The R.A. MILLER (RAMI) TSO'd AV-74 (.425 Stud Length) & the AV-74-1 (.800 Stud Length) are broadband blade type antennas for transponders or DME applications. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antennas are supplied with cellular neoprene mounting pad and hardware. Designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. They have a drag force of 0.09 lbs @ 250 mph. These antennas are direct replacements for the CI-105 antennas.

Product Specifications:

Application: Transponder/DME

Frequency: 960 - 1220 MHz

Impedance: 50 Ohms Nominal

VSWR: 1.5:1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: "BNC" Female

Max Height: 3.4"

RF Power Capacity: 2.5 kW Peak

FAA TSO: C66c, C74c

HONEYWELL BENDIX KING® manufactures a range of TSO'd VOR/LOC/Glidescope indicators. These navigation instruments include VOR/LOC left-right needles, To-From indicator, VOR/LOC warning flag, glideslope deviation needle, glideslope warning flag and 30Hz OBS resolver. Depending on the model, the feature rectilinear instead of pendulum type meter movements for more precise indicator readings, 14/28 volt internal lighting, metal bezel with glass lens and course datum synchro for autopilot use.

These indicators are commonly used with BENDIX KING® remote mounted VOR/LOC converters such as KN-72 or KN-77, remote mounted Glideslope Receivers such as KN-73 or KN-75, KNS-80, KNS-81 nav systems and KX-155/KX-165 NAV/COMM transceivers.

The KI203 model features an internal VOR/ LOC converter and it is compatible with the BENDIX KING® KX155 transceiver. It has a rectilinear meter movement. Compatible with the BENDIX KING KX155 NAV/COMM transceiver.

The KI 204 VOR/LOC/Glideslope Indicator features a built-in VOR/LOC converter and scallop rejection filter, rectilinear needle movement and an optically coated glass lens. Requires input from external glideslope receiver. Compatible with the BENDIX KING® KX 155 or KX 155A NAV/COMMs. Requires input from external glideslope receiver.

The KI 206 VOR/LOC/Glideslope Indicator is rectilinear and internally lighted. It is used with the KNS 80/81 units, KX 165  transceiver and the KNR 634 VOR/LOC/GS/MB receiver. It is available with course datum synchro.

The KI208 model features a built-in VOR/ LOC converter and it is compatible with the BENDIX KING® KX 155 or KX 155A NAV/COMMs. It has a  pivoted needle action and a plastic lens.

The KI209 model features an internal VOR/ LOC converter and it is compatible with the BENDIX KING® KX155 transceiver. It features a pivot needle action.  The KI209 model includes GPS interface capability.

LONE STAR AVIATION manufactures multiple fans and blowers for OEM applications.

The CYCLONE 100 FAA-PMA approved 1 port blower is the smallest (1 x 2 x2 ), most efficient (brushless dc motor), and the most versatile cooling fan for avionics and or other electronics needing thermal cooling. Its universal mounting bracket makes it easy to set-up and install on on many make and model aircraft and or rotor-craft.  Also installed in Land-Mobile, Marine and Military Vehicles for many PED, radio, GPS applications. Offered in Input 12VDC/24VDC versions.

Lone Star Aviation's new FAA-PMA approved Cyclone 1 port blower is the smallest (1 x 2 x2 ), most efficient (brushless dc motor), and the most versatile cooling fan for avionics and or other electronics needing thermal cooling. Its universal mounting bracket makes it easy to set-up and install on on many make and model aircraft and or rotor-craft.  Also installed in Land-Mobile, Marine and Military Vehicles for many PED, radio, GPS applications. 

The CYCLONE 21 FAA-PMA approved 3 port blower is a compact (3 x 3 x 1") aircraft electronics cooling fan that delivers 21 cubic feet per minute of forced air cooling to a variety of avionics equipment. It is the top FAA approved avionics blower for 14/28 volt aircraft with the smallest footprint and the highest output but also the number one choice for OEM and aftermarket sales world-wide for many make and model aircraft and rotor-craft.

For more information on the above products please consult the Product Description section and the supplied documentation.

The COBHAM Antenna Systems' COMANT product range includes aviation antennas focusing on GPS, Communications and Navigation products for General Aviation, light Jets and helicopters.COMANT antennas offer a wide variety of fit, form and function options that will fit nearly every need. Comant antennas are compatible with a number of varying applications and effective in a number of differing environments. The range includes Radiophone, DME, VHF, VOR, LOC, GS, DME, Transponder, FM, AM, UHF, L Band, ELT, and COMDAT antennas. COMANT Antennas have been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offer the 118 to 137 MHz frequency associated with DO 186A MOPS. They no longer come with a gasket or template which must be ordered  order separately.

The SWITCHCRAFT® line of jacks and plugs is ideal for instrumentation and audio connections. They can be used in a variety of applications such as medical equipment, manufacturing data equipment, GPS tracking and data logging systems or security applications.

The product line includes 1/4", .141", .206", 3.5 mm, DC Power, Bantam TT, .101" Micro, Aircraft jacks and plugs and 2.5mm Surface Mount,  MDSMT series jacks.

The SWITCHCRAFT® range of Headphone/Microphone jacks come with nut and washer and feature contact springs are of special alloys for long life, insulation is high dielectric strength phenolic, tinned terminal lugs for easy soldering and short frame. They mount by 3/8-32 threaded bushing and nut. Open circuit until plug inserted. Different jacks are offered including:

SWC-11-JJ-034 MONO Headphone Jack - 2 circuit conductor

SWC-12B STEREO Headphone Jack - 3 circuit conductor 

SWC-S12B -JJ-033 Microphone Jack - 3 circuit conductor 

The SIRS "Navigator" magnetic compass delivers extremely accurate readings due to its fully integrated, 4 magnet correction facility.  It has the same features as the "Pegasus", but is mounted with a fully adjustable bracket that allows attachment to a variety of positions including the glare-shield or the windshield. This allows the compass to be located away from magnetic influences. Available in different versions for Northern or Southern hemisphere, unlighted  or lighted 12/28V and has a 3-year warranty. Size: 203/8" H x 2-1/4" W. Product accessories such as installation kit, GS1 glareshield mount, SIRS MF1 short foot bracket and SIRS compass correction key are also available and sold separately.

The 730/830 Engine Monitoring Systems (EDM) from JP INSTRUMENTS revolutionize engine monitoring by the compact size integration of a full color graphical LCD display with the extremely popular EDM 700/800 series functionally. Both 730 and 830 EDMs feature: colourful graphics, larger data display for easy reading, parameters in full colour, annunciation of exceedances, less page swapping, more data per page. The units are "Plug and Play" compatible with existing EDM-700/800 units. Oil pressure has also been added to the entire EDM series line.  Both 730 and 830 are FAA approved for use as secondary engine monitors. However they CANNOT BE USED as a replacement for primary gauges which have to be maintained. Different options and accessories are also available at additional cost.

VDO Fuel Level Gauges have always been known for the superb fit, finish, and appearance, as well as the wide range of styles VDO offers. VDO Fuel Level 10-180 ohm Gauges  are offered in 2" and 2-1/4'" diameters with matching Fuel Level Senders  (aka sensors or probes) for their operation. This 12/24 VDC Fuel Level Sender has a resistance rating of 10 ohms when the tank is empty and 180 ohms when full. The unit can be adjusted to read accurately in tanks from 6" to 23" deep. In the case of the 2" 33-240 ohm Fuel Gauge, the appropriate fuel sender is P/N 226-007.  

VDO product range also include Standard Tubular Level sensors mounted direct into the tank with different tube diameters and lengths from 200 mm to 650 mm and different resistances. They feature:

- Resistance output

- Compatibility to the VDO gauges 301-010-00X and X10-110-981-009  (adjustable to 60 to 90 Ohm at empty).

- M4 bolt and hexagon nut or 6,3 x 0,8 mm spade terminal

- Optional ground connector

- Optional warning contact

- Mounting bolt circle 54 mm dip tube fuel senders with different tube diameters and lengths.

For additional information please consult the supplied documentation or contact us.

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

AVIASPORT Oil Pressure indicators (gauges) are designed specifically for ROTAX 912/914 aircraft engines with painted red, green, and yellow gauge markings. are available in two sizes: 52 and 57 mm. They are offered in two unit versions for readings in PSI or Bars. They work with different pressure sensors depending on these installed in ROTAX 912/914 engines: the VDO sensor (Before September 2008) or the 4..20mA sensor (after 2008).

HONEYWELL BENDIX KING® KI-229 Radio Magnetic Indicator (RMI) provides bearing information to either ADF or VOR stations by means of two pointers each of which is read against compass card.

The KI-229 RMI combines three data points on one indicator. The current aircraft heading from an HSI is shown on the card. The magnetic headings to VOR and NDB stations are shown by the twin needles. By combining all this information visually, less interpretation is required thus enhancing overall situational awareness, something especially helpful when the workload is high.

The KI-229 requires inputs from ADF, HSI and NAV receivers.

Product Features:

14/28 volt lighting

Compatible with Nav Receivers such as KN-53, KNR-615, KNR-630/631/632/633, KNR-634, KNR-665, and KNR-665A

Compatible with Nav systems including RNAV such as KNS-80 and KNS-81

Compatible with ADF receivers such as KR-87 and KDF-806

Compatible with Compass systems such as KCS-305 and KCS-55/55A

Requires input ARINC Compass System

TSO'd

Product Specifications:

TSO Compliance: Env. Cat. RTCA DO-160A A1C1/A/SKP/XXXXXXA/B/AAA

Weight: 2.8 lbs. (1.3 kg)

Temperature: -20 to +55°C

Altitude: 35,000 feet

TSO (Compass): TSO C6c

TSO (ADF): TSO C41c Class A

TSO (VOR): TSO C40a

Heading Input: Operates from any slaved magnetic compass with ARINC X,Y,Z outputs

VOR Video Input: 0.5VRMS 0 deg. phase composite 30Hz variable AM and 30Hz reference FM on a 9960Hz carrier (0.7VRMS maximum)

The TT31 is a power-efficient, inexpensive, Mode S transponder by TRIG AVIONICS  that meets the European elementary surveillance requirements. The TT31 fits in the same mounting tray as the BENDIX KING KT76A transponder, making it a great choice for either upgrades or new installations. The TT31 plug and play design minimises the cost and downtime for the upgrade. The TT31 is TSO approved for fitting to European and FAA registered aircraft. With a new software upgrade and a connection to an appropriate GPS, this will make the TT31 compliant with the FAA final rule on ADS-B Out (TSO C166b) for 2020.

Product Features:

European Mode S (*)

Low Power Consumption

No Cavity Tube

240 Watts Nominal Output

Plug and Play Installation

Backlit LCD Display

Easy to Use Rotary Knobs

Timer/Stopwatch Function

Altitude Monitor

Certified 1090ES/ADS-B Out (TSO C166b)

NOTE (*): All Mode S transponder upgrades for EASA certified aircraft must be carried out by a licensed engineer using a Minor Change approved by EASA. 

Pre-approved Minor Changes for popular aircraft types may be available for this device. In this case no EASA fees for the issue of Minor Change approval apply. Contact us for more information.

BENDIX KING KG 102A TSO'd Remote Mounted Directional Gyro can be used in in BK KCS 55A compass system  in conjunction with KMT 112 Magnetic Azimuth Transmitter to provide a gyro-stabilized magnetic heading to KI 525A HSI.

GARMIN® GTX™ transponder product line includes Mode A/C and Mode S TSO'd panel mounted transponders offered in a‭ ‬wide variety of configurations to choose‭ ‬from‭, ‬depending on desired functions‭.‬ Different models are listed under separate product presentations. 

GARMIN® GTX™ 328 solid-state Mode S digital transponder covers EU VFR Mode S requirements and is IFR certified for aircraft operating under 15,000 feet and with a true airspeed of under 175 knots. The GTX™ 328 includes many of the features of the GTX™ 330 transponder  at an affordable price such as outside air temperature, count up/down timers, altitude monitoring, density altitude functions, front-panel input for flight ID and has a digitised voice output for pilot warning of altitude limits or timer expiration.

The FAA TSO'd RCA26AK (14V) and 26BK (28V) series of electric attitude indicators (artificial horizons) by KELLY MFG (RC ALLEN) are known for their dependability and ruggedness. They incorporate tremendous advances in presentation, precision, and reliability.With a proven track record for dependability and ruggedness, the attractive new extended color schemes and ultra-precise spherical presentation (eliminating old parallax problems) they set a new standard for safety.These gyros provide a more accurate IFR reference for the beginning instrument pilot or a Cat II captain. A new three phase motor/inverter is designed into the gyro enabling it to operate at lower temperatures which extends to useful life. The instruments employ a new, high precision air erection system which provide erection torque for maintaining a proper vertical alignment reference. The erection air is supplied by a turbine pump which is integrally coupled with the gyro motor. Through maximum utilization of unitized construction the design is free of resonant frequencies below 100 HZ and thus cannot respond to low frequency disturbances which can cause dither and premature wear out of the unit. The display portion of the instruments has a directly coupled roll movement, and a pitch movement mechanism identical to that of the field proven vacuum gyros produced by R.C.Allen since 1966. A "pull to cage" spring type force limited mechanism assures immediate alignment and stability whenever power has been applied to the gyro, a feature non-existent on vacuum driven gyros. These artificial horizons have a hybrid inverter which converts the aircraft DC power to the required voltage and frequency for motor operation. All units have a pull cage knob and a power failure flag that drops into view whenever the supply voltage is lost or when the voltage has dropped below a level of acceptable for proper operation of the gyro. Slip indicator can be added to satisfy FAA AC91-75 upon request. Available in 14V or 28V voltage versions with fixed or movable pointer, lighted or unlighted, power failure flag, panel tilt and optional inclinometer. Mating connector MS3116E8-4S and panel screws are now included with each new instrument at no extra charge.

Dimensions: 3.38"W x 3.38"H x 8.14"L

Weight: 2.3 lbs.

The GARMIN® GMA 342 is an affordably priced yet loaded with features TSO'd panel-mounted audio panel providing direct slide-in replacement for legacy GMA 340 or select third-party units. It can support dual comm, dual nav, 3 aux receivers and 2 wired stereo music inputs — enhanced with bass boost levels, equalizer settings and exclusive 3D Audio technology that spatially separates the multiple communication sources entering the pilot's headset.  Up to 2 dedicated stereo music sources can be connected via the unit’s rear connectors. With stereo headsets, incoming audio is spatially separated to reflect how different audio sources come from different directions. An automatic digital voice recorder on GMA 342 continuously captures the last 60 seconds of incoming active comm audio for instant playback with a single button press. Advanced auto squelch technology automatically adapts to a quiet or noisy environment without clipping words or cutting out during conversation.

Accessories: If not included in the ordered unit, installation Kit and other accessories are available at additional cost.

CLEMENT CLARKE COMMUNICATIONS LTD. designs and manufactures headsets for use in Airlines, Air Traffic Control/Management (ATC/ATM) and Emergency services as well as National & NATO Armed Forces worlwide. Their headsets combine ergonomics  to ensure maximum comfort and ease of use, quality, durability, reliability and technological advancements for faultless 100% crystal clear performance, light weight, and extensive customization through a wide range of different options (*) to meet intended applications' requirements.

They are offered in different series outlined below:

Airlite 100 Series Headsets designed and built for the aviation industry with lightweight construction, noise cancelling microphone as standard and crystal clear communications.

Airlite 62 Series Headsets  for air traffic controllers, known globally for their quality of build, exceptional audio separation/quality and ease of maintenance. Widely used by many mission critical organisations such as National & NATO Armed Forces. Feature robust nylon construction, flexibility & customization to end user specifications, easy hygiene and maintenance and detachable or hard wired downlead.

Airlite 91 Series Headsets for air traffic controllers, available in a variety of technical configurations including Monaural and Binaural versions to meet the exact needs of the end user.

Airlite 95 Series Headsets for air traffic controllers, a new series of headsets designed and built to the specifications of the UK Ministry of Defence. They carry NATO stock reference numbers. 

TC1-Active Monaural and Binaural Headsets for air traffic controllers, ideal for harsh environments or busy corporate call centres where excellent design and durability is required across their business operation.

CLEMENT CLARKE Headset Options:

300-ohm noise cancelling microphone (both clip-in & fixed types)

Electret noise cancelling microphone (clip-in type / slim boom type)

100-ohm Carbon replacement microphone (electret clip-in type)

300 ohm and 600-ohm Magnetic earphone type 4T. Tropicalized and pressure equalized

600 ohm Moving coil (wide band) type, for use with sonar equipment.

ON/OFF, ON/MOMENTARY and ON/OFF/MOMENTARY switching options

Different plug types inc. 62GB-56T14-19PN(044) 19pole connector with arctic grip, XLR & LEMO connector

10 core stranded copper with overall screen cable construction (typical)

CLEMENT CLARKE Headsets are sold on demand. For further information please contact us.

UMA airspeed indicators are fully FAA TSO'd to C2d specifications for installation on certified aircraft. Installable in a fixed wing aircraft with a reciprocating or turboprop engine. Must be installed in a temperature controlled environment form -55 to 85°C, to a max altitude of 25,000 ft. These airspeed indicators are available in different versions, 2-1/4",Single Speed MPH and 3-1/8" single or dual scale (MPH/Knots) versions with an outside/Inside scale: 40-200 MPH/40-170 Knots, housed in a Valox 420 Plastic case and weighting 8.6 oz. They are offered with or without certification. ASI markings are sold separately for each unit at additional cost. Please select the markings option if markings are required. 

JPI FS-450 Fuel Scan is a top choice low price unit for fuel management of an aircraft, offeredin different versions with single transducer available for gravity, pressure and ROTAX engines or with a Flow Scan 201 or 231 transducer and harness for pressurized carb engines.

FALCON GAUGE  Electrical Turn Coordinator is used for displaying the angular rate and sideslip of turning in horizontal flying and turning. The inclinometer indicates the slip angle of the aircraft while in a turn. A power failure flag drops into view whenever the voltage drops below a level for proper operation. The Turn Coordinator incorporates a built-in voltage regulator so it can be used with either 14VDC or 28VDC power system. It is compact in size and light weight eliminating radio interference.

This small, lightweight unlighted turn coordinator is excellent for homebuilt aircraft. Works for 14 Volt or 28 Volt systems. Features, power out warning flag with a 0° Panel. Fits Standard 3-1/8" Cut Out, 3-3/4" long.

SCINTEX complete kit with digital gauge and dual flow meters enabling monitoring of the engine's supply and return lines. It comes with 2 fittings for each flow meter (to be specified at the time of ordering) and clamps. For installation wiring between the flow meters and the display unit is required (not included). This kit is intended for use in vehicles, machinery, generators and boats / marine and other engine applications. The flow meters are precision cut from steel and aluminum and they are highly accurate, repeatable and suitable for use with diesel, biodiesel, unleaded petrol and other fuels. The display unit is a 1.8”, high resolution, sunlight readable, wide viewing angle, LCD colour display with a completely sealed and waterproof display front panel. The gauge enclosure is a common 52mm round size to fit many existing cutouts. Key features include highly accurate with good repeatability displays consumption in Litres per Hour or other units, fuel remaining in up to 2 tanks, connection capabilities to a NMEA enabled RS232 GPS receiver,  one or two fuel flow senders and fuel level senders and a single fuel pressure sender and display. It can be powered by 12V - 36V power supplies. Please refer to the additional information and specifications provided or contact us.