Jo-Bolt is a trade name for an internally threaded three-piece rivet. A Jo-Bolt consists of three factory preassembled parts, a threaded steel alloy bolt, a threaded steel nut, and an expandable stainless steel sleeve. During installation the bolt is turned while the nut is held. This causes the sleeve to expand over the end of the nut, forming the blind head and clamping against the work. When driving is complete, a portion of the bolt breaks off. The high shear and tensile strength of the Jo-Bolt  fasteners makes them suitable for use in high-stress applications where some of the other blind fasteners would not be practical. Other advantages include their excellent resistance to vibration, weight saving, and fast installation by one person. Jo-Bolts are often encountered in the permanent structure of late model aircraft, in areas which are not often subjected to replacement or servicing. Manufactured to different aerospace standards such as NAS 1669, 1670, 1750, or 1751 they are offered as OEM parts of their respective producers or as respective Standard part numbers under our own labelled (AVIATIONEU NEW ERA) product lines.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. They are two-piece fasteners consisting of the rivet body (aka shell, or hat) and the stem or mandrel, pre-assembled and ready to use. They are not material specific and therefore they can be used to join two different material types together.

Rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Upon reaching the designed clamping force, the mandrel snaps and is discarded. 

They come in different materials, sizes, military or industrial standards, and cover a wide range of structural and non structural applications.

Non structural blind rivets are those designed for applications where the connection doesn't need to withstand significant load-bearing forces. They are offered by different  manufacturers under their respective brands, such as STANLEY® Engineered Fastening AVDEL® & POP®, and others but also as part of our own labelled (AVIATIONEU NEW ERA) product lines, sourced by quality suppliers and intended as cost-effective alternatives to OEM parts. Depending on the rivet, they are made of different materials such as steel, stainless steel,  alluminum alloys, or combinations, and supplied in different head styles, in Inch or Metric (M) diameters, lengths and grip ranges.

Blind rivets conform to national and international military, aerospace and industrial standards such as MS, AIA/NAS, DIN, ISO and others.

Non structural blind rivets produced in accordance with the German DIN 7337 Standard or respective replacing ISO Standards (ISO 15983 for Protruding Head, and ISO 15977 for Flat/Countersunk Head blind rivets) are offered as part of AVIATIONEU NEW ERA product lines.

Sold in pieces but mostly in packs with the number of rivets per pack indicated in the product SKU after the letters "PK". Appearing sale prices are per unit of sale used each time. Depending on the selected rivet & prevailing stock conditions alternate part numbers of the same rivet may be supplied in lieu of the ordered, meeting or exceeding Standard specifications. For additional information on different products please refer to the Product Description section, the supplied documentation or contact us.

ATS Pro-X rivet guns offer unmatched controllability when setting rivets of any type or size. They are used in aircraft manufacturing plants such as Boeing and Lockheed-Martin. With the improved variable power control, proper riveting can be accomplished with confidence.  Different models serve specification requirements (see attached table). 1/8" Aluminum (3/32" Steel) Rivet Capacity. These guns accept all .401 shank rivet sets and attachments. Non-slip Powder Coat Finish. 1/4" NPT Inlet. Lifetime ATS-Pro Warranty.

HI-SHEAR Fasteners are patented fasteners of HI-SHEAR CORPORATION (Patent Holder), subsidiary of LISI AEROSPACE, a manufacturer of advanced aerospace fasteners and installation equipment used in space, military and commercial vehicles. Depending on the fastener, they are made by quality fastener manufacturers (licensees) in different  countries including but not limited to LISI AEROSPACE companies, HOWMET ALCOA / SIMMONDS / FAIRCHILD, PCC  SPS, and others. 

HI-SHEAR nuts and collars are designed to fit with their related HI-LOK™/HI-TIGUE™ and HI-LITE™ pins  (separately presented) forming the respective fastener system. HI-LOK™ nuts and collars are designed to fit HI-LOK™ & HI-TIGUE™ pins. HI-LITE™ nuts and collars are designed to fit HI-LITE™, PULL-IN™, PULL-STEM™ & TAPER HI-LITE™ pins.

With a wide range of shapes, materials and coatings, they are suited for most of structural assemblies and are commonly used in the aerospace industry in tension and shear applications. Collars’ wrenching element is designed to break-away at a controlled preload. It has been tested over time and has proven its reliability when installed with non-torque-controlled tools. Main features of nuts and collars include:

- controlled preload

- wide variety of materials and coatings for installation in all structures

- suitable for shear or tension applications, with captive washer, self-aligning or self-sealing options

- limited access installation, using conventional tooling

- designed with a counterbore to fit nominal and oversized pins

- nuts allow customized torque and preload & low height design for low access areas

Please refer to the supplied documentation for additional information.

ATI® TOOLS 105A series AN470/MS20470 universal-head cup shaped double offset drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Rivet Type: AN470/MS20470 universal-head. Shank diameter 0.401".  Available in different rivet sizes, body diameters and lengths in inches.

ATI® TOOLS ATIST1111BK3 anti-slip rivet set, H13 magnetic particle tested. Manufactured to Boeing® specifications. It features polyurethane rim to prevent slipping and damage to skin surfaces. Shank diameter 0.401". Length 2-1/2″. Face diameter 1-1/4″.

HI-SHEAR Fasteners are patented fasteners of HI-SHEAR CORPORATION (Patent Holder), subsidiary of LISI AEROSPACE, a manufacturer of advanced aerospace fasteners and installation equipment used in space, military and commercial vehicles. Depending on the fastener, they are made by quality fastener manufacturers (licensees) in different  countries including but not limited to LISI AEROSPACE companies, HOWMET ALCOA / SIMMONDS / FAIRCHILD, PCC  SPS, and others. 

The HI-SHEAR rivet pin range offers a versatile solution for most of structural assemblies. They consist a very common type of threaded fastener used for clearance, transition and low interference fit throughout the airframe (metallic and composite), from wings to fuselage, in engine fairings, and more. Easily installed from one side, by one person with conventional tooling.

HI-SHEAR rivet pin product portfolio includes the original HI-LOK™ (HL™) system, the latest HI-LITE™ (HST™) pins with an improved recess and HI-TIGUE™ (HLT™) pins with improved fatigue benefits. They can be used in shear and/or tension applications on plain or sloped surfaces and feature controlled preload, a wide range of sizes and variety of materials and coatings for installation in all structures.

Most fasteners are mainly loaded in shear. That should be the only way for rivets as their tension capability is relatively low. Whenever there is a substantial tension load in a fastener, a threaded bolt should be used.

Additional information is available in Product Description section and the supplied documentation.

Blind rivets (also commonly referred to as POP Rivets) are mainly used in applications where there is no access to the rear (blind side) of the joint. They are produced in accordance with different standards specifying their properties, sizes/dimensions, materials, finishes, installation methods & other information for their application. A benefit of blind rivets is that they are not material specific and therefore they can be used to combine two different material types together. 

This listing relates to those manufactured in accordance with National Aerospace Standard NAS 1919, a U.S. industry standard for the aerospace industry created and maintained by the Aerospace Industries Association (AIA).

AIA NAS 1919 & 1921 series rivets are general-purpose, mechanically-locked blind rivets used in structural aerospace and industrial applications for creating permanent and strong joints. As structural rivets(*) they are high-strength fasteners intended for use on load-bearing applications, offering greater shear and pull-out strength, and vibration resistance. They feature a self-plugging, serrated stem and can be supplied with a protruding head  (NAS 1919 Series) or 100°  flush head (NAS 1921) style. Produced by different manufacturers (such as PCC CHERRY AEROSPACE, HOWMET AEROSPACE HUCK or TRIMAS AEROSPACE ALLFAST) they are offered in different materials (aluminum, corrosion resisting A286 stainless steel or Monel®) and finishes, different nominal shank diameter sizes & corresponding grip ranges in inches. 

Both NAS 1919 & 1921 series rivets are sold under OEM brands and part numbers or as  Standard part numbers under our own branded (AVIATIONEU NEW ERA) product lines, in pieces or packs where the specified number of fasteners per pack is indicated after the letters "PK" in the product reference number (SKU). Depending on the selected size & stock conditions alternate part numbers of the same fastener may be supplied in lieu of the ordered, meeting or exceeding Standard specifications. 

For more information please refer to the attached documentation or contact us.

(*) Other structural and non-structural blind rivets are also offered for a wide range of applications. Please refer to their separate listings.

JIFFY® AIR TOOL is a market leading solutions provider specializing in professional grade hand held, limited access, pneumatic drilling and fastener installation tools for the aerospace and aircraft industries. Manufactured in the USA, their product portfolio includes an extensive line of specialty hand-held pneumatic tools designed and built for easy, trouble-free operation and reach into difficult areas. Their tools are widely used by airframe assembly, maintenance, repair and overhaul facilities.

Modular Drill Motors & Attachments (JMD)

JIFFY® AIR TOOL pioneered the “Modular Tool” platform for drill motors and attachments (JMD). JIFFY® motors can accept a wide variety of drill attachments to meet limited access requirements.JIFFY® Pistol Grip Straight style drilling tools are offered in models with forward running, reverse running and reversible functions, safety trigger option, 250 – 20,000 RPM, and 0.3 – 1.5 HP.  Available Thread Sizes: 1/4-28, 10-32, 9/32-40, 5/16-24, 3/8-24 and 7mm Collet.

Modular Fastener Installation Tools (JMI)

With JIFFY® modular fastener installation platform installation motors can accept a wide variety of install attachments to meet limited access requirements. The latter are available in 17° indexable or fixed, 20° indexable or fixed, “L”, and straight install type offered in various series correlating to the torque capacity of the fastener. Their versatility is further enhanced by the three offered drive styles: a socket and key system,a flush gear with a key and a hex through with no key control to allow access to confined space installations.

In addition to the modular installation tools, ratchet install tools in straight, 17° and 20° head styles are also available. Their pneumatic ratchet wrenches can be used for HI-SHEAR fastener (*) installation quickly, easily, and efficiently. Their new & improved spring loaded hex tip holder allows the use of special hex tips that will hold the HI-LOK™ style fastener in place when installing non-interference fasteners. With the new & improved design, hex tips are easier than ever to change and can literally be changed in just a few seconds.JIFFY®  sockets and hex tips (sold separately) can be used with these wrenches.

For additional information please refer to the supplied documentation or contact us.

 (*) HI-SHEAR CORPORATION Fastening System includes HI-LITE™, HI-LOK™ and HI-LOK™/HI-TIGUE™ pin and collar fastener combinations. The HI-LOK™ fasteners are the second most used fasteners in aircraft structural assembly after the solid rivets MS20470 and MS20426. The HI-LOK™ fastener system includes a rivet pin (similar to a screw but with additional advantages) and a collar (similar to a nut). Pneumatic installation/removal tools for HI-LOK™ or HI-LOK™ style fasteners are also offered by  HS Tooling and U.S Air Tool Co. (USATCO). Please refer to the respective product presentations.

HSTOOLING (formerly HI-SHEAR TOOLING) is a brand of ZEPHYR Manufacturing Co., Inc. (aka Zephyr Tool Group) designing and manufacturing the highest quality aerospace and industrial assembly tools and tooling systems.

HSTOOLING product porfolio includes installation, assembly and repair tools for Aerospace (air drills, riveters, both conventional rivet hammers and compression riveters, specialty fastener installation and other tools and accessories).

HSTOOLING ULTRALITE® compression riveters include different models covering different capacity requirements for aluminum and steel.They are  offered in Alligator jaw and C-Yoke models and feature ergonomic design, weight reduction vs. comparable-force models, high-strength forged jaws and C-yokes, precison bearings and shafts.  The new 702 and 702T alligator models posess outstanding force-to-size ratios. 

HSTOOLING Air Driver Assemblies are designed specifically for installing HI-SHEAR CORPORATION HI-LOK™ (*), HI-LITE™,  and HI-LOK™/HI-TIGUE™ pin and collar fastener combinations. They come in a variety of sizes and configurations, to drive fasteners in both open and restricted-access areas. Compact, lightweight, fast and reliable HSTOOLING tooling systems generate low noise compared with conventional riveting, require minimum employee training, and are designed to operate at a normal factory air pressure of 90 psi with 1/4 or 3/8 inch air lines.

Installation/removal tools for Hi-Lok™ or Hi-Lok™ style fasteners made by Jiffy Air Tool and USATCO are also offered. Pleae refer to the respective product presentations.

For additional information please refer to the supplied documentation or contact us.

(*) The HI-LOK™ fasteners from HI-SHEAR CORPORATION, subsidiary of LISI AEROSPACE, are the second most used fasteners in aircraft structural assembly after the solid rivets MS20470 and MS20426. The HI-LOK™ fastener system includes a rivet pin (similar to a screw but with additional advantages) and a collar (similar to a nut).

MS20604 and MS20605 Standard pull-thru rivets are unique blind rivets typically used in nut plate applications. MS20604 and MS20605 series blind rivets are superseded by those of NASM20604 and NASM20605 respectively.They are both non structural blind rivets with universal head (MS20604) or 100 deg. flush head (MS20605). These rivets are ideal in circumstances with very limited clearance while allowing for a secure set on both sides of the application. The symmetrical insertion allows for access and installation on either side while retaining its blind rivet capacity of one-sided installation. NASM/MS 20604 rivets come with a Universal Head, allowing for ease of installation while retaining strength and security. 

Sourced from quality manufacturers, NASM20604/MS20604 and NASM20605/MS20605 blind rivets are offered either as part of our own label (AVIATIONEU NEW ERA) product lines or as OEM parts of PCC CHERRY® AEROSPACE and other manufacturers (separately listed). They are available in different mil-spec approved materials, such as 2117-T4 grade Aluminum or 5056 Grade Aluminum, finishes and sizes. They are sold in packs of specified number of rivets per pack indicated after the letters "PK" in the product reference code (SKU).

AICRAFT TOOL SUPPLY (ATS) is a manufacturer of tools and hardware for the aviation industry. ATS offers an extensive range of aircraft countersink cutters and piloted aircraft stop countersink cutters (aka Micro-Stop cutters or Microstop Countersinks) used to make precision countersinks to accept flush-head fasteners.

Our offered ATS countersinks include:

HSS 1/4-28 male threaded 3 cutting flute pilot cutters,

HSS 1/4-28 male threaded, 1/2” diameter zero flute pilot cutters,

HSS 1/4-28 male threaded removable pilot cutters with solid carbide tip (require 1500P pilot),

Hollow cutters designed to cut away swagged or threaded collars from fasteners,

Respective offered ATS Microstops include:

133-HD heavy duty Microstop Countersink with ball bearings for ultra smooth operation. The ball bearing design also makes it run much cooler than a standard microstop,

133-Mini Microstop Countersink for use  in tight areas that can’t be reached by a standard cage. 

133-Slim Microstop Countersink packing all the features of a standard microstop in a slim design of only 11/16” in diameter. 

 Complete kit is a great package deal featuring our 133

133 Microstop Countersink Kit which includes the Microstop and 4 pilot cutters (1000-100 series) in sizes #40, #30, #21, and #12. The kit is also offered with the countersink only.

For additional information please consult the supplied documentation or contact us.

HOWMET® AEROSPACE Inc. (formerly ARCONIC Inc.) develops and manufactures high performance, engineered products and solutions for the aerospace, industrial gas turbine, commercial transportation and oil and gas markets. HOWMET® FASTENING SYSTEMS product range under different brands offers the greatest breadth and depth of fastening solutions available including self-locking nuts, quick-release fasteners, draw latches, threaded inserts, lock-bolts, and structural blind fasteners.

HOWMET FASTENING SYSTEMS structural blind fasteners and lockbolts (including those under HUCK® brand) are designed to provide permanent, vibration-resistant, superior-quality joining solutions for use in aerospace and industrial applications. Suited for applications where the joints are integral to the structure, they offer high tensile, shear & clamp properties.  For additional information please refer to the Product Description section and the supplied documentation. Installation tool systems (separately listed) are also offered.

POP® PRG510A/MCS510A series air rivet guns are strong, compact, and trouble-free pneumatic tools ideal for continuous high-production riveting. Αvailable with either a deflector (PRG) or with a Mandrel Collection System (MCS). The PRG-511 A offers an extended nose housing for improved access. Sets aluminum in sizes 3/32″ – 3/16″ in open-end and closed-end POP rivets.

Avdel® is part of STANLEY® Engineered Fastening, offering a wide range of structural and non-structural blind rivets, speed blind rivet fasteners, lockbolts, and tooling systems.

Avdel® blind rivets are made of steel, plastic or other materials with different strengths and material thicknesses.They are ideal for situations where access to the connecting materials is only possible from one side, and used in all manufacturing industries worldwide for almost every assembly task to ensure a secure hold.

Avdel® structural rivets are made for the highest demands due to their high resistance against shear and tensile forces and come in different product lines including Avibulb® XT, Avinox® XT, Hemlok®, Monobolt®, Interlock®, Q-Rivet®, and Klamp-Tite® Structural.

Avdel® non-tructural rivets are used on assemblies without high requirements regarding resistance against shear and tensile force. Like their structural counterparts they come in different models including Avex®, Stavex®, Avinox®, Avibulb®, Bulbex®, T-Lok®, Avdelmate®, and Klamp-Tite® Non-Structural.

Avdel® Avdel Speed Blind Fasteners are designed for fast and reliable fastening of metals, plastics, composites, and passive electronic components in mid- and high-volume application. Available in a broad choice of materials, finishes, lengths, and diameters, they have been originally designed for the aerospace industry, but now on assembly applications for household goods, lighting, electronic sub-assemblies, light metal fabrication and automotive. Speed blind fastener solutions include Briv®, Chobert®, NeoSpeed®, Rivscrew®, Avsert®, Avtronic®, Avlug®, Grovit®, and Double Flush Chobert®.

Avdel® Lockbolts are two-piece fasteners designed for high-strength and secure assemblies.Quick and easy to use, they provide protection against unwanted loosening and are the ideal when a welding or a screw-nut connection is not not possible, practicable, or too time consuming. Frequently used in commercial vehicles, railway, construction, solar field construction and container manufacturing. Avdel® lockbolts offer perfect resistance to vibration and material fatigue due to the swaged lock which forms collar material permanently into the circular grooves of the bolt. Respective product lines include NeoBolt®, Avdelok®, Avdelok® XT, Maxlok®, Avtainer®, and Avbolt®.

Avdel® Blind Rivet Nuts provide a fast, reliable and cost effective system for the introduction of high-quality, load-bearing threads. They offer many advantages against weld nuts, thread forming screws, press nuts and screw / nut combinations. Product range includes Eurosert®, Nutsert®. Hexsert®/Euro Hexsert®, High Strength Hexsert®, Squaresert®, Versa-Nut®, Jack-Nut®, and Well-Nut®.

In addition to fasteners Avdel® offers a range of powerful and lightweight manual hand tools, hand-held hydraulic tools, hydro-pneumatic tools, battery powered hand tools for processing blind rivets, speed rivets, blind rivet nuts and lockbolts.

Gauges (also termed as gages) and gauge scales are widely used for inspection or measurement of correct grip length of  rivet pins, shear lockbolts, structural screws and bolts in aerospave and industrial applications. They ensure correct fastener selection, enhancing structural integrity, simplify the measurement process saving time during assembly, and improve accuracy in maintenance and repair tasks. Made from durable materials for long-lasting use (including high-strength alloys and stainless steel) they come with easy-to-read markings for quick and precise measurement.

Protrusion grip gauges & their assemblies (including apart from the grip gauge a grip gauge slide) can be supplied for use on HI-SHEAR Hi-Lilte®/Hi-Lok®/Hi-Tigue® Series of fasteners or those from PCC CHERRY AEROSPACE. 

These gauges are offered as sets of blades with different color markings for different nominal diameter sizes in Inch or Metric (mm) systems with the letter "M"in their part number denoting a Metric version. For example, those with 2-1522 part number, include five stainless steel blades (5/32", 3/16", 1/4", 5/16", and 3/8") on a keychain for portability, and can be used  with HI-SHEAR Hi-Lok®/ Hi-Tigue® fasteners ensuring proper pin protrusion for safe aviation fastener applications.Their counterparts, 2-1522HST are suitable for HI-SHEAR Hi-Lilte® fasteners. 

Grip Gauge Scales with or without a slide are also offered with measurement graduations in inches or inches and millimeters. The 269C3 Grip Gauge Scale from PCC CHERRY AEROSPACE, made of high-strength alloy, has been designed for precise grip measurement in various materials in aircraft structures. Can be used with CherryMax® & CherryLok® rivets. Its durable construction ensures long-lasting use, while its clear markings for quick reference, and user-friendly design for easy insertion into prepared holes for reliable readings, simplify the measurement process.

Depending on the selected part & stock conditions, grip gauges & scales for HI-SHEAR and PCC CHERRY AEROSPACE fasteners can be supplied as OEM parts or equivalent parts from other suppliers, such as OMEGA TECHNOLOGIES (separately listed) meeting or exceeding specifications. 

Economy models of gauges for shop rivet heads and rivet lengths are also available from ATS and AVERY TOOLS and can be used for measuring both universal head and flush rivets. Rivet head gauges are offered as a set of four gauges for -3, -4, -5, & -6 rivet sizes permanently stamped on each gauge. Each gauge measures MINIMUM height and MINIMUM diameter of shop heads AFTER setting eliminating guessing if the rivets are properly set, and are color coded with anodized finish. Their respective rivet length gauges measure -3, -4, -5 & -6 rivets and have been designed for checking the length of rivets BEFORE setting. Their set of rivet head gauges and the length gauges can be ordered as kits or separately.

For more information please contact us.

Solid shank rivets are relatively low-cost,  permanently installed fasteners used as structural parts in aircraft and other applications where reliability and safety consist a priority.  These rivets are produced in accordance with military and other international standards such as US Army-Navy (AN) standard and Mil-Spec (MS) that followed. AN426/MS20426 and AN470/MS20470 Series rivets are solid aluminum rivets with countersunk head or universal head respectively. Sourced from quality suppliers they are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  available in different diameters and lengths and sold by the pound (lb). Those designated by the letter "A" in their part numbers are "soft" rivets fabricated from 1100-grade aluminum with a tensile strength of 16,000 PSI while rivets designated by the letters "AD" are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. For additional information please refer to the article on an overview of our fasteners, other supplied documentation, the individual product presentations or contact us.

ATI® TOOLS 110C series flush straight drive rivets with rubber guard are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. They feature protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

ATI® TOOLS 107A series flush straight drive rivets are manufactured from S2 high-grade shock-resistant steel and machined in accordance with MIL-STD GGG-R-425. Large radii at critical points enable these rivets to withstand continuous rugged use.They are slightly crowned with a highly polished face designed for rapid flush riveting where a smooth skin surface is essential and feature large radii at critical points to prevent breakage, protection with plastic coating to prevent damage during shipment and storage, blended radius between cup and chamfer with no sharp edges, which coin or mar skin, highly polished precision cup, free of machine marks and ridges and chamfered corners. Shank diameter 0.401".  Different sizes are available serve specification requirements for face diameters and lengths.

Solid shank rivets are relatively low-cost,  permanently installed fasteners used as structural parts in aircraft and other applications where reliability and safety consist a priority.  These rivets are produced in accordance with military and other international standards such as US Army-Navy (AN) standard and Mil-Spec (MS) that followed. AN426/MS20426 and AN470/MS20470 Series rivets are solid aluminum rivets with countersunk head or universal head respectively. Sourced from quality suppliers they are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  available in different diameters and lengths and sold by the pound (lb). Those designated by the letter "A" in their part numbers are "soft" rivets fabricated from 1100-grade aluminum with a tensile strength of 16,000 PSI while rivets designated by the letters "AD" are fabricated from 2117 aluminum and heat treated to the T4 condition. They have a shear strength of 26,000 PSI and a tensile strength of 38,000 PSI. For additional information please refer to the article on an overview of our fasteners, other supplied documentation, the individual product presentations or contact us.