NAS1922/NAS1924 series clamps are light-weight, aircraft application clamps from 300-series stainless steel available with either a 1/4" round slotted screw or a 1/4" slotted hex-head screw. 

NAS1922/NAS1924 series clamps are included as part of our own branded (AVIATIONEU NEW ERA) product lines. They are available in different sizes (NAS1924 clamps are available in sizes 48 & above). Both screw styles can be supplied with optional lock wire hole for tamper resistance. Black Oxide coated band versions (designated by the letter "L" in the part number) are also offered for increased wear resistance.

The following designators in the product reference number (SKU) indicate the different versions:

-1 Clamp with round slotted screw

-3 Clamp with slotted hex-head screw

-1H Clamp with round slotted screw & lock wire hole

-3H Clamp with slotted hex-head screw & lock wire hole

NAS1922/NAS1924 series clamps are sold in pieces or packs of specified number of pieces indicated after the letters "PK" in the product reference number (SKU).

Please refer to the attached documentation of the effective diameter range for different part numbers.

AN840 series of pipe thread hose nipple fittings are offered as part of our own (AVIATIONEU NEW ERA) portfolio of fittings. Sourced from quality producers these fittings can be furnished in aluminum or brass in different tube internal diameters and thread sizes in inches.Aluminum are designated by the letter "D" after the suffix number of the product reference number (SKU).

SAE-AS5406/AN832 series union tube hydraulic fittings are available as part of our own labelled (AVIATIONEU NEW ERA) product lines in different materials, tube outer diameters and thread sizes in inches. The AN832 series fittings are superseded by the respective fittings of  SAE International standard  SAE-AS5406 series. 

Like their SAE-AS5174/MS24392/AN815 union flared tube counterparts, SAE-AS5406/AN832 series fittings are manufactured from Carbon Steel, Aluminum Alloy, Corrosion Resistant Steel (CRES), Titanium Alloy. The 2 digits after the series code indicate the tubing outer diameter (O.D.)  in inches. The following Material Code Letters in the part numbers indicate the composition of the fitting.

No code letter in part number for Carbon Steel

Code letter “D” for Aluminum Alloy (except 7075-T73)

Code letter “J” for CRES, type 304

Code letter “K” for CRES, type 316

Code letter “S” for CRES, type 347

Code letter “T” for Titanium Alloy 6AL-4V

Code letter “W” for Aluminum Alloy 7075-T73

For example, AS5406D06 union fitting is made from Aluminum Alloy with a tubing outer diameter (O.D.) 3/8". The corresponding union fitting in AN832 series would be AN832-6D.

Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

EATON AEROQUIP® brand name represents quality and innovation for aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Eaton’s hydraulics were acquired by DANFOSS and form part of DANFOSS product portfolio.

DANFOSS EATON AEROQUIP® AE246/AE446/AE546/AE846 Series Hoses are based on AE246 advanced technology designed, tested and proved high pressure 3000 psi PTFE hose with Hi-Pac®braid reinforcement containing densely packed small diameter wires braided over a minimum thickness Teflon tube. This reinforcement offers up to 50% lighter in weight while the wires absorb stress more uniformly resulting in a stronger wire braid with less metal. Available in different tubing sizes and internal diameters in inches. They meet or exceed AS1339 performance requirements.

The AE546 series hoses feature an integral braided polyester chafe guard (manufactured by braiding polyester yarn onto existing hose styles) while those of  AE246 series come with an integral silicone firesleeve. 

The AE446 and AE846 Series hoses are AE246 high pressure teflon hoses with an integral silicone asbestos free fire protection (sleeve), adhering directly onto the hose metal braid and end fittings to form a smooth, tight bond.

Common end fittings used with these hoses include CRES fittings of -3 to -12 thread size, flared (MS33656), flareless (MS33514) or BSP type offered in straight, 45 deg and 90 deg styles.

“Super Gem” Reusable Flared Fittings can also be used with these hoses. They consist of 3 pieces: a socket, sleeve and nipple assembly.Made from corrosion resistant materials elbow fittings are available in standard, 45°, and 90° styles. Mate with AS4395 and AS33514 end connections. These service proven flared fittings provide permanent protection against leakage, even after high temperature aging and pressure impulsing to 250,000 cycles or more. This is due to the separation of the sealing function from the retention function.

The AEROQUIP® hoses are priced and sold by the foot unless otherwise specified. Fittings can be separately purchased in pieces.

For additional information please consult the Product Description section and the supplied documentation.

SAE-AS5174/MS24392/AN815 series union, flared tube male to male hydraulic fittings are available as part of our own labelled (AVIATIONEU NEW ERA) product lines in different materials, tube outer diameters and thread sizes in inches. The AN815 series fittings are superseded by the respective fittings of Military Standard MS24392 which in turn are superseded by SAE International standard  SAE-AS5174 series. Materials include: Carbon Steel, Aluminum Alloy, Corrosion Resistant Steel (CRES), Titanium Alloy. The 2 digits after the series code indicate the tubing outer diameter (O.D.)  in inches. The following Material Code Letters in the part numbers indicate the composition of the fitting. Finish code “V” in the PN indicates high purity Aluminum coating for “W” or “D” fittings. 

Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

No code letter in part number for Carbon Steel

“D” for Aluminum Alloy (except 7075-T73)

“J” for CRES, type 304

“K” for CRES, type 316

“R” for CRES, type 321

“S” for CRES, type 347

“T” for Titanium Alloy 6AL-4V

“W” for Aluminum Alloy 7075-T73

“Z” for Carbon Steel, Zinc plated

For example, AS5174D0606 union fitting is made from Aluminum Alloy with a tubing outer diameter (O.D.) 3/8" and a 0.5625-18 UNJF thread. The corresponding union fitting in AN832 series would be AN815-6D.

Note: In SAE AS standards for new designs, Aluminum fittings with material code letter D in their Part or Identifying Number (PIN) are replaced by those with material code letter W for Aluminum Alloy 7075-T73 providing a higher tensile strength. In addition CRES fittings with material code letter S can be used for replacement parts. For new designs use of CRES fittings with material code letter R is recommended for applications requiring higher temperature. 

AN822 90° Flared Tube & Pipe Thread Elbow Fittings are superseded by those of Military Standard MS20822 and these are superseded in turn by SAE-AS5195 standard. These fittings are made from different materials such as carbon steel, aluminum or corrosion resistant steel (stainless steel), sourced from quality manufacturers and offered as part of our own labelled (AVIATIONEU NEW ERA) product lines in different tube outer diameters and NPT thread sizes in inches. The fitting composition is designated by a code letter after the dash number in the part number as follows:

No letter for Carbon Steel

"B" for Copper Alloy

"D" for Aluminum Alloy

"J" for CRES, Class 304

"K" for CRES, Class 316

"S" for CRES, Class 347

"W" for Aluminum Alloy 7075-T73

For additional information please consult the supplied documentation or contact us.

BAND-IT Junior® series smooth ID hose clamps come in a wide choice of widths, thicknesses and inside diameters in Imperial and Metric systems. They are made from different materials such as 201 austenitic chromium-nickel-manganese Stainless Steel, 316 Stainless Steel or Galvanized Carbon Steel (GCS). With their leak resistant design BAND-IT JS® clamps out-perform the other common clamping methods of hose sleeve clamping. They reduce the risk of leaks especially when used on thin walled hoses, ensuring that hose sleeving stays in place through the life of the sleeve. Their low profile buckle design reduces the clearance needed around the hose and has no sharp edges or tail that could cause injuries. Available for hose assemblies up to 8" outside diameter.

BAND-IT Junior® clamps are also offered as preformed clamps used in a wide array of agricultural and industrial applications. Preformed clamps are  made from Alloy 625, a nickel-chromium-molybdenum alloy known for its high strength, high toughness and excellent corrosion resistance. They are vibration resistant and require no hammering or crimping to complete installation. Clamps automatically lock in place under full tension in one simple level movement of the clamp tool(*).

BAND-IT JS® Clamp Features:

Vibration resistant lip lock design. No hammering or crimping

Unique buckle nest and smooth ID design reduces leak paths

Double wrapped steel bands for additional strength

Various materials for corrosive environments

Sold in packages with specified number of clamps per package indicated after the letters "PKG" in the product reference number (SKU).

For more information please refer to the product specifications or contact us.

(*) Note: BAND-IT Junior® Preformed Clamps should be installed using BAND-IT C001 Tool and J001 Junior® Adapter. 3/8" clamps can also be installed using the BAND-IT J020 POK-IT Tool.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different hoses for water, heat, air intake, protection, form, connecting, low pressure and others & related fittings are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU). ROTAX engine hoses are generally sold in meters and appearing prices are per meter but some hoses of specific dimensions and fittings are sold in pieces.

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

SAE100 R7 thermoplastic hydraulic hoses are commonly used with petroleum, fire-resistant, and water-base fluids, pneumatic, fuel, and lubricating systems. These hoses are poduced by different manufacturers such as KURT HYDRAULICS, DANFOSS EATON, PARKER and others they are offered as standard (conductive) and non-conductive (blocking electrical flow). They are generally composed of three parts: tube, reinforcement and cover. The tube and cover are made from high quality thermoplastic while reinforcement is made from suitable synthetic fiber. 

KURT HYDRAULICS, part of KURT Manufacturing Group. manufactures and supplies a wide range of hydraulic fittings, hoses and couplings. The KURT HYDRAULICS thermoplastic hydraulic hoses are manufactured to the highest quality standards. Available in different grades for medium- to high-pressure applications in a range of sizes from 1/8” to 1”, depending on grade. Matching hydraulic fittings, quick crimpers, and more are also offered to create a complete hydraulic system. 

KURT HYDRAULICS SAE100 R7 hoses feature a three-layer construction—nylon inner tubes, braided synthetic fiber reinforcements, and flexible, durable urethane outer sleeves. Offered in electrically conductive and non-conductive styles in most grades. They are rated up to 5000 PSI WP and 20000 PSI BP, varying by grade and diameter. All grades and sizes feature an operational temperature range from -40°F to +212°F.

Hoses are priced and sold by the foot unless otherwise specified. Fittings can be separately purchased in pieces.

For additional information on different products please consult the Product Description section, the supplied documentation or contact us.

Range of special accessories by FRANZ AIRCRAFT ENGINES for use in BRP-ROTAX® aircraft engines and other applications.

REFFLEX® INTERNATIONALl B.V. manufactures prefabricated hoses, tubes, fittings and tools for refrigeration applications. Their REFFLEX® advanced systems of refrigeration flexible hoses are offered in two sizes, DN-2.0mm, and DN-5.0mm while larger sizes are covered by their COLDLEX® system. They are both strong and reliable, easy to use, ozone, UV and oil resistant, with a highly flexible, short bending radius and capability of absorbing all possible multi directional vibrations. They are vailable in different colors.

DN-2.0mm is used for connecting pressostats, pressure gauges etc. while DN 5.0mm is mainly used for connecting oil separators and level regulators.

REFFLEX® fittings 1/4 “flare, 6mm ODS, 1/4 “flare or 3/8” flare are also offered for use with their DN-2.0mm, DN-5.0mm hoses together with different tools.

For additional information please refer to the supplied documentation.

AVIATIONEU NEW ERA plain banjo fittings are intended for use in hydraulic pipes in automotive fuel, oil and hydraulic systems. They are available from different materials, mild steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8, stainless steel 202 & 304. Sourced by certified manufacturers these banjo fittings are competitively priced and offered in different Metric sizes (M10x5/16", M12x5/16", M14x5/16", M14x3/8", M16x3/8", M18x3/8", M18x1/2") and different surface treatments (clear /yellow zinc plated, olive green zinc plated, dacromet). Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

The  Parker Aerospace (Stratoflex Products Division) offers a broad array of PTFE, rubber and metal hose and hose assemblies, hose fittings, rigid tube assemblies, couplings, quick disconnects, swivel joints, fuel break-away valves, hydraulic fuses, and flow regulators, and specialty fittings including permanently swaged and welded fittings suitable for virtually any aerospace application. Parker  300/312 Series are straight flared fittings while those of  646/640 Series are 45º elbow flared fittings, both field attachable and intended for use with Stratoflex 111 hoses. They come in different outside diameters (OD) and thread sizes in inches. Please refer to the supplied documentation on offered Stratoflex hoses and fittings or contact us.

AN823 45° Flared Tube & Pipe Thread Elbow Fittings are superseded by those of Military Standard MS20823 and these are superseded in turn by SAE-AS5196 standard. These fittings are  offered as part of AVIATIONEU NEW ERA product lines in steel or aluminum in different tube outer diameters and thread sizes in inches. Aluminum fittings are designated by the letter "D" after the suffix number.

AVIATIONEU NEW ERA air relief valves can be used in different industrial applications. They are made from different materials,  EN 1AL (free cutting steel), 1SMnPb30+C or SAE 12L13  and zinc plated. Available in the following sizes:

Metric: M10 x 1 ARV

British Standard Pipe (BSP): 1/8" BSP ARV

U.S. National Pipe Thread (NPT): 1/8" NPT ARV, 1/4" NPT ARV

Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

Hoses and fittings most suited to naval and marine applications are included in this listing. They are offered by DANFOSS EATON AEROQUIP® brand and other manufacturers, such as HYDRASEARCH or REPUBLIC BRASS SALES. Made from different materials & reinforcements they are available in different internal tube diameters (I.D.) in inches and lengths in feet. Depending on the hose, they can be used within their maximum operating pressure with a range of fluids (e.g. gasoline, crude, fuel and lubricating oils, air, water or hydraulic fluids) and conform to different Military specifications mentioned below. 

MIL-DTL-3992 Air brake hose 

MIL-DTL-8794 Medium-pressure wire-braid hose 

MIL-DTL-13444 Rubber fuel and oil hose 

MIL-DTL-13531 Rubber hydraulic hose 

MIL-DTL-52471 Rubber hydraulic hose 

MIL-H-24135 Wire-reinforced rubber hose 

MIL-H-24595 Wire-reinforced rubber hose 

MIL-H-24136 Fiber-reinforced rubber hose 

For additional information please consult the supplied documentation or contact us.

EATON AEROQUIP® brand name represents quality and innovation for aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Following the acquisition of Eaton’s hydraulics business by DANFOSS, EATON AEROQUIP® products form now part of DANFOSS product portfolio.

DANFOSS EATON AEROQUIP® BLIND-MATE quick disconnect couplings are utilized in advanced liquid cooled electronics and avionics thermal management systems. These couplings are used between removable cold plates and fixed manifolds to allow for quick leak free removal and replacement of both evaporative and liquid flow through systems. Blind-mate couplings provide unequaled performance in pressure drop, radial misalignment, and envelope. In addition, these couplings incorporate a patented integral thermal relief feature that prevents pressure buildup when the liquid cooling module is disconnected. Like other EATON AEROQUIP® quick disconnect couplings, they can be ordered as separate halves. Available in different sizes.

AEROQUIP® BLIND-MATE  couplings have been tested to meet or exceed SAE AS5072 for modular style couplings. These requirements include:

• Ability to operate within a temperature range of –65°F to +160°F (-54°C to +71°C)

• Capable of enduring 1000 connect/disconnect cycles without evidence of malfunction, leakage or damage

• Standard operating pressure of 150 PSI, proof pressure of 225 PSI, and burst pressure of 375 PSI

• Ability to tolerate proof and burst pressure without rupture or loss of fluid

• Ultra-low spillage during disconnection

• Integral thermal relief valve

• Minimal air inclusion during connection

Applications: Ethylene Glycol Water, Propylene Glycol Water, Polyalphaolefin (PAO) per MIL-C-87252

For additional information please refer to the supplied documentation or contact us.

Note: Special Order items. Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Contact us. 

Tubes, sleeves and fittings from various plastic materials such as Polyethylene (PE), Polyurethane (PU), Polyamide (Nylon, PA), Polypropylene (PP) or Polyvinyl Chloride (PVC)) are used in aerospace and many other industrial sectors for a range of hydraulic, pneumatic, instrumentation, insulation and other applications. 

Plastic tubes sleeves  combine durability and flexibility with low cost and light weight. Depending on the selected tube/sleeve, and intended use, they have resistance properties such as chemical, abrasion, kink, wear and tear resistance, heat resistance, electrical insulation, biocompatibility, and others. Plastic tube fittings come in various configurations, including straight connectors, elbows, tees, and adapters. Common applications include those involving corrosive substances and others where weight reduction is crucial. 

Tubes intended for electrical Insulation in aerospace are typically made of polyvinyl chloride (PVC) and conform with MIL-I-7444 and SAE-AMS-I-7444 standards. They are rigid or flexible tubes with uniform inside and outside diameters in the length, specifically designed to prevent any undesirable flow of current between conductors and other objects.They are used on electrical insulation applications requiring flexibility at low temperatures.

Sourced from leading manufacturers, plastc tubes/sleeves and related fittings are offered in different sizes to meet application requirements and sold in rolls (in the case of tubes or sleeves) or pieces and packs (in the case of fittings). 

For additional information on the supplied products please refer to the Product Description section, the respective documentation included in the Attachment section or contact us.

EATON AEROQUIP® brand name represents quality and innovation for aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Following the acquisition of Eaton’s hydraulics business by DANFOSS, EATON AEROQUIP® products form now part of DANFOSS product portfolio.

DANFOSS EATON AEROQUIP® 816/8846/8891 series flared hose fittings can be used with DANFOSS EATON AEROQUIP® 601 hoses  and are available in different sizes. The 816 series straight hose fittings and 8891 series 90 Deg. hose fittings both consist of a pre-assembled nut/nipple assembly and an internally threaded hose socket. The size 4 fitting has a cadmium plated steel nut and nipple. Sizes 6, 8 and 10 nuts and nipples, and all sizes of sockets, are anodized aluminum. The 8846 series fittings are 45° hose fittings with swivel flared UNJF threads. They are noted for their outstanding performance as a result of a unique lipseal design concept. During assembly the nipple spur cuts a lip in the tube stock of the hose forming the fluid seal. 

For additional information please consult the supplied documentation or contact us.

Note: DANFOSS EATON AEROQUIP® 816 fittings ARE NOT THE SAME as AN816 fittings. Please specify at the time of ordering.

NYLO-SEAL tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are furnished complete with nut/sleeve assemblies, made of acetal copolymer. Since the sleeve snaps into and is retained by the nut there is no fumbling for a loose sleeve. Just insert tube into the fitting and tighten the nut 2 to 2-1/2 full turns. Note: The most frequently used combination of tube and pipe sizes are 1/4" Tube x 1/8" Pipe and 3/8" Tube x1/4" Pipe.