The  PARKER HANNIFIN (Hose Products Divisionn) offers the following series of Medium & High Pressure hydraulic hoses compatible with No-Skive fittings.

- BCH Series braided and SX Series spiral hoses meeting international technical standards. More recently developed they are intended for demanding small and medium OEMs and general distribution,

- ELITE No-Skive braided and Parkrimp® No-Skive spiral hoses, exceeding the standards and highly appreciated in the very demanding MRO and OEM markets.

- GLOBALCORE™ State-of-the-art  hose product range, exceeding the newest ISO 18752 and providing technical and economical excellence to the most demanding customers. 

Good, Better, Best classification system is used for easier hose and fitting understanding and selection with superior performance of Best hoses versus their Better and Good counterparts including: 

- Bend radius up to 50% smaller

- Flexibility (bending force) up to 30% higher

- Weight up to 20% lower

- Dimensions up to 25% smaller area

- Impulse resistance and service life up to four times higher

- Working temperature up to 25% higher

Agriculture is one of the typical markets and applications where Good hoses and fittings are the preferred product selection.

For additional information please refer to the supplied documentation or contact us.

NAS1922/NAS1924 series clamps are light-weight, aircraft application clamps from 300-series stainless steel available with either a 1/4" round slotted screw or a 1/4" slotted hex-head screw. 

NAS1922/NAS1924 series clamps are included as part of our own branded (AVIATIONEU NEW ERA) product lines. They are available in different sizes (NAS1924 clamps are available in sizes 48 & above). Both screw styles can be supplied with optional lock wire hole for tamper resistance. Black Oxide coated band versions (designated by the letter "L" in the part number) are also offered for increased wear resistance.

The following designators in the product reference number (SKU) indicate the different versions:

-1 Clamp with round slotted screw

-3 Clamp with slotted hex-head screw

-1H Clamp with round slotted screw & lock wire hole

-3H Clamp with slotted hex-head screw & lock wire hole

NAS1922/NAS1924 series clamps are sold in pieces or packs of specified number of pieces indicated after the letters "PK" in the product reference number (SKU).

Please refer to the attached documentation of the effective diameter range for different part numbers.

Non-latching automatic self-sealing and Thread-Lok Quick Disconnect (QD) valved hose couplings are manufactured by the Stratoflex Products Division of Parker Hannifin Corporation.

Automatic couplings are recommended for use with today's advanced precision fluid systems for space flight, aircraft, ground and undersea applications. Stratoflex non-latching automatic self-sealing couplings are designed for use in diverse applications like electronic cooling systems, hydraulic accumulators/cylinders, brake systems, manifolds, vapor cycle and cryogenic systems. Automatic couplings are best utilized where space is limited, and hands off operation is required. Small envelope, high performance and unsurpassed reliability are key features of Stratoflex non-latching couplings. Available in different tube sizes, from sub-miniature to one inch in aluminum alloy, stainless steel, titanium and other exotic materials. They meet SAE Aerospace Standards AS4251,AS5072/1/2/3.

The Parker Stratoflex’s Thread-Lok Quick Disconnect (QD) valved couplings provide a proven solution for fluid conveyance systems  for aerospace and derivative markets when envelope and weight are important and robust performance is critical. Applications range from hydraulic, fuel, and cooling systems to pneumatic, air data systems, landing gears, wheel and brakes hydraulic fluid motors, military ground vehicles and space applications. Their respective Thread-Lok Ground Service Equipment (GSE) Quick Disconnect (QD) couplings are intended for use with fluid conveyance systems providing a robust connection for ground service equipment to the aircraft flight systems. The Thread-Lok QD is used in a wide range of pressure and temperature applications.

They integrate a highly reliable and robust positive locking mechanism to ensure the performance needed in difficult aircraft system environments such as the engine nacelle, landing gear and brake systems, and other QD demanding installations . The Thread-Lok QD couplings can be used in a wide range of pressure and temperature applications while they provide a simple one-hand operation to thread the QD halves together with a visual confirmation of proper and full coupling to improve both time and safety. 

The Thread-Lok QDs incorporate tang and slot design, with QDs engaging and locking in one position when the coupling halves are threaded together and fully connected, providing both visual and touch indication of the fully connected position. They use Parker’s efficient, self-sealing valve design that permits fluid flow with minimum pressure loss and turbulence.

Available in different tube sizes, from ¼ to one inch. Their stainless steel construction meets typical electrical bonding requirements.They meet or exceed MIL-C-25427 and AS1709 specifications.

For additional information please consult the Product Description section, the supplied documentation or contact us.

EATON AEROQUIP® brand name represents quality and innovation for aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Following the acquisition of Eaton’s hydraulics business by DANFOSS, EATON AEROQUIP® products form now part of DANFOSS product portfolio.

DANFOSS EATON AEROQUIP® BLIND-MATE quick disconnect couplings are utilized in advanced liquid cooled electronics and avionics thermal management systems. These couplings are used between removable cold plates and fixed manifolds to allow for quick leak free removal and replacement of both evaporative and liquid flow through systems. Blind-mate couplings provide unequaled performance in pressure drop, radial misalignment, and envelope. In addition, these couplings incorporate a patented integral thermal relief feature that prevents pressure buildup when the liquid cooling module is disconnected. Like other EATON AEROQUIP® quick disconnect couplings, they can be ordered as separate halves. Available in different sizes.

AEROQUIP® BLIND-MATE  couplings have been tested to meet or exceed SAE AS5072 for modular style couplings. These requirements include:

• Ability to operate within a temperature range of –65°F to +160°F (-54°C to +71°C)

• Capable of enduring 1000 connect/disconnect cycles without evidence of malfunction, leakage or damage

• Standard operating pressure of 150 PSI, proof pressure of 225 PSI, and burst pressure of 375 PSI

• Ability to tolerate proof and burst pressure without rupture or loss of fluid

• Ultra-low spillage during disconnection

• Integral thermal relief valve

• Minimal air inclusion during connection

Applications: Ethylene Glycol Water, Propylene Glycol Water, Polyalphaolefin (PAO) per MIL-C-87252

For additional information please refer to the supplied documentation or contact us.

Note: Special Order items. Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Contact us. 

The  Parker Aerospace (Stratoflex Products Division) offers a broad array of PTFE, rubber and metal hose and hose assemblies, hose fittings, rigid tube assemblies, couplings, quick disconnects, swivel joints, fuel break-away valves, hydraulic fuses, and flow regulators, and specialty fittings including permanently swaged and welded fittings suitable for virtually any aerospace application. Parker  300/312 Series are straight flared fittings while those of  646/640 Series are 45º elbow flared fittings, both field attachable and intended for use with Stratoflex 111 hoses. They come in different outside diameters (OD) and thread sizes in inches. Please refer to the supplied documentation on offered Stratoflex hoses and fittings or contact us.

SAE-AS5406/AN832 series union tube hydraulic fittings are available as part of our own labelled (AVIATIONEU NEW ERA) product lines in different materials, tube outer diameters and thread sizes in inches. The AN832 series fittings are superseded by the respective fittings of  SAE International standard  SAE-AS5406 series. 

Like their SAE-AS5174/MS24392/AN815 union flared tube counterparts, SAE-AS5406/AN832 series fittings are manufactured from Carbon Steel, Aluminum Alloy, Corrosion Resistant Steel (CRES), Titanium Alloy. The 2 digits after the series code indicate the tubing outer diameter (O.D.)  in inches. The following Material Code Letters in the part numbers indicate the composition of the fitting.

No code letter in part number for Carbon Steel

Code letter “D” for Aluminum Alloy (except 7075-T73)

Code letter “J” for CRES, type 304

Code letter “K” for CRES, type 316

Code letter “S” for CRES, type 347

Code letter “T” for Titanium Alloy 6AL-4V

Code letter “W” for Aluminum Alloy 7075-T73

For example, AS5406D06 union fitting is made from Aluminum Alloy with a tubing outer diameter (O.D.) 3/8". The corresponding union fitting in AN832 series would be AN832-6D.

Depending on their Part Number they are sold in pieces but also in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU).

EATON AEROQUIP® brand name represents quality and innovation for aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Following the acquisition of Eaton’s hydraulics business by DANFOSS, EATON AEROQUIP® products form now part of DANFOSS product portfolio.

DANFOSS EATON AEROQUIP® wire reinforced synthetic rubber hoses are offered in different series (types) described below to meet respective application requirements. 

The AE701 hoses consist an upgraded version and a direct replacement for old 601 ones, widely used for aircraft fuel and oil lines where flexibility and light weight are prime considerations. They are made from specially formulated synthetic rubber  inner tube with two layers of stainless steel wire outer braid reinforcement.  Because of their lighter weight and lower operating pressure than type 303 hose, AE701 hoses are not recommended for hydraulic lines. The AE501 hoses are AE701 hoses overlaid with a blue braided chafeguard cover of tough polyester yarn. Both AE701 and  AE501 hoses meet MIL-H-83797, TSO C53a,Type A specification.

The AE401 series hoses are AE701 hoses with an integral cover of silicone rubber compound. They meet MIL-H-83797, TSO C53a,Type C specification.

Product Features:

Flexibility

Light weight

Non-age sensitive (no shelf life)

Fluid temperatures: -65°F (-54°C) to +300°F (+149°C)

TSO C53a, Type A and Type C approvals (with fire sleeve)

Mil-Spec Approvals: MIL-H-83796/1 through MIL-H-83796/9 Assemblies & MIL-H-83797 Hose, MIL-F-83798 Fittings

Field attachable fittings

Applications:  fuel, engine oil and coolants. 

Available in different tubing sizes and internal diameters in inches. Priced and sold by the foot.

For additional information please refer to the supplied documentation ot contact us.

Hydraulic  & pneumatic fittings (also called compressed air connectors)  are used today in a wide range of applications as a connection for conductors such as hoses, tubes, pipes and machinery carrying fluids or gas and compressed air respectively to maintain their pressure without leakage. Whether their intended use is for fluids (hydraulic) or gas/compressed air (pneumatic) they are manufactured in a range of materials from plastic and aluminum to steel and stainless steel for maximum corrosion and chemical resistance. They come in different specifications (for military,aerospace or industrial uses), different thread types, such as British Standard Pipe (BSP) or U.S. National Pipe Thread (NPT/PTF) and sizes in inch or metric systems. Depending on the specific conductor/fitting application requirement different fittings are selected. Push-in fittings are quick and easy to install, connect and disconnect, even multiple times. Compressed air couplings,consisting of a socket and plug combination are self-sealing connecting components traditionally used for pneumatic tools, hall installations and laboratory equipment.  Compressed air distributors are the ideal choice whenever distribution of compressed air to different systems is required. Different types can be used to direct the compressed air from one access point to several  outputs at the required location.

Hydraulic  & pneumatic fittings are offered as OEM parts from well known manufacturers or as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are included in different product presentations throughout our Web Platform. In addition, a comprehensive range of tools and accessories (separately presented) are also offered ranging from connecting and disconnecting pliers, tubing and pipe cutters to union nuts, sealing caps, hollow bolts, hose clips, tubing straps and others.

Extending our range of offered fittings for hydraulic systems and fluid power applications, JIC (Joint Industry Council) 37° flare fittings can be supplied as part of AVIATIONEU NEW ERA product porffolio. JIC fittings share the same 37° flare angle as AN (Army-Navy) fittings, listed separately but they exhibit significant differences in materials, design tolerances, and intended applications. Typically made from carbon steel, stainless steel, or brass, JIC 37° flare fittings are commonly used in agricultural equipment, construction, and general hydraulic industrial applications unlike AN fittings which were originally designed, developed and still widely used for military and aerospace applications meeting their strict performance requirements. Although JIC fittings are often interchangeable with AN fittings and also a cost-effective alternative for less demanding applications, AN fittings should be a prefered choice for aerospace,  military or critical applications in high-pressure or high-precision environments.

Please consult the supplied documentation or contact us for non listed items.

The EATON AEROQUIP AE102 Aerospace  Firesleeve was specially developed to meet the fire resistance requirements of FAA TSO C53a or TSO-C75. This firesleeve can be indentified by its orange colored outer surface.  It can be used for all fuel, oil, hydraulic, fire extinguisher & propeller feathering lines for "Fire-proof"(*)  hose lines functioning effectively within a continuous operating temperature range of -65F to +450F (-54C to +232C). It is denser and more tightly woven and has more fiberglass than most of the competition. Even the thickness of the protective silicone is better. Available in different internal diameters in inches. Sold by the foot.

The EATON AEROQUIP AE102 can be used with EATON AEROQUIP hoses and 900591B clamps to secure firesleeve material on each end over the basic hose assembly. Please refer to chart for correct size or contact us for additional information. 

(*) Conforming with FAA requirements, "Fire-resistant"hose  lines must withstand a 5-minute exposure under specified flow conditions without failure. "Fire-proof" hose lines must withstand a direct flame for 15 minutes.

AVIATIONEU NEW ERA plain banjo fittings are intended for use in hydraulic pipes in automotive fuel, oil and hydraulic systems. They are available from different materials, mild steel, EN 1AL(free cutting steel), 11SMnPb30, EN 8, stainless steel 202 & 304. Sourced by certified manufacturers these banjo fittings are competitively priced and offered in different Metric sizes (M10x5/16", M12x5/16", M14x5/16", M14x3/8", M16x3/8", M18x3/8", M18x1/2") and different surface treatments (clear /yellow zinc plated, olive green zinc plated, dacromet). Sold by the piece (pc.) with Minimum Order Quantity (MOQ) 1000 pcs.  Appearing price is for reference only per pc. Please contact us for a quotation.

AN823 45° Flared Tube & Pipe Thread Elbow Fittings are superseded by those of Military Standard MS20823 and these are superseded in turn by SAE-AS5196 standard. These fittings are  offered as part of AVIATIONEU NEW ERA product lines in steel or aluminum in different tube outer diameters and thread sizes in inches. Aluminum fittings are designated by the letter "D" after the suffix number.

MIL-DTL 6000D Soft Flexible Aircraft Fuel (*), Oil, Water & Alcohol Rubber Hoses (superseeding MIL-DTL-6000C hoses) are offered as part of our own labeled (AVIATIONEU NEW ERA) product lines. They replace the respective MIL-DTL 6000C hoses.

These hoses are designed to handle oil, alcohol, coolant, and water.  The tube of these hoses is oil resistant with a black cover reinforced with high strength mildew resistant yarns. It withstands extreme temperature conditions from -40 deg. F to +250 deg. F.  Lightweight, flexible and easy-to-handle, they meet or exceed U.S. military specs and consist the right choice for hard-to-get-to spots in tight engine compartments. Their burst pressure is 1000 PSI (400 PSI for the hose with ID 2-1/2 in.). 

AVIATIONEU NEW ERA MIL-DTL 6000D hoses are available in different internal and outer diameters in inches. Priced and sold in feet in one foot increments. The last part of our product reference code (SKU) indicates the inner diameter of the hose in inches.

For additional information please refer to the supplied documentation or contact us.

(*) MIL-DTL 6000D hoses are not recommended for use as fuel lines.

Hose and pipe clamps are significant joining fittings included as part of our own branded (AVIATIONEU NEW ERA) product lines. Sourced from quality ISO certified producers, AVIATIONEU NEW ERA hose clamps are available in diferent styles, such as American, German, British or European, materials and finishes (steel,zinc plated or stainless steel)  as well as technical specifications (structure, clamp size (diameter range), band width, band  thickness and screw type). The right combination of clamp style and technical characteristics ensures compliance of the clamp with requirements for general use or a wide range of applications in different sectors (automotive, construction, industrial and others) to ensure their operational integrity and safety. They are sold in packs with the number of clamps included in each pack designated after the letters "PK" in the product reference number (SKU). 

The following letters in the product reference number (SKU) indicate:

A: American Style

GM: German Style

B: British Style

EU: European Style

T: T Style

xxx-xxx: Clamp Range (Size) min and max diadeter of the clamp

W1:All steel,zinc plated

W2:Band and Housing stainless steel,steel screw

W4:All stainless steel(SS201,SS301,SS304,SS316)

To find the best clamp for your needs please consult the supplied documentation or contact us.

NYLO-SEAL tube fittings are exceptionally strong. The bodies, made of nylon, are stronger than machined fittings of similar composition. They are furnished complete with nut/sleeve assemblies, made of acetal copolymer. Since the sleeve snaps into and is retained by the nut there is no fumbling for a loose sleeve. Just insert tube into the fitting and tighten the nut 2 to 2-1/2 full turns. Note: The most frequently used combination of tube and pipe sizes are 1/4" Tube x 1/8" Pipe and 3/8" Tube x1/4" Pipe.

EATON AEROQUIP® brand name represents quality and innovation for aerospace and other industrial applications with a wide range of hoses, fittings, couplings and connectors available to cover application requirements. Following the acquisition of Eaton’s hydraulics business by DANFOSS, EATON AEROQUIP® products form now part of DANFOSS product portfolio. 

DANFOSS EATON AEROQUIP® 491 and 471 hose fittings consist of an AN818 style nut, an externally threaded 37 nipple and an internally threaded hose socket. Fittings of sizes 3 through 6 have nuts and nipples of cadmium plated steel. Nuts and nipples for size 8 and larger are of anodized aluminum. Fittings conform to MS24587. Available in different tube and thread sizes in inches.

For additional information please consult the supplied documentation or contact us.

POLY-FLO tube is a flexible, economical thermoplastic tube fabricated from high molecular weight polyethylene for improved strength. The base resin has the greatest resistance to environmental stress cracking of all the regular polyethylenes. Used for instrument or pneumatic lines. Use Nylo-Seal fittings (259-N inserts are required), nylon or polyethylene hose fittings such as 0710-153. It meets A.S.T.M. D-1248-60T, Type 1, Class A, Grade 4 and Federal Specification LP- 590, Type 2, Grade 7. Color:- natural.

POLY-FLO tubes are sold by the foot.

In close co-operation with their respective quality manufacturers, AVIATIONEU NEW ERA industrial hoses address application requirements in many different industries. Combined with an extensive range of available fittings they consist cost-effective solutions with their high quality, cost savings and prompt deliveries.  Apart from the hoses, custom hose assemblies can be furnished with fittings pre-installed as per customer specifications.

Hoses are sold in feet or meters and fittings or hose assemblies in pieces. For additional information please consult the Product Description section or contact us for a quotation.

DANFOSS EATON SYNFLEX® subsea hoses and bundles are built to meet and exceed the most demanding industry requirements. Their rigorous hose qualification ensures long hose service life while their robust construction enables them to withstand high pressures. They are offered in long, continuous lengths to cover requirements of diverse applications all over the world.

At its core, SYNFLEX® High Pressure hose is a smooth, seamless, continuous extrusion of Nylon 11 Besno P40 TLO. The hose is reinforced with premium aramid fiber and jacketed with a highly UV resistant thermoplastic for long term aging and resistance to hydrolysis. Long continuous lengths are available for subsea bundles and single line applications. Available in 3,000, 5,000, 10,000, and 15,000 psi working pressures these hoses are lightweight, easy to install and assemble, and available in multiple sizes and long continuous lengths. Used in a wide range of applications including Hydraulic flying leads, workover umbilical components, hot lines, chemical, water and nitrogen injections and  subsea blow out prevention (BOP) bundles and hot lines enabling faster and more effective response to subsea events.

Like in other SYNFLEX® hoses, approved Eaton components are offered to ensure complete hose assembly systems. 

Hoses are priced and sold by the foot unless otherwise specified. Fittings can be separately purchased in pieces.

For additional information on different products please consult the Product Description section, supplied documentation or contact us.

AN822 90° Flared Tube & Pipe Thread Elbow Fittings are superseded by those of Military Standard MS20822 and these are superseded in turn by SAE-AS5195 standard. These fittings are made from different materials such as carbon steel, aluminum or corrosion resistant steel (stainless steel), sourced from quality manufacturers and offered as part of our own labelled (AVIATIONEU NEW ERA) product lines in different tube outer diameters and NPT thread sizes in inches. The fitting composition is designated by a code letter after the dash number in the part number as follows:

No letter for Carbon Steel

"B" for Copper Alloy

"D" for Aluminum Alloy

"J" for CRES, Class 304

"K" for CRES, Class 316

"S" for CRES, Class 347

"W" for Aluminum Alloy 7075-T73

For additional information please consult the supplied documentation or contact us.

AN840 series of pipe thread hose nipple fittings are offered as part of our own (AVIATIONEU NEW ERA) portfolio of fittings. Sourced from quality producers these fittings can be furnished in aluminum or brass in different tube internal diameters and thread sizes in inches.Aluminum are designated by the letter "D" after the suffix number of the product reference number (SKU).