DUKANE SEACOM, wholly-owned subsidiary of HEICO Corporation, is the world’s leading supplier of FAA / EASA  & BSH qualified (Certified) high-impact underwater acoustic beacons for  the commercial air transport, business and regional jets, as well as fixed and rotary wing commercial and military markets. Other products in DUKANE SEACOM range include marine underwater beacons for Voyage Data Recorder (VDR) applications and Emergency Locator Transmitters (ELT) separately listed.

The DK120/90 was the first ULB certified to provide a minimum of 90-day underwater operating life. Certified to TSO-C121b & TSO-C142a and ESO ETSO-C121b & ETSO-C142a. Airframe mounted DK180 series low frequency beacon is designed and qualified to meet the newly developed standards FAA TSO-C200 / ETSO-C200 dated 6/26/2012 as per SAE–AS6254 & ARINC 667. For applications not requiring compliance to the 90-day operating requirement, the DUKANE SEACOM DK120/90 and DK140 (short) are still available.  An overview of DUKANE SEACOM Aviation  Underwater Location Beacons is provided in the Product Description Section.

TE CONNECTIVITY™ AMP family of products includes industry-leading connectors, components, cables, and tooling used to transmit data, power, and signal in the machines, devices, and systems helping to make the world safer, sustainable, productive and connected.

TE CONNECTIVITY™ AMP connectors are offered in a wide range of shell configurations/modifications, contact arrangements and contacts to meet ARINC 404 Specification and MIL-C-81659. They are avialable in Commercial,  Military and Miniature Series with the following designations.

Commercial Series

R — Unsealed

RM — Interface seal on pin insert

RME — Environmentally sealed

Unkeyed Single-Insert Series

RMA — Standard size, unkeyed single-insert connectors, unsealed

RMAE — same as RMA, except sealed

Military Series

M — MIL qualified, unsealed

MM — MIL qualified, interface seal on pin inserts

MME — MIL qualified, environmentally sealed

Miniature Series

RA — Unsealed

RE — Sealed

Special connectors are also available—including connectors for flexible flat cable, for wire wrap-type terminations, and with contacts for board-mount applications.

For additional information please refer to the supplied documentation.

Note: Special Order items. Non-Cancellable/Non-Returnable Upon Order Placement (NCNR). Minimum Order Quantities & long lead times usually apply. Contact us. 

MGL AVIONICS XTreme full featured instrument series include an Electronic Flight Instrument System (XTreme-EFIS) with navigation/autopilot capabilities and anEngine Monitoring System (XTreme-EMS). Their light weight, small size and high level of functionality makes them an excellent choice for use in non-certified aircraft. Both instruments fit a standard 3 1/8” (80mm) instrument panel hole. All information is displayed in an easy to read format on a high resolution wide viewing angle 4.3” sunlight readable color display. The XTreme-EFIS includes all the functions of the XTreme-EMS version. It a compact, multifunction electronic flight information system intended as a main flight instrument in smaller aircraft or as a backup/secondary flight instrument in larger aircraft. It integrates all the necessary functionality to replace several flight and engine monitoring instruments.The XTreme-EMS is a compact universal engine monitor replacing several engine monitoring instruments. All engine sensors are connected to a RDAC (Remote data acquisition unit) normally mounted behind the aircraft firewall. A simple CAN communication link is then necessary to connect the XTreme-EMS to the RDAC.

UMA NON TSO'd Electronic Amp Meter Gauges (Ammeters) are available in different series for different measurement ranges and installation in different panel hole diameters. 1-1/4" series allow utilization of panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on analog dials with easy to read markings. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Each gauge can be placed in a 1-1/4” diameter hole and mounted behind the panel with (4) 6-32 screws. They can be cluster mounted as close as 11/2” centers. Also available as new manufacture electric with 2-1/4" dia. Other UMA series of electronic ammeters include 2-1/4" series with moving coil and 85° Sweep and 2-1/4" Dual Amp/ 0-30 volt meters with moving coil  and 85° sweep.

NOTES:

These ammeters come with the suitable shunt. Different shunts are used depending on ammeter part number.

All Part Numbers beginning with the letter "T" are TSO'd for Certified Aircraft.

KANARDIA INDU Series round altimeters are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature colour LCD display, one or two pointers  with possibility to personalise scales (in feet or meters) and LCD displays. They are offered as standalone (master) altimeters with internal pressure sensors or as slave instruments. The slave version requires some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") with one pointer and 80 mm (3.15") with two pointers. They can also be ordered with integrated backup battery at additional cost. The backup battery can also handle and additional indicator, typically an airspeed indicator.

TSO'd Electronic Fuel Quantity gauges from UMA INSTRUMENTS (indicated by the letter "T" in the PN) are offered in 1-1/4 in. and 2-1/4 in. sizes for installation in respective panel hole diameters and mounted with (4) 6-32 screws. Smaller 1-1/4 in. instruments can be cluster mounted as close as 11/2” centers utilizing panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on black analog dials with white easy to read markings indicating empty to full fuel level. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Available in different versions based on their sender type and range. UMA sensors are sold separately.

The ACK A-30.5 altitude encoder adds Mode C capability to aircraft in the most cost-effective way. The ACK encoder is the smallest, lightest, highest quality encoder available today and features the latest solid-state electronics for high reliablity. Installation is quick and easy and usually is completed in less than one hour. It is compatible with most transponders in use today and reports altitude to 30,750 ft. Includes quick-release mounting try, 4-ft. color-coded wiring harness with prewired jack, static line and fittings for installation in any aircraft, and installation manual in any aircraft, and installation manual with popular transponder pin-outs. 3 year warranty.

Product Includes:

• Quick Release Mounting Tray

• 4 Foot Harness 

• 4 Foot Static Line 

• Installation Manual 

Product Features:

High Quality Construction

Gold Plated Connectors

Diecast Aluminium Chassis

Anodized

Product Specifications:

Approvals: FAA TSO C-88a

German LBA 10.221/4

Range: MOD 4 –950 to 30,750 feet /w gray code Output MOD 8 –950 to 42,000 feet /w 2x RS232 Outputs

Accuracy: Typical +- 20 feet Maximum +- 50 feet

Size: L 6” W 2.65” H 1.3”

Weight: 5.1 oz (144 grams)

Operating voltage: 10 to 32 VDC

Operating current: 60 mA typical

Operating temp: -4 to +131° F -20 to +55° C

Warm-up current draw: 14VDC 420 mA 28VDC 220 mA

Warm-up time: 70° F ambient 60 seconds 0° F ambient 210 seconds

Altitude resolution: Gray code (parallel) output 100ft

FALCON GAUGE Non Certified Airspeed Indicators have been one of the most chosen flight instruments by fixed wing airplanes, helicopters and ultralights. The great advantages of these gauges are excellent slow speed characteristics, very progressive increments, a variety of ranges, light weight, short length, and affordable price. FALCON GAUGE Airspeed Indicators ranging up to 80 MPH, 100 MPH, 120 MPH and 150 MPH make for excellent MPH increments for helicopters and ultralight aircraft. All FALCON GAUGE Airspeed Indicators are housed in an aluminum case and consist of all metal parts. They come in 2-1/4" and 3-1/8" sizes. Available ranges: MPH, Knots, KPH; single range or dual range readings. Optional: Custom color range markings can be special ordered. For additional information please refer to the supplied documentation or contact us.

EASA Certified VHF transceiver in 160mm format with 6W output power. Automatic selection of 8.33kHz/25kHz spacing and OLED display.

JPI FS-450 Fuel Scan is a top choice low price unit for fuel management of an aircraft, offeredin different versions with single transducer available for gravity, pressure and ROTAX engines or with a Flow Scan 201 or 231 transducer and harness for pressurized carb engines.

EASA Certified VHF transceiver with 6W output power and 8.33kHz frequency spacing.

DAVTRON Μ475 Series 2-Function voltmeter/ammeter digital indicators are FAA-PMA approved and come in 475VA/475VAA models and versions, both with lighting capability. Model M485VA ls made primarily for remote shunts. They are both designed for low current drain ( .001 Amp) and are also used in standby and emergency battery packs. Other features include: 

Plus Or Minus Amp Range: 150.0 

Plus Volt D.C. Range: 100.0 

Sunlight Readable Display

One Tenth Amp Resolution

One Tenth Volt Resolution

1.3" case depth

2-1/4" Standard mount

EASA Certified 10 W Comm Radio with 25 kHz spacing.

The AV-532 is a VOR/LOC/GS receive only antenna which consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph.

The AV-525 is a VOR/LOC/GS antenna similar in style to the AV-12 but utilizes an internal balun transformer. The antenna is rated at speeds up to 350 mph and altitudes up to 50,000 feet. It is a direct replacement for the CI 157P.

Product Specifications:

Model: AV-525

Application: VOR/LOC/GS Receive Only

Frequency: 108-118 MHz (VOR/LOC) -328-336 MHz (GS)

Impedance: 50 Ohms Nominal

VSWR: 3.0:1 Maximum 108-118 MHz - 2.0:1 Maximum 329-335 MHz

Polarization: Horizontal

Pattern: Omni-Directional

Connector: “BNC” Female

Max. Weight: 0.50 lbs.

Certification: FAA TSO C34e, C36e, C40c

ROTAX® aircraft  engines form part of the product portfolio  of BRP-Powertrain GmbH & Co. KG which develops and manufactures engines for snowmobiles, watercrafts, boats, roadsters, all-terrain and side-by-side vehicles, motorcycles, carts, and aircrafts.

BRP-ROTAX® product range includes certified and non certified internal combustion engines, parts and accessories for light and ultralight aircraft.

Fuel pressure gauges are used in BRP-ROTAX® aircraft engines and offered as certified or non certified parts from their respective manufacturers. Non certified parts can be used in ultralights or other aircraft not requiring certification of parts for their installation.

Aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed BRP-ROTAX® engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the manufacturer for the correct part number before ordering.

Fuel pressure gauges are no longer offered as ROTAX Part Numbers. These part numbers are provided for reference only. For these gauges please refer to our product presentation on AVIASPORT Fuel Pressure Gauges or contact us.

The RAMI AV-10 COMM Antenna is designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base. The antenna essentially matches the styling of the communication antennas currently used on most singles and light twins. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 2.70 lb @ 250 mph.

Product Specifications:

Application: Airborne Communications

Frequency: 118 to 137 MHz

Impedance: 50 Ohms Nominal

VSWR: 2.0 to 1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: Type "BNC" Female

Max Weight: 8 oz

Max Height: 20-1/4"

RF Power Capacity: 25 Watts

AMPHENOL Bayonet Neill Concelman (BNC) product series connectors are miniature quick connect RF connectors. They feature two bayonet lugs on the female connector. BNCs are ideally suited for termination on miniature and subminiature coaxial cable (RG-58, 59, to RG-179, RG-316, etc.). Other BNC series include:

HD-BNC product series featuring the trusted, push and turn interface of a traditional BNC and providing tactile feedback and a positive lock for quick and guaranteed mating and 

Mini-BNC product series allowing higher connector densities while preserving the positive characteristics of the full-size 75 Ω BNC. The Mini-BNC provides the same positive locking bayonet system found on the BNC but allows 40% more interconnects in the same area.

KANARDIA INDU Series G-Meter gauges form part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature a LCD display with possibility to personalise the displays and scales. They are offered as standalone (master) or as slave gauges. Slave versions require some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the bus. These G-Meter gauges  are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15").

UMA line of precision electronic pressure senders feature precision, solid state sensors and circuitry to give unequalled performance and are designed for rugged use in just about any environment.  They are offered in TSO'd and Non TSO'd models and gauge, differential and absolute types. UMA TSO'd electronic pressure senders are the most economical TSO’d units on the market. They are compatible with avgas, jet fuel, engine oil and many other fluids. Because they have internal voltage regulation, they are compatible with indicating instruments that do not have precision output voltages. Units for fuel and oil pressure are certified under TSO C47. Units for manifold pressure are under TSO C45a. For additional information please refer to the attached documentation.