FLEETGUARD® filtration product portfolio by ATMUS FILTRATION TECHNOLOGIES includes a wide range of cleaning products for all media, as well as chemical compounds and additives for cooling systems.  With more than 6.000 offered products, including air, oil & fuel filters, fuel /water separators, coolant filters/additives, and hydraulic filters, FLEETGUARD® is the worlds leading filter maker with their products used by a wide range of engine and other manufacturers for buses, trucks, generators, construction machines, marine and agriculture applications. Genuine FLEETGUARD® filters are offered along with their respective replacement parts manufactured to OEM specifications from third manufacturers. For more information please contact us.

Genuine DEUTZ filters provide the highest quality, best filtration performance and long service life leading to optimum protection, consistent performance and low fuel consumption of the engine. DEUTZ Air filters provide reliable filtration of combustion air, preventing dust from entering and causing increased wear inside a combustion engine. DEUTZ Oil filters preserve the engine performance and reliability protecting it from wearing and damage caused by dust, soot and other particles. DEUTZ Fuel filters provide highly efficient separation of harmful particles and water ensuring high fuel quality and engine protection from compromised engine´s performance and shortening of its life cycle.

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered  (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

FS20 series 3/8" fuel selectors provide a choice of lower and side fittings, and all units can be operated with an extension and universal joints. They come in the following types:

Type 1 (FS20-1): simple 3/8” ON/OFF shut off valve with 90 degrees action between the two positions. There are two ports and either port can be used as the inlet or outlet.

Type 2 (FS20-2): Three way 3/8” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 3 (FS20-3): three way selector with the positions LEFT - RIGHT - OFF. Generally used in low wing aircraft with a tank in each wing.

Type 4 (FS20-4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.There are 3 ports. The lower port is the outlet to the engine and can be Male AN-6, Female 1/4NPT or a  360 degree Banjo adjustable fitting with a male AN-6 end.

Type 5 (FS20-5): 4 way Fuel Selector ( 3 tanks and OFF ) with positions LEFT - MAIN - RIGHT - OFF, each at 90 degree intervals.

Type 7 (FS20-7): Newest in the range 3 way fuel selector with positions LEFT - RIGHT - OFF. The inlets are at the 45 degree positions, to the LEFT and RIGHT, and the outlet is at the base of the valve. FS20-7 has been designed for centre consol mounting.

Type 8 (FS20-8): 5 way Fuel Selector ( 4 tanks and OFF ) with positions LEFT TIP - LEFT - RIGHT - RIGHT TIP - OFF, each at 72 degree intervals. 

For additional information please refer to the product presentations, the supplied documentation or contact us.

RAPCO manufactures FAA-PMA approved pneumatic filter replacements for airborne assemblies. RAPCO filters are constructed to the highest industry standards. They utilize a 0.3 micron filtration media which provides superior filtration without undue air flow restriction. They help proper filtration of destructive contamination within an aircraft environment (such as system dirt and dust from the cabin and cigarette smoke) which often lead to the need for replacement of expensive gyro instruments & other components.  When changed on a scheduled basis they can reduce operating costs. 

RAPCO FAA-PMA approved RA-B3-5-1 Garter Filter Element is a filter replacement part for use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Product Specifications:

Garter Filter Element

Polyurethane foam, 1” long x 1-3/4” diam. 

For use on Airborne 133 & 2H3 series regulators and 1J1 series filter assemblies.

Recommended Replacement: 100 hours/ 1 year

RAPCO FAA-PMA approved D-9-18-1 Central Air Filter Element replacement is intended for use with Airborne 1J7-1 filter assembles, for vacuum systems. 

Product Specifications:

Central Air Filter Element.

Pleated filter, screen with bonded rubber end seals. 

3-1/4” long x 2-7/8 diam. 

For use with Airborne 1J7-1 filter assembles, for vacuum systems

Recommended Replacement: 500 hours/ 1 year

Note: 

The products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case. Additional charges may apply.

CONCENTRIC HE Series AC/DC power packs allows the selection from a broad range of standard components to design a power system to meet the exact specifications of applications, both vertical and horizontal, with a full range of valving, motor, pump and reservoir combinations and minimum inventory for maximum cost efficiency. Other advantages of the HE power packs includes low power consumption, quiet operation, proven field performance and long service life. Concentric HE2000 Series AC/DC Power HPUs  can be coupled via suitable hydraulic lines to a wide range of operating mechanisms. They normally operate hydraulic cylinders, but can be used with any other hydraulic actuating device. A unit can individually control up to four (4) hydraulic cylinders.

Product Features:

All units have:

12 or 24 VDC motors

Adjustable internal relief valve preset at factory

Load holding check valve

Reservoirs plumbed for horizontal / vertical mount

Various size cylindrical/rectangular reservoirs

9/16˝-18 SAE outlet and return ports (P/N 1303835 1/4˝-18 NPTF ports)

140 x 170 mesh inlet strainer

Please refer to the attached documentation for specifications & additional information.

HIFI FILTER® offers an extensive and diverse range of standard or tailor-made filters and separators, maintenance kits and accessories for vehicles, machines and processes together with services aiming to be a single supplier of single brand & single part number products replacing multi-brand stocks and providing significant savings  to their customers. 

Today HIFI FILTER® offers filtration & separation solutions covering the needs of diverse sectors from construction, mining & quarrying, agriculture & forestry to parks & roads, marine, handling, on-road, ground support equipment, snow areas, railway, recycling, manufacturing, metals, plastics & rubber, energy, wood industry, construction materials, painting & surface treatment, food and beverages, chemical and industrial processes and textiles.

For more information please refer to the supplied documentation. 

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.For more information on SWAGELOK® products please refer to the supplied documentation.

The CJ AVIATION Inc. is a manufacturer of  FAA-PMA approved fuel pumps for more than 20 years as direct replacements (*) for DUKES fuel pumps installed in Beechcraft, Cessna, Diamond, Maule, Mooney, Lake and Navion aircraft. They can be furnished as NEW or NEW EXCHANGE both priced the same except that for NEW pumps there is no core refund/credit. These pumps feature a rigid construction, tighter tolerance design, redesigned motor and longer seal life. They come with certification (FAA Form 8130-3 ) and a two-year warranty or 300 hours, whichever comes first.

In addition, OVERHAULED EXCHAGE (**) fuel pumps are also offered on respective OEM AIRBORNE, DUKES and WELDON models for use in general aviation and experimental aircraft. The overhauled pumps are serviced in accordance with FAA-approved process specification and certified. These pumps are listed under the respective OEM product presentations.

For additional information please contact us.

(*) When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data. 

(**) In the case of NEW EXCHANGE or OVERHAULED EXCHAGE pumps, these are offered in exchange of an existing customer owned unit (core) for a quick turn around. A refundable core charge is included in the selling price. This is refunded or credited towards future orders with us when a qualified core is returned and its condition is approved by CJ AVIATION within 60 days of the date of the purchase invoice.

FALLS FILTRATION TECHNOLOGIES Inc. (FFT), formerly AIRMAZE Inc., manufactures a wide variety of highest quality plastic and metal air intake systems and their filter element replacements as well as filtration equipment (such as oil, air/oil separation and hydraulic filters) for the industrial, agricultural, and aerospace industries.

Today FFT filtering products are  typically initially installed or used as retrofits on aircraft, agricultural, railroad, construction, trucking and power industries for a wide range of applications including gas and diesel engine filtration, filters for generators and gas compressors, light, commercial, and military aircraft filters, vacuum pump filters, pressure blowers, and filters for locomotives.

FFT AIRMAZE designed product lines include UNIMAZE small filters, MULTIMAZE industrial air intake filters, breathers, air intake panels, oil bath filters, AUTOMAZE self cleaning air filters, and MUFFLEMAZE noise reducers.

FFT AIRMAZE aircraft & military product lines include strainers used from fuel to lube oil, wash flow filters used primarily in throttle control systems, FAA PMA fuel filters, in-line filters and replaceable filter elements. FFT AIRMAZE AM01W052261 fuel filter assembly is a FAA PMA fuel filter approved for installation in  the Lake Model LA-4-200 airplane, replacing older Bendix 450-OK fuel filter.

For additional information on FALLS FILTRATION TECHNOLOGIES product portfolio please refer to the Product Description section and the supplied documentation. Filter element replacements for FFT filters are offered both as OEM parts or equivalent to / interchangeable with FFT parts from other manufacturers. Please refer to our respective product listings.

Manufactured to the highest standards, the Andair standard fuel selector range incorporates 1/4"(FS16), 3/8"(FS20) and the 1/2"(FS25) valves. These valves allow for multiple tank switching of one fuel line. Duplex fuel selectors are also offered by Andair (see separate product presentations). FS16, FS20 and FS25 series of fuel selectors are designed for safety, provide a precise and smooth feel in operation  and come in different types, ranging from Type 1 ON/OFF shut off valves to valves with multiple positions to ensure the right fuel tank selection. Can be supplied with different fittings. To prevent the pilot switching the wrong tank or turning the fuel off they feature  a large red lever with 'Fuel' engraved on it and a clearly labelled fascia plate to indicate which tank has been selected. It allows for a good solid detent at each tank position and also the button on top of the lever must be raised to switch the fuel off.

Designed for use with Light Sport and Ultralight aircraft, FS16 series 1/4" fuel selectors come in the following types:

Type 1 (FS16x1): simple 1/4” ON/OFF shut off valve with 90 degrees action between the two positions. On the FS16x1 there are two ports and either port can be used as the inlet or outlet.

Type 2 (FS16x2): Three way 1/4” fuel selector with positions LEFT-RIGHT-OFF and a 90 degree action between each tank selection. No lower fitting for use where there is little space behind the valve. 

Type 4 (FS16x4): Designed for high wing aircraft, it has four lever positions OFF - LEFT - BOTH – RIGHT with a 90 degree action between each position.On the FS16x4 there are 3 ports. The lower port is the outlet to the engine is 1/8 NPT Female. The inlet, side ports are 1/8 NPT Female and are at the 9 o'clock and 12 o'clock positions when looking at the valve with the brass ball spindle pointing upwards. At the 3 o'clock position there is a blanking plate that covers up a PTFE gland opposing the forces of the other 2 PTFE glands.

Type 2 and Type 4 valves do not allow cross feed between each tank when the selector is in the OFF position.

For additional information please refer to the product presentations, the supplied documentation or contact us.

NEWTON CONSULTING offers a range of SPRL branded fuel valves featuring distinct features that make them better than the rest. Ceramic disks have no soft moving/rubbing seals to wear out, unlike other valves but also give an 'indefinite' life with a very smooth light action. The lift and turn selector of their SPRL valves is instinctive, secure, and easier to use than the complex 'lift button' type. The locking detents avoid accidental movements. The fixings match most installations, and the internal ports prevent cross feeds, unless 'selected to 'Both'. NEWTON offered valves range from simple V1 and V3, designed to minimise stockholding costs to V6, tapped 10mm for standard Rotax banjo's on the input and 1/4" nps output or V9 and V10 duplex valves, threaded 1/4"nps which will accept 1/4"npt fittings and NEWTON AN-6 banjo assembly.Their lightweight alloy construction is anodized for protection while the Viton O-ring seals are suitable for all current fuels. 

NEWTON also offers a variety of adaptors/fittings (purchased separately) which can be used with these valves as normal AN fittings will not fit directly to these valves.  Their offered product portfolio includes AN8 Male NPT 1/4" or 3/8", Female 1/4" NPT, Female 3/8" NPT, Female 14mm used for commercial automotive banjo's and Female 1/4"NPS supplied in their -6 banjo assembly. 

Their Male AN fittings enable plumbing straight into the aeroplane system with no extra fittings to buy. The lightweight alloy construction is anodized for protection. Viton O ring seals, used as  seals to the valve, are suitable for all current fuels. They can be used on experimental aircraft only. 

Switches for different functions, inteneded for use in Piper aircraft. Information on their applicability to different Piper aircraft models and serial numbers is included. For additional information and/or non listed switches please contact us.

Fuel and oil drain valves for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

High Pressure Strut Valve with Small Diameter Thread Adapter. Fits in nose gear of certain Cessna models.

LENZ externally-mounted tank hydraulic suction line strainers are offered in different NPT and SAE series below to cover the needs of a range of applications.They do not require access to the tank interior for ease of servicing and feature perforated steel support tubes, cast iron bushings and 100 mesh stainless steel pleated screens as standard.

Part Numbers include subsections for the Series, the Size, the By-pass Option and the Mesh Oprion of the strainer.

Versions with by-pass options are designated by "-R" and PSI number after the size number of the strainer (e.g. -R3 and -R5 for 3 or 5 PSI by-pass options respectively).

Versions with mesh options, other than 100 mesh stainless steel pleated screen, are indicated by "-" and the number of the mesh option (i.e. -30, -60, -200  for 30, 60 or 200 mesh respectively).

LTF series are male NPT (MNPT) tank strainers designed for flows up to 50 GPM (200 LPM), with 2" X 2" MNPT steel nut. Offered with No by-pass or 5 PSI by-pass and 30, 60 and 200 mesh  options.

LTM series are male NPT (MNPT) to female NPT (FNPT) tank strainers designed for flows up to 200 GPM (750 LPM) with cast iron nut (stainless nut as option). Offered with No by-pass, 3 or 5 PSI by-pass and custom mesh  options.

LTMA series are male SAE (MSAE) to female SAE (FSAE) tank strainers designed for flows up to  40 GPM (160 LPM). They come with Buna o-rings and steel zinc plated bushings. Offered with No by-pass , 3 or 5 PSI by-pass and 30, 60 and 200 mesh  options.

LTMAB series are male SAE (MSAE) to hose barbed tube externally-mounted tank strainers designed for flows up to 40 GPM (160 LPM). They come with 1" to 2" hose beads, Buna o-rings and forged Zinc plated fittings.  Offered with No by-pass, 3 or 5 PSI by-pass and 30, 60 and 200 mesh  options.

For additional information please refer to the supplied documentation.

ARROW PNEUMATICS offers a complete line of filters, regulators, lubricators, desiccant and sintered bronze products which provide coverage for all markets – PBE, Industrial, Automotive Aftermarket, AG, Heavy Duty, etc. Coverage includes a complete line of desiccant products and air control units, not available through all competitors.

ARROW PNEUMATICS hydraulic in-line filters provide protection for small, high pressure systems up to 3,000 PSI. 

Using these filters at the pressure side of a pump, foreign particles 25 microns and larger, such as those created by pump wear, are removed before damage can result to the valving in the system. A sintered bronze element ensures protection against crushing should dirt accumulate and increase pressure drop across the element. The unique construction features an anodized aluminum housing for light weight, and a conically shaped sintered bronze element positioned by a retaining spring to allow true, uninterrupted axial flow. Special viton O-rings are available for oil systems where chemical action may be a problem. The standard 25 micron bronze filter element can be easily cleaned or replaced. Nominal filtration ratings of 90, 40, or 10 microns available.

Available in different NPTF sizes.

Maximum operating pressure: 3000 PSI

Operating temperatures: 35 - 200 deg. F

Modern reciprocating-engine aircraft (especially large and high-performance ones) use electrically operated auxiliary fuel  boost and transfer pumps  to keep fuel moving toward the aircraft engine or move fuel between tanks to balance aircraft weight. Centrifugal boost pumps,  electric motor driven,  are the most common type and  are used to supply,back up the engine-driven fuel pump or transfer fuel between tanks if the aircraft is so designed. They are  most frequently  submerged in the fuel tank or located just outside of the bottom of the tank with the inlet of the pump extending into the tank. Cartridge/canister or in-tank mounted pumps supply fuel to the aircraft engine while reverse flow through the pump is prevented by check valves. The cartridge/canister design allows removal of the pump cartridge without draining the fuel tank. If the pump is mounted outside the tank, a pump removal valve is typically installed so the pump can be removed without draining the fuel tank.

The RAPCO FAA-PMA approved pumps are offered as direct replacements of the respective pumps by OEMs  such as PARKER AIRBORNE or DUKES (please refer to their separate product presentations). The letters " RA" in the beginning of the RAPCO part number are used to denote the correlation of RAPCO part number to the OEM part number. They incorporate modern design, materials, and manufacturing processes to provide high quality and performance fuel pumps at competitive prices. 

These pumps can be furnished  as NEW or OVERHAUL EXCHANGE, namely new or overhauled pumps in exchange of existing customer owned units (cores). In all exchange cases,  the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders with us when our co-operating supplier verifies that the unit is in a reasonable serviceable condition. In the case of overhauled pumps, these are overhauled in accordance with FAA-approved process specification and come with a FAA Form 8130-3. All  RAPCO fuel pumps are thoroughly tested for guaranteed pump performance, with a worldwide distribution and a full warranty (same as OEM). For additional information please consult the supplied documentation (*) or contact us.

(*) The supplied documentation is to be used for reference only. When selecting a part for installation consult the appropriate aircraft maintenace manual, parts catalogue, or equipment list for approved data.   

Made from 14L 12 steel and cadmium plated, SAF-AIR FAA-PMA approved push type fuel drain valves are close tolerance valves of simple design. These valves provide the most trouble free operation of any other line of valves in the industry. SAF-AIR valves are manufactured with an o-ring placed on the stem to seal against a flat seat on the body. This design eliminates an area where dirt can gather, thus putting an end to the main cause of fuel drain valve drip. Available in eight models in two styles with or without 1/4" hose adapter.

MONARCH D.C. Hydraulic Power Systems are offered in standard M-200, M-300 and M-3500 model series featuring a wide selection of power unit sizes and performance to satisfy most O.E.M. applications, hardcoated pump end plates for unmatched durability in demanding environments and severe duty applications and externally adjustable relief valve with lock nut. Over two million of M series pumps have been sold and used in a variety of applications, including: dump bed kits, dump trailers, auto hauler trailers, compactors, scissor lifts, security gates, lift gates, tow trucks, snow plows, hay bale spikes, handicap ramps/lifts, motorhome slideouts, custom projects, etc. Please refer to the attached documentation for specifications & additional information on offered hydraulic power systems.

Honeywell is a leading switch and sensor provider for many HVAC applications, including airflow, VAV control, boiler/chillers, motors, and more.  Products include pressure sensors, digital humidity/temperature sensors, magnetic position sensor ICs, current sensors, pressure switches, basic switches, and more.

Honeywell's MICRO SWITCH switches fill many roles in a wide range of applications, including presence/absence/positioning, inspection/recognition, condition measurement, and operator/machine interface. They range from sealed switches used in high temperature aerospace applications to large cable-pull switches ensuring safety on conveyors.

Honeywell's snap-action basic switches are simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions. 

Honeywell's  Standard families of Basic and Miniature switches include V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.

The Premium families of MICRO SWITCH Large and Subminiature switches are designed for high-precision applications where the cost of a switch failing is high maintaining enhanced accuracy and repeatability. MICRO SWITCH premium basic switches are offered in different series, they feature precise and accurate characteristics. Available in large, miniature, and subminiature switch sizes, MICRO SWITCH premium basics are customizable to provide unique actuators, different terminal combinations, custom characteristics, and even value-added wires… to meet customers’ application requirements. With many Honeywell premium basics, they are tested and certified to a higher cycle count.