MIL-DTL-38999 Series I Connectors are high-performance cylindrical connectors used on  aerospace and other applications. Sourced from reliable manufacturers such as AMPHENOL, TE CONNECTIVITY, CORSAIR and others they are offered in different sizes,  shell styles, materials and finishes. Designed for rugged reliability, they provide excellent vibration, corrosion and shock resistance, and offer excellent EMI protection and shielding effectiveness. Please refer to the supplied documentation for additional information.

The FAA TSO'd RCA26AK (14V) and 26BK (28V) series of electric attitude indicators (artificial horizons) by KELLY MFG (RC ALLEN) are known for their dependability and ruggedness. They incorporate tremendous advances in presentation, precision, and reliability.With a proven track record for dependability and ruggedness, the attractive new extended color schemes and ultra-precise spherical presentation (eliminating old parallax problems) they set a new standard for safety.These gyros provide a more accurate IFR reference for the beginning instrument pilot or a Cat II captain. A new three phase motor/inverter is designed into the gyro enabling it to operate at lower temperatures which extends to useful life. The instruments employ a new, high precision air erection system which provide erection torque for maintaining a proper vertical alignment reference. The erection air is supplied by a turbine pump which is integrally coupled with the gyro motor. Through maximum utilization of unitized construction the design is free of resonant frequencies below 100 HZ and thus cannot respond to low frequency disturbances which can cause dither and premature wear out of the unit. The display portion of the instruments has a directly coupled roll movement, and a pitch movement mechanism identical to that of the field proven vacuum gyros produced by R.C.Allen since 1966. A "pull to cage" spring type force limited mechanism assures immediate alignment and stability whenever power has been applied to the gyro, a feature non-existent on vacuum driven gyros. These artificial horizons have a hybrid inverter which converts the aircraft DC power to the required voltage and frequency for motor operation. All units have a pull cage knob and a power failure flag that drops into view whenever the supply voltage is lost or when the voltage has dropped below a level of acceptable for proper operation of the gyro. Slip indicator can be added to satisfy FAA AC91-75 upon request. Available in 14V or 28V voltage versions with fixed or movable pointer, lighted or unlighted, power failure flag, panel tilt and optional inclinometer. Mating connector MS3116E8-4S and panel screws are now included with each new instrument at no extra charge.

Dimensions: 3.38"W x 3.38"H x 8.14"L

Weight: 2.3 lbs.

MID CONTINENT® INSTRUMENT (MCI) FAA/PMA approved precision quartz lighted clock meeting rugged aircraft environmental standards. Available in 14 Volt or 28 Volt versions.

The SIRS "Navigator" magnetic compass delivers extremely accurate readings due to its fully integrated, 4 magnet correction facility.  It has the same features as the "Pegasus", but is mounted with a fully adjustable bracket that allows attachment to a variety of positions including the glare-shield or the windshield. This allows the compass to be located away from magnetic influences. Available in different versions for Northern or Southern hemisphere, unlighted  or lighted 12/28V and has a 3-year warranty. Size: 203/8" H x 2-1/4" W. Product accessories such as installation kit, GS1 glareshield mount, SIRS MF1 short foot bracket and SIRS compass correction key are also available and sold separately.

Used on most major civil and military programs, RADIALL™ DSX Series ARINC 404/SAE-AS81659 Connectors offer a proven solution to electrically connect equipment rack to avionics equipment. The DSX series are multipin, rack and panel style connectors designed to electrically connect equipment racks to avionics equipment. Typically the plug is installed on the avionics rack and the receptacle on the equipment box. Applications include commercial and military aircraft and helicopters, railway, radar systems, power circuits, in-flight electronic instrumentation and flight simulators.

Different DSX Series versions are outlined below:

DSX SAE AS81659, available in four shell sizes (1, 2, 3 & 4) with environmental and non-environmental versions as well as EMI/RFI options to improve shielding effectiveness. DSX SAE AS81659 connectors cover both civil and military applications.

DSX ARINC 404 shell type A and B are the original connectors, mainly dedicated today to commercial applications.

DSX-F and DSX-K receptacles, RADIALL™ solution for front release front removable (FR/FR) contacts to facilitate installation and maintenance. Fully intermateable with ARINC 404 type B and SAE AS81659 plugs, they offer the same characteristics as SAE AS81659 connectors.

Shell types are plugs and receptacles made from an aluminum alloy with cadmium yellow chromate or nickel plating options. Mismating is prevented by a polarizing system which provides 216 polarizing positions. For military part numbers, applicable polarizing position range goes from 00 through 99 only. Inserts are offered in various contact arrangements accommodating rear release, rear removable signal (size 22) power (sizes 5, 12, 16 & 20HD), coaxial (sizes 1, 3, 5, 7, 9 & 15), concentric twinax (sizes 5 & 9) triax (sizes 5 & 9) contacts in crimp, wire wrap or PC tail termination. Radiall’s 29504 fiber optic termini are also available. With numerous configurations and a wide variety of contacts and accessories, the  RADIALL™ DSX Series offers for both OEMs and aircraft manufacturers robust and high performance solutions fully compliant to SAE AS81659 specifications listed on the qualified product list (QPL)as well as ARINC 404 commercial connectors.

For additional information please refer to the supplied documentation.

Note: Special Order items. Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Contact us.

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Revolution Counters (Tachometers)/HOBBS meters are used in BRP-ROTAX® aircraft engines. They are offered as certified or non certified parts from BRP-ROTAX® but also from other manufacturers.  Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation. Certified parts are designated by the letters "CERT" after the part number in the product reference number (SKU).

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

EASA Certified VHF transceiver with 6W output power and 8.33kHz frequency spacing.

These precision quartz electric aircraft clocks are constructed for easy installation in a wide variety of replacement applications for home builts. The rugged quartz movement is accurate within 2 sec. in 24 hrs under normal operations and runs accurately in temperatures from -30º to 180ºF. Available in 14 Volt or 24 Volt versions.

Product Specifications:

OD: 2-1/4"

Depth: 2"

Weight: 4 ounces

"AR" Series connectors from AMPHENOL are multi-purpose connectors used in aerospace, military and computer periphery applications. Designed per ARINC 404 specifications AR connectors utilize pin and socket contacts manufactured in conformance with MIL-C-39029. They meet or exceed the requirements of MIL-C-81659 and ARINC Specification 404.

These connectors are available in five shell styles with up to four insert cavities. Inserts in AR product line accommodate signal and power contacts in sizes 12, 16, 20 and 22. Coaxial contacts are available in sizes 5 and 9. Insert arrangements are available utilizing a single type contact or a combination of standard and coaxial contacts.

Non-environmental and environmentally sealed connectors are offered. The environmental sealing is accomplished by wire sealing grommets and interfacial seals. Application specific designs, including transient protection, are available from Amphenol. 

For additional information please refer to the supplied documentation.

Note: Special Order items. Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Contact us. 

Static dischargers, commonly known as static wicks or static discharge wicks, are installed on the trailing edges of aircraft, including (electrically grounded) ailerons, elevators, rudder, wing, horizontal and vertical stabilizer tips. They are high electrical resistance (6-200 megaohm) devices with a lower corona voltage than the surrounding aircraft structure and used on aircraft to allow the continuous satisfactory operation of onboard navigation and radio communication systems during precipitation (p-static) conditions.  This wick comes with 2 holes to rivet to trainline edge and plain wire extension. Eligible For Installation in aircraft: Beech Baron 58, Cessna 402, Eurocopter: BK117, BK117 C-2.

The SWITCHCRAFT® line of jacks and plugs is ideal for instrumentation and audio connections. They can be used in a variety of applications such as medical equipment, manufacturing data equipment, GPS tracking and data logging systems or security applications.

The product line includes 1/4", .141", .206", 3.5 mm, DC Power, Bantam TT, .101" Micro, Aircraft jacks and plugs and 2.5mm Surface Mount,  MDSMT series jacks.

The SWITCHCRAFT® range of Headphone/Microphone jacks come with nut and washer and feature contact springs are of special alloys for long life, insulation is high dielectric strength phenolic, tinned terminal lugs for easy soldering and short frame. They mount by 3/8-32 threaded bushing and nut. Open circuit until plug inserted. Different jacks are offered including:

SWC-11-JJ-034 MONO Headphone Jack - 2 circuit conductor

SWC-12B STEREO Headphone Jack - 3 circuit conductor 

SWC-S12B -JJ-033 Microphone Jack - 3 circuit conductor 

KANARDIA HORIS Air Data-Attitude/Heading Reference System (AD-AHRS) includes several state of the art sensors and combines them into a small PFD display. It can serve as standalone PFD displays and it can be used as a primary instrument or as a perfect backup. It is offered as standalone (master) device with integrated sensors or as a slave unit when an I-ALT-IAS or EMSIS PFD or NESIS are present on the CAN bus. AD-AHRS standalone unit shows: attitude (roll, pitch), airspeed (IAS and TAS), vertical speed (Vario) indication, altitude, outside temperature, QNH setting, heading rate (1 minute and 30 seconds turn), tracking course (True or Magnetic). It is offered for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15") and comes supplied with digital outside temperature sensor.

Product Features:

very low power consumption (< 2W at 12V),

low cost,

precise altitude pressure and IAS (indicated airspeed) sensor – connects to pitostatic,

precise angular rate sensors – gyros and accelerometers,

GPS receiver,

digital outside temperature sensor,

lightweight design (weighs only 235 g),

CAN bus compatible.

Available Options for HORIS AD-AHRS 57/80 (sold separately). They must be specified at the time of ordering.

MAGU Electronic magnetic compass.

AP-K Two servos for the two axis autopilot function. Must include also AMIGO.

AMIGO Autopilot panel for direct access to Autopilot functions. Must include also AP-K.

Splits the signal from a single NAV antenna into two NAV receivers and one glide slope receiver.

The vertical speed indicator is a precision instrument which provides an accurate indication of rate of change of altitude. UNITED INSTRUMENTS TSO'd (TSO-C8b) 7000 Series vertical speed indicators (VSI) offer several configurations and have been selected as standard equipment by aircraft manufacturers worldwide for use in most production aircraft.. They are temperature compensated and provided with a zero adjustment screw on the face of the case in the seven oclock position. Power: Static system. Size: 3-1/8" x 3-1/8" x 4", Wt. 0.7 lb. Available in unlighted and lighted versions.

UMA NON TSO'd Electronic Amp Meter Gauges (Ammeters) are available in different series for different measurement ranges and installation in different panel hole diameters. 1-1/4" series allow utilization of panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on analog dials with easy to read markings. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Each gauge can be placed in a 1-1/4” diameter hole and mounted behind the panel with (4) 6-32 screws. They can be cluster mounted as close as 11/2” centers. Also available as new manufacture electric with 2-1/4" dia. Other UMA series of electronic ammeters include 2-1/4" series with moving coil and 85° Sweep and 2-1/4" Dual Amp/ 0-30 volt meters with moving coil  and 85° sweep.

NOTES:

These ammeters come with the suitable shunt. Different shunts are used depending on ammeter part number.

All Part Numbers beginning with the letter "T" are TSO'd for Certified Aircraft.

The GARMIN® GMA 342 is an affordably priced yet loaded with features TSO'd panel-mounted audio panel providing direct slide-in replacement for legacy GMA 340 or select third-party units. It can support dual comm, dual nav, 3 aux receivers and 2 wired stereo music inputs — enhanced with bass boost levels, equalizer settings and exclusive 3D Audio technology that spatially separates the multiple communication sources entering the pilot's headset.  Up to 2 dedicated stereo music sources can be connected via the unit’s rear connectors. With stereo headsets, incoming audio is spatially separated to reflect how different audio sources come from different directions. An automatic digital voice recorder on GMA 342 continuously captures the last 60 seconds of incoming active comm audio for instant playback with a single button press. Advanced auto squelch technology automatically adapts to a quiet or noisy environment without clipping words or cutting out during conversation.

Accessories: If not included in the ordered unit, installation Kit and other accessories are available at additional cost.

The RCA 82A/83A Series TSO'd turn coordinators by KELLY MFG (RC ALLEN) can be found in many production aircraft around the world. They Incorporate an electrical gyro turn indicator with an inclinometer. The turn motion is presented by an airplane symbol banking on a fixed horizon. The inclinometer, by movement of a ball in relation to the lubber lines, indicates the slip angle of aircraft while in a turn. The airplane on the dial rotates with reference to the indices. A power failure flag drops into view whenever the supply voltage is lost or when dropped below a level acceptable for proper operation of the gyro. Operates from 11 to 30VDC. Available in lighted and unlighted versions. First installation requires electrical connector and clamp. Mating Connector: MS3106A-10SL-3S.

Product Specifications:

Meet or exceed requirements of FAA TSO C3b 

Made in the USA

Dimensions

Length: 6 1/5 in. Max

Width: 3 3/8 in Max

Height:3 3/8 in Max

Weight: 1.9 lbs.

Description: 

Unlighted

Mating Connector:

MS3106A-10SL-3S

Connector pin out:

A: +12 -30VDC

B: Ground

C: Spare

RAMI AV-200 Antenna is a passive two frequency (121.5 & 406 MHz) whip antenna for use with a 406 MHz ELT (Emergency Locator Transmitter) in low speed general aviation aircraft (up to 250 knots). It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies.

Product Specifications:

Application: Airbone ELT

Frequency: 121.5, 406 MHz

Impedance: 50 ohms nominal

VSWR: 2.0:1 Max at 121.5 MHz, 1.5:1 Max. at 406 MHz

Polarization: Vertical

Pattern: Omni-Directional

RF Power Capacity: 10 Watts CW

Connector: BNC Female

Max Weight: 0.19 lbs.

Max Height: 24″

FAA TSO C126a

AN5771-4A style 2-1/4 inch hydraulic pressure gauge with steel case connecting directly to the aircraft's hydraulic system. Fits in a 2-1/4" dia. panel opening and has a threaded 1/4"  connection for a fitting. Range: 0-2000 PSI. Only available in Overhauled Condition. Certified with fresh Matte-white dial. Yellow-tagged. Limited availability.

For new design projects and applications please refer to the presentations of alternative TSO'd and non TSO'd electronic hydraulic pressure gauges and pressure senders offered. 

Pressure Transducers (Senders) whenever required, ARE NOT INCLUDED in the prices of hydraulic pressure gauges. They are sold separately.

Note: A yellow tag is similar to a FAA 8130-3 Serviceable tag both denoting the "Serviceable" condition of the product i.e. it has been  repaired as needed, tested according to the manufacturer's procedure, meet the manufacturer's performance specifications and ready to return to service. Yellow tags are issued and widely accepted in North America while a FAA 8130-3 Serviceable tag is is accepted worldwide. The acceptance of yellow tags by national Civil Aviation Authorities should be checked by potential buyers prior to ordering.