MITCHELL AIRCRAFT PRODUCTS, Inc. is a well known manufacturer of tachometers, gauges, and instruments the general aviation industry, built under an FAA-approved quality system.

Their product range includes:

Mechanical 3-1/8″ Clockwise, & Counter-Clockwise, 2, 2-1/4″ Mechanical Recording & Electric Lighted Tachometers, 

Electric Gauges (Ammeters, Cylinder Head Temperature, Exhaust Gas Temperature, Fuel Quantity Gauges, Outside Air Temperature, Pressure & Temperature Gauges, and Voltmeters,

Mechanical Pressure &Temperature Gauges

Modular Gauges (Ammeters, Blank, Fuel Quantity,Pressure, Temperature Gauges, and Voltmeters, Modular Gauge Frames. This line of FAA PMA  miniature square engine gauges is ideal for a wide variety of general aviation applications. They measure nearly 1-1/2″  and are stackable. The modular design allows them to be plugged from the front of the panel. The units are internally lighted. Complete standard panels are also available. If individual gauges are ordered, appropriate backplate with pigtail must be ordered to mount and connect the gauge. If more than one gauge are ordered to be mounted together, a special order clustering requires custom backplates.

Sending Units (CHT & EGT Thermocouples, Fuel Quantity & Pressure Senders, 1/8″ & 5/8″ Temperature Senders.

MITCHELL FAA PMA'd D1-211 Series  modular 1-1/2 " fuel quantity square  gauges can be stacked in horizontal and/or vertical rows in any position in the aircraft panel. These  modular gauges are internally lighted and are plug removable from the front of the panel for easy maintenance. Available in different sender resistances for the indication of fuel quantity in the aircraft's left or right fuel tank.

MITCHELL FAA PMA'd D1-211 Series  modular electric 12V (PN D1-211-5074) & 24V (P/N PE-111-4074) fuel quantity gauges are lighted and easily installed in a 2-1/4" panel hole. They feature a 2 year factory warranty.

The gauges and senders must be ordered separately.

For the 12V Fuel Quantity Gauge D1-211-5074 the matching sender is PS-211-8038, 10-180 Ohm. For 24V operation, P/N PE-111-4074  resistors for each instrument must be ordered.

MITCHELL Pressure Senders 80 PSI (PN PS-211-9002) and 150 PSI (PN PS-211-9040) are offered for use with D1-211-6089 and D1-211-6092 FAA PMA Pressure Gauges respectively. Both have 2 terminals (one terminal to be grounded).

MITCHELL EGT Gauge 0-1600 Deg. F, PN D1-211-6101 requires PN PS-211-8162 sender (probe).

OMRON M2C Series cylindrical indicators have the basic design as the A3C pushbutton switches. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier and provide good illumination with even surface brightness. These indicators are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. UL (E41515) and CSA (LR45258) approved. Please consult the supplied documentation for ordering.

OMRON A16 series pushbutton 16-dia. cylindrical body switches are detachable switches. The same contacts can be used for both standard loads and microloads. Their miniature design of 28.5 mm makes these switches the smallest class in the industry. Easy-to-wire terminal arrangement. Certified for EN 60947-5-1. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

OMRON A3C series cylindrical pushbutton switches have the basic design as the M2C Series cylindrical indicators. They provide a high-intensity uniform surface lighting while they have a miniature size with excellent feeling of operation. They have a cylindrical 20-mmX12-dia. body making panel cutouts easier. These switches are offered in lighted and non lighted versions, different colors, display shapes, with LED or incandescent lamps and different socket units. Please consult the attached documentation for ordering.

RS FLIGHT SYSTEMS develops and manufactures avionics for general aviation and flight test equipment. RS FLIGHT SYSTEMS range of avionics includes Engine Management Units for Rotax 912 iS / 915 iS engines, engine panels, automatic propeller speed control unit (SCU), and SCU front panel, iS Data Recorder for Rotax iS engines (912iS / 915iS / 916iS), control panels, portable test bench for independent drive of BRP Rotax iS engines, real-time wind indication system, Fly by wire control sticks, CANaerospace based flight test instrumentation  and more. 

The RS FLIGHT SYSTEMS 2nd generation ROTAX® 912iS/915iS Engine Management Units (EMU) include 2 cockpit mounted engine monitoring, data logging & propeller control devices, EMU 912iS evo & EMU 9xiS. Both feature the same hardware, software and functionality but differ in dimensions and weight. They integrate seamlessly into the Rotax 912iS/915iS engine wiring harness, providing indications of all available engine parameters, engine status, ECU faults and additional sensor inputs. Suitable for 14 V and 28 V aircraft electrical systems with minimum installation effort. Configurable for use with different unit systems. Additional features: sunlight-readable backlit display, dual optically isolated CANaerospace data bus interfaces for retained redundancy, continuous monitoring and health checking of both ECU display buses, georeferenced data recording of all parameters at 10 Hz over up to 2,000 hours, simple data transfer & software update via an integrated memory card slot, sophisticated visualization & processing tool for recorded data, Google Earth file export of recorded data inc. GNSS and engine data. Wiring Harness Kit (incl. power supply wires) is also available (sold separately). A separate module (sold separately) provides connection to 912/914 carburetor Rotax engines.

For more information on RS FLIGHT SYSTEMS products please consult the Product Description section and the supplied documentation.

Sigma-Tek 5000B Series Attitude Indicators (Artificial Horizons) are air-driven gyros that have a pictorial horizon mask and fixed airplane. The mask moves to indicate climb, dive, and bank. Bank and pitch attitudes are displayed so that the pilot’s sensing of the gyro indication is the same as the interpretation of the relation between the wings of the aircraft and the natural horizon during visual flight. These instruments are FAA certified (TSO-C4c), and can be used to replace the aircraft’s turn coordinator when equipped with an inclinometer. Different versions available mainly based on the layout, dispay colors, warning flag and lighting capabilities. Lighted indicators do not include lamp trays which are sold separately based on the aircraft voltage (14V or 28V).

The SIRS "Navigator" magnetic compass delivers extremely accurate readings due to its fully integrated, 4 magnet correction facility.  It has the same features as the "Pegasus", but is mounted with a fully adjustable bracket that allows attachment to a variety of positions including the glare-shield or the windshield. This allows the compass to be located away from magnetic influences. Available in different versions for Northern or Southern hemisphere, unlighted  or lighted 12/28V and has a 3-year warranty. Size: 203/8" H x 2-1/4" W. Product accessories such as installation kit, GS1 glareshield mount, SIRS MF1 short foot bracket and SIRS compass correction key are also available and sold separately.

RAY ALLEN (RAC) R2S Rocker Switch provides a very positive snap action in 2 directions and returns to a center off position. It was designed specifically for Ray Allen trim systems. It is wired to connect both power leads to ground when the rocker is released. This eliminates motor coasting and allows very precise trimming. The RS2 switch is rated at 1amp. The faceplate measures 1.75" (44mm) x 1.0" (25mm) x 1.47" (37mm) deep. Self adhesive labels are not included. Sold separately.

The RAY ALLEN (RAC) RP4 LED position indicator is designed to be installed in the cockpit providing an indication of the servo output shaft position. This indicator supercedes and it is a direct replacement for previous RAC RP3. The RP4 indicator uses ten LED lights to show the position of a actuator output shaft (or position sensor arm). There are also two amber colored LED's, one on each end of the indicator scale, to act as a reference for the green indicator light, especially in dark conditions. The 10 LEDs are the brightest available for superior visibility in sunlight, but can be dimmed for night flight. It can be installed horizontally or vertically. 

The RAC RP4 position indicator is panel mounted using a faceplate and two countersunk, 2-56 x 7/16" screws (two spare finishing screws are included). The distance between the screw holes is identical to the older Ray Allen RP3 LED indicator. Although the faceplate dimensions are identical between the RP3 and RP4 indicators, the panel cutout size is slightly different between the RP3 and RP4. If you are replacing and older unit with a new RP4, you will only need to increase the size of your panel hole. The RP4 faceplate will cover the older RP3 panel hole.The RP4 faceplate measures 1.75"(45 mm) X .75"(19 mm) and it is 1.6"(41 mm) in depth. It is now the standard position indicator included in Ray Allen trim systems, or can be purchased separately for special applications such as a cowl or wing flap indicator.

The RP4 includes a RP4-L1 label (featuring Elev1, Elev2, Ail, Rudder, Flaps). A RP4-L2 label (featuring Cowl Flaps, < >, on/off) is also available and is sold separately. 

NOTE: Labels can only be ordered together with . In ordering these high quality labels please be advised that rocker switches and needle indicators require a large label, LED indicators use a small label. Can be only included in orders of respective RP4 position indicator(s) (not separately).

SWIFT AIRCRAFT manufactures Swift two-seater low wing composite aircraft with striking elliptical wings and double curvature surfaces. Comfortable, safe and environmentally sound they are designed and manufactured entirely in the UK, and available globally,

The company also manufactures Swift aircraft gauges specializing in precision-engineered gauges, including Exhaust Gas Temperature (EGT) and Cylinder Head Temperature (CHT) gauges, commonly used in aviation.

The FLYdat Engine Management Unit (EMU) has been specially developed by TL ELEKTRONIC for BRP-ROTAX® aircraft engines for storing & indicating engine operating data including Engine Speed, Cylinder Head temperature (CHT), Exhaust Gas Temperature (EGT), Ambient Air Temperature (not on 912 / 914  engines), Cooling Water Temperature of  (only on 582 UL, 618 UL engines), Oil Temperature & Pressure (only on 912 / 914 engines) & hours of operation. It featured  8 sensor input ports, variably occupied according to engine type. In addition, all the input ports were equipped with an alarm, responding when the signalled engine operating value was equal or above the respective stored operating limit. The FLYdat could be used with BRP-ROTAX® 447 UL SCDI, 503 UL DCDI, 582 UL DCDI, 618 UL DCDI, 912/914 DCDI series engines.The engine type, engine number, hour of operation, temperature unit and the respective engine limits could be programmed.

The FLYdat is no longer a listed TL ELEKTRONIC product. It can be replaced by its direct successor, TL ELEKTRONIC Integra TL-6724 Digital EMS, developed in cooperation with BRP-ROTAX®, which forms part of Integra family of Multifunctional Flight Instrument (EFIS) &  Engine Monitoring Systems (EMS) for Light Aircraft. FLYdat units in NEW SURPLUS & USED Conditions, and related parts, may still be supplied depending on existing inventories. Other Aircraft Engine Monitoring Systems (EMS) from different manufacturers (listed separately) are also offered and they could also be considered as alternatives. 

The Integra TL-6724 multifunctional EMS integrates all primary engine instruments (i.e. Tachometer, Manifold Pressure Indicator, EGT, CHT, Oil and Water Temperature Indicator, Fuel Quantity, Fuel Pressure and Fuel Flow Indicator, Voltmeter, Ammeter, Timer, IAT, OAT etc.) and also propeller control for Constant Speed and Choke Control. Designed for use with all light aircraft engines. Its EFIS counterpart, TL-6524, integrates all primary engine instruments and also includes navigation systems (HSI, CDI with connection to the popular Garmin SL-30 and many others) and worldwide 3-D terrain maps. For a total glass cockpit solution, TL-6624 EFIS & EMS Integra integrates all the features of TL-6524 and TL-6724, while TL-6824 Remote Integra Display is also offered displaying all flight and engine data measured by TL-6524, TL-6624 and TL-6724. 

Integra glass cockpit instruments include advanced features such as wide viewing angles, brilliant color and direct sunlight readability,  comfortable, user-friendly control of functions,backlight of buttons & sensors for automatic dimming,display of analogue instruments,downloadable values of engine functions through USB port,constant monitoring of all measured engine operating data,direct headphone voice warnings,internal back up battery etc.

Non-certified INTEGRA devices should not be installed in a certified aircraft. 

For additional information contact us.

UMA airspeed indicators are fully FAA TSO'd to C2d specifications for installation on certified aircraft. Installable in a fixed wing aircraft with a reciprocating or turboprop engine. Must be installed in a temperature controlled environment form -55 to 85°C, to a max altitude of 25,000 ft. These airspeed indicators are available in different versions, 2-1/4",Single Speed MPH and 3-1/8" single or dual scale (MPH/Knots) versions with an outside/Inside scale: 40-200 MPH/40-170 Knots, housed in a Valox 420 Plastic case and weighting 8.6 oz. They are offered with or without certification. ASI markings are sold separately for each unit at additional cost. Please select the markings option if markings are required. 

UMA NON TSO'd mechanical manifold pressure gauges (MPGs) are offered in two series, the conventional 2-1/4" manifold lightweight  gauges with a slim design and a single diaphragm and the newer 3-1/8" and 2-1/4" gauges which incorporate a dual diaphragm design improving the longevity and reliability of the instrument. Standard markings are black and white while optional color markings can be ordered. Cases are from cast aluminum or Valox 420 plastic depending on model selected.

This 2-1/4 inch flap indicator uses a resistance potentiometer as a flap position sensor. Transmitter is required. Wt: 9.8 oz.

1-1/4 inch TSO'd Electronic Fuel Pressure Gauges from UMA INSTRUMENTS. Black & White dial marking. Available in different pressure (PSI) ranges. Case: Aluminum. Weight: 4.0 oz. UMA sensors are sold separately.

TSO'd Electronic Fuel Quantity gauges from UMA INSTRUMENTS (indicated by the letter "T" in the PN) are offered in 1-1/4 in. and 2-1/4 in. sizes for installation in respective panel hole diameters and mounted with (4) 6-32 screws. Smaller 1-1/4 in. instruments can be cluster mounted as close as 11/2” centers utilizing panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on black analog dials with white easy to read markings indicating empty to full fuel level. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Available in different versions based on their sender type and range. UMA sensors are sold separately.

TSO'd Electronic Fuel Quantity gauges from UMA INSTRUMENTS (indicated by the letter "T" in the PN) are offered in 1-1/4 in. and 2-1/4 in. sizes for installation in respective panel hole diameters and mounted with (4) 6-32 screws. Smaller 1-1/4 in. instruments can be cluster mounted as close as 11/2” centers utilizing panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on black analog dials with white easy to read markings indicating empty to full fuel level. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Available in different versions based on their sender type and range. UMA sensors are sold separately.

UMA line of precision electronic pressure senders feature precision, solid state sensors and circuitry to give unequalled performance and are designed for rugged use in just about any environment.  They are offered in TSO'd and Non TSO'd models and gauge, differential and absolute types. UMA TSO'd electronic pressure senders are the most economical TSO’d units on the market. They are compatible with avgas, jet fuel, engine oil and many other fluids. Because they have internal voltage regulation, they are compatible with indicating instruments that do not have precision output voltages. Units for fuel and oil pressure are certified under TSO C47. Units for manifold pressure are under TSO C45a. For additional information please refer to the attached documentation.

UMA  2-1/4" electric tachometers with their high resolution and easy to read displays were designed to offer aviation styling and performance for all types of aircraft. The analog model has a 270° sweep which provides great resolution in both the 3500 and 7000 ranges. The digital model has a bright LED display. Separate power source required. Installation is simple and instructions are included. They can replace mechanical tachometers in Lycoming/Continental engines.

Current: 80 milliamps ­ Size: 2.25" round x 2.75"deep.

UMA NON TSO'd Electronic Amp Meter Gauges (Ammeters) are available in different series for different measurement ranges and installation in different panel hole diameters. 1-1/4" series allow utilization of panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on analog dials with easy to read markings. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Each gauge can be placed in a 1-1/4” diameter hole and mounted behind the panel with (4) 6-32 screws. They can be cluster mounted as close as 11/2” centers. Also available as new manufacture electric with 2-1/4" dia. Other UMA series of electronic ammeters include 2-1/4" series with moving coil and 85° Sweep and 2-1/4" Dual Amp/ 0-30 volt meters with moving coil  and 85° sweep.

NOTES:

These ammeters come with the suitable shunt. Different shunts are used depending on ammeter part number.

All Part Numbers beginning with the letter "T" are TSO'd for Certified Aircraft.

These UMA new manufacture NON TSO'd electric ammeters offer accuracy, rugged construction, and contemporary styling. They are available in different  measurement ranges with a 270° sweep and are suitable for installation in 2-1/4" panel hole diameters. Made in U. S. A. and furnished with shunt.

UMA Electronic Hydraulic Pressure Gauges are offered in TSO'd and Non TSO'd models and 1-1/4"  or 2-1/4" diameters to fit respective aircraft panel openings. They are housed in aluminium or Valox 420 plastic cases (depending on the model) and connect to  precision, high pressure transducers which mount directly to the aircraft's hydraulic system. Standard markings are black and white. Recommended for new design projects and applications. 

Note: Pressure Transducers (Senders) ARE NOT INCLUDED in the prices of the pressure gauges. They are sold separately and are not TSO'd.

UMA Non TSO'd airspeed indicators are offered in 2-1/4" and 3-1/8" Single (MPH) and Dual Range (MPH/Knots) versions for installation on experimental aircraft only. They are housed in Valox 420 plastic cases and weigh 8.6 oz. . Depending on the selected indicator, ranges are in MPH, Knots or kilometers. Some inicators are also offered as certified (FAA TSO'd) units. Standard dial markings are black and white. Optional custom range markings and optional internal lighting(*) are also offered upon request at additional cost. Please indicate the markings option (if markings are required) and lighting option at the time of ordering. 

(*) Note: An inverter is required for the Internal Lighting Option.

UMA Non FAA Approved standard 2-1/4" and 3-1/8" altimeters are high quality, simple type (single pointer) with 2 revolution dial, designed to meet the needs of the low cost non-IFR users. Both altimeters utilize a knob adjustable barometric in. Hg scale, viewed through a Kollsman Window.

Product Specifications:

Case: Aluminum Casting

Weight: 10.6 oz. 

Case: Valox 420 Plastic

Weight: 5.0 oz.

Not FAA Approved

The Vertical Speed Indicators (VSI)  provide an accurate indication of rate of change of altitude. 

UMA 8-210 Series Non TSO'd VSIs are offered in 2-1/4" and 3-1/8" versions. They are temperature compensated precision instruments provided with a zero adjustment screw on the face of the case in the seven o' clock position. They are powered by the aircraft static system. They are available in different ranges such as 0-2000 FT, 0-3000 FT, 0-4000 FT, or 0-6000 FT and different dial legends: Vertical Speed, Climb, Rate of Change, Cabin Climb.

3 1/8″ and  2 1/4″ VSIs are available with internal electroluminescent lighting in 3 colors: blue-white, aviation green and red. External DC-AC inverter required.  Weight 3 1/8″: 8.8 Oz - Weight: 2 1/4″ 7.4 Oz.

Case: Valox 420 Plastic

AN5771-4A style 2-1/4 inch hydraulic pressure gauge with steel case connecting directly to the aircraft's hydraulic system. Fits in a 2-1/4" dia. panel opening and has a threaded 1/4"  connection for a fitting. Range: 0-2000 PSI. Only available in Overhauled Condition. Certified with fresh Matte-white dial. Yellow-tagged. Limited availability.

For new design projects and applications please refer to the presentations of alternative TSO'd and non TSO'd electronic hydraulic pressure gauges and pressure senders offered. 

Pressure Transducers (Senders) whenever required, ARE NOT INCLUDED in the prices of hydraulic pressure gauges. They are sold separately.

Note: A yellow tag is similar to a FAA 8130-3 Serviceable tag both denoting the "Serviceable" condition of the product i.e. it has been  repaired as needed, tested according to the manufacturer's procedure, meet the manufacturer's performance specifications and ready to return to service. Yellow tags are issued and widely accepted in North America while a FAA 8130-3 Serviceable tag is is accepted worldwide. The acceptance of yellow tags by national Civil Aviation Authorities should be checked by potential buyers prior to ordering.

Designed to help the pilot determine altitude by measuring existing atmospheric pressure, the altimeter translates the measurement into “height above sea level.” This is indicated on the dial of the instrument in feet, which requires setting the barometric pressure in the Kollsman window.

UNITED INSTRUMENTS 5934 series are FAA TSO'd 3"/ 3-pointer altimeters, intended for use with most single engine, turbo/piston prop aircraft. They are offered in 5934 and 5934A models with respective maximum calibrated ranges  of -1.000 to 20.000 feet and  -1.000 to 35.000 feet respectively. All lighted instruments require a light tray sold separately.

Product Features:

Affordable, certified 3-1/8" case for half the cost of existing systems

United series 5934

All units approved to FAA TSO (C10b,C2b and C4c)

Anti-reflective glass enhances visibility and reduces pilot fatigue

Altimeter available with right-hand or left hand knob 20,000 or 35,000 ft. Hg or Mb

All instruments are made in the USA

One year limited warranty

Product Specifications:

Typical Weight: 13 oz

Number of Pointers: 3

Barometric Setting: 28.1 to 31.0 in HG / 946 to 1050 mb

Calibrated Ranges: -1,000 to +20,000 or +35,000 feet

Static Pressure Connection: 1/8-27 ANPT

Installation: Removable Spring Nuts and screws

For additional information please consult the supplied documentation.

UNITED INSTRUMENTS 8000/8100 Series Air Speed Indicators (ASI) are FAA TSO'd for installation on certified aircraft. 

The 8000 Series ASI indicate the speed relative to the air at sea level altitude. The 8100 Series True ASI indicate the speed relative to the air at sea level or the desired altitude.The indicator has an inner dial to indicate true airspeed. The altitude and temperature are the conversion factors used to obtain this reading with the use of a setting knob. 

When properly connected to an airspeed tube, the 8000/8100 Series airspeed indicators measure the differential pressure developed between the pitot and static opening. 

The pressure is indicated in units of airspeed mph (M) and/or knots (K).

Product Specifications:

Certification: FAA TSO C2b 

Case Configuration: MS33638, 3 inch

Typical Weight: 0.7 pounds

Static, Pitot Pressure Connector:   1/8-27 ANPT

Installation: Removable spring nuts and #6-32 screws

Lighting: Available upon request. All lighted instruments require a light tray sold separately. Please refer to offered SIGMA-TEK 5000B 14V or 28V Light Tray.

The vertical speed indicator is a precision instrument which provides an accurate indication of rate of change of altitude. UNITED INSTRUMENTS TSO'd (TSO-C8b) 7000 Series vertical speed indicators (VSI) offer several configurations and have been selected as standard equipment by aircraft manufacturers worldwide for use in most production aircraft.. They are temperature compensated and provided with a zero adjustment screw on the face of the case in the seven oclock position. Power: Static system. Size: 3-1/8" x 3-1/8" x 4", Wt. 0.7 lb. Available in unlighted and lighted versions.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality.

FALCON GAUGE Non Certified Airspeed Indicators have been one of the most chosen flight instruments by fixed wing airplanes, helicopters and ultralights. The great advantages of these gauges are excellent slow speed characteristics, very progressive increments, a variety of ranges, light weight, short length, and affordable price. FALCON GAUGE Airspeed Indicators ranging up to 80 MPH, 100 MPH, 120 MPH and 150 MPH make for excellent MPH increments for helicopters and ultralight aircraft. All FALCON GAUGE Airspeed Indicators are housed in an aluminum case and consist of all metal parts. They come in 2-1/4" and 3-1/8" sizes. Available ranges: MPH, Knots, KPH; single range or dual range readings. Optional: Custom color range markings can be special ordered. For additional information please refer to the supplied documentation or contact us.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE True Airspeed Indicators have been one of the most chosen flight instruments by kit plane builders and pilots. There are many great advantages: excellent slow speed characteristics; very progressive increments; variety of ranges; light weight; short length; affordable price; high precision and reliability. Falcon Gauge True Airspeed Indicators have sub-dials and windows and are housed in an aluminum case and all parts made from metal.  The Pilot can set the dial to coincide the outside temperature with the flight altitude for immediate reference. 

Offered with a single range reading or dual range readings, with MPH, Knots or KPH available ranges, a 3-1/8" size,  a short 2.2" length, optional internal lighting 14V DC or 28V DC and custom color range markings which can be special ordered, these indicators serve the needs of experimental aircraft cockpits. 

FALCON GAUGE Magnetic Compasses are non certified  2" compasses available in liquid (MCDN) and non-liquid (dry) types (MCVC). The Liquid Type compasses provide an accurate reading at a low cost. They are fluid damped and incorporate a thermal expansion chamber and compensating magnet. Available in Panel or Pedestal Mount versions with or without lighting. Different models available: MCDN-2, MCDS-2, MCDN-2L, MCDS-2L. They can be ordered for Northern or Southern Hemisphere.

These compasses are very similar to the Airpath C2300 & C2400 style compasses, but are priced more economically.

The FALCON GAUGE Vertical Card Compasses are of a non-liquid type.  They are designed with a different concept which eliminates the disadvantages experienced with a liquid compass, namely leaking and back and forth motion of the compass card.  These compasses look like directional gyros and offer superior visibility.  A second vertical rotating dial, which is compared with a fixed miniature airplane (lubber line), presents the magnetic heading of the aircraft at all times making heading information more natural.  The easy to read presentation allows the pilot to see the complete 360 degree dial.  They also feature an internal LED light and a universal mounting bracket.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality. 

FALCON GAUGE  Electrical Turn Coordinator is used for displaying the angular rate and sideslip of turning in horizontal flying and turning. The inclinometer indicates the slip angle of the aircraft while in a turn. A power failure flag drops into view whenever the voltage drops below a level for proper operation. The Turn Coordinator incorporates a built-in voltage regulator so it can be used with either 14VDC or 28VDC power system. It is compact in size and light weight eliminating radio interference.

This small, lightweight unlighted turn coordinator is excellent for homebuilt aircraft. Works for 14 Volt or 28 Volt systems. Features, power out warning flag with a 0° Panel. Fits Standard 3-1/8" Cut Out, 3-3/4" long.

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality.

FALCON GAUGE Electrical Attitude Gyro is intended for use in experimental aircraft only. It provides a continuous visual display of the aircraft attitude with respect to the earth for maneuvering around the longitudinal (pitch), and lateral (roll) axes, and yaw. A precision AC brushless motor is featured in the electrical attitude gyro. The Power failure drops into view whenever the power is insufficient for operation of the gyro. Electrical gyro can be caged by pulling the "Pull to Cage" knob. It is offεred with or without internal lighting and is designed to work with a 12V system. Dimension: 3-3/8"X 6.46/164mm.

Accelerometers (aka G-Meters) are used extensively in a wide range of applications including Aviation, Marine, Automotive, Military, and others. They are also used  in inertial navigation and guidance systems in airplane and ship autopilots.They help in a better understanding of static, such as gravity, or dynamic forces due to motion or vibration acting on an object.

Original Mechanical and more recent Digital accelerometers, used on civil and military aircraft, measure the instantaneous acceleration (or G-force) of an aircraft and its occupants compared to Earth's standard gravitational pull, in units of "G" (e.g., 1G, 2G). They enable pilots to monitor flight conditions, maintain safety, or practice aerobatics or combat maneuvers. Made by different manufacturers, they are offered as non-certified instruments, for use on  experimental and homebuilt aircraft, or certified products, installed on civil transport an military aircraft.

Mechanical accelerometers, included in this listing, use traditional components like proof masses, springs, and damping to measure acceleration based on displacement, offering high accuracy and durability for specific applications like flight stabilization and weapons communication. They are often of larger size and more expensive. Digital accelerometers, separately listed, are often Micromachined Micro-electromechanical (MEMS) systems, integrating sensors with microelectronic circuits for smaller size, lower cost, and high precision, making them ideal for flight stabilization, AHARS, and autopilot systems.

The choice of an accelerometer depends on the application's need for accuracy, size, cost, and resistance to harsh environments. 

Please consult the Product Description section and the supplied documentation for more information on different brands of our offered accelerometers.