AVIATIONEU TRAINING SYSTEMS & SERVICES, in cooperation with respective database providers, offers aviation database update services on a simplified subscription-based ordering process saving man effort, time and costs for customers. Depending on the navigation devices and update policies of the respective database providers, these updates cover different geographical areas and are available for use in single or multiple devices, as single (one cycle) or multiple scheduled annual update cycles per year. They can be distributed through media (database cards/cartridges) and/or internet downloads (eliminating media and shipping costs). They are often offered as "bundles" combining different databases. Database upgrades are subject to copyright restrictions and are allowed for use only in the specific aircraft and devices specified at the time of ordering. Please refer to individual service presentations or contact us for additional information.
AVIATIONEU NEW ERA Air Relief Valve SKU: AVEUNE-AIRRLFVLV
AVIATIONEU NEW ERA air relief valves can be used in different industrial applications. They are made from different materials, EN 1AL (free cutting steel), 1SMnPb30+C or SAE 12L13 and zinc plated. Available in the following sizes:
Metric: M10 x 1 ARV
British Standard Pipe (BSP): 1/8" BSP ARV
U.S. National Pipe Thread (NPT): 1/8" NPT ARV, 1/4" NPT ARV
Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs. Appearing price is for reference only per pc. Please contact us for a quotation.
20 other products in the same category
Copper wires are conductors of electricity and they are used for a wide range of applications including power generation, power transmission, power distribution, telecommunications, electronics circuitry and others. Apart from the high conductivity copper features durability, tensile strength and corrosion resistance.
AVIATIONEU NEW ERA copper round wire product range includes bare copper, copper, paper insulated copper wires as well as double cotton covered and silver or tinned plated copper wires.
They are offered in rolls in different wire gauges (*). Sold in kilograms except the double cotton covered wire which is sold by the meter. Appearing prices is for reference only per UOM. Please contact us for a quotation.
Bare Copper Wire, Gauge 0-5
Paper Insulated Stranded Wire, Gauge 0-5
Tinned Plated Copper Wire (Temperature 120 deg. C), Gauge 0.2-2
Silver Plated Copper Wire (Voltage up to 1000 V, Flame Retardant), Gauge 0-5
Double Cotton Covered Copper Wire, Gauge 0-5
(*) Wire gauge is a measurement of wire diameter. This determines the amount of electric current a wire can safely carry, as well as its electrical resistance and weight. Please refer to the respective table.
AVIATIONEU NEW ERA Hexagon Socket Head Screws are made of Carbon Steel, Alloy Steel with a Black Oxide or Galvanized finish (depending on the P/N) and a strength class of 4.8 or other as specified by the letter "S" in the P/N. They are fully threaded, coarse type, and produced by certified manufacturers in accordance with DIN 7984 standard. They are offered in competitive prices in different diameters ("M" designated), indicating the screw's diameter in mm and lengths in mm. The thread pitch (the distance between threads measured along the length of the screw) expressed in mm is indicated by the "P" designation in the P/N. Sold in packs of 500, 250 or 50 pieces depending on the selected product. The number of pieces included in each pack is mentioned after "PK" designation.
Extending the range of nut plates (*) comlying with different Military Specifications, anchor nuts for industial (non military) uses are offered as part of AVIATIONEU NEW ERA product lines. Also known as Commercial anchor nuts, they meet DIN, ISO and other standards and are available in Standard and Miniature versions, different types (fixed or floating, one lug, two lugs, corner, etc.), various materials (**) & finishes and in both in Metric (M3 - M12 diameters) and Unified thread types (***). Competitively priced, AVIATIONEU NEW ERA industrial nut plates are cost effective alternatives to the respective OEM parts. They are sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. Please refer to product specifications or contact us.
(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners used in blind mounted panel applications, where hex nuts cannot be used or an attached nut is required for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners.
(**) INCONEL alloy, CRES A-286 alloy,42CrMo4 Steel, C1050 heat treated carbon steel or other steel alloys depending on the manufacturer.
(***) Metric ISO thread used in Europe. Designated by the letter "M" followed by the value of the thread nominal diameter and pitch in millimetres. Unified form thread designations,such as UNC (unified coarse) or UNF (unified fine),have a fixed number of threads per inch with the thread major diameter preceding the designation.
The 12LiS Cordless Screw Gun from AVIATIONEU NEW ERA product line is an irreplaceable assistant both in life, and on production. This easy, compact screw gun with a rated voltage of 12 V features:
- a speed of 0-350/1200 rpm,
- boss size: 10 mm,
- torque 15 nanometers,
- 2 accumulators with capacity 2 Ach providing long time to perform required works,
- battery built-in indicators to show when the accumulator needs to be charged
- rubberized handles.
- one year manufacturer's guarantee
AVIATIONEU NEW ERA 12LiS Cordless Screw Gun is delivered in a convenient plastic case, with a set of 2 Li-ion accumulators, the accumulator charging device and a trial nozzle.
AVIATIONEU NEW ERA heat treated aluminum sheets from 2024 alloy are are sourced from certified manufacturers, they are competitively priced and offered in various tempers such as T3,T4,T5,T6 and T651 to be used in a range of aviation and industrial applications. Available in different thicknesses, widths and lengths. Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Approximate time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.
Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.
AVIATIONEU NEW ERA ASTM A193 Grade B6 Series stainless steel stud bolts are manufactured from the ferritic grade AISI 410 stainless steel and can be heat-treated and machined to minimum of 110-ksi or 760 Mpa tensile strength. Like other fasteners in this seies, apart from their high tensile strength, they exhibit excellent resistance to corrosion, durability as well as a long functional work life. They can be used in different applications in industries that demand high tensile strength and corrosion resistance. Sourced by certified manufacturers they are competively priced and offered in different diameters and lengths. Sold by the piece (pc.) in increments of 10 pieces with Minimum Order Quantity (MOQ) 100 pieces. Appearing price is for reference only and differentiates based on wanted bolt sizes. Please contact us for a quotation.
AN hex head bolts in different series are offered under AVIATIONEU NEW ERA product series. Sourced from quality vendors, these bolts are manufactured to the US Army-Navy (AN) standard, predecessor to Mil-Spec (MS), superseded by the National Aerospace Standard (NAS). Commonly used in aviation for either tensile/shear load applications. Made from high-strength type 4037 or 8740 alloy steel or 431 Stainless Steel (CRES) and cadmium plated for superior corrosion resistance (compared to commercial grade zinc plated bolts) they are offered with shank drilled for cotter pin or undrilled for stop nut application, and with a drilled head for safety wire or without. Minimum Tensile Strength (Steel and CRES) - 125,000psi. The length of AN aircraft bolts is measured from under the head to the end of the shank. The "grip" is the unthreaded portion of the shank. Threads are pressed into the steel, not cut, thus maintaining strength throughout the entire shank. The surface under the head of AN bolts is designed to be a bearing surface to reduce non-uniform stress as the bolt is torqued thus reducing premature fatigue. The following letters are used in the product part numbers.
"A" after the dash number for bolts with undrilled shank
"C" for bolts made of 431 Stainless Steel (CRES)
"H" after the AN number for bolts with drilled head (eg. AN6H-15)
AN3 through AN20 Series bolts are superseded by NASM3 through 20 Series. The part numbers in both series have not been changed.
AN3 through AN20 (REV. 12), Military Specification Sheet: Bolt -Machine, Aircraft [superseded by NASM3 through 20]. This specification covers aircraft machine bolts part numbers, AN3, AN4, AN5, AN6, AN7, AN8, AN9, AN10, AN14, AN16, AN17, AN18, and AN20. AN3 THRU AN20 is canceled and superseded by NASM3 THRU NASM20. The Part Identification Number (PIN) for AN3 THRU AN20 REV. 12 and the part number for NASM3 THRU NASM20 are identical. The part numbers have not been changed.
AVIATIONEU NEW ERA extruded rectangular bars from 5052 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM specification and offered as Fabriacted (F) or H112 tempered. Used in aviation and industrial applications. They are available in dimensions 3.0 mm (1/8') -100 mm (3-15/16") × 10 mm (25/64") -300 mm (11 13/16") and length up to 12000 mm (12 m). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.
Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.
Floating nut plates are low profile and lightweight nut plates used to install a captive nut behind a panel. The floating nut plate (aka anchor nut) allows for an assembly that is not perfectly aligned.
MS21059/MS21060 Series nut plates (*) are offered as part of AVIATIONEU NEW ERA product lines. Sourced from quality manufacturers they are floating low height self-locking, two lug anchor nuts. Those included in MS21059 series are manufactured from cadmium plated carbon steel while the MS21060 nutplates are produced from corrosion resistant steel (CRES) and silver plated. They are available in different Unified thread sizes, with plain or countersunk rivet holes on each side and come with or without a dry film lube.
Nut plates with a dry film lube are specified by the letter "L" in the part number. Nut plates with countersunk rivet holes are specified by the letter "K" at the end of the part number.
Competitively priced, these nut plates are cost effective alternatives to the respective OEM parts. They are usually sold in pieces but packs are also used where the number of anchor nuts per pack is indicated after the letters "PK" in the product SKU. Appearing prices are always for the used units of measurement each time. For additional information, please refer to the product specifications or contact us.
(*) Anchor nuts (aka nut plates or anchor plates) are stamped sheet metal fasteners are used in blind mounted panel applications, where it is impractical to use hex nuts or where it is desirable to have an attached nut for ease of maintenance. They are usually riveted to a workpiece and have an internally threaded tube and a plate with two clearance holes for rivets. These terms are used interchangeably to describe the respective fasteners.
AVIATIONEU NEW ERA 4130/4140 ASTM A519 seamless cold-formed pipes are sourced from certified manufacturers, they are competitively priced and offered in rectangular or square shapes. They are intended for use in structural applications and are offered in different sizes of wall thickness, outer dimensions and cut lengths. Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 5 US Tons. Sea/sea-surface transport to destination. Approximate time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please refer to the attached chart for additional information and contact us for quotation.
AVIATIONEU NEW ERA Screw Removal Wrench is intended for use as a removal tool of stuck Phillips head screws.
AVIATIONEU NEW ERA drill type pneumatic sanders provide cost-effective solutions for stripping and grinding of metals in a wide range of applications. They are robust, durable, powerful and reliable tools, offered as pistol (PM-33-140) or direct sanders (PMZ-31-250, MP-006, PMZ-01-17000) and they can operate with different sander attachments such as abrasive wheels, burrs, metal brushes and others.
The PM-33-140 pistol sander was developed for the aerospace industry and is designed to work on high-strength steels, cast iron and non-ferrous metals.
The PMZ-31-250 direct sander has been designed for stripping and grinding of metal parts during assembly and repair works.
The MP-006 direct sander can be used for processing and grinding of molds and dies as well as for cleaning and surface finishing of parts and welds. This lightweight comfortable pneumatic direct sander with rotation speed 30000 rpm provides high quality processing.
The PMZ-01-17000 direct sander is intended for use in cleaning metal surfaces, for the treatment of weld seams and edges while it can also be used for the processing of solid wood and plastic. This easy and compact direct pneumatic sander is useful for working on hard-to-reach surfaces and confined spaces.
AVIATIONEU NEW ERA product line of fire extinguishers includes both portable (with a total mass of 5-20 kg) and mobile extinguishers of over 35 kg, moved by a trolley. They come in different sizes and types including:
- Powder multi-purpose fire extinguishers suitable for A, B and C fire classes,
- Carbon Dioxide fire extinguishers (CO2), one of the cleanest types of extinguishers,mainly intended for use on class B fires,
- Water mist extinguishers for use on classes A, B and C fires as well as K (cooking) fires,
- Wet Chemical extinguishers mostly used on class K fires.
- Foam fire extinguishers suitable for class A and the flammable liquids of class B, though not effective for gaseous fires.
- Clean Agent fire extinguishers which are gaseous fire suppression type. The gas in the extinguisher (often a BCF, such as Halon 1211/Freon 12B1) is stored in liquid form but converts to gas form when released in the air. Halon 1211/1301 extinguishers are widely used in Aviaton.
-simplicity in operation and maintenance,
-fast actuation and convenience in work,
-environmental friendly (depending on extinguisher type)
-long service life (up to 10 years depending on extinguisher type)
With a modern design, a rigid full composite structure, spacious cabin and a panel equipped with advanced avionics and instruments, PICA 2 Ultralight/LSA single engine low wing aeroplane from H.F DORNA stands out from competition. However, what cathes the eye on the ground becomes an unforgettable flying experience due to the PICA 2 high performance as a result of the aeroplane construction, the powerful BPR-ROTAX 912 UL S2 100 HP engine and the 3-blade SR200B ground adjustable WOODCOMP propeller. Designed and built in strict conformance with ASTM International standard, with a MTOW of 600 kg, PICA 2 aeroplane qualifies for Ultralight certification under present national rules in the EU countries where the previous 450 kg weight limit has been replaced by a 600 kg (1,320 pounds) MTOW. It also qualifies for operations in the U.S. or other countries accepting FAA Light Sport Aircraft (LSA) certification regulations. Running on MOGAS (95 octane unleaded) or AVGAS 100LL fuel and exhibiting a Low Direct Operating Cost, the PICA 2 Ultralight aeroplane is offered under AVIATIONEU NEW ERA Lease or Buy Programs as a multi purpose aircraft for recreational and business flying, pilot training, aeroclub operations, surveillance or other missions. Depending on the leasing or buy option, a range of support services (*) are also offered including initial airworthiness certification in the country of operations, user training on aircraft operations, supply of spare parts and consummables, aircraft maintenance, insurance etc. For additional information please refer to the supplied documentation or contact us.
(*) Some of these services are prerequisites in the leasing option.
AVIATIONEU NEW ERA extruded round bars/rods from 5052 aluminum alloy are competitively priced, sourced from certified manufacturers, produced as per ASTM specification and offered as Fabriacted (F) or H112 tempered. Used in aviation and industrial applications (constructions, transportation tools, etc). They are available in outer diameters 6 mm (15/64'') -300 mm (11-13/16") and length up to 12000 mm (12 m). Unit of measurement is 1 US Ton with Minimum Order Quantity (MOQ) 1 US Ton. Sea/sea-surface transport to destination. Appr. time for shipping: 1 month from the time of order payment. Appearing price is indicative per unit of sale. Please contact us for for additional information and quotation.
Our Quick Guide for Aluminum Alloys & Tempers is now available. Please see attached file.
The AVIATIONEU NEW ERA MS-20 (or MC-20 in Cyrillic) is a petroleum based aviation oil for selective cleaning, produced from non-paraffined crude oil with low sulfur content. Ιτ has high viscosity, excellent adhesion, good lubricating qualities and flash point at no less than 265ºC. Intended uses include piston aircraft engines, oil-mixtures with oils MS-8P and MS-8 (in different proportions) in lubricating systems of turboprop engines, feathering hinges of helicopter rotor heads, lubricating engine compressors of gas compressor units, speed governors of diesel engines with self-contained oil systems and crankcases as well as a base component of many lubricating oils and greases. The MS-20/MC-20 oil is offered in different packaging options as alternative for other produccts such as AeroShell 100 Piston Engine. Meets GOST specification: МС-20 ГОСТ GOST 21743-76.
- Deterging properties
- Minimum deposits in combustion chambers, spark plugs, rings, pistons, and other components
- Reduced wear
- Increased equipment reliability
- High oxidative and thermal stability
- Strict quality control over the whole manufacturing process
- Easier cold starting
- Excellent high temperature properties
These AVIATIONEU NEW ERA hexagon locking nuts comform with ASTM A194 standard specification for carbon, alloy and stainless steel nuts used in high pressure, temperature or other special-purpose applications. They can be indicatively used in the process industries, such as petroleum and chemicals for pressure vessels, valves, flanges, and fittings. Sourced by certified manufacturers these nuts are competitively priced and offered in metric (M3 - M36 diameter) or inch (3/16" - 1.1/2") sizes, different thread types and grade range to meet respective design, service conditions, mechanical properties, and high temperature requirements. Please refer to ASTM A194 specification table for additional information. Sold in packs of 100 pcs each. Appearing price is for reference only per pack. Please contact us for a quotation.
A wide range of tube less (TL), tube type (TT) tires and matching tubes are now offered under AVIATION NEW ERA brand for use in main and nose wheel applications in general aviation, commercial, military aircraft and other projects. Tires are available in different sizes, thread pattern types, rim diameters, ply ratings to meet respective rated load and pressure requirements of intended applications. Aircraft tires are typically classified into different categories or "types"with different size and strength designations used and specified in the tire SKU. For additional information please refer to the Product Description section.
For tube type tires, matching tubes with straight or bent valves are also offered. All tires and tubes are supplied with a standard Certificate of Conformance. If additional certification is required please specify at order placement as this may apply additional cost.
A.RAYMOND/TINNERMAN® popular fasteners are conveniently packed and offered as part of AVIATIONEU NEW ERA product lines to serve different application requirements. Sold individualy, each AVIATIONEU NEW ERA pack contains a specified number of fasteners corresponding to the respective TINNERMAN® part number. The number of fasteners per pack is indicated after the letters "PK" in the product SKU.
The following list is indicative of packs of TINNERMAN® nuts currently offered with respective pieces per pack. Other packs of TINNERMAN® part numbers shall be added from time to time. For packs of other TINNERMAN® fasteners, please refer the respective product presentations or contoct us.
TINNERMAN® U-Type Nuts:
TINNERMAN® Anchor Nuts:
TINNERMAN® Flat-Type Nuts:
C7000-8-24 TINNERMAN Style Flat-Type Nut,50 pcs.