CHERRY® AEROSPACE MAXIBOLT® Blind Bolts (also termed as rivets) are multi-piece assemblies, capable of being installed from one side of the workpiece. Typically used in higher strength aircraft structural areas they are offered as Maxibolt®,  Maxibolt® Plus and Titanium Maxibolt® Blind Bolts. They can be installed with the use of CHERRY® tools for a most reliable installation performance.

CHERRY® Maxibolt® Blind Bolts are supplied in alloy steel and A-286 CRES materials. They conform to MS90353/MS90354, and MS21140/MS21141 Standards, meet MIL-F-81177 and MIL-F-8975 requirements, and are listed in QPL81177 and QPL8975. Shear strength for the steel version is 112 KSI and  95 KSI for the A286 CRES version.  CHERRY® Maxibolt® Plus Blind Bolts are available in -5, -6, and -8 diameters and stainless steel, and titanium materials. One tool and pulling head installs all three diameters. Creating a larger blind side footprint, they provide excellent performance in thin sheet and non-metallic applications. The flush breaking stem eliminates shaving while the extended grip range accommodates different application thicknesses. CHERRY® Titanium Maxibolt® Blind Bolts feature expanded performance capabilities for metallic and composite blind fastening applications. They provide a flush, burr- free installation with no shaving required. The Titanium Maxibolt® bolts offer fast and consistent installation by utilizing single action tooling with a unique shift washer design. The all-titanium sleeve and stem are compatible with exotic composite materials. They cause no delamination of the exit side of the structure during installation, and offer a blind-side slope tolerance up to 7°.

For more information please refer to the supplied documentation or contact us.

Blind Rivets are multi-piece rivet assemblies, capable of being installed from one side of the workpiece.Traditionally, blind rivets were used on aircraft leading edges, trailing edges, and close out areas which are limited to access to one side of the structure.  Current blind rivet usage has expanded to many additional areas of the aircraft in an effort to decrease labor expense and to address the ergonomic issues of solid riveting.

The CherryLOCK® blind rivets by CHERRY® AEROSPACE come in below  mentioned types, and in different sizes, materials and strength levels. A complete range of recommended power tools, hand tools and pulling heads are also available.

CherryLOCK® ‘A’ Code “non-shift”, self-plugging blind rivets 

Single action, mechanically locked, wire-drawing fasteners providing excellent hole-fill and sheet take-up capability. They conform to the Procurement Specification NAS 1400 and Standards Pages NAS 1398 and NAS 1399.These rivets are offered in aluminum, monel and A-286 stainless steel materials in a wide variety of diameters and grip ranges. CherryLOCK® ‘A’ Code  "Wiredraw"  rivets are locked spindle flush fracturing structural rivets manufactured in 3/32", 1/8", 5/32", 3/16" and 1/4" diameters in 100° flush head and protruding head style configurations and offer grip ranges from .020 in the smaller diameters to 1.073 in the larger diameters. The 3/32" diameter rivet is available in A-286 only with grips ranging from .020 to .562. Rivets 1/8" diameter and larger have head markings to identify grip, material and manufacturer for ready inspection. The flush fracturing spindle eliminates the need for shaving and meets the flushness requirement of the NAS 1400 specification. These rivets are especially suited for sealing applications and joints requiring excellent sheet take-up and allow simple installation with a wide variety of Cherry® nonshifting and shifting tools. 

Both CherryLOCK® ‘A’ & Wiredraw Rivets rivets are designed to provide strong, reliable fastening solutions, but the choice between them may depend on specific application requirements, such as material compatibility, strength needs, and installation conditions. Both offer a wide grip range, making them versatile for different thicknesses.

Bulbed CherryLOCK® locked spindle and flush fracturing structural rivets

They consist a complete shear fastening system.  Their features can be utilized for optimum strength and performance in both thick and thin sheets. They provide the highest possible design integrity, particularly in double dimple or thin backside sheet applications. CherryLOCK® hydroshift installation tool systems are required for installation. They conform to Procurement Specification NAS1740 and Standards Pages NAS1738 and NAS1739.

For additional information on CherryLOCK® rivets and other blind rivets manufactured by CHERRY® AEROSPACE (separately listed) please refer to the supplied documentation and the Product Description section. 

HI-SHEAR Fasteners are patented fasteners of HI-SHEAR CORPORATION (Patent Holder), subsidiary of LISI AEROSPACE, a manufacturer of advanced aerospace fasteners and installation equipment used in space, military and commercial vehicles. Depending on the fastener, they are made by quality fastener manufacturers (licensees) in different  countries including but not limited to LISI AEROSPACE companies, HOWMET ALCOA / SIMMONDS / FAIRCHILD, PCC  SPS, and others. 

HI-SHEAR nuts and collars are designed to fit with their related HI-LOK™/HI-TIGUE™ and HI-LITE™ pins  (separately presented) forming the respective fastener system. HI-LOK™ nuts and collars are designed to fit HI-LOK™ & HI-TIGUE™ pins. HI-LITE™ nuts and collars are designed to fit HI-LITE™, PULL-IN™, PULL-STEM™ & TAPER HI-LITE™ pins.

With a wide range of shapes, materials and coatings, they are suited for most of structural assemblies and are commonly used in the aerospace industry in tension and shear applications. Collars’ wrenching element is designed to break-away at a controlled preload. It has been tested over time and has proven its reliability when installed with non-torque-controlled tools. Main features of nuts and collars include:

- controlled preload

- wide variety of materials and coatings for installation in all structures

- suitable for shear or tension applications, with captive washer, self-aligning or self-sealing options

- limited access installation, using conventional tooling

- designed with a counterbore to fit nominal and oversized pins

- nuts allow customized torque and preload & low height design for low access areas

Please refer to the supplied documentation for additional information.

Economy models of gauges for shop rivet heads and rivet lengths are available from ATS.

ATS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Works for measuring both universal head and flush rivets. Color coded anodized finish.

ATS rivet length gauge measures -3, -4, -5 & -6 rivets. Used to check length of rivets BEFORE setting. Works with universal and flush head rivets.

The set of rivet head gauges and the length gauge can be ordered as kit or separately.

Avdel® is part of STANLEY® Engineered Fastening, offering a wide range of structural and non-structural blind rivets, speed blind rivet fasteners, lockbolts, and tooling systems.

Avdel® blind rivets are made of steel, plastic or other materials with different strengths and material thicknesses.They are ideal for situations where access to the connecting materials is only possible from one side, and used in all manufacturing industries worldwide for almost every assembly task to ensure a secure hold.

Avdel® structural rivets are made for the highest demands due to their high resistance against shear and tensile forces and come in different product lines including Avibulb® XT, Avinox® XT, Hemlok®, Monobolt®, Interlock®, Q-Rivet®, and Klamp-Tite® Structural.

Avdel® non-tructural rivets are used on assemblies without high requirements regarding resistance against shear and tensile force. Like their structural counterparts they come in different models including Avex®, Stavex®, Avinox®, Avibulb®, Bulbex®, T-Lok®, Avdelmate®, and Klamp-Tite® Non-Structural.

 Avdel® Avdel Speed Blind Fasteners are designed for fast and reliable fastening of metals, plastics, composites, and passive electronic components in mid- and high-volume application. Available in a broad choice of materials, finishes, lengths, and diameters, they have been originally designed for the aerospace industry, but now on assembly applications for household goods, lighting, electronic sub-assemblies, light metal fabrication and automotive. Speed blind fastener solutions include Briv®, Chobert®, NeoSpeed®, Rivscrew®, Avsert®, Avtronic®, Avlug®, Grovit®, and Double Flush Chobert®.

Avdel® Lockbolts are two-piece fasteners designed for high-strength and secure assemblies.Quick and easy to use, they provide protection against unwanted loosening and are the ideal when a welding or a screw-nut connection is not not possible, practicable, or too time consuming. Frequently used in commercial vehicles, railway, construction, solar field construction and container manufacturing. Avdel® lockbolts offer perfect resistance to vibration and material fatigue due to the swaged lock which forms collar material permanently into the circular grooves of the bolt. Respective product lines include NeoBolt®, Avdelok®, Avdelok® XT, Maxlok®, Avtainer®, and Avbolt®.

Avdel® Blind Rivet Nuts provide a fast, reliable and cost effective system for the introduction of high-quality, load-bearing threads. They offer many advantages against weld nuts, thread forming screws, press nuts and screw / nut combinations. Product range includes Eurosert®, Nutsert®. Hexsert®/Euro Hexsert®, High Strength Hexsert®, Squaresert®, Versa-Nut®, Jack-Nut®, and Well-Nut®.

In addition to fasteners Avdel® offers a range of powerful and lightweight manual hand tools, hand-held hydraulic tools, hydro-pneumatic tools, battery powered hand tools for processing blind rivets, speed rivets, blind rivet nuts and lockbolts.

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU compression riveters include different models covering different capacity requirements for aluminum and steel. They come in different dimensions and are  offered with matching yokes to cover various application needs. Please refer to the specifications of individual compression riveters.

GOEBEL® is leading manufacturer of high quality fasteners with product lines extending from blind Rivets, self-tapping/drilling screws, and sealing washers, to drill bits, nut drivers, toggle latches, hand & power tools, PPE equipment, and many more innovative specialty products. GOEBEL® blind rivets, much like other GOEBEL® fastening products, are widely recognized used by leading companies in nearly every industry including oil & gas, automotive, HVAC, railroad, aerospace, telecommunications, and construction.

Blind rivets are offered in different product families in different materials, finishes head styles and sizes to meet intended application requirements. They include Standard, Multi-Grip, Semi Structural & Structural, Tri-Folding & Load Spreading as well as Specialty blind rivets. More information on GOEBEL® Structural Blind Rivets is included in the Product Description. Additional information on GOEBEL® Blind Rivers is also available in the documentation in the Attachment section.

ATI® TOOLS 105A series AN470/MS20470 universal-head cup shaped double offset drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: AN470/MS20470 universal-head. Shank diameter 0.401".  Available in different rivet sizes, body diameters and lengths in inches.

HI-SHEAR Fasteners are patented fasteners of HI-SHEAR CORPORATION (Patent Holder), subsidiary of LISI AEROSPACE, a manufacturer of advanced aerospace fasteners and installation equipment used in space, military and commercial vehicles. Depending on the fastener, they are made by quality fastener manufacturers (licensees) in different  countries including but not limited to LISI AEROSPACE companies, HOWMET ALCOA / SIMMONDS / FAIRCHILD, PCC  SPS, and others. 

The HI-SHEAR rivet pin range offers a versatile solution for most of structural assemblies. They consist a very common type of threaded fastener used for clearance, transition and low interference fit throughout the airframe (metallic and composite), from wings to fuselage, in engine fairings, and more. Easily installed from one side, by one person with conventional tooling.

HI-SHEAR rivet pin product portfolio includes the original HI-LOK™ (HL™) system, the latest HI-LITE™ (HST™) pins with an improved recess and HI-TIGUE™ (HLT™) pins with improved fatigue benefits. They can be used in shear and/or tension applications on plain or sloped surfaces and feature controlled preload, a wide range of sizes and variety of materials and coatings for installation in all structures.

Most fasteners are mainly loaded in shear. That should be the only way for rivets as their tension capability is relatively low. Whenever there is a substantial tension load in a fastener, a threaded bolt should be used.

Additional information is available in Product Description section and the supplied documentation.

Countersinking is used to ensure that flat head screws or fasteners sit flush against the workpiece. JITTERBUG Pilot Countersink Cutters can be used with flush rivets in different countersinking applications. They consist cost effective alternatives to other brands. They are available separately or in convenient sets of different pilot diameters. Offered sets include 6 pieces (1/4 5/16 3/16 5/32 3/32 1/8 in.) or 4 pieces (3/16 5/32 3/32 1/8 in.) per set. For additional information please consult the supplied documentation or contact us.

ATI® TOOLS 110C series flush straight drive rivets with rubber guard are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

For over 60 years, CHERRY® AEROSPACE Installation Tools have been specified and used by aircraft manufacturers and repair facilities throughout the world. Each CHERRY® AEROSPACE fastening system is combined with a full range of tools to provide an overall systems approach that ensures optimum compatibility and consistent installation performance. Used worldwide, Their tools are are manufactured to provide maximum service with minimum care. They are offered in a wide variety of hand, pneumatic and pneumatic/hydraulic versions, with optional accessories to permit their use in difficult and limited access areas. The size and type of fastener being installed dictates the type of tool to be used. All installation tools are manufactured at CHERRY® AEROSPACE's plant in Santa Ana, CA, USA.and they are CE Certified.

For additional information please refer to the supplied documentation or contact us.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. Rivets have a two-piece construction, the rivet body, shell, or hat and the stem or mandrel. Both the hat and mandrel are pre-assembled and ready to use. Rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Upon reaching the designed clamping force, the mandrel snaps and is discarded. They come in different materials, sizes, military or industrial standards, can be installed with the use of a riveting tool and cover a wide range of structural and non structural applications. A benefit of blind rivets is that they are not material specific and therefore they can be used to combine two different material types together. Furthermore, there is no way to over or under-torque a rivet. If the appropriate diameter and grip range are chosen correctly, the rivet will be installed perfectly every time.

Non structural break mandrel blind rivets are offered as part of AVIATIONEU NEW ERA product lines. They are produced in accordance with the DIN 7337 Standard of the German Institute for Standardisation (Deutsches Institut für Normung, DIN) or respective replacing ISO Standards (ISO 15983 or ISO 15977 for protruding or flat/countersunk head rivets respectively). These standards specify the dimensions, materials, properties and requirements for the use of blind rivets and they are widely used many industries in Europe and worlwide, including automotive, construction and machine building industries.

AVIATIONEU NEW ERA DIN 7337 blind rivets are offered in metric (mm) sizes covering different diameters, lengths and grip ranges. Common diameters include:  2.4 mm, 3.2 mm (1/8″),  4.0 mm, 4.8 mm (3/16″), and 6.4 mm (1/4″).

Material options include steel, stainless steel and aluminum alloys and can be supplied with different finishes, galvanized or coated.

Sold in pieces but mostly in packs with the number of rivets per pack indicated in the product SKU after the letters "PK". Appearing sale prices are per unit of sale used each time.

Intended for use in a wide range of non structural applications in aircrafts, ships, submersibles, RVs, trailers,  machinery, small electronics, and others. 

Please refer to the supplied documentation or contact us.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. They are two-piece fasteners consisting of the rivet body (aka shell, or hat) and the stem or mandrel.They are not material specific and therefore they can be used to join two different material types together.They come in different materials, sizes, military or industrial standards, can be installed with the use of a riveting tool and cover a wide range of structural and non structural applications.

Non structural blind rivets are those designed for applications where the connection doesn't need to withstand significant load-bearing forces. They are offered by different  manufacturers under their respective brands, such as STANLEY® Engineered Fastening AVDEL® & POP®, and others but also as part of our own labelled (AVIATIONEU NEW ERA) product lines, sourced by quality suppliers and intended as cost-effective alternatives to OEM parts. Depending on the rivet, they are made of different materials such as steel, stainless steel,  alluminum alloys, or combinations, they can be supplied in different head styles, and inch or Metric (M) dimensions conforming to national and international standards such as DIN or ISO respectively (*). Sold in pieces but mostly in packs with the number of rivets per pack indicated in the product SKU after the letters "PK". Appearing sale prices are per unit of sale used each time. Depending on the selected rivet & prevailing stock conditions alternate part numbers of the same rivet may be supplied in lieu of the ordered, meeting or exceeding Standard specifications. For additional information on different products please refer to the Product Description section, the supplied documentation or contact us.

(*) Non structural blind rivets produced in accordance with the German DIN 7337 Standard or respective replacing ISO Standards (ISO 15983 for Protruding Head, and ISO 15977 for Flat/Countersunk Head blind rivets) are offered as part of AVIATIONEU NEW ERA product lines and separately listed.

Blind Rivets are multi-piece rivet assemblies, capable of being installed from one side of the workpiece.Traditionally, blind rivets were used on aircraft leading edges, trailing edges, and close out areas which are limited to access to one side of the structure.  Current blind rivet usage has expanded to many additional areas of the aircraft in an effort to decrease labor expense and to address the ergonomic issues of solid riveting.

The CherryMAX® locked spindle blind rivets by CHERRY® AEROSPACE are the most reliable, high strength structural fasteners with visual inspectability in the world today. They are also known as "bulbed" fasteners due to their large blind side bearing surface, developed during the installation process. They feature a a visibly inspectable  "Safe-lock" locking collar for more reliable joint integrity, and their own installation washers, which eliminate the problems resulting from worn tool anvils. CherryMAX® rivets are used in thin sheet applications and in materials that may be damaged by other types of blind rivets. They meet the requirements of PS-CMR-3000 and can be supplied in 1/8" through 1/4" diameters in both nominal (CR3212 and CR3213 Series) and 1/64" oversize diameters (CR3242 and CR3243 Series). 

Please refer to the supplied documentation and the Product Description section for detailed information on CherryMAX® rivet and other blind rivets manufactured by CHERRY® AEROSPACE. 

Rivet cutters of different types are commonly used in Aerospace and many industrial applications. These quality heavy duty tools are made by different manufacturers mostly in hand-held but also in bench mounted versions and can be used for cutting rivets of aluminum and other materials od different diameters and lengths. Some of them are briefly presented below.

ATI® TOOLS 501 series aerospace heavy duty rivet cutters are designed to quickly and easily shear aluminum rivets. They are adjustable for 1/4˝ to 3/4˝ long rivets in 1/16˝ increments. Available in two models with standard handle (ATI 501R) and long handle (ATI 501S).

The RC-1 heavy-duty rivet cutter manufactured by LANCASTER PUMP is designed to mount onto a workbench (or held in vice), and will cut five (5) different diameter rivets, wire, and screws to any of seven (7) different lengths. It is made of hardened steel and the cutting surfaces are ground to exacting tolerances for consistently clean, distortion-free cuts. Accepts diameters: 1/16", 3/32", 1/8", 5/32", and 3/16". Cuts lengths: 5/32", 7/32", 9/32", 11/32", 13/32", 15/32", and 17/32". Shipping weight 3 lbs ( appr. 1.5kg).

For more information on these tools please consult the supplied documentation or contact us.

AVERY TOOLS (*) manufactures and supplies gauges for shop rivet heads and rivet lengths.

AVERY TOOLS rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivets. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting. Eliminates guessing if your rivets are properly set. Works for measuring both universal head and flush rivets. Precision machined to size from 2024 aluminum. Rivet size permanently stamped on each gauge. Color coded anodized finish.

A rivet length gauge is also available to check for proper length of rivets BEFORE setting and can be ordered separately or as kit with the head gauges. 

(*) AVERY TOOLS aviation tools and products are now available only through retail suppliers.

CHERRY® AEROSPACE MBC® Blind Fastening System  is one of the industry’s simplest and most versatile riveting systems available today. These fasteners are offered as standard MBC® rivets, simple, two-piece assemblies comprised of a MBC® rivet sleeve and a stem with an integral locking feature and as MBC® Lock Creator rivets (MBC®-L/C), same as the standard MBC® rivets with the addition of a lock creator anvil. This additional component simplifies installation of the fastener by allowing a single nose tip for installing the three available diameters, as in the CherryMAX® type rivets. Whether standard MBC® or MBC®-L/C rivets are used, each rivet comes complete as a single-piece assembly, ready for installation. CHERRY® AEROSPACE MBC® Blind Rivets are offered in aluminum and stainless steel versions and in different finishes. Both the aluminum and stainless steel series MBC® rivets are available in 1/8" (3.2mm), 5/32" (4.0mm) and 3/16" (4.8mm) diameters, with flush, reduced flush or protruding rivet head styles. Respective information is designated in their part numbers by respective codes as follows:

CHERRY® MBC® Blind Rivet PN Structure NAS17 (NAS Number) (Head Style) (Material Code) (Rivet Diameter) L (Grip Size) (Finish Code)

NAS Number  (19, 20 or 21)

Head Style

Material Codes: C - CRES Stainless Steel, H - 2014A Aluminum

Rivet Diameters: -4 (.125), -5 (.156) -6 (.188)

L indicates Lock Creator, Dash (-)indicates Standard

Grip Sizes: NAS Grip sizes are correlated with respective CHERRY® AEROSPACE Grip Numbers (please consult the supplied documentation).

Finish Codes: A Clear Anodize per SAE AMS-A-8625, F Chemical Film per SAE AMS-C-5541, Passivation per AMS 2700, W Cadmium Plate AMS QQ-P-416, N Natural Finish

Sold in pieces but mostly in packs where the specified number of rivets per pack is indicated after the letters "PK" in the product reference number (SKU). Appearing prices are always for the units of measurement used each time.

AIRPRO INDUSTRY CORP. manufactures professional quality air tools, hand  & auto repair tools and accessories for professional applications under  the brand name AIRPROWU. AIRPROWU extensive product line ranges from aircraft tools to industrial, automotive/motorcycle ,tooling/molding, construction and auto body shop solutions and solutions for electronic assembly lines. AIRPROWU product line of Hydraulic Riveters include pneumatic, industrial hydraulic, air hydraulic riveter tools and others. Please refer to the specifications of individual riveters.

AICRAFT TOOL SUPPLY (ATS) is a manufacturer of tools and hardware for the aviation industry. ATS offers an extensive range of aircraft countersink cutters and piloted aircraft stop countersink cutters (aka Micro-Stop cutters or Microstop Countersinks) used to make precision countersinks to accept flush-head fasteners.

Our offered ATS countersinks include:

HSS 1/4-28 male threaded 3 cutting flute pilot cutters,

HSS 1/4-28 male threaded, 1/2” diameter zero flute pilot cutters,

HSS 1/4-28 male threaded removable pilot cutters with solid carbide tip (require 1500P pilot),

Hollow cutters designed to cut away swagged or threaded collars from fasteners,

Respective offered ATS Microstops include:

133-HD heavy duty Microstop Countersink with ball bearings for ultra smooth operation. The ball bearing design also makes it run much cooler than a standard microstop,

133-Mini Microstop Countersink for use  in tight areas that can’t be reached by a standard cage. 

133-Slim Microstop Countersink packing all the features of a standard microstop in a slim design of only 11/16” in diameter. 

 Complete kit is a great package deal featuring our 133

133 Microstop Countersink Kit which includes the Microstop and 4 pilot cutters (1000-100 series) in sizes #40, #30, #21, and #12. The kit is also offered with the countersink only.

For additional information please consult the supplied documentation or contact us.