Aluminum valve as used in production aircraft with Model A-110 master cylinders for dual brake installations. Complete with AN flare fittings.

RAPCO produces quality FAA-PMA approved replacement organic and metallic brake linings for Cleveland and McCauley brake assemblies on most general aviation aircraft. Organic linings are actually made from a semi metallic mix. RAPCO combines brass, copper and Kevlar fibers with a high temperature binding compound to provide outstanding performance and long service life. Most RAPCO organic linings have a built in wear indicator, which reduces the risk of damage to the brake disc and helps to optimize lining life. RAPCO organic linings are available in boxes of 10 or in organic lining kits containing the proper number of linings and rivets necessary for replacement on Cleveland or McCauley brake assemblies. They are convenient to have on hand when the need for relining occurs. Metallic lining replacements for the Cleveland brake assemblies are made of sintered steel, a specially developed process that fuses metallic particles to a steel carrier plate. RAPCO metallic linings offer long life and excellent braking performance.

RAPCO Brake Rivets are FAA-PMA approved quality tubular rivets produced from plated steel for mounting aircraft brake linings. The RAPCO RA825 Rivet Tool Kit is recommended for proper installation.

Please refer to the attached Application Guide for additional information.

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

SPECIALTY TIRES products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case, additional cost may apply.

5 inch wheel with 4.3 inch width with an additional 1.39 inch caliper spacing. 

The company SPECIALITY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

SPECIALITY TIRES products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case, additional cost may apply.

MATCO mfg's PVPV series parking brake valves have been designed for installation in a wide variety of homebuilt aircraft applications due to their light weight and easy in-line installation . In-line installation can be used in conjunction with either a single or dual parking brake system set- up with the respective use of valves  PVPV-S or PVPV-D available in single or double sided configuration.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) FAA/PMA approved wheels & brakes and tires (separately presented) made for flying and landing off-field in the most rugged backcountry conditions. 

ABI FAA/PMA approved wheels and brakes include assembly kits as direct replacements for respective Cleveland wheel & brake assemblies, wheel assemblies, brake assemblies, brake calipers and other replacement parts.

For more information on ABI wheels and brakes please refer to the Product Description section and the supplied documentation.

BERINGER AERO manufactures a range of wheels, brakes and related parts for use on certfied and non-certified aircraft (LSAs, experimentals and gliders). Their product portfolio includes among others wheels,Certified (STC) and Non Certified wheel/brake assemblies, wheel and brake parts and related tools.

Wheel and brake parts are included in this presentation while wheels and wheel/brake assemblies and tire options are separately presented.

For more information please refer to the Product Description section and the supplied documentation or contact us.

GOODYEAR® AVIATION FLIGHT MATE (Butyl) tire tubes offer superior air retention in a wide range of temperatures, and dramatically reduce time spent maintaining proper tire pressure. They are made from natural rubber offering long life and meeting cold temperature performance requirements: extreme low temperature of minus 50 degrees C. These tubes  feature continuous extruded construction for uniformity, premium aircraft valves and an average weight of 3 lbs.

The benefits from their use include  excellent resistance to inflation loss due to the proprietary Butyl compound as well as better balance (no overlapped splice).

The GOODYEAR® AVIATION FLIGHT MATE butyl tubes are the perfect complement for Goodyear and other brand name aircraft tires. They comply with the requirements of SAE Aerospace Standard AS50141 and meet MIL-I-5014 military specification (except for packaging). 

The letter "B" indicates a BENT valve stem. The letter "S" indicates a STRAIGHT valve stem. The digits inside the parenthesis indicate the use with different tires as follows:

(1) For use in both 5.00-5 and G380x150-5 (15x6.00-5) tires.

(2) For use in both 6.00-6 and 15x6.00-6 tires

(3) For use in both 7.00-6 and 8.00-6 tires.

(4) For use in 6.50-8, 19.5x6. 75-8 & 22x8.00-8 tires.

(5) Discontinued

CLEVELAND WHEELS & BRAKES, part of PARKER HANNIFIN CORPORATION, offers an extensive range of FAA-PMA approved master brake cylinder assemblies for use in different aircraft.

CLEVELAND master cylinders come in push or pull types in different bore, stroke and displacement variations in inches and 7/16-10 or 1/8-27 N.P.T. port sizes. Some models include parking valves and reservoirs. 

For additional information please consult the supplied documentation on technical characteristics and suitability of the master cylinders for specific aircraft.

Aircraft wheels and braking systems serve a vital function during takeoff, landing and taxiing. Along with landing gear, aircraft wheels and brakes are critical to ensure safe and reliable aircraft ground operations under extreme forces, stress, as well as wear and tear from general operation and the environment. 

Aircraft brakes are arranged in multiple disk pairs, which are commonly referred to as brake Heat Sink. As aircraft brakes convert the kinetic energy of the moving airplane to heat energy, they are also referred to as Heat Packs made of steel or carbon fibres. Conventional metal (steel) brakes are gradually replaced by carbon brakes (particularly on larger, long-haul commercial airplanes) due to their higher efficiency in braking applications, lower weight and resulting less fuel consumption and lower CO2 emission by the engines. 

Commercial aircraft wheels and braking systems are produced by by leading manufacturers such as Honeywell Aerospace, Collins Aerospace/Goodrich Wheels & Brakes, Parker Meggitt Aircraft Braking Systems and Safran Landing Systems (formerly Messier-Bugatti-Dowty) and offered as OEM products/parts for an extensive list of commercial aircraft platforms.  For more information on different OEM products please refer to the Product Description section, the supplied documentation or contact us.

Carbon and steel heat packs are also offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. They are  PMA approved (*) parts by the Civil Aviation Administration of China (CAAC) for use on an extensive list of Western and Eastern commercial (civil ) aircraft platforms including Boeing, Airbus, McDonnell Douglas, Ilyushin and others. Sourced from quality suppliers they are available in an extensive product range, consist cost effective alternatives equalling or exceeding standards of the respective OEM products and feature high quality, safety, improved design, significant cost savings and fast deliveries. For more information on AVIATIONEU NEW ERA PMA brake heat packs please consult our separate product presentation or contact us.

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. They are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed and is available please mention during the order placement. In this case, additional cost may apply.

Inner tubes are also offered for tube type tires which generally share the same designation as the respective tire (e.g. a 5.00-5 inner tube fits a 5.00-5 tire) with exceptions when the inner tube can fit more than one aircraft tyre size (e.g. the 5.00-5 inner tube can be used in both the 5.00-5 as well as the 15×6.00-5 tires). Inner tubes are supplied with valves of different designs (e.g. straight or 90º bend valves) carrying respective designations. Accessories such as French Chalk, Valve Caps, and Cores are also available on request. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

Bias and radial aircraft tires and matching tire tubes are offered as part of our own labelled (AVIATION NEW ERA) product lines for use in main and nose wheel applications in general aviation, commercial, military aircraft and other projects. 

Sourced from co-operating quality manufacturers holding ISO and other certifications, the AVIATION NEW ERA tires are available in Tube or Tubeless types in different ply ratings, tread patterns and sizes to meet respective rated load and pressure requirements of intended applications. For tube type tires, matching tire inner tubes with different types of valves are also offered. The AVIATIONEU NEW ERA aircraft tires and inner tubes are intended as cost-effective alternate parts to the respective known brands. 

They are approved for use on the respective aircraft in their country of origin and other countries where they are exported depending on signed bilateral agreements between the respective Civil Aviation Authority of the producer and the export country.

All AVIATION NEW ERA tires and inner tubes are supplied with our standard Certificate of Conformance. If other certification is required, please specify at order placement as additional cost may apply.

Please refer to additional information  in the Product Description section for a better understanding of their construction and characteristics, our brief product brochure on aircraft tires and tubes or contact us for additional information.

AIRFRAMES ALASKA designs and manufactures ALASKAN BUSHWHEEL (ABI) wheels & brakes and tires made for flying and landing off-field in the most rugged backcountry conditions. ABI tires absorb the energy of rough landings, taking the brunt of the impact off the pilots, wheels, gear, and airframe. Unlike your standard aircraft tires, Bushwheels are tubeless. This distinctive design eliminates the problem of tire slippage and stem shearing and makes it possible to run these tires at very low PSI. Different models are offered to suit needs of aircraft operating conditions. ABI tires are FAA TSO C62d approved. Models are available in the following versions and fit standard 6" wheels unless otherwise mentioned:

Standard thread: 3/16"

Heavy thread: 1/4". Heavy tread 26" ABI tires are constructed with a thicker tread layer. Suitable for pilots operating their aircraft on pavement between backcountry flights.

The 26" ABI tires are designed and handcrafted for use on lighter aircraft such as Cessna 182 & Cessna 206. They're also the ideal "entry level" bush tires for pilots upgrading from standard tube type aviation tires for the first time.

A step up in terms of size, 29" ABI tires have a slighter profile and create less drag than larger Bushwheels. This places these bush tires in size/weight sweet spot for heavier aircraft like Cessna and Maule while still providing the footprint and energy absorption critical in bush landings. 

The 31" ABI tires are handcrafted featuring an impressive ratio of weight to size. Their solid footprint makes these bush tires the de facto standard for bush pilots.

The 35" ABI tires are designed for the most rugged off-airport operations. They require ABI 10650 10" wheels.

The 35" Beaver ABI tires stand up to the heavier load of de Havilland Beaver and Pilatus aircraft with a gross weight up to 5600 lbs (2800 static load rating per tire).

A grease seal, often called an oil or dirt seal, is a type of seal utilized to retain grease in a case or housing. Grease seals close spaces between stationary and moving components in mechanical equipment, helping prevent lubricant escape. Preventing harmful containments from entering machinery is another critical function of a grease seal. Oil and grease seals are available in numerous lip materials. Popular materials include felt, leather, urethane, nitrile, polyacrylate, ethylene-acrylic or polyacrylic, silicone, fluoro-elastomer, tetrafluoro-ethylene propylene and PTFE. Cleveland Grease Seals are intended for use in Cleveland Wheel Assemblies. 

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

Michelin® AIR® Aircraft Tires offer just the right balance of performance and durability required by demanding pilots. The sidewall compound is optimized to provide maximum ozone and ultraviolet light protection, while the MX2000 tread compound is Michelin’s toughest. In addition, the new Air Cushion Inner Liner provides a protective cushion over the casing plies which guards against inner tube chafing. And the “Posi-Fit” bead construction reduces movement between the tire and the wheel for improved lateral stability. Offered in NEW or USED (RETREAD) (*) Condition.

Michelin® AIR® Aircraft Tires are designed to provide:

- a very long tire life and lower maintenance costs due to fewer tire changes

- exceptional balance for smooth taxiing,even wear, and heat resistance

- maximum protection against sidewall cracking caused by ozone and UV light

- excellent lateral stability and impact absorption, even under rough landing conditions

Product Features:

Deep Tread Depth: Thick rubber in the tread area helps provide for a long tire life. Contributes to lower maintenance costs due to fewer tire changes.

Unique Bead Construction: Provides a firm (tight) fit to help reduce movement between the tire and wheel. Helps improve lateral stability for a long tire life, even under rough landing conditions

Optimized Casing Design: Proprietary Michelin production processes help balance stresses within the tire structure. Strong, yet lightweight nylon cords are designed to exceed strict industry standards for overpressure strength. Results in an effi cient, lightweight product with excellent balance properties for smooth taxiing, even wear, and resistance to heat buildup for a long tire life.

Customized Rubber Compounds: Sidewall is optimized for both ozone and ultraviolet light protection which helps reduce ozone cracking in key areas of the tire. Provides our maximum amount of exterior wear and crack resistance for a long tire life.

Contoured Shoulder Design: Helps absorb lateral impacts associated with landing. Designed to help the tire achieve a full life, even under adverse conditions.

(*) Retread tires have undergone a remanufacturing process to replace the worn tread on used tires with new tread to help extend the life of the tire. The number of times the  tread has been replaced in the tire casing is indicated by a number just after the letter "R" in the product reference number (SKU), namely R1, R2, R3 and so on.

MICHELIN® Aircraft Tyres is internationally recognized as the No.1 tire manufacturer in the world. The company provides bias tires, radial tires, and tubes for aviation customers around the world, in a range of applications including commercial and regional airlines, general aviation and military aviation. 

MICHELIN® AIRSTOP® Aircraft Tire Inner Tubes provide long-lasting, dependable performance you can rely on in just about any operating condition. Made from exclusive Michelin butyl compound they offer  extended air retention and can sustain temperatures as low as -50°C.  In addition, they are formed without a circumferential splice, resulting in fewer joints and a more uniform tubewall thickness after inflation for optimized reliability at a minimal weight.  AIRSTOP tubes are manufactured to exacting balance tolerances (without correction), which meet or exceed all industry standards. This eliminates the need to further balance the wheel assembly in order to compensate for balance irregularities in the tube. Tube lubricant is factory applied to the tube exterior for easier installation and to help minimize foldover after installation and inflation. Comply with Aerospace Standard AS50141. Available in different sizes. Please also refer to the attached documentation.

Product Features:

Advanced Butyl Material

Exclusive Michelin® butyl compound offers excellent resistance to diffusion for extended air retention and dependable performance. Michelin® AIRSTOP® tubes help provide the same high quality seal found in Michelin® AIR X® radial tires.

Circular Extrusion Manufacturing Process

A Michelin® exclusive, Michelin® AIRSTOP® tubes are formed without a circumferential splice, resulting in fewer joints and a more uniform tubewall thickness after inflation. This helps provide optimized reliability at a minimal weight.

Built-In Balance

All Michelin® AIRSTOP® tubes are manufactured to exacting balance tolerances (without correction), which meet or exceed all industry standards. This eliminates the need to further balance the wheel assembly in order to compensate for balance irregularities in the tube.

Easy Installation

Tube lubricant is factory applied to the tube exterior for easier installation and to help minimize foldover after installation and inflation. In addition, molded vent ridges help channel trapped air back to the valve stem for easy release.

Low Temperature Performance

Michelin® AIRSTOP® tubes are designed to perform in the extreme low operating temperature of minus 50o C, so you can confidently fly in cold weather with consistent, reliable performance.

High Quality Complies with Aerospace Standard AS50141.

Brakes and related parts for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

GROVE manufactures axles and hardware for use in GROVE wheels as well as those of other manufacturers.

GROVE 500x5 wheel axles (P/N. 5013 standard and P/N. 5018 with wheel pant stub) are produced from solid 2024-T3 aluminum with anodized finish. They have a 1-15/16" Bolt Circle hole pattern and 1/4" diameter holes.

500x5 1-1/4" diameter standard axle (P/N. 5013) is the most popular axle for 500x5 wheels. It is designed to fit Grove 50-1, 51-1, 56-1, 57-1, 57-5 and Cleveland 500x5 wheels. Axle Weight: 0.92 lbs. Static Load Rating 1,250 lbs.

500x5 1-1/4" diameter axle (P/N. 5018) has built-in wheel pant stub with 1/4-28 thread. It is designed for use with Grove 50-1, 51-1, 56-1, 57-1, 57-5 and Cleveland 500x5 wheels. Axle Weight: 0.95 lbs. Static Load Rating 1,250 lbs.

Both axles require two spacers per axle (P/N. 5710) sold separately.  I.D: 1-1/4", O.D. 1-3/4", Thickness: 1/4". They can be used with 500x5 axles.

Standard axle nuts and axle bolt kits sold separately are also offered as part of GROVE product portfolio. Castle type nuts are manufactured to MIL Specification MS21025 using 4140 steel. Mild steel nuts are not acceptable for use on certificated aircraft. 1-1/4" dia. nuts for 500 x 5 axles, 1-1/2" dia. nuts for 600 x 6 axles.