NEWTON CONSULTING manufactures and offers Aero extensive range of fue/oiI/water tank caps and special fittings for use on most of the worlds super cars and bikes and many light aircraft (Adam, CAP, Cirrus, Diamond, Lancair Columbia, Lancair kits, Nemesis, Vans, Velocity and others). Their centres are forged from 6063 or 6082 aluminum and then polished and anodised. The high precision and easy to operate mechanism is very secure and non vented. The flanges are diamond turned and again polished and anodised.  Cap assemblies come complete with cap, gasket, and flanges as ordered. Two keys come with the locking version. Fixing can be by rivet, bolt, weld or glass in as appropriate. Attach o-ring kits are available and can be ordered separately as needed.

Different Aero cap series include:

The Aero 200 series, the smallest and lightest of Aero filler caps. Available only in non-locking version and with either a 6 hole bolt on flange  (A26S) or a Glass-in flange (A20G).

The Aero 300 series, the first choice among designers and installers, offered as standard (non-locking) or locking versions with four different bolt configurations (0 hole, glass in, 6 hole & 9 hole, flange necks with lead free restrictor flaps and many special flange options to meet application requirements such as:

- F30G for installation into a composite skin.

- F30 GS, ideal for wooden aeroplanes avoiding recesses and doors.

- A30L CIRRUS with a low profile threaded flange designed for Cirrus to enable the cap to be fitted after the wing is painted, avoiding damage, dirt, masking, filling and other nuisances.

- FN362, a 6 hole bolt-on flange with hose neck

- A30L VANS, offered if a metal version is preferred to the lightweight version which now comes as standard with Vans aircraft kits.

- Z3 used in specific circumstances.

- Z30L VANS, a cap/flange offered as a retrofit assembly that will go into the older Vans/Usher cap/ flange.

The Aero 400 series, with lock (L) or without a lock (S) including A48S/L with aluminum flange for direct connection to tank and A4LT, plastic centre for use with Aero 400 flanges.

The Aero 500 series, with lock (L) or without a lock (S) and two standard fixing arrangements: A512S/L with flange for direct connection to tank and A50S/LG, glass in flange, moulded directly into tank vehicle skin.

The Aero 600 series, a super light version of the Aero 500, with a smaller footprint but retailing the same 3 inch (77.0mm) filling hole allowing the cap to be used for all fuels.

Fuel and oil drain valves for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

ACS US made all-metal gascolators are offered in two models:

10580 Homebuilders Gascolator - Homebuilders gascolator for use with aviation fuel and standard auto fuel

All-metal gascolator for use with aviation fuel and standard auto fuel with S.S. screen, 1-7/8" dia. cadmium plated steel bowl w/quick drain. Top is CNC machined from 6061-T6 aluminum. Top has 1/4" pipe ports for 3/8" fuel line and one 1/8" pipe port for primer fitting. Wt: 8 oz. May be used with aviation and/ or auto fuel. Replacement gasket for auto fuel is p/n 06-00441. Made in USA.

Not to be used with fuel injectors because it cannot stand up to the pressure.

10585HP High Pressure Gascolator - High Pressure gascolator with lighter weight and simpler design

New ACS high pressure gascolator. Lighter weight and simpler design than the ACS "classic" gascolator. Bailwire and attaching hardware have been eliminated. Threaded collar secures bowl to top. Tested to 50lbs. Bowl is cadmium plated and top and collar are anodized for corrosion protection. Top has 1/4" pipe ports for 3/8" fuel line and one 1/8" pipe port for primer fitting.

10371 Gascolator Bracket - Mount bracket suitable for  gascolators with either metal or glass bowl

Suitable for  gascolators with either metal or glass bowl.

Versatile bracket of .016 stainless steel accommodates gascolators with either metal or glass bowl. When mounted as illustrated, inlet and outlet connections are on sides. When bracket is inverted, one port of gascolator faces firewall for direct routing of fuel line through firewall. A fine quality item manufactured by ACS Products Co. Fits gascolators sold after May 1, 1989.

The gascolator hole in the mount is approx 1-7/8".

Replacement screens (filters) and other parts are also available.

Aircraft hydraulic pumps are used to move non-compressible fluid through an aircraft hydraulic system. This power is often used on small airplanes to operate wheel brakes, retractable landing gear, and some constant-speed propellers. On larger airplanes, hydraulics are used for flight control surfaces, wing flaps, spoilers, and other systems. Aircraft hydraulic pumps are normally engine driven, but sometimes to simplify the system manufacturers use an electric motor to drive the hydraulic system. These hydraulic power packs incorporate a reservoir, control valve and auxiliary valves into a single unit.

As the OEM for the PRESTOLITE Power Packs, AEROSPACE TURBINE ROTABLES Inc.applies an extensive overhaul and testing process to ensure a long and reliable operation of PRESTOLITE Hydraulic Power Packs offered as Overhaul/Exchange (*).  

(*)requires the return of the old unit and its exchange by an overhauled one. The supplier maintains the right to check the condition of the returned unit before the exchange. The price also applies to the hydraulic power packs shipped for overhaul of the same unit and return. 

When intended for use on certified aircraft applications, PRESTOLITE Overhaul/Exchange Hydraulic Power Packs come with Dual Release (FAA/EASA) Certification . It must specified at the time of ordering as additional charges may apply.

For additional information please consult the supplied documentation.

Check valves are used in aircraft fuel, hydraulic and pneumatic systems to prevent the backflow of process media. MS28885 series fuel check valves come under different part numbers depending on their respective producers and used in aircraft made by different airframe manufacturers.

FILLER NECK CF507A Vintage/Classic Style Fuel Cap fits 3" O.D. Filler Necks (Vented).

The CJ AVIATION Inc. is a manufacturer of  FAA-PMA approved fuel pumps for more than 20 years as direct replacements (*) for DUKES fuel pumps installed in Beechcraft, Cessna, Diamond, Maule, Mooney, Lake and Navion aircraft. They can be furnished as NEW or NEW EXCHANGE both priced the same except that for NEW pumps there is no core refund/credit. These pumps feature a rigid construction, tighter tolerance design, redesigned motor and longer seal life. They come with certification (FAA Form 8130-3 ) and a two-year warranty or 300 hours, whichever comes first.

In addition, OVERHAULED EXCHAGE (**) fuel pumps are also offered on respective OEM AIRBORNE, DUKES and WELDON models for use in general aviation and experimental aircraft. The overhauled pumps are serviced in accordance with FAA-approved process specification and certified. These pumps are listed under the respective OEM product presentations.

For additional information please contact us.

(*) When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data. 

(**) In the case of NEW EXCHANGE or OVERHAULED EXCHAGE pumps, these are offered in exchange of an existing customer owned unit (core) for a quick turn around. A refundable core charge is included in the selling price. This is refunded or credited towards future orders with us when a qualified core is returned and its condition is approved by CJ AVIATION within 60 days of the date of the purchase invoice.

The RAPCO Dry Air Vacuum/Pressure pumps are are FAA approved quality and performance pumps intended for use as direct replacements of respective models of AIRBORNE and AERO ACCESSORIES (AA) in vacuum or pressure system applications. They are offered as NEW or OVERHAULED.

The NEW RAPCO Air Vacuum/Pressure pumps are FAA-PMA approved and have an inspection port for monitoring vane wear and determine when replacement is needed. An oil seal on the main shaft helps to prevent oil from entering and damaging the pump. Cooling fins reduce operating temperatures and help to extend pump life. They are internally coated with a special Mil-Spec. hard lube coating reducing friction and wear. The carbon rotor has also been improved by chamfering the leading edges of the vane slots reducing failure due to foreign object damage. With every pump, RAPCO includes a mounting gasket and vane measuring caliper. Fittings not included. There is no core charge when purchasing a new RAPCO dry air pump.  Manufacturers warranty on the 200 series is three years / 1300 hours. The warranty period on the 240 and the 400 series is 1 year / 500 hours, which ever comes first. There is no Core Charge on new pumps. 

The OVERHAULED RAPCO pumps are FAA approved and come with an FAA form 8130-3. Mounting gasket included. The warranty period for the 200 series is two years / 1000 hours. The warranty period for the 240 and the 400 series is one year / 400 hours, which ever comes first. Core charge applies. Please refer to the attached documentation for additional information.

The RAPCO Model RA215CC Dry Air Pump is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. This pump replaces the old model 211CC and can also be used in other engines listed below:

Textron Lycoming: O-235, O-290, O-320, O-360, O-435, O-540, IO-320, IO-360, IO-540, IO-720, TIO-360, TIO-540, GO-480, GSO-480

Continental: O-300, GO-300, IO-360, TSIO-360, TSIO-520, GTSIO-520

The RAPCO Model RA215CC-9  replaces the old model 211CC-9. It is the most common model in General Aviation applications using the O-200 engine. This pump can be used with Continental C90-16F, all 0-200 engines and most Lycoming O-320 engines installed on Cessna 150s, 172s, etc.

The RAPCO Model RA216CW replaces the old models 212CW, 216CW and RAPCO P/N RA212CW. This pump can be used with a wide range of aircraft engines including Textron Lycoming LIO-360, GO-435, TIO-541 and Continental E-185, E-225, IO-346, O-470, IO-470, TSIO-470 and IO-520.

DOOSAN genuine filters are designed and developed specifically for DOOSAN machines. They provide:

- Outstanding filtration efficiency and low maintenance costs,

- Excellent DHC (Dust Holding Capacity) and stable filtration performance,

- Optimized design for DOOSAN machines and outstanding quality proven under harsh testing conditions,

- Longer lifespan with extensive filtering area,

- Maximize machine up-time and increases productivity, and

- Maximize the residual value of the machine.

DOOSAN genuine air filters exhibit a higher filtration efficiency and Dust Holding Capacity (DHC) than non genuine replacements in the market.

DOOSAN genuine oil filters feature:

- Strengthened Housing protecting the filter with superior durability against external impact,

- High-quality 2-layer media maximizing the filtration efficiency and DHC while at the same time protecting engine parts and extending the lifespan of the filter,

- Wire Mesh maximizing the filtering area and DHC by preventing pleats from sticking together,

- Spiral center tube ideal for working under high pressure,

- Reinforced Seam offering high-pressure and longcycle impulse resistance while it strengthens the filter and protects the engine,

- End Cap with superior bonding preventing the inflow of contaminants.

Direct replacements to DOOSAN filters are offered from different quality filter makers including MANN, HENGST, DONALDSON, FILTRON and others. These filters are compatible with DOOSAN filters in form, fit and function.

TEMPEST®, a TEMPEST AΕΡΟ GROUP™ affiliate, offers their Platinum Electronic Fluid Pump line with a range of electronic fuel pumps designed to replace many of the FACET® GOLD-FLO solid state fuel pumps. FAA/PMA certified, TEMPEST® operate in 14 to 28 volt systems of modern aircraft and use an internal high-flow filter element that can be easily replaced when specified by aircraft maintenance manuals. Use of TEMPEST® Platinum Electronic Fluid Pumps in most Cessna aircraft requires installation of tank modification SK421-26C service kit separately priced.

The pump filter element must be changed when specified by the aircraft maintenance manual or when the pump output/pressure diminishes (an event that may indicate a dirty clogged filter). A universal Filter Kit  P/N KIT-P1 is offered which fits all Aero Accessories Platinum Pumps and includes filter P/N 79729, gasket P/N 79136 & O-ring P/N 79139-2.

For additional information please refer to the supplied documentation.

BRACKET Air Filters by BRACKET AERO FILTERS, Inc. have been in service on aircraft and helicopters for many years. BRACKET Foam Filters are installed as factory  original equipment (OEM) on 16 current production aircraft and four helicopters. They number 88 different FAA-PMA approved models and they are also approved for sea planes. Their specially treated polyurethane element assures near total protection from any foreign material entering the system. Their treated foam is highly efficient at filtering with a dual stage foam element increasing dust holding capacity. They have no pleats to store dirt, they repel water, they are fire retardant and abrasive resistant and exhibit a good air flow for proper fuel/air ratio. Designed for low-cost maintenance with increased engine life requiring replacement of only the low cost element. FAA approved these air filter assemblies can replace original air filter units. Air filter elements are also offered for replacements.

The expected shelf life of Brackett elements stored in their original packaging and out of direct sunlight is 4 years from date of manufacture listed on the front of element packaging.This allows the element to be installed on an aircraft at the end of its shelf life.

ZF FRIEDRICHSHAFEN AG (also known as ZF Group) is a global technology company offering products and systems for vehicle motion control, integrated safety, automated driving, and electric mobility. The product portfolio is continuously enhanced and adapted to the market conditions and safety requirements. ZF products and systems ae extensively used in passenger cars, commercial vehicles as well as in various other sectors such as defense and aviation industries, construction and agricultural machinery, wind power, marine propulsion, rail drives and test systems. ZF Aftermarket is world's leading supplier in the automotive and industrial aftermarket, offering an exceptional product range of OE quality spare parts and services.

ZF has decades of experience in the design and development of marine propulsion systems. The company offers complete driveline systems as well as components for all types of vessels – motor yachts, watersports boats, high-speed ferries, workboats and commercial vessels, in a power range from 10 to 12,000 kW. The product portfolio includes a comprehensive range of transmissions (reversing, non-reversing and hybrid), propellers, steering systems and CAN-bus-compatible electronic control systems, azimuth thrusters, tunnel thrusters and sail drives. ZF spin-on transmission gearbox oil filters are used in different series of ZF Marine Propulsion Systems. With high quality, intelligent design concepts and individual service, ZF guarantees minimum downtimes and low life cycle costs. Customer range for these systems include shipyards, ship owners and operators as well as engine manufacturers worldwide. 

For additional information please consult the supplied documentation.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.For more information on SWAGELOK® products please refer to the supplied documentation.

MANN+HUMMEL GmbH is a manufacturer of high-performance, precision-engineered filtration products offered under their globally recognized MANN-FILTER® brand. The MANN-FILTER®  product portfolio includes 6,800 superior original equipment quality filters and automotive aftermarket filters protecting engines, passengers and machines and used in over 300,000 applications.

MANN+HUMMEL PUROLATOR® brand relates to a compehensive range of engine air and oil filters, power steering filters, fuel/water separator filters and cabin air filters. Includes a growing line of heavy-duty filtration products for medium- and heavy-duty applications and can be used on various trucks such as Freightliner, International, Mack, Volvo, Peterbilt, Sterling and Kenworth, Bomag and Atlas Copco compressors, Deutz and Fendt tractors and others.

Honeywell is a leading switch and sensor provider for many HVAC applications, including airflow, VAV control, boiler/chillers, motors, and more.  Products include pressure sensors, digital humidity/temperature sensors, magnetic position sensor ICs, current sensors, pressure switches, basic switches, and more.

Honeywell's MICRO SWITCH switches fill many roles in a wide range of applications, including presence/absence/positioning, inspection/recognition, condition measurement, and operator/machine interface. They range from sealed switches used in high temperature aerospace applications to large cable-pull switches ensuring safety on conveyors.

Honeywell's snap-action basic switches are simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions. 

Honeywell's  Standard families of Basic and Miniature switches include V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.

The Premium families of MICRO SWITCH Large and Subminiature switches are designed for high-precision applications where the cost of a switch failing is high maintaining enhanced accuracy and repeatability. MICRO SWITCH premium basic switches are offered in different series, they feature precise and accurate characteristics. Available in large, miniature, and subminiature switch sizes, MICRO SWITCH premium basics are customizable to provide unique actuators, different terminal combinations, custom characteristics, and even value-added wires… to meet customers’ application requirements. With many Honeywell premium basics, they are tested and certified to a higher cycle count.

The DUKES AEROSPACE Inc. is a manufacturer of  fuel pumps for general aviation and corporate aircraft.  DUKES fuel pumps are used in a range of aircraft such as Beechcraft, Cessna, Diamond, Maule, Mooney, Lake and Navion aircraft. The company is a subsidiary of AERO FLUID PPRODUCTS, part of TransDigm Group Inc.

The DUKES AEROSPACE fuel pumps are offered as NEW, OVERHAULED or OVERHAULED EXCHAGE (in the second case, in exchange of existing customer owned unit (core) for a quick turn around). Overhaul pumps are serviced in accordance with FAA-approved process specification and certified (FAA Form 8130-3) by authorized repair stations such as QUALITY AIRCRAFT ACCESSORIES, the exclusive DUKES AEROSPACE  authorized overhaul facility for General Aviation fuel pumps,  RAPCO FLEET SUPPORT SERVICES division or CJ AVIATION. In the case of exchanged pumps,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a serviceable condition. 

Additionally, FAA-PMA approved direct replacement fuel pumps to the respective DUKES AEROSPACE  models are offered. They are made by reputable manufacturers such as CJ AVIATION and offered as NEW or NEW EXCHANGE (please refer to their separate product presentations). For additional information please consult the supplied documentation of our offered products (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation, consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.

This new MERCURY MARINE Mercruiser replacement Trim Pump replaces the older P/N 14336A17 trim pump. Used on MERCURY MARINE Mercruiser Alpha One, Alpha Gen II and Bravo Drive applications. Matched to the larger new style trim cylinders.

DONALDSON® is a leading world-wide filter supplier for commercial jets, military vehicles, off-road equipment, trucks, light-duty vehicles, power plants, dust collectors, industrial compressors and more. The company is the OEM for  FAA-PMA air filters installed in Cessna (all SE piston models), Piper (turbo charged aircraft), Beechcraft,  Maule & Mooney aircraft delivering consistent and reliable performance.

Product Features:

Selection: Over 75 filter models for Cessna, Beech, Maule, Mooney, Piper and other aircraft.

Easy Installation & Maintenance: No removable parts or oil, may be washed with water.

Better Airflow:  In laboratory airflow tests comparing DONALDSON®, Bracket and Challenger Aviation (K&N) filters for Cessna 172 aircraft, DONALDSON® had the lowest restriction (best airflow). The reasons for this include:

• Filter media is composed of synthetic fibers

• Evenly distributed uniform size and shape media fibers

• More media area and less frame

• Deeper filter pleats

• No oil

Stop more dirt and protect the engine better: They achieve 98.5% or greater filtration efficiency according to ISO5011 fine and coarse dust requirements, greatly exceeding the other filters. 

Long Lasting: rated to last 500 hours, five to 10 times longer than foam filters. Replacement after three years, five cleanings or 500 flight hours, whichever occurs first.

OEM and FAA-PMA Certified: Designed to manufacturer specifications, DONALDSON® filters don not require STCs .

Thoroughly Tested: Third party lab tests show Donaldson filters meet or exceed FAA fire safety regulation per FAR 25.853 and FAR 23.1107 Induction system filters.

Please refer to the attached documentation on the application of DONALDSON® filters in different aircraft/models.

PTI® TECHNOLOGIES designs and produces a wide range of FAA-PMA approved filter elements for Hydraulic Systems, Engine Fuel, Lubrication and Pneumatic Systems as well as Screens and Strainers.

Hydraulic Systems

PTI® TECHNOLOGIES hydraulic filter elements are used in today’s commercial and military aircraft and ground support systems. Filter elements comprised of depth-type filtration media combine high efficiency particle removal while optimizing contamination capacity. Operating environments include pressures up to 5,000 psid and temperatures ranging from -65°F to 350°F. 

Engine Fuel, Lubrication and Pneumatic Systems

PTI® TECHNOLOGIES provides filtration solutions for engine applications ranging from the PT6 to the PW4000 series engines. Applications include fuel, lubrication and pneumatic systems. Filter elements of the constructed of depth-type filtration media or woven wire mesh are offered in both disposable and cleanable configurations.

Screens and Strainers

In addition to pleated filter elements, PTI® TECHNOLOGIES provides screen, strainer and metal edge type filter elements for use in last chance, fuel wash flow, scavenge lube oil and other systems requiring protection for downstream components.

PTI® TECHNOLOGIES filter elements come with Certificate of Conformance as standard. If additional certification (FAA Export Form 8130-3) is needed, an additional charge is applied.  If additional certification is needed, manufacturer's certification and a FAA Export 8130-3 form can be provided with any qualifying filter item at extral cost. In this case please select listed products with the extension "CERT" in the product reference code (SKU) from our offered items.

Filler opening caps are parts basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. They are either permanently attached or provided with a means of removal and replacement. 

Pressure refuel caps are used to lock, seal, and vent the pressure refuel port for an aircraft fuel tank. Pressure refueling allows for single point refueling on larger aircraft and can be used with all aircraft fuels. To fuel the aircraft, the caps are manually actuated by pressing down on the handle, which will vent and unlock the cap for removal by twisting. The cap remains attached to the aircraft by a lanyard. Once refueling is complete, the cap is inserted back onto the adapter and twisted until locked into place, which effectively reseals the pressure refuel port.

Pressure refuel caps are offered by different manufacturers such as Parker Aerospace, Eaton Coporation and others. They are designed in accordance with military specification MIL-C-8605B (for technical requirements) and MS29526-2(for envelope requirements).

Those from Parker Aerospace are 4.5 inches diameter, with an indexing feature and they fit into a 2.5-inch pressure refuel adapter per military specification MS24484. Their main features include an aluminum base and handle, a fluorosilicone O-ring seal, and antisparking brass chain lanyard (per industry standard RR-C-271) with a plastic tubing cover and corrosion resistant steel hooks.  Lanyards can also be fabricated with corrosion-resistant steel or flexible plastic and fuel resistant tubing. Optional features are also available such as key lock, ventilation, hinge, visual fluid level indicator, dust cover easy-lift handle and contoured adapter.

For additional information please consult the supplied documentation or contact us.