In addition to their panel mounted VHF transceivers, ICOM RADIOCOMMUNICATIONS offers handheld transceivers for aviation & marine applications. Their ICOM A25 series are powerful air band handheld transceivers offered in communications only (A25C) or NAV/COM versions (A25N) with 6 watts of power and an IP57 waterproof rating. They include a large 2350mAh Li-ion battery, providing a long operating time. The easy-to-use interface and large 2.3-inch LCD display combine to provide stress-free programming and in-flight operation. Built-in Bluetooth®, GPS and VOR navigation. ICOM A25 transceivers come with Antenna, Belt Clip, Handstrap, Battery Case, Battery Pack, Headset Adapter, Power Adapter and Battery Charger. ICOM IC-M25 VHF Marine transceiver is a slim depth light weight floating marine radio, floatable into the water with  flash and sound alarms. With its IPX7 waterproof construction, the 700 mW audio output, 11 hours of battery life, buoyancy in water and many other features it can effectively serve a wide range of marine applications. For additional information please consult the Product Description section.

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

AVIASPORT Oil Pressure indicators (gauges) are designed specifically for ROTAX 912/914 aircraft engines with painted red, green, and yellow gauge markings. are available in two sizes: 52 and 57 mm. They are offered in two unit versions for readings in PSI or Bars. They work with different pressure sensors depending on these installed in ROTAX 912/914 engines: the VDO sensor (Before September 2008) or the 4..20mA sensor (after 2008).

GARMIN GI-106B TSO'd panel-mounted CDI is a high-quality course deviation indicator which includes a VOR/LOC/GPS needle as well as a glideslope needle, that can be hidden and disabled by an installer if the glideslope functionality is not needed. The GI 106B contains LED-lit GPS, NAV and VLOC mode annunciators, for an easy-to-read and modern look. TO/FROM annunciators are also LED, and when invalid, the needles are simply hidden out of the pilot’s view instead of using conventional invalid flags. The GI 106B replaces existing Garmin GI-102A & GI-106A models. It is compatible with the same pinout connections as the legacy GI 102A and GI 106A course deviation indicators, allowing for an easy upgrade path. It also features anti-reflective lenses and LED flood lighting for viewing at night.

The Vertical Speed Indicators (VSI)  provide an accurate indication of rate of change of altitude. 

UMA 8-210 Series Non TSO'd VSIs are offered in 2-1/4" and 3-1/8" versions. They are temperature compensated precision instruments provided with a zero adjustment screw on the face of the case in the seven o' clock position. They are powered by the aircraft static system. They are available in different ranges such as 0-2000 FT, 0-3000 FT, 0-4000 FT, or 0-6000 FT and different dial legends: Vertical Speed, Climb, Rate of Change, Cabin Climb.

3 1/8″ and  2 1/4″ VSIs are available with internal electroluminescent lighting in 3 colors: blue-white, aviation green and red. External DC-AC inverter required.  Weight 3 1/8″: 8.8 Oz - Weight: 2 1/4″ 7.4 Oz.

Case: Valox 420 Plastic

Lightweight, FAA-PMA approved compact power supply unit from WHELEN AEROSPACE TECHNOLOGIES (WAT) for installation in the wingtips and tail of the aircraft, eliminating long runs of high voltage interconnecting cables. Only an 18 gauge low voltage wire supplies power to each power supply and between wingtip mounted power supplies and switch. This system is not synchronized. Flashes 50 times per minute (comet flash).

Product Specifications:

Wt. 1.2 lbs.

Size: 5"L x 3"W x 3.06" H.

Current 1.7A -14V, 0.85A - 28V.

FAA-PMA Approved.

TSO'd Electronic Fuel Quantity gauges from UMA INSTRUMENTS (indicated by the letter "T" in the PN) are offered in 1-1/4 in. and 2-1/4 in. sizes for installation in respective panel hole diameters and mounted with (4) 6-32 screws. Smaller 1-1/4 in. instruments can be cluster mounted as close as 11/2” centers utilizing panel space without compromising readability. They can be powered from 14 or 28 volts. Signals are acquired from remote mounted sensors, processed and displayed on black analog dials with white easy to read markings indicating empty to full fuel level. Each gauge uses rugged aircore meter movement for vibration resistance and repeatability. Available in different versions based on their sender type and range. UMA sensors are sold separately.

This 2-1/4 inch flap indicator uses a resistance potentiometer as a flap position sensor. Transmitter is required. Wt: 9.8 oz.

HONEYWELL BENDIX KING® Aviation Database Services are offered for database updates of different navigation BENDIX KING® devices. They cover different geographical areas and are available for use in single or multiple devices, as single (one cycle) or multiple scheduled annual update cycles per year. They can be distributed through media (database cards/cartridges) and/or internet downloads (eliminating media and shipping costs). Database upgrades are subject to copyright restrictions and are allowed for use only in the specific aircraft and devices specified at the time of ordering. Orders for HONEYWELL BENDIX KING® database updates are fulfilled by AVIATIONEU TRAINING SYSTEMS & SERVICES which offers aviation database services, in cooperation with respective database providers, on a simplified subscription-based ordering process saving man effort, time and costs for customers. Please refer to our listed services or contact us for additional information.

KANARDIA INDU Series round Vertical Speed Indicators (Variometers) are part of INDU diverse family of non-certified gauges for use in ultralight aeroplanes, autogyros and helicopters. They feature an LCD display with possibility to personalise the displays and scales. They are offered as standalone (master) VSIs with internal pressure sensors or as slave instruments. The slave version requires a master altimeter or some PFD like KANARDIA NESIS, EMSIS, AETOS or HORIS to be present on the CAN bus. KANARDIA INDU Series round altimeters are available for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15").

Scale Ranges:

-M scale in meters per second (-10, 10)

-FT scale in feet per minute (-2000, 2000)

-KTS scale in knots (-20, 20)

UMA line of precision electronic pressure senders feature precision, solid state sensors and circuitry to give unequalled performance and are designed for rugged use in just about any environment.  They are offered in TSO'd and Non TSO'd models and gauge, differential and absolute types. UMA TSO'd electronic pressure senders are the most economical TSO’d units on the market. They are compatible with avgas, jet fuel, engine oil and many other fluids. Because they have internal voltage regulation, they are compatible with indicating instruments that do not have precision output voltages. Units for fuel and oil pressure are certified under TSO C47. Units for manifold pressure are under TSO C45a. For additional information please refer to the attached documentation.

FLYBOX® EFC-P Electronic Flap Controller by MICROEL SRL allows selection of the desired position of the flaps of an aircraft. EFC-P Controllers are offered in Rectangular (P/N: EFC-P-102010) or Round (P/N: EFC57-P-103010) versions. They are intended for use in ultralight and experimental aircraft. The working mode consist in selecting one of the four positions previously stored by the user, then the EFC-P will automatically moves the flaps in the exact position. The LEDs show the current position of the flaps or, when in movement, the position that they are reaching. For further information please refer to the attached documentation.

Amphenol MS MIL-C-5015 Circular Plug Connectors are designed to meet the demanding performance requirements of military standards. These cable mount circular plug connectors have proven electrical capability for equipment applications where durability is important. The Amphenol plugs have threaded couplings and single key/keyway shell polarization for an accurate and reliable connection. The solid shells of these MS Series circular MIL-C-5015 connectors are made from high grade aluminium alloy. The shells are electrically zinc plated with an olive drab chromate finish which ensures a high resistance to corrosion. The inserts of these military circular connectors are made from resilient synthetic rubber which offers a high dielectric strength and resistance to vibration.

The MS3106A-10SL-3S plug can be used with Turn Coordinator TC02E-3-2 or Turn & Bank Indicator TB02E-2-1.

The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

The AVIASPORT fuel pressure gauges  have been designed especially to measure fuel pressure in Rotax® engines 912 and work both with 12V and 24V systems. Unlike mechanical gauges, the AVIASPORT ielectronic gauges use a high precision sensor to be installed close to the engine, preventing fuel lines in the cockpit. These gauges are sold without sending units or as kits with matching senders whenever specified.

The GARMIN® GTR series COMM TSO'd panel mounted transceivers together with the GARMIN® GNC series NAV/COMM radios (please see separate presentation) are replacement products for the popular SL30 and SL40 models. They include new features to reduce pilot workload, while also offering an affordable solution to meet the requirements of the 8.33 kHz channel spacing European Union mandate under the Single European Sky (SES) initiative. They are more powerful than their SL-series predecessors with 10- or 16-Watt transmit power  available versions. They are offered as units only or as kits with a 4ft harness to AUDIO Panel.  If purchased with the 4ft harness, they can only be used  in experimental aircraft.

UNITED INSTRUMENTS 8000/8100 Series Air Speed Indicators (ASI) are FAA TSO'd for installation on certified aircraft. 

The 8000 Series ASI indicate the speed relative to the air at sea level altitude. The 8100 Series True ASI indicate the speed relative to the air at sea level or the desired altitude.The indicator has an inner dial to indicate true airspeed. The altitude and temperature are the conversion factors used to obtain this reading with the use of a setting knob. 

When properly connected to an airspeed tube, the 8000/8100 Series airspeed indicators measure the differential pressure developed between the pitot and static opening. 

The pressure is indicated in units of airspeed mph (M) and/or knots (K).

Product Specifications:

Certification: FAA TSO C2b 

Case Configuration: MS33638, 3 inch

Typical Weight: 0.7 pounds

Static, Pitot Pressure Connector:   1/8-27 ANPT

Installation: Removable spring nuts and #6-32 screws

Lighting: Available upon request. All lighted instruments require a light tray sold separately. Please refer to offered SIGMA-TEK 5000B 14V or 28V Light Tray.

The Distance Measuring Equipment (DME) systems used on aircraft provide information on aircraft slant distance, ground speed, and time to a ground station. They operate in the 960 – 1215 MHz frequency band.  

HONEYWELL BENDIX KING®, a leading avionics manufacturer offers panel mounted, remote DME, DME displays outlined below as well as accesories such as racks & connectors for DME installation and connection. They are offered for outright sale or in exchange for returned customer owned units in NEW Condition or USED (Serviceable or Overhauled) Conditions. The letters "SV","OH" and "EX" in the product reference numbers (SKU) indicate the condition/sale terms.

For additional information please consult the Product Description section & the supplied documentation.

HONEYWELL BENDIX KING® Panel Mounted DME

BENDIX KING® Silver Crown Plus line of Panel Mounted 100 watt KN 62A and 50 watt KN 64 DME are self-contained, 200-channel systems, which can be channeled remotely through almost any NAV receiver or tuned directly with their own frequency selection knobs. They offer dual channeling capability with two DME frequencies available at all times (one remote & one stored internally). Also feature redesigned faceplates for improved readings' illumination, large sturdy knobs and a three-position function switch for easy operation. They operate on any 11 to 33 VDC voltage without adapters or power converters while due to their modest power requirements no external cooling is needed. 

HONEYWELL BENDIX KING® Remote DME

BENDIX KING® TSO'd KN 63 DME is a complete 100 watt, 200-channel remote DME system utilizing Large Scale Integrated (LSI) circuit technology. Offering significant advantages in DME reliability and performance, the KN 63 is all solid-state (no transmitter tubes) and can be installed with either single or dual panel DME indicators (displays) such as the BENDIX KING® KDI-572 or KDI-574. 

HONEYWELL BENDIX KING® DME Displays

BENDIX KING® TSO'd KDI-572 or KDI-574 DME Displays can be used as master display controls and  information displays from KN 63 remote DME transceiver. The top-quality KDI 572 DME displays distance, groundspeed, and time-to-station all at the same time. Slant-range distance is computed digitally and displayed up to the maximum range of 399 nautical miles. Station lock-on is typically achieved within three seconds, with accurate groundspeed and time to station computations becoming available within one minute. The KDI 572's single control switch offers easy operation of the entire DME system as well as DME channeling. It has settings for ON/OFF, NAV 1, NAV 2, and DME HOLD. Comes with an indicator for area navigation (RNAV) to let you know if the displayed distance and time are to a waypoint or a radio navigation beacon. The TSO'd KDI 574 DME display is similar to KDI-572 but DOES NOT include ON/OFF, NAV 1/2, DME Hold selector. For use with Bendix/King Remote DMEs KDM-706 / KDM-706A, KN-63 DME and KTU-709 TACAN.

Solid State Cockpit Voice Recorders (SSCVR) and Flight Data Recorder (FDR), aka "black boxes", are required by Civil Aviation Authorities to be installed in large commercial aircraft and some smaller commercial, corporate, and private aircraft used to help reconstruct the events leading to an aircraft accident. Manufactured by various manufactuers such as HONEYWELL AEROSPACE, UNIVERSAL™ AVIONICS and others they are offered in different models, as CVR, FDR or combined systems, certified by FAA, EASA and other CAAs and available in NEW Condition but also as USED (OVERHAULED) units for straight purchase or exchange. For additional information please consult the Product Description section, the supplied documentation or contact us for a quotatin.

The LXNAV G–Meter  (accelerometer) is a standalone unit, designed to measure, indicate and log g–forces. The unit is offered in 57 mm or 80 mm diameters for installation into the aircraft instrument panel. It comes in two versions, standard and with flight recorder (FR).

The LXNAV G–Meter has an integrated high precision digital pressure sensor and inertial system. The sensors are sampled more than 100 times per second. Real Time Data is displayed on a QVGA 320x240 pixel 2.5″ high brightness color display. To adjust values and settings the LXNAV g–meter has three push buttons with fixed functions. The top button is ESC (CANCEL), the middle is to switch between modes and the lower button is the ENTER (OK) button.

The unit's inertial platform integrates a  ±8g accelerometer. Device is showing current g–load in navbox/needle and it’s min-max values in bar. Last flight min/max load navboxes are persistent till next flight. Min/Max limits with Warning zones can be defined.

Real Time Data is displayed on a QVGA 320×240 pixel 2.5-inch high brightness color display.

The Logbook menu displays the list of flights. If the RTC time is set properly the take-off and landing time shown will be correct. Each flight item consists of the maximum positive g–load, the maximum negative g–load from the flight and the maximum IAS. This function is available only with “FR” version.

Product Features:

• An extremely bright 2.5″ QVGA color display readable in all sunlight conditions with the ability to adjust the backlight.

• Three push buttons are used for input.

• RS232 input/output.

• Micro SD card

• 320x240 pixels color screen for additional information such as minimum and maximum g–force

• Built in RTC (Real time clock)

• Logbook

• 100Hz sampling rate for very fast response.

• Power supply cable included

HONEYWELL BENDIX KING® KI-229 Radio Magnetic Indicator (RMI) provides bearing information to either ADF or VOR stations by means of two pointers each of which is read against compass card.

The KI-229 RMI combines three data points on one indicator. The current aircraft heading from an HSI is shown on the card. The magnetic headings to VOR and NDB stations are shown by the twin needles. By combining all this information visually, less interpretation is required thus enhancing overall situational awareness, something especially helpful when the workload is high.

The KI-229 requires inputs from ADF, HSI and NAV receivers.

Product Features:

14/28 volt lighting

Compatible with Nav Receivers such as KN-53, KNR-615, KNR-630/631/632/633, KNR-634, KNR-665, and KNR-665A

Compatible with Nav systems including RNAV such as KNS-80 and KNS-81

Compatible with ADF receivers such as KR-87 and KDF-806

Compatible with Compass systems such as KCS-305 and KCS-55/55A

Requires input ARINC Compass System

TSO'd

Product Specifications:

TSO Compliance: Env. Cat. RTCA DO-160A A1C1/A/SKP/XXXXXXA/B/AAA

Weight: 2.8 lbs. (1.3 kg)

Temperature: -20 to +55°C

Altitude: 35,000 feet

TSO (Compass): TSO C6c

TSO (ADF): TSO C41c Class A

TSO (VOR): TSO C40a

Heading Input: Operates from any slaved magnetic compass with ARINC X,Y,Z outputs

VOR Video Input: 0.5VRMS 0 deg. phase composite 30Hz variable AM and 30Hz reference FM on a 9960Hz carrier (0.7VRMS maximum)

EASA Certified VHF transceiver 57mm with 6W output power. Automatic selection of 8.33kHz/25kHz spacing and OLED display.