GARMIN® GTX™ transponder product line includes Mode A/C and Mode S TSO'd panel mounted transponders offered in a‭ ‬wide variety of configurations to choose‭ ‬from‭, ‬depending on desired functions‭.‬ Different models are listed under separate product presentations. 

GARMIN® GTX™ 325  is a Mode A/C panel-mounted full-featured, TSO'd certified transponder offering a simple, affordable replacement for standard Mode C transponders. It features aural alerts, total air temperature (TAT), pressure altitude readout, altitude monitor function, density altitude readout, built-in timers and automatic ALT/GND mode.  ‬It replaces the popular GTX™ 327 ‬and is essentially the same unit‮—‬but carries the GTX™ 335/345‭ ‬display and button layout‭. ‬It would be a meaningful ‬choice for the replacement of an older Mode C ADS-B‭ ‬Out transponder. 

HONEYWELL BENDIX KING® KX 155A and KX 165A TSO'd Panel-Mounted NAVCOMM Transceivers update the concept of the combined navigation and communications radio for the 21st century. With such features as programmable comm channels, support for 8.33 kHz Comm tuning (KX 165A model only), GPS QuickTune, multiple operating modes, remote channel increment with flip-flop tuning & a built-in timer, they combine a sophisticated appearance with a number of advanced capabilities including:

Programming of up to 32 Comm channels in a non-volatile memory circuit for ready recall of regularly used frequencies.

Pre-selected frequencies stored in a non-volatile memory circuit.

When interfaced to the KLN 94 GPS, both the standby Comm and Nav frequencies can be selected and remotely tuned from the GPS database.

The KX155A (a KX155 upgrade) provides access to all 200 NAV and 760 COMM frequencies, along with its optional 40-channel glideslope. In addition to its standard use, it incorporates new features including a bearing-to-station mode and a radial-from-station mode, an internal Course Deviation Indicator (CDI) for use when the external CDI is being driven by a GPS receiver, and an elapsed-time and approach timer. The KX 155A system offers 10W minimum COMM transmitter power.

The KX-165A NAV/COMM replaces BENDIX KING® KX-155, KX-155A and KX-165 NAV/COMMs which are discontinued but are still available for outright sale or in exchange for returned customer owned units in USED Serviceable or Overhauled Conditions with FAA 8130-3 Form certification. The letters "SV","OH" and "EX" in the product reference numbers (SKU) indicate the condition/sale terms. 

Very similar to KX 155, the BENDIX KING® KX 165 NAV/COMM additionally incorporates an internal VOR/LOC Converter to directly drive the BENDIX KING®  KI 525A HSI (part of the KCS 55A Compass System). It can also display the current radial from the active VOR instead of the standby NAV frequency. Other features include 10 watts min transmitter power, easy-to-read, bright gas-discharge display, large, self-dimming, microprocessor- controlled gas discharge readouts and solid-state electronic tuning for fast, accurate selection of all 200 NAV and 760 COMM frequencies.

The KX 165A (-0201 model) NAV/COMM is a slide in 8.33 kHz replacement for its predecessors, the KX 155A which is discontinued and KX 165A 25 kHz NAV/COMMs (-0101 model). Completely redesigned, it features programmable Comm channels, support for 8.33kHz Comm tuning, GPS Quick-Tune, multiple operating modes, remote channel increment with flip-flop tuning and a built-in timer.

Mounting racks, connectors and manuals  for the installation of the NAV/COMMs are also offered.

For additional information please consult the Product Description section and the supplied documentation.

The FAA TSO'd RCA26AK (14V) and 26BK (28V) series of electric attitude indicators (artificial horizons) by KELLY MFG (RC ALLEN) are known for their dependability and ruggedness. They incorporate tremendous advances in presentation, precision, and reliability.With a proven track record for dependability and ruggedness, the attractive new extended color schemes and ultra-precise spherical presentation (eliminating old parallax problems) they set a new standard for safety.These gyros provide a more accurate IFR reference for the beginning instrument pilot or a Cat II captain. A new three phase motor/inverter is designed into the gyro enabling it to operate at lower temperatures which extends to useful life. The instruments employ a new, high precision air erection system which provide erection torque for maintaining a proper vertical alignment reference. The erection air is supplied by a turbine pump which is integrally coupled with the gyro motor. Through maximum utilization of unitized construction the design is free of resonant frequencies below 100 HZ and thus cannot respond to low frequency disturbances which can cause dither and premature wear out of the unit. The display portion of the instruments has a directly coupled roll movement, and a pitch movement mechanism identical to that of the field proven vacuum gyros produced by R.C.Allen since 1966. A "pull to cage" spring type force limited mechanism assures immediate alignment and stability whenever power has been applied to the gyro, a feature non-existent on vacuum driven gyros. These artificial horizons have a hybrid inverter which converts the aircraft DC power to the required voltage and frequency for motor operation. All units have a pull cage knob and a power failure flag that drops into view whenever the supply voltage is lost or when the voltage has dropped below a level of acceptable for proper operation of the gyro. Slip indicator can be added to satisfy FAA AC91-75 upon request. Available in 14V or 28V voltage versions with fixed or movable pointer, lighted or unlighted, power failure flag, panel tilt and optional inclinometer. Mating connector MS3116E8-4S and panel screws are now included with each new instrument at no extra charge.

Dimensions: 3.38"W x 3.38"H x 8.14"L

Weight: 2.3 lbs.

AMPHENOL Bayonet Neill Concelman (BNC) product series connectors are miniature quick connect RF connectors. They feature two bayonet lugs on the female connector. BNCs are ideally suited for termination on miniature and subminiature coaxial cable (RG-58, 59, to RG-179, RG-316, etc.). Other BNC series include:

HD-BNC product series featuring the trusted, push and turn interface of a traditional BNC and providing tactile feedback and a positive lock for quick and guaranteed mating and 

Mini-BNC product series allowing higher connector densities while preserving the positive characteristics of the full-size 75 Ω BNC. The Mini-BNC provides the same positive locking bayonet system found on the BNC but allows 40% more interconnects in the same area.

SWIFT AIRCRAFT manufactures Swift two-seater low wing composite aircraft with striking elliptical wings and double curvature surfaces. Comfortable, safe and environmentally sound they are designed and manufactured entirely in the UK, and available globally,

The company also manufactures Swift aircraft gauges specializing in precision-engineered gauges, including Exhaust Gas Temperature (EGT) and Cylinder Head Temperature (CHT) gauges, commonly used in aviation.

Amphenol MS MIL-C-5015 Circular Plug Connectors are designed to meet the demanding performance requirements of military standards. These cable mount circular plug connectors have proven electrical capability for equipment applications where durability is important. The Amphenol plugs have threaded couplings and single key/keyway shell polarization for an accurate and reliable connection. The solid shells of these MS Series circular MIL-C-5015 connectors are made from high grade aluminium alloy. The shells are electrically zinc plated with an olive drab chromate finish which ensures a high resistance to corrosion. The inserts of these military circular connectors are made from resilient synthetic rubber which offers a high dielectric strength and resistance to vibration.

The MS3106A-10SL-3S plug can be used with Turn Coordinator TC02E-3-2 or Turn & Bank Indicator TB02E-2-1.

AERO INSTRUMENTS® Company, now part of AEROCONTROLEX® Group, Inc., has been a supplier of Air Data Sensors for aircraft applications for over 85 years. AEROCONTROLEX® current manufacturing  of Air Data Sensors has been transitioned to AEROSONIC® Corporation which manufactures aviation instrumentation and avionics equipment including air data systems, standby displays, digital and mechanical standby instruments, sensors and probes.

Air data include total pressure of the airflow measured by pitot tubes, static pressure of the ambient air by static ports (or both pressures by pitot-static tubes), total temperature (higher than the actual air temperature due to friction and adiabatic compression) by TAT sensors, and angle of attack (i.e. angle between the airfoil and the airflow) by AoA sensors. All these data are vital for aircraft flight and in the case of large civil or military aircraft, once collected are fed to  an air data computer (ADC).

AEROSONIC® / AEROCONTROLEX® extensive portfolio of pitot probes, including pitot, pitot static and pitot/angle-of-attack probes, are designed and today in use  on a wide range of aircraft ranging from military and large commercial transports to helicopters and UAVs. Their product range  includes electrically heated pitot probes, pitot-static probes, static pressure ports, angle of attack, temperature sensors and flight test equipment for the aerospace and defense industries. They are designed to meet or exceed all applicable standards, including SAE AS393, DOD MIL-T-5421B, TSOC-16, AN5813 and BS2G.135 and feature heating elements to prevent ice accretion and water ingression for reliable operation in the most adverse environmental conditions. Probes may be configured as stand alone with pneumatic outputs to the Air Data Computer, or they may integrate the computing function and eliminate the pneumatic connection.

AEROSONIC® fuselage mounted static pressure ports are engineered to meet or exceed industry specifications to supply ambient static pressure measurements to air data computers, altimeters, airspeed indicators and vertical speed indicators in numerous types of aerospace applications. The Static Pressure Ports’ electrical heating elements prevent ice accretion and water ingestion ensuring the performance of primary flight instruments is not degraded even under the most severe atmospheric conditions.

For additional information please refer to the Product Description section.

The new OROLIA-KANNAD INTEGRA 406 GPS ELT is a major step forward in the development of ELT technology and aircraft safety. Major benefits over standard ELTs include  a fail-safe automatically activated system for transmission of both the unique identification and GPS position in case of ditching of the aircraft or a crash landing as well as the ability for the pilot/ crew to remove the ELT from a downed aircraft. In addition,it features internal 406MHz and GPS antennas saving significant cost on aircraft  installation without the need for an  external antenna (national authorities’ rules and regulations permitting) and additional external GPS interface.

The 406 INTEGRA fixed ELT(AF) transmits on both the international 406MHz satellite search and rescue system (min  24 hours from activation) and on 121.5MHz for local direction finding. Minimum operating temperature is -20°C. The internal battery life of the INTEGRA is 6 years. Complies with European and FAA standards.

406 INTEGRA ELT(AF) is designed for flat installation on fixed wing aircraft and can be connected to an outside antenna (sold separately). 

This ELT comes with:

the COMPACT universal mounting bracket

RC200 remote control panel

DIN-12 connector

SUB-D 9 pts female connector

Note: Hazardous Material

Pitot tubes scan the static and dynamic pressure, and they are used on aircraft to determine the aircraft airspeed. 

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE Non TSO'd (non-certified) pitot tubes have been used for many years on different types of experimental or other aircraft where no certification is required. Available in different heated and unheated versions for 12 or 24 V electrical supplies, for vertical or flat installations. Standard (3/4") and long (4") mounting brackets are offered. Heated Material: Stainless Steel. Please consult the supplied documentation or contact us for further information.

JEPPESEN NavData Databases are offered for different GARMIN AERA portable GPS models such as 500/510, 550, 695 and 795. They are available for different geographical regions. JEPPESEN NavData databases can be included only in the respective orders of GARMIN AERA GPS units. Orders for these database and their updates are fulfilled by AVIATIONEU TRAINING SYSTEMS & SERVICES which offers aviation database services, in cooperation with respective database providers, on a simplified subscription-based ordering process saving man effort, time and costs for customers. Please refer to our listed services or contact us for additional information.

Solid State Cockpit Voice Recorders (SSCVR) and Flight Data Recorder (FDR), aka "black boxes", are required by Civil Aviation Authorities to be installed in large commercial aircraft and some smaller commercial, corporate, and private aircraft used to help reconstruct the events leading to an aircraft accident. Manufactured by various manufactuers such as HONEYWELL AEROSPACE, UNIVERSAL™ AVIONICS and others they are offered in different models, as CVR, FDR or combined systems, certified by FAA, EASA and other CAAs and available in NEW Condition but also as USED (OVERHAULED) units for straight purchase or exchange. For additional information please consult the Product Description section, the supplied documentation or contact us for a quotatin.

The analog and digital portable two-way radios (walkie talkies), manufactured by QUANZHOU YANTON ELECTRONICS CO., LTD., come in different models covering UHF or VHF and UHF frequency bands and different power outputs for communication over different distances. They have an ergonomic design and cover the needs of various operations. YANTON radios are approved by the Ministry of Information Industry in China and the European CE, RoHS and USA FCC certified/approved for use in other countries.

The 730/830 Engine Monitoring Systems (EDM) from JP INSTRUMENTS revolutionize engine monitoring by the compact size integration of a full color graphical LCD display with the extremely popular EDM 700/800 series functionally. Both 730 and 830 EDMs feature: colourful graphics, larger data display for easy reading, parameters in full colour, annunciation of exceedances, less page swapping, more data per page. The units are "Plug and Play" compatible with existing EDM-700/800 units. Oil pressure has also been added to the entire EDM series line.  Both 730 and 830 are FAA approved for use as secondary engine monitors. However they CANNOT BE USED as a replacement for primary gauges which have to be maintained. Different options and accessories are also available at additional cost.

Highly reliable and field-proven, the ADF 3500 direction finding systems by BECKER AVIONICS are trusted by the most reputed aircraft manufacturers. Suited for rotary and fixed wing applications, the ADF 3500 can be operated either in a standalone fashion or within EFIS, FMS or integrated flight deck systems.

The ADF 3502-() Receiver is designed for professional applications in the frequency range 190.0 kHz to 1799.5 kHz. The system is ideally suited for installations where minimum space is available. The small, lightweight control unit CU 5502 fits into a standard 2 ¼” (57mm) round instrument cutout and is only 2 ½” deep. The ADF Receiver can be installed at any convenient place in the aircraft. The RS 422 interface between CU and Rx reduces inter-wiring. The control unit CU 5502 offers a clear, high contrast, double line display, which is readable under all lighting conditions, even in bright sunlight. The frequency can be selected in 0.5 kHz/1kHz, 10 kHz/100 kHz steps by using variable speed frequency control. The pre-selection in the channel memory of the preset display allows instant switchover by pushing a “Flip-Flop” key to a new NDB en-route for indication of the cross bearing for a position fix relatively to a second NDB. The output of the receiver is compatible with indicator ID 3502 and the converter AC 5303/04 for RMI.

The ADF 3500 system features an extensive automatic self-test function. After switch-on, the microprocessor and the frequency synthesizer are thoroughly checked by a test subroutine. The remote receiver RA 3502-() unit can also be controlled by CDU of FMS systems.

JTSO certified for either VFR or IFR use in all types of fixed wing and rotary wing aircraft, the ADF receiver can also be combined with other Becker Prime Line equipment, such as VHF-COM, NAV-VOR/ILS navigation and Mode S transponder systems which have similar control units, providing a pleasant presentation in the panel.

RA3502 REMOTE ADF RECEIVER SYSTEM Features:

Compact and lightweight design

No forced cooling

No ventilation slots

Field-proven reliability

Robust and maintenance-free design

Operating altitude: 50,000 ft

RS422 control interface for EFIS or FMS integrations

Active LOOP/SENSE antenna

RMI connection via RMI convertor

Integrated BITE

JTSO, TSO certified

UMA Electronic Hydraulic Pressure Gauges are offered in TSO'd and Non TSO'd models and 1-1/4"  or 2-1/4" diameters to fit respective aircraft panel openings. They are housed in aluminium or Valox 420 plastic cases (depending on the model) and connect to  precision, high pressure transducers which mount directly to the aircraft's hydraulic system. Standard markings are black and white. Recommended for new design projects and applications. 

Note: Pressure Transducers (Senders) ARE NOT INCLUDED in the prices of the pressure gauges. They are sold separately and are not TSO'd.

The HONEYWELL BENDIX KING® KX-125 is ideal as a replacement radio, a primary system for homebuilts or a very affordable back-up. despite its low price, it comes with a complete list of features. Its COMM section provides 760 frequencies, 'flip-flop' frequency selection, a built-in audio amplifier with side-tone and audio leveling, direct tuning, stuck-microphone alert, and even remote transfer of both COMM and NAV frequencies. The separate NAV section offers 200 frequencies, including localizer. It has gone through environmental testing and has FAA TSO approval but will still require a FAA 337 form for new installations.

Product Specifications:

Dimensions: 6.25"W x 2"H x 10.16"L

Weight: 3.88 lbs

Power Requirement: 14Vdc

Temperature Range: -20C to 55C

Altitude Range: Up to 35,000ft

Lighting: 14 Vdc

Transmitter Power: 5 watts minimum (7watts nominal)

TSO Compliance: C37c, C38c , C36e, C40c

HONEYWELL BENDIX KING® Aviation Database Services are offered for database updates of different navigation BENDIX KING® devices. They cover different geographical areas and are available for use in single or multiple devices, as single (one cycle) or multiple scheduled annual update cycles per year. They can be distributed through media (database cards/cartridges) and/or internet downloads (eliminating media and shipping costs). Database upgrades are subject to copyright restrictions and are allowed for use only in the specific aircraft and devices specified at the time of ordering. Orders for HONEYWELL BENDIX KING® database updates are fulfilled by AVIATIONEU TRAINING SYSTEMS & SERVICES which offers aviation database services, in cooperation with respective database providers, on a simplified subscription-based ordering process saving man effort, time and costs for customers. Please refer to our listed services or contact us for additional information.

The GARMIN® GMA 342 is an affordably priced yet loaded with features TSO'd panel-mounted audio panel providing direct slide-in replacement for legacy GMA 340 or select third-party units. It can support dual comm, dual nav, 3 aux receivers and 2 wired stereo music inputs — enhanced with bass boost levels, equalizer settings and exclusive 3D Audio technology that spatially separates the multiple communication sources entering the pilot's headset.  Up to 2 dedicated stereo music sources can be connected via the unit’s rear connectors. With stereo headsets, incoming audio is spatially separated to reflect how different audio sources come from different directions. An automatic digital voice recorder on GMA 342 continuously captures the last 60 seconds of incoming active comm audio for instant playback with a single button press. Advanced auto squelch technology automatically adapts to a quiet or noisy environment without clipping words or cutting out during conversation.

Accessories: If not included in the ordered unit, installation Kit and other accessories are available at additional cost.

The vertical speed indicator is a precision instrument which provides an accurate indication of rate of change of altitude. UNITED INSTRUMENTS TSO'd (TSO-C8b) 7000 Series vertical speed indicators (VSI) offer several configurations and have been selected as standard equipment by aircraft manufacturers worldwide for use in most production aircraft.. They are temperature compensated and provided with a zero adjustment screw on the face of the case in the seven oclock position. Power: Static system. Size: 3-1/8" x 3-1/8" x 4", Wt. 0.7 lb. Available in unlighted and lighted versions.