HENKEL BONDERITE® is the premier brand for surface technology and process solutions that create competitive advantages across the industrial manufacturing marketplace.  Trusted for reliability, sustainability & proven results, BONDERITE® processes deliver superior cost-in-use and operational efficiency through a broad portfolio of cleaner, surface treatment, coating & lubricant materials along with engineering services.

HENKEL BONDERITE® range of surface treatment products for the Aerospace industry includes TOUCH-N-PREP® coatings pens, wipes, ready-to use coatings for light metals, liquid cleaners and paint strippers. An overview of these products is included in the Product Description section. For additional information please consult the supplied documentation.

HAMMONDS® Fuel Additives, Inc. is an innovative, industry leading manufacturer of fuel biocides and additives. BIOBOR® family of fuel additives includes BIOBOR® JF is the the most widely used and recommended fuel biocide and lubricity additive and the only available and approved biocide for use in aviation jet fuel while other BIOBOR® additives are extensively used in marine and other sectors.

BIOBOR® JF is the original, industry standard microbicide providing highly effective, proven dual-phase chemistry to eliminate the growth of harmful bacteria and fungi that contaminate fuel systems, clog filters, corrode metal surfaces and cause service interruptions. Non-corrosive and safer to handle than competitive biocides, BIOBOR® JF kills and prevents microbial growth in all fuel types, prevents microbial corrosion issues and filter plugging, works in both water and fuel phases for more effective kill while it adds lubricity and reduces wear scar by up to 20%. OEM approved biocide recommended for diesel and turbine engines and approved for military use (MIL-S53021A).

BIOBOR® MD Fuel Stabilizer and Detergent is a cutting edge over-the-road and marine fuel additive engineered to enhance fuel performance, increase lubricity and lower exhaust emissions. Cetane levels are raised for easier cold starting, fuel lubricity and combustion is increased, while the entire fuel system is cleaned of sludge. These advantages result in more power and torque with less fuel-related downtime and maintenance costs.

BIOBOR®  EB Alcohol free Gasoline Performance Enhancer is a specifically formulated additive for gasoline and ethanol fuel blends which helps combat the negative effects of ethanol in fuel tanks and engines while increasing engine performance, efficiency and fuel stability. It contains 2.5 times the EPA-required detergent and provides an “A” rating in NACE corrosion testing. BIOBOR®  EB supports engines' better performance and more power with increased fuel economy, while eliminating the problem of fuel phase separation. Prevents fuel phase separation and corrosion, cleans engine, injectors and valves, increases fuel efficiency, adds lubricity, protects pistons, o-rings, fuel lines and seals, stabilizes fuel for up to 18 months, provides easy start after long-term storage, 

BIOBOR® DC+Cetane Corrosion Inhibitors & Lubricity Additives are multifunctional diesel fuel conditioners offered in both summer and winter blends. They provide increased cetane, fuel stability, lubricity, detergency and water control. BIOBOR® DC+Cetane raises cetane, improves fuel economy & cold starting, reduces exhaust emissions and smoking, prevents sludge and asphaltene issues, decreases filter plugging, extends storage life of fuel, reduces injector and engine wear scar, cleans injectors, improves fuel economy, reduces power loss, disperses moisture and prevents water accumulation and corrosion.

For additional information please refer to the supplied documentation. 

ZET-CHEMIE® brand relates to a broad range of lubricants, cleaners and corrosion protection products for metal processing developed, manufactured and distributed by by ZET-CHEMIE GmbH for 30 years.

ZET-CHEMIE® water-miscible cooling lubricants are based on mineral oil-containing emulsion concentrates or mineral oil-free solutions. They have been used many years successfully for processing all kinds of materials. Their cutting and grinding oils are based on mineral or syntethic base oils and can be used in both chip and non-cutting metal machining processes. 

ZET-CHEMIE® corrosion protection products provide plants and components with the best corrosion protection depending on the application requirements.

ZET-CHEMIE® metal cleaners effectively address requirements for cleanliness of components in metalworking. 

ZET-CHEMIE® range of industrial lubricants can be used in a wide range of applications. 

HLP hydraulic oils feature good demulsifying properties, high stability against ageing and wear protection. They correspond to DIN 51524 Part 2. Available in the viscosity range ISO 2 – 150. HLP-D hydraulic oil conforms to DIN 51524 Part 2 with excellent detergent and dispersion features, plus wear protection. Available in the viscosity range ISO 68 – 150. 

CLP high-performance industrial gearbox oils are suitable for all industrial applications. They correspond to DIN 51517 Part 3. Their load stage is greater than 12. Available in the viscosity range ISO 5 – 680.

CGLP sliding track lubricating oils are suitable for tracks and guide rails. Their good demulsifying properties prevent them mixing with cooling lubricants. Correspond to DIN 51502 CGLP. Available in the viscosity range ISO 32 – 460.

VDL ZET-compressor oils with low evaporation losses and high stability against ageing conform to DIN 51506 VDL. Used in reciprocating and rotary lobe compressors according to the manufacturer’s instructions. Available in the viscosity range ISO 68 – 150. 

ZET-CHEMIE®  paraffin-based machine oils can be used for lubricating spindles in tooling machines. Transparent and resistant to oxidation. Available in the viscosity range ISO 2 – 32. 

ZET-CHEMIE® product portfolio also includes multi-purpose, fluid, bearing, high temperature and silicon greases in all NLGi classes and all container sizes from cartridges through to drums.Also car oils for petrol or diesel engines and trucks with EURO IV emission limits.

For additional information please refer to the supplied documentation.

BURNDY® LLC is an electrical connector solution provider manufacturing connectors, fittings and installation tools for electrical utilities, commercial, industrial, and maintenance companies. The company has been acquired by HUBBELL Incorporated a designer manufacturer and supplier of electrical and electronic products for non-residential and residential construction, industrial, and utility applications.

BURNDY® PENETROX™ is a family of oxide-preventing compounds (complexes) used for inhibiting oxidation or corrosion, producing poor initial contact resistance and for correcting electrical junction between metal parts such as conductors. All BURNDY® PENETROX™ complexes consist of homogeneously suspended metal particles that improve electrical conductivity and increase the integrity of the contact providing improved connections whether for copper or aluminum compression and bolted connectors. BURNDY® PENETROX™ product range includes:

PENETROX™ A, petroleum-based complex with equally suspended zinc particles. UL Listed to 600 volts and used for contacts such as aluminum to aluminum, aluminum to copper and aluminum conduit threads. It is not advised to use with rubber or thermoplastic insulated conductors.

PENETROX™ A-13, synthetic-based complexes with suspended zinc particles. Suitable for aluminum to aluminum, aluminum to copper contacts and aluminum conduit threads. It can be used with rubber or thermoplastic. Penetrox A-13 is UL Listed for all voltages.

PENETROX™ E, synthetic-based complex consisting of equally suspended copper particles. Used for copper to copper contacts, copper threads and all grounding applications. UL Listed. 

PENETROX™ HT, synthetic silicone based complexes with equally suspended zinc and nickel-aluminum combination particles. Used for aluminum to aluminum contacts. Penetrox HT is advised for use with high temperature ACSS and ACCC connectors. They are not UL Listed.

For more information please refer to the supplied documentation.

ASG CORPORATION ASG KUBER brand relates to an extensive product portfolio offering solutions for applications in the Defence, Aerospace, Marine Ground, Automotive, Rail and Industrial sectors, including parts, tools, lubricants, lighting, batteries and others.

ASG KUBER MIL-R-25134 B Paint Remover & Lacquer Solvent is a thickened, non phenolic aircraft paint stripper which meets the requirements of BOEING Document D6-17487 and MIL-PRF-25134 C. MIL-R-25134 B is a viscous liquid developed to remove multiple coats of paint. It clings to vertical as well as the underside of horizontal surfaces. MIL-R-25134 B can be applied as received by brushing or spraying. It is specially designed to remove lacquer and enamel coating finishes from metal surfaces of aircraft or other surfaces while it can also be used for stripping various types of paints such as varnish, zinc chromate primer, epoxy, polyurethane, etc.

Allow MIL-R-25134 B sufficient dwell time for thorough loosening or blistering of the paint. When paint is loose, thoroughly agitate all areas with a stiff bristle brush. The complete removal of the paint residues is accomplished with high pressure, high volume, cold water or with a steam cleaning machine. Normally one coat of MIL-R-25134 B is sufficient to remove more than one paint coating. Where multicoat systems have to be removed, it may be necessary to use more than one application of MIL-R-25134 B.

Product Features & Benefits

Safe to all metals.

Very effective, normally removes more than one coating of paint.

Non-flammable.

Free of phenolics.

Easily rinsed with cold water.

Can be applied by brush or non-atomizing spray methods.

Used as received (Ready-To-Use). No mixing or dilution required.

Used at room temperature.

SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance. 

SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.

SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.

HUNTSMAN Advanced Materials is a leading global material solutions provider with a product portfolio of adhesives, composites and formulation products meeting demanding engineering specifications and customer-specific needs across a wide variety of industrial and consumer applications. HUNTSMAN ARALDITE® adhesives and ARADUR® curing agents form part of the company epoxy systems widely accepted and used in many industries.

For over 40 years, HUNTSMAN ARALDITE® adhesives have been the adhesive range of choice in a huge variety of industry sectors ranging from aerospace to sports goods. In recognition of the diversity of today’s industrial manufacturing and the many new materials available for product design, Huntsman offers an extensive range of ARALDITE® adhesives to meet your varied and exacting needs. The ARALDITE® brand encompasses high-performance epoxy, acrylic, and polyurethane adhesives and high-performance specialty epoxy and benzoxazine resin systems. ARALDITE® adhesive covers a broad range of applications and offers both production and performance benefits to industrial, consumer and construction markets.

HUNTSMAN ARALDITE® specialty thermoset resins are supplied in liquids or solids, and in a range of viscosities, functionalities and epoxy equivalent weights for a wide range of industrial applications, while ARALDITE® specialty epoxy resins are typically based on bisphenol-A, bisphenol-F, phenol novolacs, cresol novolacs, amino phenol, methylene dianiline, cycloaliphatics, and isocyanuric acid.

HUNTSMAN ARADUR® curing agents are supplied in liquid or solid form and can be used in conjunction with ARALDITE® epoxy resins to achieve a broad range of thermal, mechanical and electrical properties. This complete line of high-performance curing agents includes reactive polyamides, polyamido amines, aliphatic amines, cycloaliphatic amines, aromatic amines, anhydrides and novolacs.

HUNTSMAN ARADUR® markets & applications: Paints & Coatings, Wind, Aerospace, Electronics, Electrical Engineering, Composites, Construction, Adhesives.

For additional information on  ARALDITE® adhesives and ARADUR® curatives please consult the Product Description section, the supplied documentation or contact us.

AEROSHELL® produces a range of mineral and synthetic hydrocarbon hydraulic fluids, lubricating fluids and preservatives supporting airraft systems' operation and longer preservation.  A non-exhaustive list of offered products is presented below. Additional information is available in the Product Description section. Due to the continuous expansion of our offered product portfolio some AEROSHELL® products may not be listed yet in our Web Platform but they may still be offered through our supply network. Please contact us for additional information or assistance.

AEROSHELL® Fluid 3, general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. 

AEROSHELL® Fluid 12, synthetic ester oil used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. Particularly suitable when an oil with a low evaporation rate is required at high and low temperatures. Approved to MIL-L-6085C.

AEROSHELL® Fluid 31, synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. Approved to MIL-PRF-83282D.

AEROSHELL® Fluid 41, mineral oil based  "super clean" hydraulic oil manufactured to a very high level of cleanliness and possesses improved fluid properties. It is suitable for use with brake and hydraulic systems with synthetic rubber seals.

AEROSHELL® Mineral Fluid 5M-A, highly refined, medium viscosity mineral oil with an extreme pressure additive and additives for good oxidation and corrosion protection. No longer produced. Limited availability till stock exhaustion. A possible alternative could be NYCO Nycolube 3525 meeting the same specification MIL-PRF-6086F.

AEROSHELL® Fluid 61, synthetic hydrocarbon base hydraulic fluid specifically inhibited to provide excellent oxidation stability for the oil. Approved to MIL-PRF-46170 Type I.

AEROSHELL® Fluid 602, synthetic hydrocarbon coolant fluid for aircraft electronics. No longer produced. Limited availability till stock exhaustion. Consider CASTROL® BRAYCO™ 889 meeting same specification MIL-PRF-87252E .

AEROSHELL® Fluid 71, preservative mineral hydraulic fluid of improved cleanliness. It is composed of a mineral base oil with an additive package which results in a product with excellent corrosion preventative properties as well as excellent oxidation stability, and good anti-wear characteristics.

EXXONMOBIL® MOBIL™ AERO Series Aviation Hydraulic Fluids includes AERO HFA, HF, and HFS hydraulic fluids offered for aircraft systems where use of hydrocarbon hydraulic fluids is required. 

They are low viscosity, high VI (viscosity index) fluids with excellent low temperature properties, good anti-wear performance, and good chemical stability.

MOBIL™ AERO  HFA is a premium quality fluid that meets the requirements of the U.S. Military specification MIL-H-5606A (obsolete). It has a very high VI and is suitable for use at temperatures down to -54 ˚C (-65 ˚F). While this quality fluid is no longer used by the US Military, it is still used in some older, small private, and small commercial aircraft. It is also used in industrial and commercial equipment requiring good fluidity at very low temperatures, where MOBIL™ AERO  HFA provides long, trouble-free service over a wide range of

operating conditions.

MOBIL™ AERO HF is a premium quality fluid that is approved against the most current version of U.S. Military specification MIL-PRF-5606. It has physical properties very similar to MOBIL™ AERO HFA, and also meets “super-clean” requirements required by modern aircraft hydraulic systems. It is intended primarily for military aircraft. It is also used as a hydraulic fluid for small private and small commercial aircraft, and as a strut fluid in landing gear of large commercial aircraft. It is approved as a NATO Code Number H-515 fluid.

MOBIL™ AERO HFA and HF are composed of mineral oil base stocks and contain shear-stable VI improvers.

MOBIL™ AERO HFS is a synthetic polyalphaolefin lubricant that is approved against the most current version of U.S. Military specification MIL-PRF-83282. It does not contain a VI improver. It is designed for use at temperatures down to -40˚C (-40˚F). It provides better flammability and volatility, improved stability, but has a higher viscosity at low temperature than MOBIL™ AERO HF. It meets the “super-clean” requirements. It is intended primarily for US Military aircraft. It is approved as a NATO Code Number H-537 fluid.

For additional information please consult the supplied documentation.

ANDEROL® ROYCO® brands  of LANXESS Corporation are global leaders in lubricants with a diverse portfolio of engine, turbine,marine oils, gear,pump and bearing oils, greases, hydraulic, compressor, aviation, finished, metal working and general industrial fluids, specialty and Mil-SPEC lubricants and base stock. ROYCO® hydraulic, coolant & other fluids are offered in different packings (1 US quart cans, carts of 24 1 US cans,5 USG pails,55 USG drums, etc.).

ROYCO® 308CA  General purpose, Water-Displacing Lubricating Oil and Preservative. Meets all requirements of MIL-PRF-32033.

ROYCO® 602 Cooling Hydrogenated Polyalphaolefin Syn Hydrocarbon Fluid. Composed of a highly branched, compact and very stable synthetic hydrocarbon (polyalphaolefin,PAO). 

ROYCO® 634E Advanced Weapons Cleaner, Lubricant & Preservative. Meets MIL-SPEC MIL-PRF-63460 rev. F.

ROYCO® 756/756A Mineral Oil Based Hydraulic Fluid for Aircraft, Missiles and Ordnance.

ROYCO® 757 Low Viscosity Mineral Based Fluid for use as an operational fluid for missile systems, aircraft, and Unmanned Aerial Vehicles (UAV).

ROYCO® 770 Synthetic Fire Resistant Hydraulic Fluid. Super clean synthetic hydraulic fluid for use in tank and howitzer recoil mechanisms and hydraulic systems, snow removal, earth moving and heavy duty construction equipment, and industrial robotic hydraulic systems.

ROYCO® 782 Synthetic Fire Resistant "Super Clean" Hydraulic Fluid for severe duty military and industrial equipment.

ROYCO® 783 Mineral Based Preservative Hydraulic Fluid recommended for use in aircraft, missile, and ordnance systems using synthetic sealing material as well as heavy duty construction equipment, and industrial robotic hydraulic systems.

ROYCO® 950 Calibration Fluid specifically curated for fuel system components used in both reciprocating and gas turbine aircraft.

ROYCO® HF-825 Acryloid Synthetic Assembly Fluid & O-Ring Lubricant.  A concentrated solution of methacrylate polymer in synthetic diester based oil providing lubricity, and a "tacky" film.

ROYCO® LGF Landing Gear & Strut Fluid. A mineral oil based hydraulic fluid designed specifically for use in aircraft landing gear systems shock struts and other fluid dampening systems. 

ANDEROL® ROYCO® and NYCO oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. Please contact us for additional information and assistance.

HENKEL LOCTITE® is the world’s leading brand for adhesives, sealants and surface treatments. LOCTITE® Aerospace product portfolios include HYSOL® structural adhesives  and film systems for aircraft and composite repair, aerospace potting solutions and Freketo mold release agents for the aerospace composites industry. LOCTITE® HYSOL® Aerospace adhesives are used by all major aerospace manufacturers including Boeing Commercial Aeroplanes Group and provide superior integrity to aircraft structures without added weight and ensure durable, tough bonding in composite and metal surfaces. Structural adhesive applications include joint sealing, magnet bonding, metal bonding, multiple surface bonding, noise, vibration, and harshness (NVH), plastic and composite bonding, potting and encapsulating and others.

AEROSHELL® brand relates to one of the most comprehensive and proven ranges of aviation lubricants in the aviation lubricants market worldwide. AEROSHELL® lubricants include aircraft piston and turbine engine oils, airframe and wheel-bearing greases, hydraulic fluids,  preservatives and other fluids. AEROSHELL® aviation lubricants are available in in different packaging options such as 55 gallon drums, 5 gallon pails, 1 US quart cans and cartons with 24 1 US cans each. A brief description of AEROSHELL® aviation lubricants is included in the Product Description section. Some of AEROSHELL® lubricants are already offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the supplied brief product catalogs and product descriptions,  the individual product presentations and corresponding documentation or contact us.

SOCOMORE® produces waterbased and gel type aerospace cleaners which can be used for cleaning of aircraft exteriors and parts.  MAGCHEM® is a sister company of SOCOMORE® producing solutions for the preparation protection of metal surfaces or composite materials in the construction and maintenance of the transport industries including solutions for aerospace cleaning, surface preparation and metalworking processes. MAGCHEM® product range includes all-purpose cleaners, liquid detergents, paint removers, degreasing solvents, deoxidizers, and others.

For additional information and specifications please refer to the supplied documentation.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates. CHEMETALL® ARDROX® brand is the leading brand for aerospace surface solutions including paint and scale removers, exterior aircraft & gas turbine engine compressor cleaners, corrosion inhibiting and non-destructive testing protective compounds for both aircraft and aero engines and materials.

CHEMETALL® ARDROX® Corrosion Inhibiting Compounds' (CIC) range includes AV 8, AV 15 (aka DINITROL AV15), general purpose AV 25, the most versatile AV 30 and AV 40.  They are water displacing, long-term corrosion inhibitors highly  penetrating  areas exposed to severe corrosion conditions and combining good penetration properties with excellent corrosion inhibiting characteristics and a low applied film weight. Their viscosity is optimized to ensure an effective protective coating and promote penetration into otherwise inaccessible areas of the airframe. Applied as a coating to protect metals in airframe structures, on painted and unpainted surfaces, and in aerospace components to safeguard metals from corrosion. In areas exposed to severe corrosion conditions AV 8 should be overcoated with AV 100D - a heavy duty, waxy, firm film CIC.

CHEMETALL ARDROX® CIC are offered in different packaging options and comply with different specifications including Boeing BMS, MIL-PRF-16173, McDonnell Douglas DMS, Airbus AIMS and others. They are classified as HAZMAT Hazardous Materials UN Number: UN1139 - UN Class: 3.

CHEMETALL ARDROX® 3140 Corrosion Preventative contains film forming agents, antioxidants and corrosion inhibitors in a refined hydrocarbon solvent base. Provides long term protection for raw materials, sub-assemblies and finished components, which are to be stored or used in corrosive environments. 

CHEMETALL ARDROX® 6367 Turbine Engine Cleaner is a liquid concentrate which consists of an aqueous blend of biodegradable surfactants and corrosion inhibitors formulated to clean the compressor sections of gas turbine engines. It is solvent free and removes deposits, oils and their oxidation products in the compressor area. Contains corrosion inhibitors providing protection against corrosion for up to 3 days during engine standstill times. Does not contain any EDTA, NTA or their salts. Regular cleaning with Ardrox® 6367 helps maintain peak engine efficiency and reduces maintenance and fuel cost. Ardrox® 6367 is compatible with recognized antifreeze materials used during cold weather cleaning. Approved for use in a range of turbine engines including CFM56 CP5060 , GE SPM 70-80-04, Ref. C04-140, P&W SPM 70-12-00, SPMC 87-10A, Rolls Royce CSS 260 and others. Offered in different packaging options including 25-liter pails and 55 USG drums.

For additional information please consult the Product Description section or the attached documentation.

TOTALENERGIES (formerly TOTAL)  has developed a comprehensive range of Hydraulic Oils included in HYDRANSAFE product family. 

HYDRANSAFE HFA E3 and HFA S5 are intended for use in hydraulic systems in Aviation, Steel, Metalworking, Energy, Chemicals, Food processing, Textile, Automotive Manufacturing, Wood and Paper, Cement & Materials, & Mining sectors. Can be used on hot pressing machines and systems specially designed for low-viscosity aqueous fluids. Operating temperatures: +5 °C to +55 °C. HYDRANSAFE HFA E3 features an excellent stability overtime, good antiwear properties, excellent anti foam properties, good anti-corrosion, anti-rust properties even with a soft water, and good resistance to bacterial growth. HYDRANSAFE  HFA-S5 solution has a very low foam tendency and is compatible with the usual type of elastomers used in HFA type of hydraulic installations (ISO 6072 NBR and FKM). Provides excellent protection against corrosion to metals normally used in hydraulic systems (ISO IP 287) and features a high resistance to bacterial and fungal growth. Its durability reduces maintenance - with service intervals longer than mineral oil based HFA emulsions (type HFAE fluids).

HYDRANSAFE HFC-E 46 & HFC-E 68 are non flammable (fire resistant) & biodegradable  water based hydraulic fluids, boosted in antiwear and anti corrosion additives to match mineral based performances on pump tests and replace standard mineral oils with equal equipment protection. Both are intended for use in applications in Steel, Automotive Manufacturing, Mining, Aluminium, Construction Equipment and Mining industries. Designed to work on all kind of hydraulics pumps in various conditions, in mobile and stationary equipment. Ultimately biodegradable to facilitate usage in sensitive areas such as undergournd mining, agriculture, tunelling etc. they provide superior fire protection compared with standard HM or HFDU oils without compromising mechanical performances. They absorb water enabling usage in environments subject to high water contamination.

HYDRANSAFE HFDU 46, HFDU 68, and HFDU LC 168 Biodegradable hydraulic oils are recommended in the event of incidental leaks into the environment. They feature  considerable fire resistance, and exceptional lubricating properties which guarantee a substantial reduction in wear, and therefore a longer service life of the hydraulic components. They exhibit a high flash point and high spontaneous ignition temperature, low pour-point providing good performances at low temperature, very good anticorrosion properties enhanced service life, and a very high natural viscosity index guaranteeing a viscosity constantly adapted to the temperature range in which the fluid must be used. Operating temperature: -10 °C to +70 °C on a continuous basis, +120 °C at peak periods.

For additional information please consult the Product Description section and the supplied documentation.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient . With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

Petroleum distillates include a range of products such as mineral oils, naphtha solvents, heavy fuel oils, waxes, benzenes and others used in many industrial and other applications. They are offered as part of our own labelled (AVIATIONEU NEW ERA) product portfolio or as OEM products (separately listed).

Naphtha Solvents are chemical product comprised of volatile and extremely flammable liquid hydrocarbons  derived from the refining of crude oil but can also be produced from natural gas condensates or petroleum distillates. Naphtha solvents are very strong and versatile, often used in hydrocarbon cracking, laundry soaps, and cleaning fluids among other applications. Those conforming to Mil-Spec TT-N-95 or its latest Rev. B (TT-N-95B) are aliphatic naphtha acrylic cleaning solvents available in Type I or Type II for use in organic coatings and as a cleaner for acrylic plastics. Usual packings include 1 USG cans, 5 USG pails or 55 USG drums.

EASTMAN SKYDROL™ Aviation Hydraulic Fluids were developed to meet the requirements established by manufacturers and backed by recognized experts in phosphate ester technology. SKYDROL™ was the first fire-resistant hydraulic fluid in the industry and today remains the most advanced aviation hydraulic fluid. SKYDROL™ aviation hydraulic fluids include:

SKYDROL™ PE-5,  a Type V, fire-resistant hydraulic fluid offering the longest fluid life of any phosphate ester fluid available today, even under high moisture conditions. Key benefits include less frequent fluid replacement, reduced disposal volume and lower environmental footprint. Meets BMS3-11P Type V, Grade A & C specification.

SKYDROL™ 5, a lighter-weight hydraulic fluid due to its lower density resulting in fuel savings.  SKYDROL™ 5 is the first aviation hydraulic fluid demonstrating erosion-resistance at higher temperatures leading to decreased maintenance and downtime. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ LD-4, the world’s best-selling Type IV aviation hydraulic fluid, featuring low density, valve erosion prevention, and deposit control. Erosion resistance is made possible by a breakthrough anti-erosion additive and acid scavenger included in the formulation. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ 500B-4, the only commercially available standard-density aviation hydraulic fluid offering additionally improved erosion resistance, as it contains the same anti-erosion additive and acid scavenger as LD-4. Meets BMS3-11P Type IV, Class 2 specification.

For additional information please refer to the supplied documentation or contact us.