONFOR™ product line has been replaced by CONFOR™ M & AC RoHS compliant foams with the same slow recovery attributes as the replaced ones. They come in different sheet sizes (the most popular 16" x 18", 18" x 20", 18" x 24"),and densities, corresponding to different foam weights per cubic foot and denoted by a respective color code (Yellow/Very Soft (CF40 M/AC), Pink/Soft (CF42 M/AC), Blue Medium ((CF45 M/AC), and Green Firm (CF47 M/AC).

CONFOR™ M slow-recovery foams, offer a unique combination of physical characteristics, high energy absorption properties and temperature-softening behavior. They provide impact protection and isolation for dynamic loads, while maintaining consistent static load performance. Their unique combination of slow recovery and high energy absorption allows these materials to offer effective damping and vibration isolation. In addition, as open-celled foams, they are breathable, non-irritating in dermal contact, and thus suitable for highly diverse applications, for medical and body contact cushioning applications to electronics packaging. The respective CONFOR™ AC foams have been engineered for the aircraft market. They are flame resistant and comply with FAR 25.853(a) Appendix F Part I (a)(1)(ii)(12 sec) burn specification requirements, consisting an excellent choice for use on aircraft. CONFOR™ CF42AC & CF45AC foams  are softer and provide more comfort. CONFOR™ green firm density foam CF47AC provides the best energy absorption protection. 

CONFOR™ AC foams are offered in different thicknesses, as solid pieces (e.g. in 1" thickness) or various pre-built  laminates resulting in higher thicknesses. DYNAFOAM is also often used as comfort foam on top of CF-47AC foams. Indicative offered laminations include:

- 1" thickness CF47AC sheet and 0.5" thickness DYNAFOAM sheet. Total laminate size - 16" x 18" x 1.5". Ideal balance for most pilots. 

- 1" thickness CF45AC and 1" thickness CF47AC sheet. Total laminate size - 16" x 18" x  2". Ideal for maximizing safety providing comfort at the same time.

- 0.5" thickness CF47AC and 0.5" thickness DYNAFOAM sheet. Total laminate size - 16" x 18" x 1". Ideal for tall pilots with minimal head clearance.

Third party accessories, such as protective covers, are also available to maximize CONFOR™ foam life.

For additional information please consult the supplied documentation.

Extending the range of nutplates (*) complying with different Military Specifications, anchor nuts for industrial (also known as commercial anchor nuts) for non military uses are offered as  part of AVIATIONEU NEW ERA product lines. They are offered in Standard and Miniature versions, different types (fixed or floating, one lug, two lugs, corner, etc.) in both in Metric (M2 - M24 diameters) and Unified thread types (**).

Common materials used are Steel and Carbon Steel Alloys such as 30CrMnSiA high-strength, low-alloy structural steel, 42CrMo4 steel and C1050 heat treated carbon steel , CRES (stainless steel) A-286 alloy, Brass,  Aluminum, INCONEL alloy or other alloys depending on the manufacturer.

Different offered surface finishes include anodizing, brushing, polishing, resin spraying, powder and black oxide coating, rust preventive oil, sandblasting, painting, different platings (laser engraving Zn, blue black Zn, Ni, Cr, Tin, Copper, titanium alloy galvanized, silver plating, electroplating, etc.)

Depending on the the anchor nut type and the manufacturer, the AVIATIONEU NEW ERA industrial anchor nuts meet ISO and different other standards such as the German DIN, U.S. (ASME & ASTM, IFI, ANSI), British BS, Chinese GB, Japanese JIS and others.

Competitively priced, AVIATIONEU NEW ERA industrial nutplates are cost effective alternatives to the respective OEM parts and commonly used in aerospace, automotive, machinery manufacturing and other industries but also in certain military equipment. 

They are sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. Please refer to product specifications or contact us.

(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners used in blind mounted panel applications, where hex nuts cannot be used or an attached nut is required for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners. 

(**) Metric ISO thread used in Europe. Designated by the letter "M" followed by the value of the thread nominal diameter and pitch in millimeters. Unified form thread designations, such as UNC (unified coarse) or UNF (unified fine),have a fixed number of threads per inch with the thread major diameter preceding the designation.

SCINTEX complete kit with digital gauge and dual flow meters enabling monitoring of the engine's supply and return lines. It comes with 2 fittings for each flow meter (to be specified at the time of ordering) and clamps. For installation wiring between the flow meters and the display unit is required (not included). This kit is intended for use in vehicles, machinery, generators and boats / marine and other engine applications. The flow meters are precision cut from steel and aluminum and they are highly accurate, repeatable and suitable for use with diesel, biodiesel, unleaded petrol and other fuels. The display unit is a 1.8”, high resolution, sunlight readable, wide viewing angle, LCD colour display with a completely sealed and waterproof display front panel. The gauge enclosure is a common 52mm round size to fit many existing cutouts. Key features include highly accurate with good repeatability displays consumption in Litres per Hour or other units, fuel remaining in up to 2 tanks, connection capabilities to a NMEA enabled RS232 GPS receiver,  one or two fuel flow senders and fuel level senders and a single fuel pressure sender and display. It can be powered by 12V - 36V power supplies. Please refer to the additional information and specifications provided or contact us.

AVIATIONEU NEW ERA Stainless Steel Plain Washers are made of Stainless Steel 304 or 316 (depending on P/N) with a bright surface treatment. They are produced in accordance with DIN 9021 standard. Sourced from certified manufacturers these washers are offered in competitive prices and they are available in different sizes on the basis of their Clearance (Hole) Diameter/Outer Diameter/Thickness in mm. Sold in packs of 250 or 25 pieces depending on the size of the washers. The number of pieces included in each pack is mentioned after "PK" designation.

The German DIN 3771 standard refers to all O-rings as sealing elements for fluid technology and identifies O-Ring sizes by their Inner Diameter (ID) &Cross Section (C/S). This standard has essentially been incorporated into the international standard ISO 3601 which sets the globally relevant O-ring dimensions and uniform rules for installation spaces and the properties of the O-rings. It defines metric O-rings according to the same dimension chart as DIN 3771 while it has been extended to include O-rings in imperial dimensions. ISO 3601 also goes beyond the German standard in the area of materials containing material requirements for O-rings that far exceed those of DIN 3771.

Elastomer materials suitable for certain sealing situations are referred to by their abbreviation according to DIN ISO 1629 and include: 

Nitrile/Buna-N (NBR), presently the seal industry’s most widely used elastometer, Ethylene-Propylene (EPM/EPDM) used extensively for outdoor, weather-resistant uses and water applications, 

Silicone (MQ, PMQ, VMQ, PVMQ) especially resistant to high, dry heat in primarily static applications, 

Neoprene® (Chloroprene) (CR) developed as oil-resistant substitute for natural rubber with resistance to ammonia and Freon® and therefore a superior sealing material for the refrigeration industry, 

Fluorocarbon compounds (FPM / Viton®) / (Fluorel®) (FKM) combining high-temperature toughness with wide chemical agent compatibility, and 

Fluorosilicone (FVMQ) combining the good high and low temperature stability of silicones with the fuel, oil and solvent resistance of fluorocarbons.

ISO 3601 / DIN 3771 standard O-rings are offered as part of our own (AVIATIONEU NEW ERA) product lines. Sourced from quality manufactuurers they are supplied in competitively priced packs in different materials, sizes, and hardnesses as specified by a two-digit Shore A durometer number,ranging from 20 (soft) to 90 (hard), depending on the type of elastomer.

For additional information please consult the Product Description section or contact us.

PPG AEROSPACE® Corrosion Inhibitive Aircraft Sealants & Jointing Compounds include different products offered in different packings.

PPG AEROSPACE® P/S (Pro Seal) 870 Corrosion Inhibitive Sealants are two-part, manganese dioxide cured polysulfide compounds.  They have a service temperature range from -65°F (-54°C) to 250­°F (121°C), with intermittent excursions up to 275° (135°C). They act as an effective barrier against the common causes of corrosion on the aluminum alloys or between dissimilar metals. The cured sealant maintains elastomeric properties after limited exposure to both jet fuel and aviation gas. Offered in A, B & C classes.

P/S 870 Class A uncured material is suitable for application by brush in thickness up to 25 mils. It cures at room temperatures to form a resilient sealant having excellent adhesion to common aircraft substrates. Supplied in two-part kits and Semco® cartridges.

P/S 870 Class B uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits or Semkit® cartridges. 

P/S 870 Class C uncured material is designed for roller and faying surface sealing applications. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits and Semco® cartridges.

PPG AEROSPACE® Proseal P/S 890 Class A and B are aircraft integral fuel tank sealants. They have a service temperature range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). Proseal P/S 890 Class A is designed for brush and fay sealing of fuel tanks and other aircraft fuselge sealing applications. Proseal P/S 890 Class B  is designed for fillet sealing of fuel tanks and other aircraft fuselage sealing applications. The cured sealants maintain excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.  Both are two-part, manganese dioxide cured polysulfide compounds. In the case of Proseal P/S 890 Class A, the uncured material is suitable for applicaiton by brush in thickness up to 25 mils. In the case of Proseal P/S 890 Class B, the uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. Both cure at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. PPG AEROSPACE® Proseal P/S 890 Class A and B  sealants are supplied in two-part kits and Semco® cartridges.

PPG AEROSPACE® JC5A Corrosion Inhibitive Jointing Compound is a versatile one-part, non-curing compound designed specifically for the aviation industry. Engineered to prevent corrosion and moisture ingress, JC5A is ideal for safeguarding removable fasteners and assemblies. 

Please refer to the Product Description section and the supplied documentation for additional information.

The  PARKER HANNIFIN (Hose Products Divisionn) offers Push-Lok® Plus multipurpose hose lines featuring the widest fluid compatibility, application range and size range in the industry. At the same time they incorporate the highest working pressures in all sizes, making them the most versatile general-purpose hoses available. PARKER Push-Lok®  system is easy to use. No clamps or special tools are required during installation enabling assemblies in seconds, saving valuable time and cost. The unique seal of Push-Lok ensures reliable, durable, leak-free service while with PARKER:s exclusive color-code system hose inventories are identified and maintained easily and efficiently. 

PARKER's 801 general-purpose hoses with Push-Lok Plus technology are low-pressure, multipurpose synthetic rubber hoses featuring PARKER's exclusive color-coding system. Suitable for use with a wide range of media, 801 hoses are compatible with petroleum-based hydraulic fluid and lubricating oils, pneumatic power, antifreeze, and, when coupled with HY Series fittings, diesel fuel. These versatile hoses feature the unique Push-Lok® seal for easy assembly ensuring reliable, durable, and leak-free service. 801 hoses offer maximum working pressures ranging from 200 to 350 psi. The exclusive color-coding system enhances organization and assembly. Common uses include construction, utilities, machine tooling, ground support, industrial, and automotive applications.

For additional information please refer to the supplied documentation or contact us.