AEROSHELL® 100 Series SAE 50 Grade Aviation Piston Engine Oils are  straight mineral oils blended from selected high viscosity index base oil. They are offered as AEROSHELL® 100 mineral break in oil with no additives, AEROSHELL® W100 mineral ashless dispersant oil for normal use and  AEROSHELL® W100 PLUS mineral ashless dispersant oil with a friction modifier/anti-wear additive package. 

The specially blended high viscosity index base oil in AEROSHELL® 100 oils has been designed to provide effective protection to engine components compared to conventional mineral oils. Intended for use when an oil without a dispersant additive is required during the break-in of  new aviation piston engines or those recently overhauled.They meet the SAE specification J-1966 Grade 50. 

AEROSHELL® W oils were the first non-ash dispersant oils to be used in aircraft piston engines. They combine nonmetallic additives with selected high viscosity index base stocks to give exceptional stability, dispersancy and anti-foaming performance. These additives leave no metallic ash residues that can lead to deposit formation in combustion chambers and on spark plugs, which can cause pre-ignition and possible engine failure.AEROSHELL® W100 oil includes very small amounts of pour point depressant to improve fluidity at very low temperatures and an anti-oxidant. This helps ensure complete confidence and peace of mind knowing that your aircraft will perform reliably in between scheduled overhauls. Approved to SAE specification J-1899 Grade 50. 

AEROSHELL® W100 Plus single grade oils combine the single grade, ashless dispersant performance found in AEROSHELL® Oil W100 and the anti-wear/anti-corrosion additives of AEROSHELL® Oil W15W-50 Multigrade. They are approved for all aviation civil aircraft piston engines. Approved to SAE specification J-1899 Grade 50.

AEROSHELL® 100 Series oils have military qualification approvals. Common packing options include 1 US Quart bottles, cases of 6  or 12 1 US Quart bottles, jugs of 5 liters, pails of 5 US Gallons, and drums of 55 US Gallons. Please also refer to the attached documentation.

 NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to our AEROSHELL® Aviation Lubricants Product Overview presentation or contact us for additional information or assistance on non listed products.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

For more than 50 years, PPG AEROSPACE® – PRC-DeSoto® has been a leader in the development of products fundamental to aerospace manufacturing, maintenance, and repair. The company manufactures and provides a unique group of products including aircraft windshields and windows to the commercial, regional, military and general aviation segments as well as aircraft primers, coatings and sealants for aircraft structures used in aviation and milirary applications. In addition, high performance Industrial Adhesives and Sealants  are also offered to provide protection from fuel and petroleum exposure as well as sealants for Telecom and Utility applications.

PPG AEROSPACE® – PRC-DeSoto® products are offered in different classes, specifications, application times and convenient container options including SEMCO Semkit® packages containing both the base and accelerator in one pack.

3 classes are generally used for the classification of sealants (A, B and C) although an S class does apply in some cases where a sealant can be sprayed.

Class A – Brush application, generally used on fasteners

Class B – Thicker consistency, used for fillet and injection seals

Class C – Thinner than Class B, used for fay sealing

Application times are expressed in hours (2 indicating 2 hours 1/2 indicating half an hour).

PPG AEROSPACE® integral fuel tank sealants for aerospace applications are high-performance products designed to provide long-lasting protection and sealing for aircraft fuel tanks. These sealants, such as the PR-1422 and Pro-Seal 890 were the first fully jet fuel resistant sealants. They offer excellent adhesion, flexibility, and resistance to fuels, oils, and other chemicals. They ensure leak-proof integrity under various temperature and pressure conditions, contributing to the overall safety and efficiency of aircraft operations. 

PPG’s Aircraft Fuel Tank Sealants are included in this presentation while respective Aircraft Fuselage, Firewall Sealants and Corrosion Inhibitive Sealants and Coatings are separately presented.

For additional information on offered products please consult the Product Description Section and the supplied documentation.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® NAFTOSEAL® polysulphide sealants are specifically designed to meet the challenging  requirements of the aerospace industry for multi-purpose applications. The OEM and maintenance sectors both  benefit from a full range of easy-to-use and approved aircraft sealant technologies. The application characteristics of NAFTOSEAL® enable higher production rates. In addition NAFTOSEAL®  sealants offer  eco-friendly properties: all components are chromate-free, solvent-free or very low in solvent content. 

Key Features & Benefits:

 Free of chrome and solvents/low in solvent content

 Low temperature flexibility

 Fast tack-free and cure times for high production rates

 Good adhesion to various substrates

 Excellent chemical resistance

 High elasticity and resilience

 Good thixotropic properties, no slump

 Low and medium density products available

 Applications:

CHEMETALL® NAFTOSEAL® multi-purpose aircraft sealants can be used for all aircraft applications requiring sealants, such as fuel tank, fuselage, floor panels and aerodynamic smoothing. Adhesion promoters, tool and equipment cleaning technologies and mixing devices round-off our portfolio and cover all aspects for an efficient and safe sealant application.

Please refer to the supplied documentation for features and specifications of individual products.

EXXONMOBIL® MOBIL® offers a complete range of  lubricants specifically designed to lubricate wind turbines that help protect their critical parts, safeguarding their continuous operation. They provide excellent equipment  protection and oil efficiency in a wide range of conditions, including terrestrial, offshore, dry or liquids and at high or low temperatures. MOBIL® industrial lubricants are used in more than 40,000 wind turbines worldwide and they are suitable for many leading wind turbine manufacturers including Vestas, Repower, Suzlon, Enercon, GE Energy and Nordex. The range includes lubricant and gear oils for the main gearbox, to greases for the main pitch, yaw and pitch bearings and generator bearings, and hydraulic oils. 

For additional information please consult the Product Description section and the supplied documentation.

TIODIZE Co., Inc. is an advanced technology company specializing in the development, manufacturing and application of composite products and advanced coatings. Their composite product range includes FIBER/LITE® fasteners and fastening devices maintaining high tensile, shear and fatigue strength at temperatures to 700°F and TRIBO/COMP® self-lubricating bearing materials with an unequaled wear life and a high strength to weight ratio.TIODIZE coating product portfolio includes corrosion & emissivity coatings, dry-film lubricants and anti-seize products as well as a range of Green, environmentally compliant non-hazardous cleaners and lubricants meeting EU REACH Regulation requirements for the sports, consumer and racing markets, such as their  ALUMAZITE® family of aluminum pigmented corrosion inhibiting coatings. 

TIODIZE® TIOLON® and TIOLUBE® families of products are advanced anti-friction, anti-wear, MIL-spec quality dry film lubricants for static and dynamic conditions. Their product lines include TIOLON® PTFE (Teflon®) and TIOLUBE®  MoS2 (Molidisulfide) organic and inorganic, low VOC and water based dry films suitable for different operating temperature applications.Their dry-film lubricants are utilized in almost any application that involves lubrication for friction and wear or  barriers for galling and corrosion in an increasingly broad spectrum of industries including aerospace, automotive, marine and electronics.

For more information on TIODIZE products please refer to the Product Description section and the supplied documentation.

MINERAL WAX PLANT BELWAX range of lubricants includes products for special uses outlined below:

LITOL-24 grease designed for application in friction units of wheel and tracked (crawler-type) vehicles, industrial equipment and seaborne machinery of different purpose, at operating temperatures from -40 °С to +120 °С (for shorter time periods up to 130 °С).

GRAPHITE grease intended for greasing of hard heavily loaded mechanisms (open geared wheels, threaded connections of actuator screws, jacks, spring, etc.). The temperature range of application is from -20°С to +60°С. In springs and similar devices, the grease can be used at a temperature below -20°С.

CIATIM-201 frost resistant grease designed for greasing of low-loaded friction, rolling and sliding units at temperatures from - 60°C to + 90 °C. 

KS-UNM cable lubricant for the protection of cables under conditions of warehouse storage and air storage, as well as in the process of exploitation. The lubricant guarantees protection of cables against corrosion in a climate emulation chamber under adverse conditions, not less than 30 cycles. The lubricant is thermally stable, provides a possibility of its application at a centralized system of preheating of feed to a cable-twisting machine, as well as satisfactory work conditions for maintenance personnel. In the process of application, cable lubricant KS-UNM can be used as an anti-friction agent for lubrication of wiring of steel cables, used as main cables in vertical lifting and slopping installations of rotary machines, balancers, brake units, shock tools, mining tools, parachute systems, fenders, guiding units, suspension units and other excavation equipment. In its consistency the lubricant is moderately viscous, it is applied preheated at stranding, making of cores and cables at the corresponding manufacturing plants. 

HENKEL LOCTITE® is the world’s leading brand and trusted choice for high-performance adhesives, sealants and surface treatments for manufacturing applications worldwide, from aircraft to furniture. LOCTITE® product portfolios includes an extensive range of adhesives, sealants, surface treatments, and other industrial chemicals exploiting different technologies including acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies.These technologies combined with innovations result in product solutions for adhesives, sealants and functional coatings that are essential to countless industrial applications. 

HENKEL industrial sealant applications extend from automotive, electronics, aerospace, metal, and durable goods, to consumer goods, maintenance and repair, and packaging industries. In addition to LOCTITE® product lines, HENKEL also offers an extensive poduct portfolio under TEROSON®  brand providing bonding, sealing, coating, acoustic, stiffening and reinforcing solutions for OEM transportation assembly, vehicle repair and maintenance (VRM) , industrial assemblies and building industry applications. The TEROSON® brand represents a global and scalable technology, offering extensive market and application competence for innovative, reliable and complete systems solutions tailored to customer needs, using a wide range of technologies in the form of foams, foils, tapes, patches, extrusions, baffles, membranes, and pumbable/sprayable gels and liquids.

In Aerospace, HENKEL LOCTITE® product portfolios (listed separately)  include HYSOL® structural adhesives and film systems for aircraft and composite repair, aerospace potting solutions and Freketo mold release agents for the aerospace composites industry. LOCTITE® HYSOL® Aerospace adhesives are used by all major aerospace manufacturers including Boeing Commercial Aeroplanes Group and provide superior integrity to aircraft structures without added weight and ensure durable, tough bonding in composite and metal surfaces. Structural adhesive applications include joint sealing, magnet bonding, metal bonding, multiple surface bonding, noise, vibration, and harshness (NVH), plastic and composite bonding, potting and encapsulating and others.

Several HENKEL LOCTITE® and TEROSON® products are included in this listing and briefly described in the Product Description section. For LOCTITE® HYSOL® Aerospace products please refer to the respective product presenatation.

For additional information please consult the supplied documentation or contact us for non listed items.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient. With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

The AEROSHELL® range of mineral and synthetic aviation greases are multi-functional to reduce costs and improve maintenance efficiency.

AEROSHELL® greases No. 5 and 6 are microgel thickened with mineral oil base. No 5, combines high load-carrying ability with excellent resistance to water and high temperatures. Used primarily in aircraft wheel bearings and engine accessories operating at high speeds/relatively high temperatures. No 6 is a general purpose airframe grease with outstanding low temperature torque properties and resistance to water. Used primarily in plain and anti-friction bearings on general aviation aircraft. No 14 is a leading helicopter multi-purpose, calcium soap thickened, mineral  grease inhibiting corrosion and oxidation due to its anti-rust additives.

No 7, an advanced multipurpose airframe grease and No 22, a versatile multipurpose grease, are both microgel thickened with synthetic diester/synthetic hydrocarbon oil base respectively. Both are corrosion inhibited and fortified against oxidation. No 7 is recommended for highly loaded gears and actuator screw mechanisms, instrument and general airframe lubrication while No 22 for aircraft wheel bearings, engine accessories and airframe lubrication and for anti-friction bearings operating at high speeds at high or low temperatures.

No 33 is a universal airframe grease with a synthetic hydrocarbon/ester oil base and enhanced corrosion resistance and load-carrying capacity to reduce wear and extend re-greasing intervals. Developed to satisfy almost all airframe lubrication requirements with a single grease. Like No. 58, an advanced wheel bearing grease, they are lithium thickened greases. No 64, an extreme pressure (EP) MIL-G-21164D compliant airframe grease containing molybdenum disulfide, extends  component life through its exceptional load-carrying and EP properties. Fully compatible with No 33, both can protect over 98% of the grease application points on a typical airliner.

AEROSHELL® Grease products now carry a 6 year shelf life from manufacture. These products include AEROSHELL® Grease 5, 6, 7, 14, 22, 33, 58 & 64.

NOTE: Other AEROSHELL® products such as piston engine and turbine oils and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.

PPG AEROSPACE® Corrosion Inhibitive Aircraft Sealants & Jointing Compounds include different products offered in different packings.

PPG AEROSPACE® P/S (Pro Seal) 870 Corrosion Inhibitive Sealants are two-part, manganese dioxide cured polysulfide compounds.  They have a service temperature range from -65°F (-54°C) to 250­°F (121°C), with intermittent excursions up to 275° (135°C). They act as an effective barrier against the common causes of corrosion on the aluminum alloys or between dissimilar metals. The cured sealant maintains elastomeric properties after limited exposure to both jet fuel and aviation gas. Offered in A, B & C classes.

P/S 870 Class A uncured material is suitable for application by brush in thickness up to 25 mils. It cures at room temperatures to form a resilient sealant having excellent adhesion to common aircraft substrates. Supplied in two-part kits and Semco® cartridges.

P/S 870 Class B uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits or Semkit® cartridges. 

P/S 870 Class C uncured material is designed for roller and faying surface sealing applications. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits and Semco® cartridges.

PPG AEROSPACE® Proseal P/S 890 Class A and B are aircraft integral fuel tank sealants. They have a service temperature range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). Proseal P/S 890 Class A is designed for brush and fay sealing of fuel tanks and other aircraft fuselge sealing applications. Proseal P/S 890 Class B  is designed for fillet sealing of fuel tanks and other aircraft fuselage sealing applications. The cured sealants maintain excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.  Both are two-part, manganese dioxide cured polysulfide compounds. In the case of Proseal P/S 890 Class A, the uncured material is suitable for applicaiton by brush in thickness up to 25 mils. In the case of Proseal P/S 890 Class B, the uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. Both cure at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. PPG AEROSPACE® Proseal P/S 890 Class A and B  sealants are supplied in two-part kits and Semco® cartridges.

PPG AEROSPACE® JC5A Corrosion Inhibitive Jointing Compound is a versatile one-part, non-curing compound designed specifically for the aviation industry. Engineered to prevent corrosion and moisture ingress, JC5A is ideal for safeguarding removable fasteners and assemblies. 

Please refer to the Product Description section and the supplied documentation for additional information.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.

SWAGELOK® Goop™ thread lubricants reduce installation time by easing the assembly of leak-tight thread connections for a variety of metals and alloys. Oil-based BLUE Goop® thread lubricants can be used on stainless steel, steel, titanium, aluminum, and nickel based alloys for temperatures up to 400° F (204° C). Halcocarbon based PURE Goop® can be used on titanium, stainless steel, steel, and nickel based alloys for temperatures up to 350° F (176° C) while Oil-based SILVER Goop® thread lubricants can be used on stainless steel, and high temperature alloys for temperatures up to 1500° F (815° C). Offered in different packaging options: 1 oz. (29.5 cm3) tubes (PURE/SILVER Goop®), 2 oz. (59 cm3) tubes (BLUE Goop®) and 1 lb. (450 g) cans (BLUE/PURE/SILVER Goop®). According to the selected product, they resist or prevent galling. 

SWAGELOK® Snoop® liquid leak detectors detect gas leaks in hard-to reach areas. They are non-corrosive and non-flammable. Contain corrosion inhibitor for added protection. SWAGELOK® Snoop® liquid leak detectors can be used over a temperature range of 27° to 200° F (-2° to 93° C). For lower temperatures, –65°F (–54°C) SWAGELOK® Real Cool Snoop® liquid leak detectors can be used. Offered in different containers: 2 fl oz./59 ml (Snoop®), 8 fl oz./236 ml (Snoop®/Real Cool Snoop®) and 1 gal/3.8 l (Snoop®/Real Cool Snoop®).

SWAGELOK® also offers SWAK™, PTFE Tape, and PTFE-Free pipe thread sealants. For more information on SWAGELOK® products please refer to the supplied documentation. 

AEROSHELL® Sport Plus 4  from Shell Aviation is a second generation multi-grade piston engine oil specifically designed for use in light sport and very light/ultralight aircraft 4-stroke engines in any climate. It is the first aviation oil in the market that is BRP-Rotax tested and meets Rotax RON 424 OEM specification. AEROSHELL® Sport Plus 4  is suitable for BRP-ROTAX 912, 914, 912 iS engine series. Provides enhanced anti-wear protection compared to the previous generation as well as enhanced protection and lubricity for the smooth movement of clutch and gearbox components. Can be used with both unleaded aviation and road fuels and Avgas 100LL. Integrated additives support anti–corrosion and anti-wear of critical parts, powerful anti-oxidation action, anti-foaming for engines operating with an integrated gearbox and neutralization of acid build up. 

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the general presentation of AEROSHELL® lubricants, the supplied documentation or contact us for additional information or assistance on non listed products.

LIQUI MOLY is Germany's most popular brand of motor oil. It is also one of the few full range brands in the world with more than 4,000 premium quality motor and gearbox oils, fuel and oil additives, care products, chemical problem-solvers and service products.

LIQUI MOLY MOLYGEN New Generation range of fully synthetic motor oils indicate their Molecular Friction Control (MFC) technology with their deep green visual signature. Tungsten, a key component in MOLYGEN oils, is a rare metal with an extremely high melting point used in many high-temperature applications. As an additive in LIQUI MOLY MOLYGEN oils, Tungsten leads to a significant friction reducation and a corresponding reduction of engine's wear and extension of engine life.  Less friction can also lead to reduced engine fuel consumption as less energy is required to overcome the internal losses. MFC technology in MOLYGEN New Generation oils leads to smoother engine running with optimum oil pressure, a long service life, and reduced fuel consumption and emissions. 

LIQUI MOLY MOLYGEN  New Generation motor oils are offered in some of the most common viscosities, including 0W-20, and 5W-20 through 5W-50. They are designed to meet or exceed standards including the latest from General Motors and those of BMW, Mercedes-Benz, Honda, Subaru, and more. A brief presentation of different oils in the MOLYGEN New Generation range is provided in the Product Description section. Please also refer to the supplied LIQUI MOLY Oil Guide on different applications.

Note: Supplied information is provided for reference only. For the selection of the suitable motor oil please observe the manufacturer's instructions.

LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options. 

A brief description of LUKOIL® lubricants  which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.

Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.

For more than 50 years, PPG AEROSPACE® – PRC-DeSoto® has been a leader in the development of products fundamental to aerospace manufacturing, maintenance, and repair. The company manufactures and provides a unique group of products including aircraft windshields and windows to the commercial, regional, military and general aviation segments as well as aircraft primers, coatings and sealants for aircraft structures used in aviation and milirary applications. In addition, high performance Industrial Adhesives and Sealants  are also offered to provide protection from fuel and petroleum exposure as well as sealants for Telecom and Utility applications.

PPG AEROSPACE® – PRC-DeSoto® products are offered in different classes, specifications, application times and convenient container options including SEMCO Semkit® packages containing both the base and accelerator in one pack.

3 classes are generally used for the classification of sealants (A, B and C) although an S class does apply in some cases where a sealant can be sprayed.

Class A – Brush application, generally used on fasteners

Class B – Thicker consistency, used for fillet and injection seals

Class C – Thinner than Class B, used for fay sealing

Application times are expressed in hours (2 indicating 2 hours 1/2 indicating half an hour).

Aircraft Fuselage and Access Door Sealants are included in this presentation while respective Aircraft Firewall Sealants, Fuel Tank  Sealants, Corrosion Inhibitive Sealants and Coatings are separately presented.

For additional information on offered products please consult the Product Description Section and the supplied documentation.

The SHELL® Gadus range of industrial greases (formerly SHELL® Alvania) include Gadus “S” high performance, multi purpose greases  and the latest extreme temperature “T” polyurea synthetic speciality greases designed for the most severe extreme-temperature and long-life applications.They have been designed to deliver the best value through long grease life, system efficiency, and enhanced wear protection enabling equipment operators to bebefit from Gadus greases' thickener type, oil viscosity, operating conditions and application and their NLGI grade (consistency) selecting the grease that will deliver optimum value to their operations. From greases that offer reliable performance for standard applications to specialist low noise, high-temperature and heavy-load greases,  there is a Shell Gadus product that can help to optimise your system’s efficiency and costs of operation.

For more information on SHELL® Gadus greases please refer to the Product Description section and the supplied documentation.

TOTALENERGIES (formerly TOTAL) Specialties has developed a comprehensive turbine lubricant product range to support the power generation industry (whether it’s for large frame or aero-derivative turbines) with approvals by the leading turbine manufacturers. Offered in 20-liter containers and drums of 208 liters (210 kg) each.

TOTALENERGIES PRESLIA range of turbine oils include: 

a) PRESLIA mineral high-performance turbine lubricants for regulation and lubrication circuits of gas, steam and combined cycle turbines working at high temperatures. Can also be used in centrifugal and screw compressor bearing lubrication when an oil without strong anti-wear properties is needed. These oils offer long drain intervals, simplified maintenance and  ageing protection of engines and equipment in which they are used. 

b) PRESLIA GT (ISO 32 and 46) high-running temperature resistant turbine lubricants. These oils are specially designed for the lubrication (bearing, gear boxes) and regulation of gas turbines. The use of non-conventional base stocks and unique additization provides excellent thermal-oxidative stability. Preslia GT 32 and 46 should also be considered for use in steam turbine applications that requires either an ISO 32 or 46 fluid.

c) PRESLIA SE synthetic lubricants for aero-derivative turbines. Formulated with an advanced polyolester-basestock and next generation additive technology, Preslia SE Jet (5cSt POE) provides outstanding performance in the most demanding land-based aero-derivative engine applications that require a SAE AS5780 qualified fluid. PRESLIA SE HTS (High Thermal Stability) is a High Temperature/Performance oil delivering the performance expected for aeroderivative gas turbines operating in the most difficult environments.

For additional information please consult the Product Description section and the supplied documentation.

The NYCO GREASE® range of greases includes multi-purpose or special-purpose mineral and synthetic greases for extreme applications (low and high temperatures, high speed and pressure, saline, corrosive, humid environments, etc.), compliant with civil, military aviation and industrial constraints. They are intended for use in a variety of applications such as airframe, slats, flaps, heavy loads, THS (Tail Horizontal Stabilizer), actuators, bearings, doors, landing gears, wheels, jacks, rudders, LRU (Line Replaceable Units) and also as an anti-seize or assembly compound, protection grease, etc.  NYCO GREASE® NLGI 2 grade greases commonly used in Aerospace and Defense applications with respective specifications & approvals, are outlined below. 

NYCO GREASE® GN 06 mineral grease thickened with a lithium soap for use in low speed and sliding motion parts and as an airframe multipurpose grease (doors, slaps, flaps, landing gear, etc.

NYCO GREASE® GN 10 and GN 22 general purpose airframe greases

NYCO GREASE® GN 15 general purpose aircraft lithium grease

NYCO GREASE® GN 43 an aircraft synthetic grease for instruments and ejection seats

NYCO GREASE® GN 44 a synthetic aircraft grease for weapons

NYCO GREASE® GN 45 a blend of silicone and graphite, ideal for lubrication of roller bearings, transmissions in propellers, threading, etc.

NYCO GREASE® GN 69 a heat-stable silicone oil thickened with a non-melting gelling agent for electrical insulation.

NYCO GREASE® GN 148 a multi-purpose airframe and landing gear grease containing excellent anti-corrosion additives

NYCO GREASE® GN 155 a heavy duty naval, sea-water resistant grease for use in lubrication of bearings, ropes, pins and joints exposed to sea-water wash-out, dust, temperature and heavy loads – including components fully immersed in sea-water

NYCO GREASE® GN 25013 a multipurpose extreme temperature airframe grease, based on silicone oil, thickened with polytetrafluoroethylene and reinforced with anti-corrosion and antioxidant additives

NYCO GREASE® GN 3058, based on lithium complex, intended for use in wheel bearings, propeller bearings and highly loaded landing gear areas

NYCO also offers 65 Vaseline, a stiff, rather tacky petrolatum (heavy mineral paraffin wax), with a melting point in the range 45 to 60°C. It is not aggressive to any metal or alloy and can be used for anti-seize protection, assembly and dismantling of aircraft and helicopter parts and seals, temporary rust prevention in workshop and battery terminals protection. Approvals/Qualifications: AIR 3565/A, VV-P-236, CML 03FAB1, ATR CML 04-012, CFMI CP 5070, Snecma DMR 75-103, Boeing CML D00504, Airbus Helicopters CM119.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in Russian aircraft meeting the corresponding manufacturers' specifications. Most of their products can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products.

AEROSHELL® Turbine Oil 308 is a 3 mm2/s synthetic ester oil incorporating additives to improve resistance to oxidation and corrosion and to minimise wear. It was developed specifically for use in particular models of aircraft turbo-prop and turbo-jet engines for which a MIL-PRF- 7808 (formerly MIL-L-7808) oil is required. AEROSHELL® 308 turbine oil contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.

Product Specifications/Approvals:

US – Approved MIL-PRF-7808L Grade 3

Nato Code O-148

Joint Service Designation – Equivalent OX-9

Airbus Helicopters CM  CM0113

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to our AEROSHELL® Aviation Lubricants Product Overview presentation or contact us for additional information or assistance on non listed products.