ATI® TOOLS 110C series flush straight drive rivets with rubber guard are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

ATI® TOOLS 107A series flush straight drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. Large radii at critical points enable these rivets to withstand continuous rugged use.They are slightly crowned with a highly polished face designed for rapid flush riveting where a smooth skin surface is essential and feature large radii at critical points to prevent breakage, protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

ATI® TOOLS 100A series (straight drive) and 101A series (offset drive) AN470/MS20470 universal-head cup shaped  rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. Respective flush head rivets of ATI® TOOLS 100A/101A series are designated by the letter "F" after the series number (i.e. 100AF/101AF respectively. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401". Available in different rivet sizes, body diameters and lengths in inches.

ATI® TOOLS 106A series flush swivel type rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: Flush Swivel Type. Shank diameter 0.401".  

ATI® TOOLS 105A series AN470/MS20470 universal-head cup shaped double offset drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: AN470/MS20470 universal-head. Shank diameter 0.401".  Available in different rivet sizes, body diameters and lengths in inches.

ATI® TOOLS ATIST1111BK3 anti-slip rivet set, H13 magnetic particle tested. Manufactured to Boeing® specifications. It features polyurethane rim to prevent slipping and damage to skin surfaces. Shank diameter 0.401". Length 2-1/2″. Face diameter 1-1/4″.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. ATI® TOOLS High Speed Steel (HSS) integral pilot countersink cutters are manufactured of M2 high-speed steel or carbide-tipped. They can be used with ATI® TOOLS ATI444 or ATI443 Series microstops. Offered in different pilot diameters, number of flutes and body diameters. Sold in pieces or as sets with other countersink cutters.

Product Features:

High speed steel (HSS) countersinks ground on-centers to insure concentricity

1/2" Body diameter

Integrated pilot of different sizes in inches

2 Flute

120-degree seating angle for standard fit

100 degree cutting angle

1/4-28 Male threaded shank

Please consult the supplied documentation.

High speed steel (HSS) drill bits are extremely hardwearing and particularly well designed for drilling into metal surfaces, as they are much more resistant to the heat generated from the fast speed operation. The front edges cut the material, whilst the spirals remove debris from the hole. ATI® TOOLS HSS  made threaded shank drill bits feature a 135° split point and a 1/4"-28 threaded shank. They are offered in different drill sizes and lengths in inches. Please consult the supplied documentation.

Made of aluminum for SOUTHCO® DZUS® standard studs, SOUTHCO® DZUS® GA Type full grommets can be used with “A” and “AJ”  protruding head studs and GF Type with “F” and “FJ” flush head studs. 

A full grommet is used when protection of the hole is a definite consideration. They protect panel finish and reduce stud play. 

The dash number represents the length ("L" dimension) of the grommet.

A tool is required for their installation.

For cross reference between DZUS® old part numbers and respective SOUTHCO® part numbers please consult the supplied table.

SOUTHCO® DZUS® retainers and accessories for use with SOUTHCO® DZUS® fasteners. SOUTHCO® DZUS® standard line quarter-turn retaining springs made of steel, zinc plated or stainless steel. The dash number represents the height ("H" dimension) of the spring. For cross reference between DZUS® old part numbers and respective SOUTHCO® part numbers please consult the supplied table.

SOUTHCO® DZUS® AJ Type oval head long undercut studs are made from steel, zinc electroplated or stainless steel, indicated by the letters "SS" after the part number.The dash number represents the length ("L" dimension) of the stud. Cadmium plated fasteners indicated by an asterisk (*) are no longer available due to enviromental reasons. Only offered till suppliers' current stock is depleted. Please order next longer size.

For cross reference between DZUS® old part numbers and respective SOUTHCO® part numbers please consult the supplied table.

SOUTHCO® DZUS® fasteners are versatile space-saving fasteners providing flexibility for accommodating many specific mounting requirements. Their product range includes a wide range of quarter-turn studs in different head styles and lengths, retainers, receptables in different styles, and accessories, designed to secure panels quickly and easily with a simple quarter-turn action. They provide a precise fit for accurate positioning of panels and sheet metal applications where dimensions are constant. 

DZUS® Lion Quarter-Turn Studs form part of the DZUS® Lion family of fasteners, which are known for their quick and easy panel securing and used in Aerospace, Automotive, Computer and many other industries.

DZUS® Lion Quarter-Turn Studs are offered in different sizes, DZUS®  81 (small) DZUS®  82 (medium) & DZUS®  85 (large) series in 0.5 mm (.02") stud length increments. Offered in steel, zinc plated (all series) or stainless steel materials (DZUS® 82 & 85 series only). They are corrosion resistant with available RFI-EMI shielding. Also offered in kits for popular aircraft models. Matching receptables for these studs are separately listed.

DZUS® Lion Quarter-Turn Fasteners' Features:

Integrate three separate component choices – stud, retainer, and receptacle – to suit application requirements. (Choose receptacle first to determine length of stud shaft.)

Built-in retention features keep fastener hardware with panel and frame, eliminate dropped or lost components

A variety of head styles provides choices for convenient manual use or tool-restricted access

Each fastener component provides a degree of spring action for a snug fit

Numerous corrosion-resistant components

Also available in stainless steel

Stainless, nylon, and snap-in stud retainers

Shielded press-in receptacles provide RFI-EMI shielding

Numerous accessories and installation tools enhance the benefits of quick access fastening

Standards and Specifications

Specific hardware components and sizes determine maximum working loads

Applications:

Aerospace, Automotive - Trucks, Computers, Construction Equipment & Off-Highway Vehicles (Farm Equipment), Electronic Enclosures, Exhibits/Signs, Food Equipment, Furniture, HVAC, Industrial Enclosures, Lawn/Garden Equipment, Medical.

For cross reference between DZUS® old part numbers and respective SOUTHCO® part numbers  & additional product information please consult the supplied documentation.

SOUTHCO® DZUS® fasteners are versatile space-saving fasteners providing flexibility for accommodating many specific mounting requirements. Their product range includes a wide range of quarter-turn studs in different head styles and lengths, retainers, receptables in different styles, and accessories, designed to secure panels quickly and easily with a simple quarter-turn action. They provide a precise fit for accurate positioning of panels and sheet metal applications where dimensions are constant. 

DZUS® Lion Quarter-Turn Studs form part of the DZUS® Lion family of fasteners, which are known for their quick and easy panel securing and used in Aerospace, Automotive, Computer and many other industries.

DZUS® Lion Quarter-Turn Studs are offered in different sizes, DZUS®  81 (small) DZUS®  82 (medium) & DZUS®  85 (large) series in 0.5 mm (.02") stud length increments. Offered in steel, zinc plated (all series) or stainless steel materials (DZUS® 82 & 85 series only). They are corrosion resistant with available RFI-EMI shielding. Also offered in kits for popular aircraft models. Matching receptables for these studs are separately listed.

DZUS® Lion Quarter-Turn Fasteners' Features:

Integrate three separate component choices – stud, retainer, and receptacle – to suit application requirements. (Choose receptacle first to determine length of stud shaft.)

Built-in retention features keep fastener hardware with panel and frame, eliminate dropped or lost components

A variety of head styles provides choices for convenient manual use or tool-restricted access

Each fastener component provides a degree of spring action for a snug fit

Numerous corrosion-resistant components

Also available in stainless steel

Stainless, nylon, and snap-in stud retainers

Shielded press-in receptacles provide RFI-EMI shielding

Numerous accessories and installation tools enhance the benefits of quick access fastening

Standards and Specifications

Specific hardware components and sizes determine maximum working loads

Applications:

Aerospace, Automotive - Trucks, Computers, Construction Equipment & Off-Highway Vehicles (Farm Equipment), Electronic Enclosures, Exhibits/Signs, Food Equipment, Furniture, HVAC, Industrial Enclosures, Lawn/Garden Equipment, Medical.

For cross reference between DZUS® old part numbers and respective SOUTHCO® part numbers  & additional product information please consult the supplied documentation.

SOUTHCO® DZUS® fasteners are versatile space-saving fasteners providing flexibility for accommodating many specific mounting requirements. Their product range includes a wide range of quarter-turn studs in different head styles and lengths, retainers, receptables in different styles, and accessories, designed to secure panels quickly and easily with a simple quarter-turn action. They provide a precise fit for accurate positioning of panels and sheet metal applications where dimensions are constant. 

DZUS® Lion Quarter-Turn Studs (separately listed) form part of the DZUS® Lion family of fasteners, which are known for their quick and easy panel securing and used in Aerospace, Automotive, Computer and many other industries.They are offered in different sizes, DZUS®  81 (small) DZUS®  82 (medium) & DZUS®  85 (large) series in 0.5 mm (.02") stud length increments. Available in steel, zinc plated (all series) or stainless steel materials (DZUS® 82 & 85 series only). They are corrosion resistant with available RFI-EMI shielding. Matching receptables for these studs come in different styles including:

Floating for Riveting without Base - space saving stainless steel receptacle offering optimum weight savings by eliminating base.

Floating for Riveting with Base - Compact full-floating dacrotized steel receptacle mounted to inside panel with two 3/32" rivets.

Clip-On Receptacles - Fit material thickness from .020 to .190 by simply slipping over the hole and clipping in place. Easily removed not requiring welding and riveting.

Rubber Vibration Isolation Receptacles- for use when necessary to isolate vibration between panels.

For additional information please refer to the attached documentation.

SOUTHCO® DZUS® D5 PANEL LINE QUARTER-TURN FASTENERS

The SOUTHCO® DZUS® aerospace grade D5 Panel Line Quarter-Turn fasteners provide accurate, secure engagement and vibration resistance for demanding applications across industries.They meet aerospace certification requirements and include stud assemblies and receptables briefly described below that provide enhanced functionality. Offered in different sizes.

D5-PFSC35 DZUS® quarter-turn flare-in stud assemblies, designed for quick-access, eliminate the possibility of dropped or lost hardware components. Manufactured from steel and zinc plated, bright chromate.

D5-PR35 Quarter-Turn Receptables made from aluminum alloy and stainless steel.

D5-PB35 Quarter-Turn Single Hole Wire Form Receptables made from steel and zinc plated, bright chromate.

For cross reference between DZUS® old part numbers and respective SOUTHCO® part numbers please consult the supplied table.

POP® PRG510A/MCS510A series air rivet guns are strong, compact, and trouble-free pneumatic tools ideal for continuous high-production riveting. Αvailable with either a deflector (PRG) or with a Mandrel Collection System (MCS). The PRG-511 A offers an extended nose housing for improved access. Sets aluminum in sizes 3/32″ – 3/16″ in open-end and closed-end POP rivets.

Avdel® is part of STANLEY® Engineered Fastening, offering a wide range of structural and non-structural blind rivets, speed blind rivet fasteners, lockbolts, and tooling systems.

Avdel® blind rivets are made of steel, plastic or other materials with different strengths and material thicknesses.They are ideal for situations where access to the connecting materials is only possible from one side, and used in all manufacturing industries worldwide for almost every assembly task to ensure a secure hold.

Avdel® structural rivets are made for the highest demands due to their high resistance against shear and tensile forces and come in different product lines including Avibulb® XT, Avinox® XT, Hemlok®, Monobolt®, Interlock®, Q-Rivet®, and Klamp-Tite® Structural.

Avdel® non-tructural rivets are used on assemblies without high requirements regarding resistance against shear and tensile force. Like their structural counterparts they come in different models including Avex®, Stavex®, Avinox®, Avibulb®, Bulbex®, T-Lok®, Avdelmate®, and Klamp-Tite® Non-Structural.

Avdel® Avdel Speed Blind Fasteners are designed for fast and reliable fastening of metals, plastics, composites, and passive electronic components in mid- and high-volume application. Available in a broad choice of materials, finishes, lengths, and diameters, they have been originally designed for the aerospace industry, but now on assembly applications for household goods, lighting, electronic sub-assemblies, light metal fabrication and automotive. Speed blind fastener solutions include Briv®, Chobert®, NeoSpeed®, Rivscrew®, Avsert®, Avtronic®, Avlug®, Grovit®, and Double Flush Chobert®.

Avdel® Lockbolts are two-piece fasteners designed for high-strength and secure assemblies.Quick and easy to use, they provide protection against unwanted loosening and are the ideal when a welding or a screw-nut connection is not not possible, practicable, or too time consuming. Frequently used in commercial vehicles, railway, construction, solar field construction and container manufacturing. Avdel® lockbolts offer perfect resistance to vibration and material fatigue due to the swaged lock which forms collar material permanently into the circular grooves of the bolt. Respective product lines include NeoBolt®, Avdelok®, Avdelok® XT, Maxlok®, Avtainer®, and Avbolt®.

Avdel® Blind Rivet Nuts provide a fast, reliable and cost effective system for the introduction of high-quality, load-bearing threads. They offer many advantages against weld nuts, thread forming screws, press nuts and screw / nut combinations. Product range includes Eurosert®, Nutsert®. Hexsert®/Euro Hexsert®, High Strength Hexsert®, Squaresert®, Versa-Nut®, Jack-Nut®, and Well-Nut®.

In addition to fasteners Avdel® offers a range of powerful and lightweight manual hand tools, hand-held hydraulic tools, hydro-pneumatic tools, battery powered hand tools for processing blind rivets, speed rivets, blind rivet nuts and lockbolts.

Different screws used on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

Different bolts used on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

Different pins, rivet pins & collars used on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available are alternative respective parts from other manufacturers. HI-SHEAR HI-LOK™ pins and collars are catalogued as TEXTRON AVIATION part numbers but the alternative HI SHEAR part number is also included in the product reference number (SKU). When fasteners are sold in packs the specified number of pieces per pack is designated after the letters "PK" in the product SKU.

TRIMAS Corporation manufactures a diverse set of products primarily for the consumer products, aerospace and defense, and industrial end markets through TRIMAS Packaging, Aerospace and Specialty Products groups. 

ALLFAST FASTENING SYSTEMS® & MONOGRAM AEROSPACE FASTENERS® are parts of TRIMAS AEROSPACE™. ALLFAST is emerging as a world leader in blind rivet design, manufacture and delivery including Allmax/Supermax line, NAS1919/1921, A Codes, AB Codes and others. 

MONOGRAM serves the world’s markets with industry leading products including specialty fasteners, temporary fasteners for fixturing and alignment, fastener installation tools, finishing and removal tools and the design of innovative fastening solutions for the aerospace industry. Their product portfolio includes Visu-Lok® family of high strength fasteners available to 112 KSI shear, designed for use in metal structures, Composi-Lok® fasteners, industry's standard for blind fastening of composite laminates but equally well-suited to metal structures, Radial-Lok® unique hole-filling, high strength blind fasteners, and OSI-Bolt®, the only blind bolts capable of equivalent usage with solid shank bolts offering a full 1.5D bearing area. Intended as direct replacement for solid shank pin-and-collar systems.

For additional information please refer to the Product Description section and the supplied documentation.

TRONAIR® is a leading GSE manufacturer offering a diverse range of high-quality GSE product lines to support safe and efficient aircraft ground operations. Their product portfolio includes equipment for jacking & access, hydraulic & pressure testing, towing & taxiing, electrical power & air conditioning, and aircraft & engine servicing.

TRONAIR® ATA-29 Hydraulic Power Service Units (HPUs) are multipurpose equipment, used for loading hydraulic oil in the aircraft or engine tanks of commercial, regional, and business airlines or allowing the aircraft actuators to be moved through their equipped high-pressure pumps. Their filter lines ensure that the liquid is not contaminated while their use reduces aircraft filter changes and increases aircraft component life. TRONAIR® ATA 29 HPUs have the best high-grade filtration in the industry. TRONAIR® HPUs are available in different series and various configurations. Despite their differences all HPUs are powered by a motor (the primary source of power), which in turn powers the main pump to circulate hydraulic fluid from the reservoir throughout the entire system. Typically, motors are electrically powered. However, a few are gas and diesel-driven for outdoor usage. Other HPU components include the hydraulic pump which controls both the flow and the pressure within the unit, the reservoir (the storage area for the hydraulic fluid), the regulators which control or "regulate" the pressure lines and the relief and pressure supply lines which keep the pressure inside the hydraulic power unit level.

TRONAIR® Reservoir Service Units, under their Hydraulic Service Units product range, support control of contamination of hydraulic fluids from dirt, air, and water in aircraft hydraulic systems through the servicing process. Re-circulating the fluid, prior to servicing, removes particulate contamination from the servicing line and couplings through their 2 micron filter and air, visible in their transparent return hose. Pressure and vacuum valves in the reservoir fill cap minimize tank breathing and thereby control the entry of water into the fluid. TRONAIR® Reservoir Service Units feature a 2 gallon (7.6 liter) reservoir capacity and a maximum output pressure rating of 75 psi/5.2 bars or 200 psi/13.8 bars depending on the model. Units are shipped fully assembled with the exception of customer supplied quick-disconnect couplings. 

For more information please consult the supplied documentation. 

Note: TRONAIR® ATA-29 Hydraulic Power Service Units (HPUs) are offered with or without CE marking (*). Listed HPUs are non CE rated. For CE rated versions please specify during ordering. 

(*) CE marking indicates that a product has been assessed by the manufacturer and deemed to meet EU safety, health and environmental protection requirements. It is required for products manufactured anywhere in the world that are marketed in the EU.

Nylon Insulated Diamond Grip (PIDG) Knife Disconnect Splices with body plating of copper, tin and wire insulation support. Offered in different models for respective use with wire insulation diameters.Two required per assembly.

U.S. Air Tool Company Inc. (USATCO) is a manufacturer and worldwide distributor of high quality tools for the aerospace/aviation industry. Their offered product range includes installation, assembly, and repair tools and related accessories for air drilling,punch & cutting,  clamp & fastening, cable, wiring & tubing,  lighting & inspection, testing & measuring, riveting, sheet metal forming, sanders & grinders, files,  abrasives & saws, an extensive range of hand, assembly, shop & application tools and more.

For additional information onUSATCO product portfolio please refer to the Product Description section, the supplied documentation or contact us.

MONADNΟCK floating clip nuts  are high strength forged hex nuts suitable for structural and non-structural applications in metal, plastic and composite materials. Made of carbon steel, heat treated, cad plated per QQ-P-416, type II, class 2.

NASM35675/MS35675 series pins are headless pins with longitudinal straight grooves, made from corrosion resisting steel (CRES). MS35675 series pins are superseded by those of NASM35675 series.

Brass nuts for mounting of aircraft instruments from the front of the panel.

This tool is used to compress valve springs during valve removal and installation. It is ergonomically designed for shop and field use and comes with special pivot pin. Features alloy steel construction with black alloy conversion coating.

Helical split lock washer that fits the corresponding bolt/screw size.

US made bolt machined from 2024T3 aluminum, gold anodized per specification MIL-A-8625C, Type II for improved corrosion resistance. Length 5-3/4". Mounting bolt pattern is four equally spaced 1/4" dia. holes on 1-15/16" dia. bolt circle. Thread size: 1-1/4 x 16. 

Stainless steel safety wire furnished in convenient 1 lb. dispensing container. Available in Type 302/304 stainless steel (soft temper) per MS20995.

AN Clevis bolts are manufactured from nickel steel alloy, SAE 2330 and cadmium plated in same manner as AN3 - AN8 aircraft bolts.They are special-purpose bolts with a a slotted brazier type head and used where a large shearing stress occurs (never in tension). Minimum tensile strength 125,000 PSI. They are available with drilled or undrilled shank (designated by the letter "A" after the dash number for undrilled shank). For the AN12-AN23 bolts the second digit denotes the fine thread machine screw size (e.g. for AN21 the size is 6-40, for AN22 8-36 and for AN23 10-32). For the AN24-AN36 bolts the second digit denotes the diameter in 1/16 inch increments (AN25 has a diameter of 5/16 inch).

AN 22 Series Clevis bolts are available in NEW SURPLUS condition. Availability till stock exhaustion. They are special-purpose bolts with a a slotted brazier type head and used where a large shearing stress occurs (never in tension). Available with drilled or undrilled shank (designated by the letter "A" after the dash number for undrilled shank). 

AN 21 Series Clevis bolts are available in NEW SURPLUS condition. Availability till stock exhaustion. They are special-purpose bolts with a a slotted brazier type head and used where a large shearing stress occurs (never in tension). Available with drilled or undrilled shank (designated by the letter "A" after the dash number for undrilled shank). 

AN Clevis bolts are manufactured from nickel steel alloy, SAE 2330 and cadmium plated in same manner as AN3 - AN8 aircraft bolts.They are special-purpose bolts with a a slotted brazier type head and used where a large shearing stress occurs (never in tension). Minimum tensile strength 125,000 PSI. They are available with drilled or undrilled shank (designated by the letter "A" after the dash number for undrilled shank). For the AN12-AN23 bolts the second digit denotes the fine thread machine screw size (e.g. for AN21 the size is 6-40, for AN22 8-36 and for AN23 10-32). For the AN24-AN36 bolts the second digit denotes the diameter in 1/16 inch increments (AN25 has a diameter of 5/16 inch).

AN Clevis bolts are manufactured from nickel steel alloy, SAE 2330 and cadmium plated in same manner as AN3 - AN8 aircraft bolts.They are special-purpose bolts with a a slotted brazier type head and used where a large shearing stress occurs (never in tension). Minimum tensile strength 125,000 PSI. They are available with drilled or undrilled shank (designated by the letter "A" after the dash number for undrilled shank). For the AN12-AN23 bolts the second digit denotes the fine thread machine screw size (e.g. for AN21 the size is 6-40, for AN22 8-36 and for AN23 10-32). For the AN24-AN36 bolts the second digit denotes the diameter in 1/16 inch increments (AN25 has a diameter of 5/16 inch).

A retaining ring is a fastener that holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Once installed, the exposed portion acts as a shoulder which retains the specific component or assembly. MS16624 series are external retaining rings intended for use in different shaft sizes. They are offered in different materials (Carbon Spring Steel, Corrosion Resistant Steel, Beryllium Copper) and surface finishes (Cadmium Plated, Phosphate Coat, Zinc Coat) depending on their part number and are axially assembled.

A retaining ring is a fastener that holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. MS16625 series are internal retaining rings intended for use in different housing diameters. They are offered in different materials (Carbon Spring Steel, Corrosion Resistant Steel, Beryllium Copper) and surface finishes (Cadmium Plated, Phosphate Coat, Zinc Coat) depending on their part number.

A retaining ring is a fastener that holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Once installed, the exposed portion acts as a shoulder which retains the specific component or assembly. MS16633 series are E style external retaining rings. They are offered in different materials (Carbon Spring Steel, Corrosion Resistant Steel, Beryllium Copper) and surface finishes (Cadmium Plated, Phosphate Coat, Zinc Coat) depending on their part number.

Ratchets, also known as ratcheting socket wrenches, have a handle and a drive end that connects to a socket that tightens or looses fasteners such as nuts and bolts. Ratchets come in different types such as Standard-Head, Flex-Head, Offset-Head  or Flex-Head to meet respective application requirements, in different drive sizes (1/4", 3/8", 1/2",1" etc.) with Quick Release versions.

PERFORMANCE TOOL™ Ratchets & Adapters by WILMAR LLC. are versatile hand tools used in a great number of applications. PERFORMANCE TOOL™ ratchets are offered in different Teardrop and Flex Head models for standard and heavy duty uses but also with extended length for extra leverage. PERFORMANCE TOOL™ Racheting Adaptors are offered for 3/8" and 1/2" drive sizes. 

Please refer to the Product Description and the supplied documentation for additional information or contact us.

HSTOOLING (formerly HI-SHEAR TOOLING) is a brand of ZEPHYR Manufacturing Co., Inc. (aka Zephyr Tool Group) designing and manufacturing the highest quality aerospace and industrial assembly tools and tooling systems.

HSTOOLING product porfolio includes installation, assembly and repair tools for Aerospace (air drills, riveters, both conventional rivet hammers and compression riveters, specialty fastener installation and other tools and accessories).

HSTOOLING ULTRALITE® compression riveters include different models covering different capacity requirements for aluminum and steel.They are  offered in Alligator jaw and C-Yoke models and feature ergonomic design, weight reduction vs. comparable-force models, high-strength forged jaws and C-yokes, precison bearings and shafts.  The new 702 and 702T alligator models posess outstanding force-to-size ratios. 

HSTOOLING Air Driver Assemblies are designed specifically for installing HI-SHEAR CORPORATION HI-LOK™ (*), HI-LITE™,  and HI-LOK™/HI-TIGUE™ pin and collar fastener combinations. They come in a variety of sizes and configurations, to drive fasteners in both open and restricted-access areas. Compact, lightweight, fast and reliable HSTOOLING tooling systems generate low noise compared with conventional riveting, require minimum employee training, and are designed to operate at a normal factory air pressure of 90 psi with 1/4 or 3/8 inch air lines.

Installation/removal tools for Hi-Lok™ or Hi-Lok™ style fasteners made by Jiffy Air Tool and USATCO are also offered. Pleae refer to the respective product presentations.

For additional information please refer to the supplied documentation or contact us.

(*) The HI-LOK™ fasteners from HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, are the second most used fasteners in aircraft structural assembly after the solid rivets MS20470 and MS20426. The HI-LOK™ fastener system includes a rivet pin (similar to a screw but with additional advantages) and a collar (similar to a nut).

ZEPHYR TOOL GROUP (aka ZEPHYR Manufacturing Co.) is a manufacturer of highest quality assembly tools and tooling systems for the aerospace, automotive, and manufacturing industries. ZEPHYR TOOL GROUP product ranges include assembly tools, maintenance tools, fastener installation and removal tools for the aerospace market, power tool accessories for use in the general industrial tool industry, and commercial products. Brands within their family of tools and products include ZEPHYR Aerospace, ZEPHYR Industrial, KWIK-LOK, LOK-FAST, U.S. INDUSTRIAL TOOL (USIT), HSTOOLING  and MARTIN Aircraft Tools.

U.S. INDUSTRIAL TOOL (USIT) 114 series C-Type compression riveters can be used for assembly operations in aircraft, automotive, truck, bus components, boats, metal furniture, toys, electronic chassis & appliance assembly. One man operated, USIT rivet squeezers increase productivity securing high joint integrity with no dependance on operator's skill level. Available in standard and high output configurations. CE certified. They feature tandem cylinder doubling compression force available from tool, rolling cam and wedge assembly multiplying compression force of piston, "squeeze" action with throttle controllable speed allowing easy control, exceptional accuracy and uniformity & swivel air inlet aiding maneuverability. They develop full squeezing force at 90 P.S.I.