The Andair standard fuel selector valve range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. 

Manufactured to the highest standards, all Andair fuel selector valves are designed for safety, provide a precise and smooth feel in operation and can be supplied with custom engraving. They feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off. All these features help prevent the pilot switching the wrong tank or turning the fuel off.

Andair duplex fuel selector valves have two separate compartments so that two independent fuel lines can be switched simultaneously making them ideal for fuel injected or diesel engines where there needs to be a return line. It allows to pipe surplus fuel to the same tank from which it was drawn. This avoids overfilling the return tank or having an overly complicated fuel system. 

FS2020(*) fuel selector valves feature two 3/8" sections for feed & return. FS2520(*) fuel selector valves feature one 1/2" feed section and one 3/8" return section. Both can be supplied with different ANDAIR fittings to meet application requirements. 

Engines that can benefit from these valves are Surburu, Continental, Rotax, and Diesel aircraft engines. 

For additional information please refer to the product presentations, the supplied documentation or contact us.

(*) Fittings in product titles relate to inlet from right tank, outlet to engine and inlet from left tank in the lower and upper side of the valve.

Forged brass 90º throw fuel valves with fluoroelastomer seals. Available in 1/4", 3/8", or 1/2" female NPT threads. Light operating force makes them ideal for remote operation. Not FAA approved.

Barksdale B1S series are bourdon tube stripped high accuracy pressure switches with a working pressure up to 18,000 psi.

Barksdale's bourdon tube pressure switches offer instrument class accuracy, making them an ideal solution to your pressure control needs when accuracy is critical. Built-in over-travel stops allow for higher proof pressures than most other pressure switch technologies. Setpoints are easily adjusted via an internal adjustment screw. Available in single and dual configurations, Bourdon Tube Pressure Switches are adaptable for use in a wide range of industrial applications. A variety of limit switches is available to allow for a multitude of electrical switching conditions. For applications requiring a highly accurate switch in a highly durable package, Barksdale's bourdon tube pressure switches are the ideal solution.

Offered pressure switches in B1S series are of single setpoint. Connection material is stainless steel and electrical connection is through lead wires.

Product Features:

High accuracy

High pressure up to 18,000 psi

Tamper-proof external adjustment

Single and dual switching capability

Water tight housing versions available (NEMA 4)

Applications:

Oil & gas

Medical applications

Mining

Compressors

Power plants

Water pumps

Hydraulic power units

Pneumatic devices

General industrial applications

Filler opening caps are parts basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. They are either permanently attached or provided with a means of removal and replacement. 

Pressure refuel caps are used to lock, seal, and vent the pressure refuel port for an aircraft fuel tank. Pressure refueling allows for single point refueling on larger aircraft and can be used with all aircraft fuels. To fuel the aircraft, the caps are manually actuated by pressing down on the handle, which will vent and unlock the cap for removal by twisting. The cap remains attached to the aircraft by a lanyard. Once refueling is complete, the cap is inserted back onto the adapter and twisted until locked into place, which effectively reseals the pressure refuel port.

Pressure refuel caps are offered by different manufacturers such as Parker Aerospace, Eaton Coporation and others. They are designed in accordance with military specification MIL-C-8605B (for technical requirements) and MS29526-2(for envelope requirements).

Those from Parker Aerospace are 4.5 inches diameter, with an indexing feature and they fit into a 2.5-inch pressure refuel adapter per military specification MS24484. Their main features include an aluminum base and handle, a fluorosilicone O-ring seal, and antisparking brass chain lanyard (per industry standard RR-C-271) with a plastic tubing cover and corrosion resistant steel hooks.  Lanyards can also be fabricated with corrosion-resistant steel or flexible plastic and fuel resistant tubing. Optional features are also available such as key lock, ventilation, hinge, visual fluid level indicator, dust cover easy-lift handle and contoured adapter.

For additional information please consult the supplied documentation or contact us.

LEAR ROMEC is a brand of CRANE AEROSPACE & ELECTRONICS for fluid management solutions in aircraft, gas turbine engines and radar cooling systems. The LEAR ROMEC products are suitable for applications in the commercial transport, general aviation, business, regional jet and ground based gas turbine markets.

CRANE AEROSPACE & ELECTRONICS is a world leader in the design and manufacture of high performance, technology, accuracy, and reliability positive displacement pumps, centrifugal pumps and true mass flowmeters, under the company's ELDEC, HYDRO-AIRE and LEAR ROMEC brands, which are used in aerospace and defense applications.

Product lines include:

- Vane type positive displacement lube & scavenge pumps featuring high reliability and volumetric/mechanical efficiency, excellent flow performance at high altitude/low inlet pressures, excellent priming performance, lowest weight option for high flow pumps (such as Geared Turbofan) and high contamination wear resistance,

- Fuel Flow Transmitters (FFT) for aircraft engines featuring a +/-0.5% accuracy performance of flow point in the engine cruise range, form factor and flow conditioning for difficult installations,

- Centrifugal pumps for fuel, water and coolant applications of different drive types including gearbox driven, hydraulic motor driven, 400 Hz fixed frequency AC, 28 VDC brush and brushless, and 270 VDC brushless. Like the lube & scavenge pumps, these pumps are characterised by high reliability and volumetric/mechanical efficiency, priming performance and contamination wear resistance.

LEAR ROMEC customer owned fuel pumps can be overhauled or offered in overhaul/exchange condition for immediate shipment. In case of no core returns, core charges apply. Please see below an indicative list of available LEAR ROMEC fuel pumps for overhaul/ exchange or contact us for additional information.

LEAR ROMEC Part Numbers: 

RG15980 | RG15980P 

RG17980 | RG17980A | RG17980A/M | RG17980/M | RG17980D | RG17980D/M | RG17980E | RG17980E/M | RG17980J | RG17980J/M | RG17980K | RG17980K/M | RG17980P | RG17980P/M | RG17980U | RG17980U/M

RG9080F1 | RG9080F1/M | RG9080F2 | RG9080F2/M | RG9080G1 | RG9080G1/M | RG9080G2 | RG9080G2/M| RG9080H1 | RG9080H1/M | RG9080H2/M | RG9080J1 | RG9080J1/M | RG9080J4A | RG9080J4A/M | RG9080J6A | RG9080J6A/M | RG9080J7A | RG9080J7A/M | RG9080J8A | RG9080J8A/M

RG9570K1 | RG9570K1/M | RG9570K2 | RG9570K2/M | RG9570K3 | RG9570K3/M | RG9570K4 | RG9570K4/M | RG9570P1 | RG9570P1/M

Check valves are used in aircraft fuel, hydraulic and pneumatic systems to prevent the backflow of process media. MS28885 series fuel check valves come under different part numbers depending on their respective producers and used in aircraft made by different airframe manufacturers.

FACET FILTRATION GROUP® is the global leading manufacturer of filtration products and systems with an extensive range of products including filter cartidges, housings, water treatment equipment and complete systems. Group products are covering a wide range of applications from aviation fueling and onshore, offshore or onboard marine applications to protection from debris and water contamination of diesel fuel supply of heavy equipment and water treatment facilities. FACET® fuel pumps and filters for aviation uses are separately presented.

PTI® TECHNOLOGIES designs and produces a wide range of FAA-PMA approved filter elements for Hydraulic Systems, Engine Fuel, Lubrication and Pneumatic Systems as well as Screens and Strainers.

Hydraulic Systems

PTI® TECHNOLOGIES hydraulic filter elements are used in today’s commercial and military aircraft and ground support systems. Filter elements comprised of depth-type filtration media combine high efficiency particle removal while optimizing contamination capacity. Operating environments include pressures up to 5,000 psid and temperatures ranging from -65°F to 350°F. 

Engine Fuel, Lubrication and Pneumatic Systems

PTI® TECHNOLOGIES provides filtration solutions for engine applications ranging from the PT6 to the PW4000 series engines. Applications include fuel, lubrication and pneumatic systems. Filter elements of the constructed of depth-type filtration media or woven wire mesh are offered in both disposable and cleanable configurations.

Screens and Strainers

In addition to pleated filter elements, PTI® TECHNOLOGIES provides screen, strainer and metal edge type filter elements for use in last chance, fuel wash flow, scavenge lube oil and other systems requiring protection for downstream components.

PTI® TECHNOLOGIES filter elements come with Certificate of Conformance as standard. If additional certification (FAA Export Form 8130-3) is needed, an additional charge is applied.  If additional certification is needed, manufacturer's certification and a FAA Export 8130-3 form can be provided with any qualifying filter item at extral cost. In this case please select listed products with the extension "CERT" in the product reference code (SKU) from our offered items.

LENZ Model DB desiccant breather filters fall under the company's extensive product portfolio of tank accessories. Made from ABS plastic & impact-modified acrylic LENZ tank breather filters remove corrosive water vapor and they are offered in four standard sizes (3" to 10"). Additional characteristics and features include:

• Operating temp. range: -20˚ F to +200˚ F (-28˚ C to +93˚ C)

• Bi-directional air flow

• Silica gel turns from gold to green when maximum absorption is reached

• Dual filter system with anti-static guard

• Solid contaminant filtration surface area 20.6 in2 (133 cm2)

• Silica gel absorbs up to 40% of its weight in water

• Resistant to alkalis, hydrocarbons, non-oxidizing acids, salt water,and synthetic oils

Available options include:

• Activated charcoal media (consult factory)

• 5 PSI Maximum Operating Pressure

For additional information please refer to the supplied documentation.

WELDON J Series FAA-PMA fuel pumps work with different fluids including gasoline, jet fuels, diesel fuel and oils. They can be used (depending on selected pump) for a variery of applications including emergency fuel boost, priming injected engines and others.

Appearing prices include core charges for no core reurn.

CURTIS PLT-275AV Flush Valves 6 Holes' Adapter Plates Assembly.

Product Specifications:

Diameter: 2.75 in.

Depth: 640,000-650,000

From Mounting Surface to Bottom Hole Diameter: 1-1/2 in.

Not Certified

Prevents return fuel flow during normal operation but provides by-pass fuel feed in an emergency if the fuel pump fails. Wt. 1 oz., 2-7/8" long. Use with tube fittings for 3/8" dia. fuel line. Anodized for corrosion resistance. Made in USA

ATTWOOD SAHARA automatic bilge pumps are self-contained in one compact yet durable low profile bilge pumping package, including pump, wire seals, strainer and mercury-free switch. Their new SAHARA Mk2 pumps replacing older Mk1 models are the only automatic bilge pump that eliminate air-locks with their patented X-Air™ impeller ejecting trapped air in the pump and pipework. They are designed for ultimate reliability and durability in both freshwater and saltwater applications.

SAHARA Mk2 are the easiest automatic bilge pumps to install and service. They can be installed quickly and easily in tight spaces while servicing the pump cartridge from hard-to-reach areas is possible using only one hand. External mounting feet and integrated outlet reduces time and effort. Their universal mounting patterns makes them backwards compatible with the most popular bilge pumps on the market making their replacement simple.

SAHARA Mk2 pumps offer 40% better protection against water ingress and electrolysis vs. their Mk1 counterparts and 2 times better protection than the leading competition. ATTWOOD’s SteadySwitch™ reduces cycling and extends the life of the pump. They are covered with 3-Year Warranty.

SAHARA Mk2 automatic bilge pumps come in 3 models depending on their GPH capacity:

- S500 12V DC with a 500 GPH capacity at open flow, sized for boats up to approximately 17 feet,

- S800 offered in 12V/24V DC configurations with a 800 GPH capacity at open flow, suitable for larger recreational boats,

-  the most powerful and efficient S1200 pumps offered in 12V/24V DC configurations with a 1200 GPH capacity at open flow, suitable for larger boats and yachts.

Service kits for SAHARA Mk2 pumps are also offered.

For additional information please refer to the supplied documentation.

Honeywell is a leading switch and sensor provider for many HVAC applications, including airflow, VAV control, boiler/chillers, motors, and more.  Products include pressure sensors, digital humidity/temperature sensors, magnetic position sensor ICs, current sensors, pressure switches, basic switches, and more.

Honeywell's MICRO SWITCH switches fill many roles in a wide range of applications, including presence/absence/positioning, inspection/recognition, condition measurement, and operator/machine interface. They range from sealed switches used in high temperature aerospace applications to large cable-pull switches ensuring safety on conveyors.

Honeywell's snap-action basic switches are simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions. 

Honeywell's  Standard families of Basic and Miniature switches include V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.

The Premium families of MICRO SWITCH Large and Subminiature switches are designed for high-precision applications where the cost of a switch failing is high maintaining enhanced accuracy and repeatability. MICRO SWITCH premium basic switches are offered in different series, they feature precise and accurate characteristics. Available in large, miniature, and subminiature switch sizes, MICRO SWITCH premium basics are customizable to provide unique actuators, different terminal combinations, custom characteristics, and even value-added wires… to meet customers’ application requirements. With many Honeywell premium basics, they are tested and certified to a higher cycle count.

FALLS FILTRATION TECHNOLOGIES Inc. (FFT), formerly AIRMAZE Inc., manufactures a wide variety of highest quality plastic and metal air intake systems and their filter element replacements as well as filtration equipment (such as oil, air/oil separation and hydraulic filters) for the industrial, agricultural, and aerospace industries.

Today FFT filtering products are  typically initially installed or used as retrofits on aircraft, agricultural, railroad, construction, trucking and power industries for a wide range of applications including gas and diesel engine filtration, filters for generators and gas compressors, light, commercial, and military aircraft filters, vacuum pump filters, pressure blowers, and filters for locomotives.

FFT AIRMAZE designed product lines include UNIMAZE small filters, MULTIMAZE industrial air intake filters, breathers, air intake panels, oil bath filters, AUTOMAZE self cleaning air filters, and MUFFLEMAZE noise reducers.

FFT AIRMAZE aircraft & military product lines include strainers used from fuel to lube oil, wash flow filters used primarily in throttle control systems, FAA PMA fuel filters, in-line filters and replaceable filter elements. FFT AIRMAZE AM01W052261 fuel filter assembly is a FAA PMA fuel filter approved for installation in  the Lake Model LA-4-200 airplane, replacing older Bendix 450-OK fuel filter.

For additional information on FALLS FILTRATION TECHNOLOGIES product portfolio please refer to the Product Description section and the supplied documentation. Filter element replacements for FFT filters are offered both as OEM parts or equivalent to / interchangeable with FFT parts from other manufacturers. Please refer to our respective product listings.

CURTIS Superior Valves are designed for installation in a standard NPT port for NPT threaded valves or an AND-10050 stlye port for UNF threaded valves. CURTIS CCA valves are quick opening brass drain valves for aircraft oil or fuel systems. A slight twist opens the valve. No safety wire needed in closed position. FAA approved. TSO-C76 Approved. Available in different thread sizes and lengths in inches.

Use a sealant on NPT threaded valves or a fuel resistant o-ring of the proper size for UNF threaded valves. Refer to aircraft manufacturers torque specifications for the aircraft in which it is being used. Curtis Superior Valves require no special maintenance. Keep them reasonably clean and replace according to the prescribed synthetic rubber maintenance schedule for the aircraft in which they are used or 10 year usable life per Curtis Superior Valve whichever occurs first. Curtis Superior Valves cannot be OVERHAULED. Replace the entire valve per the maintenance schedule of the aircraft in which it is used or usable life per Curtis Superior Valve should it begin to leak.

Note: FAA Approval applies to fuel applications only. NOT FAA Approved for oil applications.

MANN+HUMMEL GmbH is a manufacturer of high-performance, precision-engineered filtration products offered under their globally recognized MANN-FILTER® brand. The MANN-FILTER®  product portfolio includes 6,800 superior original equipment quality filters and automotive aftermarket filters protecting engines, passengers and machines and used in over 300,000 applications.

MANN+HUMMEL PUROLATOR® brand relates to a compehensive range of engine air and oil filters, power steering filters, fuel/water separator filters and cabin air filters. Includes a growing line of heavy-duty filtration products for medium- and heavy-duty applications and can be used on various trucks such as Freightliner, International, Mack, Volvo, Peterbilt, Sterling and Kenworth, Bomag and Atlas Copco compressors, Deutz and Fendt tractors and others.

Modern reciprocating-engine aircraft (especially large and high-performance ones) use electrically operated auxiliary fuel  boost and transfer pumps  to keep fuel moving toward the aircraft engine or move fuel between tanks to balance aircraft weight. Centrifugal boost pumps,  electric motor driven,  are the most common type and  are used to supply,back up the engine-driven fuel pump or transfer fuel between tanks if the aircraft is so designed. They are  most frequently  submerged in the fuel tank or located just outside of the bottom of the tank with the inlet of the pump extending into the tank. Cartridge/canister or in-tank mounted pumps supply fuel to the aircraft engine while reverse flow through the pump is prevented by check valves. The cartridge/canister design allows removal of the pump cartridge without draining the fuel tank. If the pump is mounted outside the tank, a pump removal valve is typically installed so the pump can be removed without draining the fuel tank.

The RAPCO FAA-PMA approved pumps are offered as direct replacements of the respective pumps by OEMs  such as PARKER AIRBORNE or DUKES (please refer to their separate product presentations). The letters " RA" in the beginning of the RAPCO part number are used to denote the correlation of RAPCO part number to the OEM part number. They incorporate modern design, materials, and manufacturing processes to provide high quality and performance fuel pumps at competitive prices. 

These pumps can be furnished  as NEW or OVERHAUL EXCHANGE, namely new or overhauled pumps in exchange of existing customer owned units (cores). In all exchange cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable serviceable condition. In the case of overhauled pumps, these are overhauled in accordance with FAA-approved process specification and come with a FAA Form 8130-3. All  RAPCO fuel pumps are thoroughly tested for guaranteed pump performance, with a worldwide distribution and a full warranty (same as OEM). For additional information please consult the supplied documentation (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.   

DOOSAN GROUP is a global leader in construction, grounds maintenance and material handling equipment, power and water solutions marketed and sold under different world-renowned brands such as DOOSAN®, BOBCAT® construction machines or GEITH® excavator attachments. Genuine OEM parts for DOOSAN GROUP equipment/machines under their BOBCAT® and other brands are offered along with respective replacement parts (including filters. pumps, drive motors, engines, filters, brake components, maintenance kits, and others) manufactured to OEM specifications from third manufacturers.

For more information on parts for DOOSAN GROUP equipment/machines please consult the Product Description section, the supplied documentation or contact us.