An oil pressure sensor is a device used to measure the oil pressure on an engine. The term oil pressure sensor is often used to denote  at least two different and distinct types of sensor - an oil pressure switch and and oil pressure sender.

An oil pressure switch is an egine protection device. It is a mechanical device that has a switch inside. The oil pressure switch may be 1, 2, or 3 insulated terminals (pins). Traditionally most oil switches for protection close when they activate, to show low oil pressure. 

An oil pressure sender is a device that senses the oil pressure of an engine and transmits it to the engine or machine controller. It is used as a generator protection device, to display the oil pressure to a user or for logging and diagnostic purposes. Unlike an oil pressure switch, it can display a range of readings.

Oil pressure sensors are used aircrafts and offered either as parts from the respective OEMs or as replacement parts from third parties. They are alternatively termed as HOBBS switches.

Please refer to the manufacturer Illustrated Part Cataloge (IPC) or the technical specifications of offered sensiors to select the right sensor for your application.

RBC SAE-AS7949 MS27646 B500DD Series Airframe Control Extra Light Torque Tube Ball Bearings are single row, self-aligning, extra light duty ball bearings with PTFE seals and cadmium plated exposed surfaces except bore, caps, and seals. This series is dimensionally interchangeable with the unsealed B500 series. MS27646 B500DD Series bearings are prelubricated for life and are also offered with CRES 440C material and/or zinc nickel plating per OEM specifications. Please refer to the attached reference chart.

NEWTON CONSULTING manufactures and offers Aero extensive range of fue/oiI/water tank caps and special fittings for use on most of the worlds super cars and bikes and many light aircraft (Adam, CAP, Cirrus, Diamond, Lancair Columbia, Lancair kits, Nemesis, Vans, Velocity and others). Their centres are forged from 6063 or 6082 aluminum and then polished and anodised. The high precision and easy to operate mechanism is very secure and non vented. The flanges are diamond turned and again polished and anodised.  Cap assemblies come complete with cap, gasket, and flanges as ordered. Two keys come with the locking version. Fixing can be by rivet, bolt, weld or glass in as appropriate. Attach o-ring kits are available and can be ordered separately as needed.

Different Aero cap series include:

The Aero 200 series, the smallest and lightest of Aero filler caps. Available only in non-locking version and with either a 6 hole bolt on flange  (A26S) or a Glass-in flange (A20G).

The Aero 300 series, the first choice among designers and installers, offered as standard (non-locking) or locking versions with four different bolt configurations (0 hole, glass in, 6 hole & 9 hole, flange necks with lead free restrictor flaps and many special flange options to meet application requirements such as:

- F30G for installation into a composite skin.

- F30 GS, ideal for wooden aeroplanes avoiding recesses and doors.

- A30L CIRRUS with a low profile threaded flange designed for Cirrus to enable the cap to be fitted after the wing is painted, avoiding damage, dirt, masking, filling and other nuisances.

- FN362, a 6 hole bolt-on flange with hose neck

- A30L VANS, offered if a metal version is preferred to the lightweight version which now comes as standard with Vans aircraft kits.

- Z3 used in specific circumstances.

- Z30L VANS, a cap/flange offered as a retrofit assembly that will go into the older Vans/Usher cap/ flange.

The Aero 400 series, with lock (L) or without a lock (S) including A48S/L with aluminum flange for direct connection to tank and A4LT, plastic centre for use with Aero 400 flanges.

The Aero 500 series, with lock (L) or without a lock (S) and two standard fixing arrangements: A512S/L with flange for direct connection to tank and A50S/LG, glass in flange, moulded directly into tank vehicle skin.

The Aero 600 series, a super light version of the Aero 500, with a smaller footprint but retailing the same 3 inch (77.0mm) filling hole allowing the cap to be used for all fuels.

For a number of years CLEVELAND WHEELS & BRAKES offered standard organic & heavy-duty asbestos brake linings for their wheels and brakes. In January 1988 these two types of brake linings were discontinued and a single, improved brake lining was introduced with improved performance and durability compared to older linings. Different versions are available to fit aircraft models based on their year of construction. Brake linings are sold as pad only or as kits together the required number of rivets. Most light aircraft take 2 linings per wheel. Extra rivets are also available. Please refer to the attached Application Guide for additional information.

Versatile split red master switch used in virtually all single engine Cessna models since 1970. It can be used in most light aircraft with single alternator systems. Left rocker normally is used for alternator and right half for battery. Amp Rating: 20. The swich housing mount (P/N: S1843-1) is sold separately and can only be ordered together with the switch.

The AL-1 series of Annunciator lights from ELECTRONICS INTERNATIONAL are more attractive, operate on less power and are smaller than the old fashioned indicator lights. These lights are an excellent indicator light for displaying boost pump on, gear status, power on, flags, etc. Also, they can be used as remote warning lights for any E.I. instrument featuring an external warning line. They are available in different light colors, operate on a 12 or 24-volt system and have a service life of over 1000 times that of incandescent bulbs. Mount hole: 5/16" . Size: .4" diameter x 1" depth. The come with 32" leads and E.I. documentation and certifications.

Prevents return fuel flow during normal operation but provides by-pass fuel feed in an emergency if the fuel pump fails. Wt. 1 oz., 2-7/8" long. Use with tube fittings for 3/8" dia. fuel line. Anodized for corrosion resistance. Made in USA

Wheels, used in conjunction with tires, provide support for the tires and weight of the aircraft. Combined with brakes, they assist in directional and stopping control during aircraft ground maneuvers, taxi, takeoff, and landing. Brake assemblies and disc combinations are designed to properly and safely decelerate the aircraft under various conditions. Brake assemblies consist of one or more pistons depending upon the aircraft requirements.
CLEVELAND Aircraft Wheel & Brake Division, a PARKER HANNIFIN business unit, designs and manufactures wheels, brakes & assemblies for worldwide aircraft markets. CLEVELAND brand wheels and brakes are used on more than 80 percent of general aviation aircraft while their wheel assemblies are offered for military and business aviation applications. Their product lines include both TSO'd aircraft wheels, brakes, and wheel and brake assemblies for nose and main wheels to meet a variety of aircraft specifications and brake assembly interfaces. Offered through their worldwide distributor network for quick parts availability. Main and nose wheels are made from either aluminum castings, magnesium castings, or aluminum forgings. The main wheels are of the divided type, incorporating inner wheel half and outer wheel half, plus a disc, which are fastened together with tie bolts, washers, and nuts. They are offered in different models to work with different tire sizes. For example, their main wheel assemblies are designed for 6.00-6 tube tires while their #40-87 nose wheel assemblies are designed for 5.00-5 tube tires. Both are intended for use in general and business aviation, turboprop passenger, and helicopter applications. Sold in single pieces or in pairs whenever specified. Their key features include:
• Low maintenance for tubeless or tube-type
• Tapered roller bearings for dimensional stability and long life
• Molded grease seals for superior bearing bore sealing properties
• Split-rim design to allow ease of tire mounting
• High-strength through-bolts
• Sand castings and forgings
Nose wheel assemblies are made of magnesium or aluminum. Their key features include:
Load Capacity: Static load from 500 to 8600 lbs
Bearing Type: Tapered roller bearings
Size: 4 to 16 inch bead seat diameter
Torque Rating: Nut torque rating 90 to 150 in-lb dry; from 105 to 300 lube torque lb-inch
Weight: 3 to 18 lbs
For more information on the parts and quantities per assembly please refer to the respective illustrative parts list or contact us.
FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.
Appearing prices are for units in NEW Condition. For units in USED Condition (mostly SERVICEABLE/OVERHAULED with proper certification) please contact us for availability and quotation.
Note: NCNR products: non-cancellable/non-returnable once the order is placed. Often require backordering to the manufacturer with significant lead times.

TEKNOFIBRA® is a leading manufacturer of aircraft firewall, exhaust, electrical, fuel system heat and sound absorbing materials. TEKNOFIBRA® product range includes Heat Reflecting Panels, Sleeves, Contacts and Aluminum Adhesive Tapes. The impressive heat-reflecting and insulating characteristics of Teknofibra® products ensure resistance and protection, even at extreme temperatures. Their lightness (lighter in weight than competition) makes them the perfect insulation for aeronautical uses. The organic composition of Teknofibra® non-woven fabric guarantees maximum safety and non-toxicity in every situation. In the event of a fire, no harmful emissions are produced, preserving total safety. Sound absorbing Teknofibra® panels dramatically reduce excessive noise that can distract and compromise results. TEKNOFIBRA® products are widely used in the Aviation, Car Racing and Motorcycling fields.

High Pressure Strut Valve with Small Diameter Thread Adapter. Fits in nose gear of certain Cessna models.

TYCO ELECTRONICS TE CONNECTIVITY™ ARINC 600 Connectors feature a stamped and formed contact system versus the traditional, screw machined contact system. Available in either Solder Tail or Press-fit (eye of the needle) designs.

Being the first to offer size 22 contacts in a press-fit PCB attachment style, their ARINC 600 product portfolio now includes press-fit size 20, 16 and 12 power contacts, as well as press-fit Quadrax contacts providing a total press-fit PCB-attach connector solution.

TE CONNECTIVITY™ ARINC 600 Connectors feature a lighter design for considerable cost savings. The stamped system allows for selective gold plating to only critical socket contact tines instead of the whole contact, decreasing gold plating costs. By changing to hollow contacts instead of the solid contacts in the legacy design, this product design reduces weight by up to 10% (depending on insert arrangement) and includes backward compatibility. All these with the same high levels of performance and reliability.

Features & Benefits

Completely inter-mateable with existing ARINC 600 plug connectors

"Monoblock" single-piece inserts that simplify the manufacturing process, cut costs

Stamped and formed, selectively plated size 22 contacts provide substantial cost savings while delivering excellent performance and reliability

Equivalent electrical performance vs. current design

Available in either Solder Tail or Press-fit (eye of the needle) designs

Up to 10% weight savings per connector (depending on insert arrangement)

Applications

• In-Flight Entertainment

• In-Flight Networks

• Flight Controls and Communication

• Military Ground Vehicles

For additional information please refer to the supplied documentation.

Note: TYCO ELECTRONICS TE CONNECTIVITY™ ARINC 600 Connectors are Special Order items and therefore Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Please contact us. 

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different starter relay assemblies are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Different vacuum pumps are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from the manufacturer. The RAPCO FAA/PMA'd vacuum pump, RA215CC  is used in ROTAX® 912 UL, 912 ULS and 914 UL engines. Please refer to the separate product presentation for RAPCO Dry Air Pumps for vacuum or pressure system applications.

Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

The SPRL fuel locking and non-locking caps have secure sealing and easy finger tip operation. These caps are made from the highest quality modern engineering plastics with Viton o ring seals (which can be easily replaced). The mounting rings are anodized aluminum with the flange recessed to give a perfect flush fit whether it is riveted under a metal skin, as in the RV series, or built into a composite structure. The SPRL caps are non vented and recommended to keep the fuel in, the water out and in the locking version, other unwanted items out of your tank. 

SPRL-L (locking) and SPRL-S (non-locking) fuel  caps have an 65 mm O.D. and can be used on Europa, Compair, Glasair, Lancair, Murphy, OMF, Rocket, Velocity, Zenith and many more experimental aircraft. Wt: 80 grams.

ACS PRODUCTS is a supplier of quality parts and accessories to the aircraft industry while many of their products are also used in a wide variety of other fields including marine, recreational vehicles, and industrial applications. Their product lines include cable assemblies, ignition switches as well as machined and custom products.

ACS Pitot / Pitot Static Tubes include different models. Model 15144 'L' shaped, aluminum pitot heads are simple, inexpensive, good-quality suitable for homebuilts. They are available either as pitot only or pitot static. Both have flange mounting to aid underwing fitting. 

Miniature incandescent and LED lams (bulbs) sourced from different manufacturers such as GENERAL ELECTRIC (GE), NORMAN LAMPS, AMGLO KEMLITE LABORATORIES,AERO-TECH LIGHT BULB Co. and others, for use in various aircraft applications (cockpit/wing/tail lights).

Unless a specific manufacturer is mentioned at the time of ordering and the selected lamp model is in production by this manufacturer, alternative lamps from different manufacturers shall be provided meeting the same or equivalent specifications.

 GE Lighting has been acquired by Tungsram. All bulbs are identical, but packaging may differ at the time of shipment.

Stainless Steel Single Shank Ball for swaging on to wire rope and aircraft cable. Used to terminate aircraft cable ends. Conforms to Mil Specification MS20664C. Available in different breaking strengths (lbs), hole diameters (in.) and for differnt cable sizes (in.).

An extensive range of standard MIL-SPEC and Cessna pulleys and pulley kits is offered by McFARLANE® AVIATION. The kits contain all pulleys and cotter pins required to replace all flight control system pulleys in one airplane containing the respective part numbers and quantities required. Different McFarlane pulley series include: 

MCS378 Series phenolic flight control pulleys with ball bearings, FAA-PMA approved replacements for the Cessna S378, A-/BB-, and NAS383- series pulleys on Cessna Aircraft. The MCS378- series pulleys supersede these for most Cessna aircraft applications and  feature high quality sealed precision ball bearings, superior to low grade, open seal bearings used in the Cessna S378-()L light duty series pulleys that they replace.

MS20219 Series aircraft secondary control pulleys, superseding the respective AN219 series pulleys are offered either with high pressure laminated phenolic sheave (MS20219 Series) or aluminum alloy sheave anodized per MIL-A-8625 (MS20219A Series), both with fixed ball bearing with contact seal. The aluminum body is recommended for -1 and -3 pulleys. The -1 pulley should not be installed in flight control systems.

MS20220 Series flight control pulleys with phenolic body and ball bearings with seal. These supersede the respective AN220- Series pulleys. Also available with aluminum body (MS20220A).

MS24566 Series phenolic flight control pulleys with ball bearings. MS24566 pulleys can be used to replace the corresponding AN210 pulleys designated by the letters "A" or "B" in their dash numbers as they differ in the maximum load limit.

NAS383 Series phenolic commercial grade pulleys with graphite impregnated bronze sleeve bearings. These are typically used with a bushing. The MCS378 pulley replaces both the NAS383 pulley and it's bushing.

S394, S1052-1/ S1710-1 Cessna nylon pulleys with no bearings.

S378-4S Cessna pulley similar to S378-4 but with smaller diameter. Used on Cessna airplanes 177RG s/n 177RG0202 and on, and F177RG0038 and on for routing stabilator, stabilator trim, and rudder cables. Six required per aircraft.

1660433 Series Cessna phenolic pulleys with ball bearings.

MS24665 series cotter pins are also available with the pulley kits or separately in packs of 10 or 25.

Please refer to the individual product presentations, the respective charts provided for specifications and cross-reference information or contact us.

MONARCH D.C. Hydraulic Power Systems are offered in standard M-200, M-300 and M-3500 model series featuring a wide selection of power unit sizes and performance to satisfy most O.E.M. applications, hardcoated pump end plates for unmatched durability in demanding environments and severe duty applications and externally adjustable relief valve with lock nut. Over two million of M series pumps have been sold and used in a variety of applications, including: dump bed kits, dump trailers, auto hauler trailers, compactors, scissor lifts, security gates, lift gates, tow trucks, snow plows, hay bale spikes, handicap ramps/lifts, motorhome slideouts, custom projects, etc. Please refer to the attached documentation for specifications & additional information on offered hydraulic power systems.

OMRON M2C Series cylindrical indicators have the basic design as the A3C pushbutton switches. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier and provide good illumination with even surface brightness. These indicators are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. UL (E41515) and CSA (LR45258) approved. Please consult the supplied documentation for ordering.