The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

AVIASPORT Oil Pressure indicators (gauges) are designed specifically for ROTAX 912/914 aircraft engines with painted red, green, and yellow gauge markings. are available in two sizes: 52 and 57 mm. They are offered in two unit versions for readings in PSI or Bars. They work with different pressure sensors depending on these installed in ROTAX 912/914 engines: the VDO sensor (Before September 2008) or the 4..20mA sensor (after 2008).

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE  Electrical Turn Coordinator is used for displaying the angular rate and sideslip of turning in horizontal flying and turning. The inclinometer indicates the slip angle of the aircraft while in a turn. A power failure flag drops into view whenever the voltage drops below a level for proper operation. The Turn Coordinator incorporates a built-in voltage regulator so it can be used with either 14VDC or 28VDC power system. It is compact in size and light weight eliminating radio interference.

This small, lightweight unlighted turn coordinator is excellent for homebuilt aircraft. Works for 14 Volt or 28 Volt systems. Features, power out warning flag with a 0° Panel. Fits Standard 3-1/8" Cut Out, 3-3/4" long.

These UMA new manufacture NON TSO'd electric ammeters offer accuracy, rugged construction, and contemporary styling. They are available in different  measurement ranges with a 270° sweep and are suitable for installation in 2-1/4" panel hole diameters. Made in U. S. A. and furnished with shunt.

MITCHELL AIRCRAFT PRODUCTS, Inc. is a well known manufacturer of tachometers, gauges, and instruments the general aviation industry, built under an FAA-approved quality system.

Their product range includes:

Mechanical 3-1/8″ Clockwise, & Counter-Clockwise, 2, 2-1/4″ Mechanical Recording & Electric Lighted Tachometers, 

Electric Gauges (Ammeters, Cylinder Head Temperature, Exhaust Gas Temperature, Fuel Quantity Gauges, Outside Air Temperature, Pressure & Temperature Gauges, and Voltmeters,

Mechanical Pressure &Temperature Gauges

Modular Gauges (Ammeters, Blank, Fuel Quantity,Pressure, Temperature Gauges, and Voltmeters, Modular Gauge Frames. This line of FAA PMA  miniature square engine gauges is ideal for a wide variety of general aviation applications. They measure nearly 1-1/2″  and are stackable. The modular design allows them to be plugged from the front of the panel. The units are internally lighted. Complete standard panels are also available. If individual gauges are ordered, appropriate backplate with pigtail must be ordered to mount and connect the gauge. If more than one gauge are ordered to be mounted together, a special order clustering requires custom backplates.

Sending Units (CHT & EGT Thermocouples, Fuel Quantity & Pressure Senders, 1/8″ & 5/8″ Temperature Senders.

MITCHELL FAA PMA'd D1-211 Series  modular 1-1/2 " fuel quantity square  gauges can be stacked in horizontal and/or vertical rows in any position in the aircraft panel. These  modular gauges are internally lighted and are plug removable from the front of the panel for easy maintenance. Available in different sender resistances for the indication of fuel quantity in the aircraft's left or right fuel tank.

MITCHELL FAA PMA'd D1-211 Series  modular electric 12V (PN D1-211-5074) & 24V (P/N PE-111-4074) fuel quantity gauges are lighted and easily installed in a 2-1/4" panel hole. They feature a 2 year factory warranty.

The gauges and senders must be ordered separately.

For the 12V Fuel Quantity Gauge D1-211-5074 the matching sender is PS-211-8038, 10-180 Ohm. For 24V operation, P/N PE-111-4074  resistors for each instrument must be ordered.

MITCHELL Pressure Senders 80 PSI (PN PS-211-9002) and 150 PSI (PN PS-211-9040) are offered for use with D1-211-6089 and D1-211-6092 FAA PMA Pressure Gauges respectively. Both have 2 terminals (one terminal to be grounded).

MITCHELL EGT Gauge 0-1600 Deg. F, PN D1-211-6101 requires PN PS-211-8162 sender (probe).

The HONEYWELL BENDIX KING® KI 525A HSI is a pictorial navigation indicator used in the KCS-55A compass system which also includes KG-102A Directional Gyro, KMT-112 Magnetic Azimuth Transmitter (flux valve), KA-51B Slaving Control & Compensator Unit and optionally KA 52/KA 57 Autopilot Adapters. It was a popular avionics upgrade for light aircraft until the advent of the Sandell electronic HSI and, more recently, glass-cockpit systems from Garmin, Aspen and others. This indicator combines the display functions of both the standard directional gyro and the course deviation indicator offering the pilot a single view of the horizontal navigation situation. It greatly simplifies course orientation, interception, and tracking resulting in less work from the pilot. Internally lighted, the KI 525A operates at 14 or 28 VDC.

The HONEYWELL BENDIX KING® KI 525A HSI is available in different models to serve application requirements:

- with bootstrap heading synchro to provide source of slaved heading information for any device, such as an autopilot

- with glideslope needle damping for use in high vibration environments such as helicopter

- capable of operating at either 30Hz or 400Hz

- capable of operating at 14 or 28VDC and 5 volt operation

Like other KCS 55A compass system components, the  KI 525A indicator can be furnished in NEW condition or as USED in Serviceable or Overhauled conditions indicated respectively by the letters "SV" and "OH" in the product reference numbers (SKU and  accompanied by the relevant certification (e.g. yellow tag, 8130-3 form). They are also offered as exchanges / trade-ins  for returned customer owned units indicated by the letter "EX" in the SKU.  In the case of an exchange/trade-in option of a customer unit, the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders when our co-operating supplier verifies that the unit is in a reasonable, repairable condition. It is recommended that this option is selected by our customers mainly for upgrades and only in cases when their units are functioning properly at the time removal from the aircraft. In cases when customer units are found by our supplier to be non-repairable, the core deposit shall not be refunded and shipping charges shall apply if customers wish the return of these units to them. Please refer to the Product Description section for technical specifications and additional information.

UNITED INSTRUMENTS 8000/8100 Series Air Speed Indicators (ASI) are FAA TSO'd for installation on certified aircraft. 

The 8000 Series ASI indicate the speed relative to the air at sea level altitude. The 8100 Series True ASI indicate the speed relative to the air at sea level or the desired altitude.The indicator has an inner dial to indicate true airspeed. The altitude and temperature are the conversion factors used to obtain this reading with the use of a setting knob. 

When properly connected to an airspeed tube, the 8000/8100 Series airspeed indicators measure the differential pressure developed between the pitot and static opening. 

The pressure is indicated in units of airspeed mph (M) and/or knots (K).

Product Specifications:

Certification: FAA TSO C2b 

Case Configuration: MS33638, 3 inch

Typical Weight: 0.7 pounds

Static, Pitot Pressure Connector:   1/8-27 ANPT

Installation: Removable spring nuts and #6-32 screws

Lighting: Available upon request. All lighted instruments require a light tray sold separately. Please refer to offered SIGMA-TEK 5000B 14V or 28V Light Tray.

This 2-1/4 inch flap indicator uses a resistance potentiometer as a flap position sensor. Transmitter is required. Wt: 9.8 oz.

The RCA 22 Series of vacuum artificial horizon are controlled by air driven precision gyros to present the pilot with pitch and roll information. The attractive color scheme of blue sky and brown ground presents a realistic spherical display of flight. Unless otherwise indicated all instruments have a  "standard" display (dark blue/brown display with fixed pointer) and are unlighted.

All R.C. Allen vacuum gyros run off of 4.5" Hg, erect time is 3 min. The instrument fits in a standard 3 1/8 panel cutout. A ¼ -18 NPTF nylon tube slip fitting is recommended for vacuum hose installation. A 1/8 – 27 NPTF nylon tube slip fitting is recommended for vacuum gauge installation. 

Dimensions: H: 3-3/8", W: 3-3/8", L: 6"

Weight: 2.75 lbs.

Certification: Meet or exceed all requirements of FAA TSO C4c and Aeronautical Standard AS396B.

Made in the USA

NOTE: The RC Allen RCA22-7 Vacuum Horizon Gyro can be an alternate device for Cessna Gyro Horizon C661076-0101.

UMA airspeed indicators are fully FAA TSO'd to C2d specifications for installation on certified aircraft. Installable in a fixed wing aircraft with a reciprocating or turboprop engine. Must be installed in a temperature controlled environment form -55 to 85°C, to a max altitude of 25,000 ft. These airspeed indicators are available in different versions, 2-1/4",Single Speed MPH and 3-1/8" single or dual scale (MPH/Knots) versions with an outside/Inside scale: 40-200 MPH/40-170 Knots, housed in a Valox 420 Plastic case and weighting 8.6 oz. They are offered with or without certification. ASI markings are sold separately for each unit at additional cost. Please select the markings option if markings are required. 

UMA line of precision electronic pressure senders feature precision, solid state sensors and circuitry to give unequalled performance and are designed for rugged use in just about any environment.  They are offered in TSO'd and Non TSO'd models and gauge, differential and absolute types. UMA TSO'd electronic pressure senders are the most economical TSO’d units on the market. They are compatible with avgas, jet fuel, engine oil and many other fluids. Because they have internal voltage regulation, they are compatible with indicating instruments that do not have precision output voltages. Units for fuel and oil pressure are certified under TSO C47. Units for manifold pressure are under TSO C45a. For additional information please refer to the attached documentation.

The FAA TSO'd RCA26AK (14V) and 26BK (28V) series of electric attitude indicators (artificial horizons) by KELLY MFG (RC ALLEN) are known for their dependability and ruggedness. They incorporate tremendous advances in presentation, precision, and reliability.With a proven track record for dependability and ruggedness, the attractive new extended color schemes and ultra-precise spherical presentation (eliminating old parallax problems) they set a new standard for safety.These gyros provide a more accurate IFR reference for the beginning instrument pilot or a Cat II captain. A new three phase motor/inverter is designed into the gyro enabling it to operate at lower temperatures which extends to useful life. The instruments employ a new, high precision air erection system which provide erection torque for maintaining a proper vertical alignment reference. The erection air is supplied by a turbine pump which is integrally coupled with the gyro motor. Through maximum utilization of unitized construction the design is free of resonant frequencies below 100 HZ and thus cannot respond to low frequency disturbances which can cause dither and premature wear out of the unit. The display portion of the instruments has a directly coupled roll movement, and a pitch movement mechanism identical to that of the field proven vacuum gyros produced by R.C.Allen since 1966. A "pull to cage" spring type force limited mechanism assures immediate alignment and stability whenever power has been applied to the gyro, a feature non-existent on vacuum driven gyros. These artificial horizons have a hybrid inverter which converts the aircraft DC power to the required voltage and frequency for motor operation. All units have a pull cage knob and a power failure flag that drops into view whenever the supply voltage is lost or when the voltage has dropped below a level of acceptable for proper operation of the gyro. Slip indicator can be added to satisfy FAA AC91-75 upon request. Available in 14V or 28V voltage versions with fixed or movable pointer, lighted or unlighted, power failure flag, panel tilt and optional inclinometer. Mating connector MS3116E8-4S and panel screws are now included with each new instrument at no extra charge.

Dimensions: 3.38"W x 3.38"H x 8.14"L

Weight: 2.3 lbs.

HONEYWELL BENDIX KING® KA 51B is a slave meter used in the KCS 55A compass system. Displays slaving error between the KMT 112 flux valve and KI 525A pictorial navigation indicator by means of small meter movement. 

KANARDIA INDU Series G-Meter gauges form part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature a LCD display with possibility to personalise the displays and scales. They are offered as standalone (master) or as slave gauges. Slave versions require some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the bus. These G-Meter gauges  are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15").

The FLYdat has been specially developed by TL ELEKTRONIC for BRP-ROTAX® Aircraft Engines for indicating and storing of engine operation data. The unit  is furnished with 8 sensor input ports, which can be occupied variably according to engine type.

The operating data is permanently compared with the engine specific operating limit. If the signalled operating data exceeds the stored operating limit, the FLYdat will warn the pilot. In addition all the input ports are equipped with a maximum alarm, responding when picked-up value is equal or above the stored limit. The FLYdat keeps the pilot informed on the following actual readings. Besides the topical data, the FLYdat shows also the hours of operation.

•  Engine speed

•  Cylinder head temperature (CHT)

•  Exhaust gas temperature (EGT)

•  Ambient air temperature (not on engines 912 / 914)

•  Temperature of cooling water (only on engines 582 UL, 618 UL)

•  Oil temperature and oil pressure (only on engines 912 / 914)

The TL ELEKTRONIC FLYdat is supplied with a standard configuration. With the standard configuration all trigger levels for warning- and alarm system are set to the maximum of the measuring range.

Configuration is available for the following BRP-ROTAX® engine types: 447 UL SCDI, 503 UL DCDI, 582 UL DCDI, 618 UL DCDI, 912 DCDI series, 914 DCDI series, Standard

By configuration of the TL ELEKTRONIC FLYdat, the engine type, engine number, hour of operation, temperature unit and the respective engine limits are programmed.

The TL ELEKTRONIC FLYdat unit and parts are no longer offered as ROTAX Part Numbers. These part numbers are provided for reference only.  In addition, aircraft engine  parts are subject to changes from time to time. Some parts may be no longer available or replaced by others with different part numbers. Listed engine parts do not imply their current availability or suitability for your engine application. Always consult the most recent Illustrated Part Catalogs (IPCs) or other documentation available from the engine manufacturer for the correct part number before ordering.

The HONEYWELL BENDIX KING® KMT 112 is a Magnetic Azimuth Transmitter (aka Flux Detector or  Valve) which senses the direction of the earth’s magnetic field and continuously transmits this information through the slaving circuitry to a directional gyro (such as the HONEYWELL BENDIX KING® KG 102A or KSG 105 slaved directional gyros). This sensor is mounted remotely, usually in a wingtip, to eliminate the possibility of magnetic interference. The KMT 112 is typically used in HONEYWELL BENDIX KING® KCS 55A and KCS 305 compass systems. The KMT-112 flux valve is a sealed unit and cannot be serviced or have parts replaced. The unit must be replaced when/if it fails.

Like other KCS 55A compass system components, the  KMT 112 transmitter can be furnished in NEW condition or as USED in Serviceable or Overhauled conditions indicated respectively by the letters "SV" and "OH" in the product reference numbers (SKU and  accompanied by the relevant certification (e.g. yellow tag, 8130-3 form). They are also offered as exchanges / trade-ins  for returned customer owned units indicated by the letter "EX" in the SKU.  In the case of an exchange/trade-in option of a customer unit, the  full selling price of the ordered unit is charged and the core credit is refunded or credited towards future orders when our co-operating supplier verifies that the unit is in a reasonable, repairable condition. It is recommended that this option is selected by our customers mainly for upgrades and only in cases when their units are functioning properly at the time removal from the aircraft. In cases when customer units are found by our supplier to be non-repairable, the core deposit shall not be refunded and shipping charges shall apply if customers wish the return of these units to them. 

Installation parts and manuals are sold separately. 

For additional information and technical specifications please refer to the Product Desscription section, the product presentation of the HONEYWELL BENDIX KING® KCS 55A compass system or contact us.

KANARDIA INDU Combo IAS/Altitude/Vertical Speed Indicators are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters.They feature an LCD display with possibility to personalise scales and LCD displays. They are offered as standalone (master) or as slave gauges. Slave versions require some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the bus. KANARDIA INDU Combo IAS/Altitude/VSI gauges are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15"). Arc colors need to be specified  at the time of order.

TSO'd Electronic Fuel Quantity gauges from UMA INSTRUMENTS (indicated by the letter "T" in the PN) are offered in 1-1/4 in. and 2-1/4 in. sizes for installation in respective panel hole diameters and mounted with (4) 6-32 screws. Smaller 1-1/4 in. instruments can be cluster mounted as close as 11/2” centers utilizing panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on black analog dials with white easy to read markings indicating empty to full fuel level. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Available in different versions based on their sender type and range. UMA sensors are sold separately.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE G-Meters (Accelerometers) measure G forces acting on the airframe during turbulent or aerobatic maneuvers. One pointer provides a continuous reading, the other two indicate maximum positive and negative loads. FALCON G-Meter models are mechanical and offer precision, accuracy, and durability. They are also easy to operate. No wiring necessary. The units come with the locking knob set to the locked position.  Do not press the reset button until after moving the locking knob to the unlocked position.

FALCON GAUGE GM510-2 G-Meter is a standalone 57 mm (2 1/4") unit which fits a standard 2 1/4" instrument cutout. 

Product Features and Specifications:

• G-Meter, -5 to +10 g

• Operation Temperature: -55º to +60°C

• Dimensions: 61 mm (2 1/4") x 61 mm x 108 mm (3.5")

• Complies with Standard : MIL-A-5885C

Please refer to the supplied documentation for additional information.

Note: FALCON GAUGE GM510-2 G-Meter is currently not available. Availability in NEW condition depends on existing stocks and is limited.

SCINTEX complete kit with digital gauge and dual flow meters enabling monitoring of the engine's supply and return lines. It comes with 2 fittings for each flow meter (to be specified at the time of ordering) and clamps. For installation wiring between the flow meters and the display unit is required (not included). This kit is intended for use in vehicles, machinery, generators and boats / marine and other engine applications. The flow meters are precision cut from steel and aluminum and they are highly accurate, repeatable and suitable for use with diesel, biodiesel, unleaded petrol and other fuels. The display unit is a 1.8”, high resolution, sunlight readable, wide viewing angle, LCD colour display with a completely sealed and waterproof display front panel. The gauge enclosure is a common 52mm round size to fit many existing cutouts. Key features include highly accurate with good repeatability displays consumption in Litres per Hour or other units, fuel remaining in up to 2 tanks, connection capabilities to a NMEA enabled RS232 GPS receiver,  one or two fuel flow senders and fuel level senders and a single fuel pressure sender and display. It can be powered by 12V - 36V power supplies. Please refer to the additional information and specifications provided or contact us.