Automatic portable radio beacons (ELT(AP) АРМ-406П (ARM-406P), АРМ-406П1 (ARM-406P1) and АРМ-406АС1 (ARM-406AC1) are safety devices designed to transmit via satellite to the stations COSPAS-SARSAT distress radio signals with aircraft coordinates received from the onboard computer system.Such information facilitie identification of the aircraft and guidance of S&R facilities to the accident site. Located in the aircraft cabin these devices offer the possibility of quick use in an emergency.

The automatic portable radio beacon АРМ-406П1 (APM-406P1) includes:

- monoblock P, consisting of a double protective casing with shock absorbers installed in it, an overload sensor (DP) and an AC1A monoblock;

- remote control PDU-406 (ПДУ-406) installed in the cockpit;

- external antenna ANT-406VA (АНТ-406ВА), mounted on the aircraft body.

The АС1А monoblock is  a portable radio beacon, including a PM-AC1A (ПМ-АС1А) transmitting module, an АРМ-043-01 autonomous power supply unit and an ANT-APM-01 (АНТ-АРМ-01) antenna. The emergency mode of operation of the AC1A monoblock can be switched on both from the remote control and from the DP, as well as manually when removing it from the protective casing when leaving the emergency aircraft.

Autonomous power supply (APS) units are also offered for use with the radio beacons. АРМ-043 (CDKT.436140.590) 14.4V are intended for use for beacons manufactured before 2013 while АРМ-043-01 (CDKT.436140.590-01) 10.8V for beacons manufactured after 2013. Unless otherwise specified their replacement frequency is once every 3 years with a 3-year self life.

For additional information please refer to the supplied documentation or contact us.

The STRATOMASTER VEGA range instruments/indicators from MGL AVIONICS includes different 2 1/4" (57mm) microprocessor based color display instruments operating over a wide supply voltage range of 8 to 30V DC with with built in reverse and over voltage protection. They are non certified and only suitable for installation in experimental and sport  (LSA) aircraft. Using a high resolution color graphics display, these instruments/indicators provide excellent daylight readability with built in backlighting making them easy to read at night time. They include a rotary control plus 2 independent keys for easy menu navigation and to access specific instrument features. Sensors are also offered to enhance their functionality. The MGL AVIONICS STRATOMASTER VEGA Series instruments/Indicators include: Artificial Horizon & Magnetic Compass Display, Altimeter/VSI, ASI, ASI/VSI, Engine Monitoring System (EMS), Fuel Computer, Information Display, Manifold Pressure, Température, RPM, Hobbs, Universal Engine/Rotor RPM, Hobbs, 4-Channel Thermocouple (EGT/CHT), 4 Channel Universal Analog Input (Pressure/Temperature/Voltage/Current) and NAVCOM Control head for MGL N16 NAV/COMM or V16 COMM VHF.

The V16 VHF Aviation Radio Transceiver by MGL AVIONICS  is the latest generation and the first in a new ecosystem of Comm Radios, Nav Radios and controllers designed with modern components and ingenuity for the lowest cost. It is a Non-TSO'd split design remote-mount COMM Radio (replacing MGL V6) for use in experimental and light-sport aircraft, which can be controlled directly by an MGL Avionics iEFIS (Gen 3 and above), with or without RAZOR/VEGA Controls or by a mix (and any number) of MGL RAZOR or VEGA series Control Heads, enabling dual radio displays and controls. It boasts 10 Watts of transmit power (unmodulated carrier). When paired with a RAZOR/VEGA control, the control can be connected to any EFIS or display that communicates with SL30/SL40 protocols, to tune the radio and load frequency lists. The V16 includes a 2-place intercom with a wide-range VOX system. Multiple headsets can be connected to the passenger channel if necessary. The advanced voice-activated intercom provides clear audio in noisy cockpits. In extreme cases the intercom can be activated via a switch connected to V16 (intercom PTT). For additional information please refer to the attached documentation.

The N16 split design remote-mount VHF Navigation Receiver by MGL AVIONICS belongs to a new generation of navigation receivers based on RF direct conversion technology. The N16 is identical in size to the V16 COMM radio and can be used in a simple configuration as combined NAV/COMM solution for both MGL EFIS systems using the MGL protocols or, if at least one MGL VEGA or RAZOR control head is used these heads can provide NAV/COMM data output on RS-232 that is compatible with most EFIS systems on the market. Like V16 COMM, it is a Non-TSO'd NAV receiver for use in experimental and light-sport aircraft. For stand-alone operation, at least one MGL RAZOR control head or two MGL VEGA heads are required. Using these heads a fully compliant solution is presented that provides both VOR CDI using a rotary control for OBS bearing entry as well as the familiar two bar ILS localizer and glideslope indication. The VOR provides a display for bearing to station and radial from station at the same time for up to two simultaneously-received VOR stations. For additional information please refer to the attached documentation.

The new OROLIA-KANNAD INTEGRA 406 GPS ELT is a major step forward in the development of ELT technology and aircraft safety. Major benefits over standard ELTs include  a fail-safe automatically activated system for transmission of both the unique identification and GPS position in case of ditching of the aircraft or a crash landing as well as the ability for the pilot/ crew to remove the ELT from a downed aircraft. In addition,it features internal 406MHz and GPS antennas saving significant cost on aircraft  installation without the need for an  external antenna (national authorities’ rules and regulations permitting) and additional external GPS interface.

The 406 INTEGRA fixed ELT(AF) transmits on both the international 406MHz satellite search and rescue system (min  24 hours from activation) and on 121.5MHz for local direction finding. Minimum operating temperature is -20°C. The internal battery life of the INTEGRA is 6 years. Complies with European and FAA standards.

406 INTEGRA ELT(AF) is designed for flat installation on fixed wing aircraft and can be connected to an outside antenna (sold separately). 

This ELT comes with:

the COMPACT universal mounting bracket

RC200 remote control panel

DIN-12 connector

SUB-D 9 pts female connector

Note: Hazardous Material

The KANNAD 406 AF automatic fixed Emergency Locator Transmitter (ELT)  is designed to be installed near the tail of the aircraft and to be connected to an outside antenna (sold separately). A sophisticated “shock sensor” will activate the ELT automatically in the event of a crash. Its small size and light weight make it ideal for general aviation aircraft.  The Mounting Bracket (Strap) is not included. 

A separate version (406 AF-H) has been specifically developed for installation on board a helicopter in flat position (to gain space compared with usual installations at 45° downwards). 

Product Features:

Optional Navigation Interface transmits GPS coordinates significantly shortening Search and Rescue response time.

Operates without aircraft power and incorporates an internal alarm/buzzer avoiding costly installation procedures.

Six year lithium manganese battery.

Three frequency transmitter (121.5 / 243 / 406 MHz)

Weight: (Including batteries) 2.44 lbs (1110 g) / max 2.60 lbs (1180g)

Please refer to the supplied documentation for additional information.

Note: The Kannad 406 AF-COMPACT version, designed for private pilots and light aircraft (usually supplied as kit with rod or whip antennas), has been discontinued and is no longer available.

The KANNAD 406 AS (P/N S1823502-03) is a aeronautical survival beacon. Thanks to its small size and light weight, the Kannad 406 AS fits easily inside a liferaft. It is supplied with a floating collar.

The KANNAD 406 AS is qualified by the French Civil Aviation in Europe with JTSO-2C91a & JTSO-2C126 and by FAA with TSO-C91a & TSO-C126 applied to “survival” beacons.

The ELT is programmed with either the aircraft tail number, a serial number or the aircraft operator designator. It can be installed inside an aircraft on a mounting bracket or in a carry-off bag (both on options).

The mounting bracket option includes a locking pin to avoid accidental activation before ELT removal. The locking pin can be ordered separately with the carry off version.

The ELT can be fitted with a "Water Switch Sensor" to be activated automatically when in contact with water. A buzzer and a led indicate activation.

An integrated “self test” checks the main functions of the beacon. The test result is given by the led flashing sequence.

Product Features:

Battery replacement is only every 6 years.

Precise pinpointing (<1NM) due to the unparalleled frequency accuracy of the 406 transmitter.

Three frequency transmitter (121.5 / 243 / 406 MHz)

Weight (including battery, auxiliary antenna and floating collar) 2.53 lbs (1150 g)

Options:

P/N S18 20 511-03 carry-off bag

P/N S1820511-02 Mounting bracket with locking pin

P/N S1820514-14 Water Switch Sensor

LORD Corporation AM Series Low Profile Avionics Mounts (also referred to as isolators)) set the standard for compact, highload, high-capacity isolators. They are designed to support and protect avionics equipment in all types of aircraft. Inertial guidance and navigation systems and radar components are examples of applications where these mounts are used. In addition, AM Series mounts are used to isolate engine/aircraft accessories such as fuel controls, pressure sensors and oil coolers. These mounts  are tested and approved to the environmental tests appearing in MIL-STD-810 or MIL-E-5400. They may be used in a temperature range of -65°F to +300°F (-54°C to +149°C) for BTR® Silicone and -40°F to +300°F (-40°C to +149°C) for BTR® II Silicone. They are made with specially compounded silicone elastomers which exhibit excellent resonant control evidenced by the low transmissibility at resonance. These designs also provide linear deflection characteristics.

LORD Corporation AM Series vibration isolators are offered in different sizes and capacities. Please refer to the attached documentation.

The PS ENGINEERING PMA7000 series of TSO'd audio panels offer a very affordable upgrade for existing BENDIX KING KMA24 units while providing a a great set of capabilities. The PMA7000B with built in Marker Beacon is KMA24 pin compatible. Existing wiring to the KMA24 can be maintained making the cost of the upgrading less expensive. In addition, it is plug and play with the original PMA7000M-S, the PMA6000M-S, and the KMA28 audio panels. PMA7000 series audio panels feature  6-place IntelliVox® automatic Voice Operated Relay (VOX) hi-fi stereo intercom system with Soft Mute™. The PMA7000B provide 3-com capability with the option to easily convert Com 3 to a full duplex cellular telephone interface  and "Split Mode" allowing the pilot to be on Com 1 while the copilot is on Com 2.

Product Features (depending on model selected):

IntelliVox® automatic VOX system with individually gated microphones

6 - Place hi-fi stereo intercom with Soft Mute™

Bluetooth(R) Interface (Model PMA7000BT) allowing music streaming as well as interconnect to an iPhone, iPad, iPod, or any other Bluetooth(R) enabled device that has the Handsfree or A2DP profile.

2 - music mute modes: Mute On and Mute Off

Built-in Marker Beacon Receiver

Cellular telephone input with dedicated On/Off hook switches for unprecedented flexibility

Split mode for dual audio panel capability

2 Hi-fidelity stereo music source inputs

3 - Isolation modes - Pilot Isolate, All, and Crew

4 - Unswitched inputs

Selectable music muting for passengers

Selectable special intercom mode with ""Alternate Intercom Mode""

RAM (Radio Active Mute) eliminates constant back ground noise from radio static

The only knob that is on the panel is a concentric volume control for the Crew and Passengers intercom volume. The all push button controls of the PMA7000B allows for easy selection of Coms and other Nav aids.

Certification: FAA Export 8130-3

Warranty: 24 months

PS ENGINEERING has revolutionized audio control in general aviation airplanes. At that time, the original PMA6000 took the audio panel from a collection of switches added as an afterthought, to a multitalented intersystem focal point for cockpit audio.

Radio selection, cockpit communications and even music were seamlessly combined in the modern audio control panel. The PMA6000-series set a benchmark for all GA audio panels that followed.

The next generation PMA6000B benefits from PS Engineering's long experience of audio panel control design and manufacturing experiences. It is an excellent low cost audio panel alternative to the higher end systems that PS Engineering has become so famous for. 

The PMA6000B combines an audio selector panel with a top-quality manually adjusted 4 place VOX mono intercom and a slew of features to enhance versatility and utility. The PMA6000B holds both FAA TSO as well as EASA ETSO and was designed to be made easier to install because of a single 44-pin Sub-d connector. Different PMA6000B models offered with or without marker beacon receiver.

Product Features:

Built-in 4 place mono intercom PS Engineering's ""Set-it and Forget-it"" manual VOX

Optional built-in marker beacon receiver

Split mode for dual audio capability

2 - Com Capability

3 - Intercom isolation modes - Pilot Isolate, All, and Crew

2 - Music inputs with Soft Mute™

2 - Unswitched inputs

6 - Switched inputs

A patented ""swap"" function allows selection of Com 1 or Com 2 from remote pushbutton

Fail-safe feature automatically hard-wires the pilot to Com1 in the case of an outage

Single 44-pin connector making installation easier

Certification: FAA TSO/EASA ETSO

Warranty: 24 months

The analog and digital portable two-way radios (walkie talkies), manufactured by QUANZHOU YANTON ELECTRONICS CO., LTD., come in different models covering UHF or VHF and UHF frequency bands and different power outputs for communication over different distances. They have an ergonomic design and cover the needs of various operations. YANTON radios are approved by the Ministry of Information Industry in China and the European CE, RoHS and USA FCC certified/approved for use in other countries.

Splits the signal from a single NAV antenna into two NAV receivers and one glide slope receiver.

The AV-534 is a TSO'd heavy-duty stainless steel bent whip VHF communications antenna with porcelain insulators and mounting hardware. The AV-534L is same antenna as AV-534 but furnished with 96" lead of RG58 A/U cable with male BNC and ground strap with lugs.

The AV-525 is a VOR/LOC/GS antenna similar in style to the AV-12 but utilizes an internal balun transformer. The antenna is rated at speeds up to 350 mph and altitudes up to 50,000 feet. It is a direct replacement for the CI 157P.

Product Specifications:

Model: AV-525

Application: VOR/LOC/GS Receive Only

Frequency: 108-118 MHz (VOR/LOC) -328-336 MHz (GS)

Impedance: 50 Ohms Nominal

VSWR: 3.0:1 Maximum 108-118 MHz - 2.0:1 Maximum 329-335 MHz

Polarization: Horizontal

Pattern: Omni-Directional

Connector: “BNC” Female

Max. Weight: 0.50 lbs.

Certification: FAA TSO C34e, C36e, C40c

The AV-532 is a VOR/LOC/GS receive only antenna which consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph.

R.A. MILLER INDUSTRIES (RAMI) aircraft antennas cover a wide range of functions including communications, NAV antennas, GPS, ADS-B, transponder, VOR localizer, glide slope antennas, and marker beacons. They are known for their streamlined aesthetics, quality, and reliable performance. Offered in different TSO models, RAMI wire whip and rod antennas ELT (Emergency Locator Transmitter) devices are intended for use on low-speed General Aviation aircraft. 

RAMI AV-100 FAA TSO C126a Airborne ELT Antenna is a passive two frequency (121.5 & 406 MHz) whip antenna, designed for speeds up to 250 knots. Impedance 50 Ohms Nominal, VSWR (Maximum):121.5 MHz 2.0:1 / 406 MHz 1.5:1, Polarization Vertical, Pattern Omni-Directional, Connector BNC Female, Weight: 3 oz. Maximum, Color: Black.

RAMI AV-200 FAA TSO C126a Airborne ELT Antenna is a passive two frequency (121.5 & 406 MHz) whip antenna, designed for speeds up to 250 knots. It meets DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies. Impedance 50 Ohms Nominal, VSWR (Maximum):121.5 MHz 2.0:1 / 406 MHz 1.5:1, Polarization Vertical, Pattern Omni-Directional, RF Power Capacity 10 Watts CW, Connector BNC Female, Weight: 0.19 lbs. Maximum, Max Height 24″.

RAMI AV-300 FAA TSO Airborne ELT Antenna is a passive three frequency (121.5, 243 & 406 MHz) fiberglass rod antenna, designed for speeds up to 350 knots. Impedance 50 Ohms Nominal, VSWR: 2.0:1 max at 121.5 MHz,2.0:1 max at 243 MHz, 1.5:1 max. at 406 MHz,  Polarization Vertical, Pattern Omni-Directional, RF Power Capacity 10 Watts CW, Connector BNC Female, Max Weight 9 oz, Max Height 14″.

The R.A. MILLER (RAMI) TSO'd AV-74 (.425 Stud Length) & the AV-74-1 (.800 Stud Length) are broadband blade type antennas for transponders or DME applications. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antennas are supplied with cellular neoprene mounting pad and hardware. Designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. They have a drag force of 0.09 lbs @ 250 mph. These antennas are direct replacements for the CI-105 antennas.

Product Specifications:

Application: Transponder/DME

Frequency: 960 - 1220 MHz

Impedance: 50 Ohms Nominal

VSWR: 1.5:1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: "BNC" Female

Max Height: 3.4"

RF Power Capacity: 2.5 kW Peak

FAA TSO: C66c, C74c

The RAMI AV-10 COMM Antenna is designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base. The antenna essentially matches the styling of the communication antennas currently used on most singles and light twins. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 2.70 lb @ 250 mph.

Product Specifications:

Application: Airborne Communications

Frequency: 118 to 137 MHz

Impedance: 50 Ohms Nominal

VSWR: 2.0 to 1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: Type "BNC" Female

Max Weight: 8 oz

Max Height: 20-1/4"

RF Power Capacity: 25 Watts

SAFE FLIGHT (SF) is the world's leading manufacturer of aircraft lift instrumentation and control systems. SAFE FLIGHT FAA certified Lift Detectors & Angle of Attack (AoA) Sensors are installed on hundreds of aircraft worlwide.

SF’s Lift Detector is the foundation of SAFE FLIGHT’s Stall Warning systems. This was the first and still the industry standard for stall warning in light aircraft. It  consists of a small tab or vane which senses the change of the stagnation point on the wing and an alerting device used for stall warning. The  detector warns by light and horn of any danger of an approaching stall regardless of the flight maneuver. It comes in different variations complete with installation kit & instructions. 

SF’s SCc Angle of Attack (AoA) system meets FAA requirements by providing both flashing red LEDs and an unmistakable audio output to alert the pilot of increasing AoA and an impending stall. It consists of two key components, the Lift Transducer and the the Indexer Computer. Available for retro-fit. Including the Lift Transducer, the Indexer Computer, and all necessary wiring, connectors and installation hardware.

For additional information please refer to the Product Description section and the supplied documentation.

TKM AVIONICS offers different NAV/COMM radios as slide-in replacements of legacy products from BENDIX KING and other manufacturers. The Michel MX-170 by TKM was introduced in early 1984 aiming to replace legacy BK radios such as KX-170A, KX-170B, KX-175, KX-175B type transceivers. The latest TSO'd MX170C with 760 VHF COMM channels and 200 NAV channels is designed to be electrically and mechanically interchangeable (slide in replacement) with the Bendix King KX170 and the Bendix King KX175 series of NAV/COMM radios. Like other TKM radios,the MX170C NAV/COMM has nice features and excellent performance. The dual color LED frequency displays are self-dimming, showing standby frequencies with red and active frequencies with yellow color. The channeling outputs are for 40-channel glide slope (King Glide Slope) and 200 channels (King Slip Code). The MX 170C operates on 13.75 Adc maximum current in transmit. Please refer to the attached owner manual for additional information.

ETSO'd Slimline Panel Mounted 10 W VHF Radio with built in 2-place intercom with auxiliary inputs for stereo music and audio warnings. Available with 8.33 kHz or  25kHz frequency spacing options.

ETSO'd Slimline Panel Mounted 16 W VHF Radio with built in 2-place intercom with auxiliary inputs for stereo music and audio warnings. Available with 8.33 kHz or  25kHz frequency spacing options.

The TT31 is a power-efficient, inexpensive, Mode S transponder by TRIG AVIONICS  that meets the European elementary surveillance requirements. The TT31 fits in the same mounting tray as the BENDIX KING KT76A transponder, making it a great choice for either upgrades or new installations. The TT31 plug and play design minimises the cost and downtime for the upgrade. The TT31 is TSO approved for fitting to European and FAA registered aircraft. With a new software upgrade and a connection to an appropriate GPS, this will make the TT31 compliant with the FAA final rule on ADS-B Out (TSO C166b) for 2020.

Product Features:

European Mode S (*)

Low Power Consumption

No Cavity Tube

240 Watts Nominal Output

Plug and Play Installation

Backlit LCD Display

Easy to Use Rotary Knobs

Timer/Stopwatch Function

Altitude Monitor

Certified 1090ES/ADS-B Out (TSO C166b)

NOTE (*): All Mode S transponder upgrades for EASA certified aircraft must be carried out by a licensed engineer using a Minor Change approved by EASA. 

Pre-approved Minor Changes for popular aircraft types may be available for this device. In this case no EASA fees for the issue of Minor Change approval apply. Contact us for more information.

YAESU rechargable batteries are intended for use with YAESU handheld transceivers.