DONALDSON® COMPANY INC. is one of the largest filtration manufacturers in the world, providing filters and filtration components for a wide range of applications including commercial airliners, military applications and general aviation aircraft, agriculture and forestry, construction, mining,  truck, and bus manufacturers as well as other markets.

DONALDSON® AEROSPACE FILTRATION (AFS) cleaners/degreasers and oils are used in inlet barrier filters to bring the filters back to full capacity after their cleaning process. Offered in 1 US gallon and 5 US gallon sizes. Filter Cleaning Kits are also offered containing 1 US gallon of AFS Oil, 1 gallon of AFS Cleaner/Degreaser, a 16-ounce bottle and spout for re-oiling, a cleaner/degreaser sprayer, and seamer pliers (2-inch and 6-inch).

For additional information please consult the supplied documentation.

The NYCO GREASE® range of greases includes multi-purpose or special-purpose mineral and synthetic greases for extreme applications (low and high temperatures, high speed and pressure, saline, corrosive, humid environments, etc.), compliant with civil, military aviation and industrial constraints. They are intended for use in a variety of applications such as airframe, slats, flaps, heavy loads, THS (Tail Horizontal Stabilizer), actuators, bearings, doors, landing gears, wheels, jacks, rudders, LRU (Line Replaceable Units) and also as an anti-seize or assembly compound, protection grease, etc.  NYCO GREASE® NLGI 2 grade greases commonly used in Aerospace and Defense applications with respective specifications & approvals, are outlined below. 

NYCO GREASE® GN 06 mineral grease thickened with a lithium soap for use in low speed and sliding motion parts and as an airframe multipurpose grease (doors, slaps, flaps, landing gear, etc.

NYCO GREASE® GN 10 and GN 22 general purpose airframe greases

NYCO GREASE® GN 15 general purpose aircraft lithium grease

NYCO GREASE® GN 43 an aircraft synthetic grease for instruments and ejection seats

NYCO GREASE® GN 44 a synthetic aircraft grease for weapons

NYCO GREASE® GN 45 a blend of silicone and graphite, ideal for lubrication of roller bearings, transmissions in propellers, threading, etc.

NYCO GREASE® GN 148 a multi-purpose airframe and landing gear grease containing excellent anti-corrosion additives

NYCO GREASE® GN 155 a heavy duty naval, sea-water resistant grease for use in lubrication of bearings, ropes, pins and joints exposed to sea-water wash-out, dust, temperature and heavy loads – including components fully immersed in sea-water

NYCO GREASE® GN 25013 a multipurpose extreme temperature airframe grease, based on silicone oil, thickened with polytetrafluoroethylene and reinforced with anti-corrosion and antioxidant additives

NYCO GREASE® GN 3058, based on lithium complex, intended for use in wheel bearings, propeller bearings and highly loaded landing gear areas

NYCO also offers 65 Vaseline, a stiff, rather tacky petrolatum (heavy mineral paraffin wax), with a melting point in the range 45 to 60°C. It is not aggressive to any metal or alloy and can be used for anti-seize protection, assembly and dismantling of aircraft and helicopter parts and seals, temporary rust prevention in workshop and battery terminals protection. Approvals/Qualifications: AIR 3565/A, VV-P-236, CML 03FAB1, ATR CML 04-012, CFMI CP 5070, Snecma DMR 75-103, Boeing CML D00504, Airbus Helicopters CM119.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products.

A wide range of grease fittings (aka zerk fittings or grease nipples) are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. Sourced from quality manufacturers, they are competitively priced and can be furnished in different head types  (conical, button or flush head, drive-in or self-forming), straight or angled heads (30°, 45°, 65°, 67.5°, 90°) and thread sizes in metric or inch systems, depending on the selected fitting. Fittings are sold in pieces but mostly in packs a with specified number of fittings indicated after the letters "PK" in the product reference number (SKU). Fitting kits are also available with assortments of different fittings.

Our AVIATIONEU NEW ERA conical head grease nipples comply with DIN 71412, SAE J534 & IS 4009-2 standards. Hardness for nipple head: Min.550 HV. They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C,SAE 12L13 or stainless steel  303 & 316 with different surface finishes (clear/yellow/olive green zinc plated). Available with straight or angled nipples, tapered or parallel threads in different sizes:

Metric: from M5x0.8 to M16x1.5

British Standard Pipe (BSP): from 1/8"-28 to 3/8"-19

U.S. National Pipe Thread (NPT/PTF): from 1/8"-27 to 1/4"-18

U.S. ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series: from 1/4"-28 to 3/8"-24

Our AVIATIONEU NEW ERA button type round head grease fittings comply with DIN 3404 & IS 4009-1 standards.They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C,SAE 12L13 or stainless steel  303 & 316 with a galvanized surface treatment and different surface finishes (yellow/white zinc plated). Available with parallel threads in different head diameters (10, 16 & 22 mm head dia. )and sizes:

Metric: from M6x1 to M16x1.5

British Standard Pipe (BSP): 1/8", 1/4" & 3/8"

U.S. National Pipe Thread (NPT/PTF): 1/4" 

Our AVIATIONEU NEW ERA flush head grease fittings comply with  DIN 3405 standard.They are made from different materials,  EN 1AL(free cutting steel), 1SMnPb30+C or SAE 12L13 and  zinc plated. Available with parallel threads in different sizes:

Metric: from M5x0.8 to M12x1.5

British Standard Pipe (BSP): 1/8", 1/4" & 3/8"

U.S. ANSI/ASME B1.1 Unified National Thread - UNC Coarse series and UNF Fine series: 1/4"-28

For additional information please contact us.

AEROSHELL® brand relates to one of the most comprehensive and proven ranges of aviation lubricants in the aviation lubricants market worldwide. AEROSHELL® lubricants include aircraft piston and turbine engine oils, airframe and wheel-bearing greases, hydraulic fluids,  preservatives and other fluids. AEROSHELL® aviation lubricants are available in in different packaging options such as 55 gallon drums, 5 gallon pails, 1 US quart cans and cartons with 24 1 US cans each. A brief description of AEROSHELL® aviation lubricants is included in the Product Description section. Some of AEROSHELL® lubricants are already offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the supplied brief product catalogs and product descriptions,  the individual product presentations and corresponding documentation or contact us.

Manufactured by LIGHTHOUSE FOR THE BLIND INDUSTRIES, SKILCRAFT® PRO LUBE II is a general-purpose lubricating oil preservative formulated to lubricate small arms and automatic weapons, protect them from corrosion, and displace water at low temperatures. This product is approved to Federal Specification MIL-PRF-32033 and meets Quality Parts List (QPL) No. LP-7053A. It is ideal for use within fuel systems and combustion chambers of engines, in addition to other general-purpose lubrication needs.

Available Packaging Options: 12.5 oz. Aerosol Cans, Case 12X12.5 oz. Aerosol Cans, Case 16X1 US Quart Cans

HAZMAT Information: HAZMAT UN Number:1950, Hazard Class 2.2 (Aerosol Can) – Not Regulated (USQ Can)

For additional information please consult the supplied documentation.

SHELL® extensive range of automotive lubricants includes engine oils for a variety of applications in cars, motorcycles as well as trucks and light or heavy duty vechicles.

SHELL® HELIX Fully Synthetic Motor Oils are manufactured from 100% synthetic base stock and high quality additives to achieve higher performance levels than both synthetic technology and mineral oils. To these high-quality synthetic base oils SHELL® proprietary Active Cleansing Technology is added to create a motor oil that helps provide superior cleansing and protection for today’s engines. SHELL® HELIX oil types include Semi Synthetic Motor Oils, Mineral Motor Oils, High Mileage Oils, Diesel Motor Oils and  ECT Oils.

SHELL® ADVANCE portfolio of motorcycle engine oils consists of  4T, 2T motorcycle and scooter oils. Their key benefits include zero loss in horsepower, fuel economy and longer drain intervals.

SHELL® RIMULA Light Duty range of oils is designed for light duty trucks. With Dynamic Protection and Dynamic Protection Plus Technology (included in Grade LD5), they protect against engine wear and tear caused by each stop and start in daily operations. The high performance additive package contains anti-oxidation components for a longer oil life in vehicles operating under high idle engine conditions. Dispersants in the additive package help break down soot and deposit build-up regardless of the type of load carried.

SHELL® RIMULA Heavy Duty engine oils offer outstanding wear protection with reduced viscosity for improved fuel economy, acid and deposit protection and wear control.

Further information can be obtained through the supplied documentation.

AEROSHELL® Turbine Oil 308 is a 3 mm2/s synthetic ester oil incorporating additives to improve resistance to oxidation and corrosion and to minimise wear. It was developed specifically for use in particular models of aircraft turbo-prop and turbo-jet engines for which a MIL-PRF- 7808 (formerly MIL-L-7808) oil is required. AEROSHELL® 308 turbine oil contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.

Product Specifications/Approvals:

US – Approved MIL-PRF-7808L Grade 3

Nato Code O-148

Joint Service Designation – Equivalent OX-9

Airbus Helicopters CM  CM0113

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.

Atlas Copco Roto Inject Fluid (RIF) NDURANCE is a mineral based oil specially formulated to protect GA-GX rotary screw compressors. RIF NDURANCE unique additive package enables its operation in harmony with all other components in the compressor.

RIF NDURANCE allows the compressor to operate in dusty and humid conditions and keeping the system deposit free. Protects the compressor against oxidation leading to a longer drain interval, up to 4 000h or 1 year when operatng in mild conditons.

Its tailor made viscosity (55mm²/s) together with specially designed an -wear additives provide the compressor with the right lubrication for rotors, bearings and gears for a wide spread of operating conditions, preventing metal-metal contact of critical parts.

Ensures that lubricant will keep its original properties after separation from water. It will also keep water out of the oil circuit, avoiding corrosion on the metal parts.

RIF NDURANCE  is offered in different containers with 5, 20, 209  and 1000 liters' capacity.

For additional information please refer to the supplied documentation.

Turbine engine oils (TEO) used in commercial aircraft and general aviation engines are conforming with the US military specification MIL-PRF-23699 (formerly MIL-L-23699), an essential step in the process of gaining engine equipment manufacturer approval in different engine, engine accessories and auxiliary power unit types. Although primarily a military specification, MIL-PRF-23699 has served the commercial aviation sector since the 1960s and still used today. This specification covers four oil  categories:

STD – Standard

HTS – High Thermal Stability

C/I – Corrosion Inhibited (for military use only). Oils in this category include AeroShell Turbine Oil 531, Eastman Aero-D, NYCO TURBONYCOIL 601 and Castrol AeroJet 5.

EE – Enhanced Ester

In the case of TEOs, hotter running engines with extended times between overhauls are not adequately covered by MIL-PRF-23699 for the type of oil needed in modern commercial engines requiring additionaly tighter controls

In 2005, SAE (Society of Automotive Engineers) has issued SAE AS5780 to replace MIL-PRF-23699 defining two grades of oil:

SPC – Standard Performance Capability, almost identical to STD except for additional reporting items.

HPC – High Performance Capability. SAE HPC grade has more stringent performance requirements compared with the MIL-PRF-23699 HTS grade.

Most commonly used aircraft turbine engine oil brands fall under both MIL-PRF-23699 and SAE AS5780 specifications in the respective categories. 

Examples: 

- STD/SPC: Castrol 500 (*),AeroShell 500, AeroShell 560,Mobil Jet II, etc.

- HTS/HPC: Mobil Jet Oil 254, Eastman 2197, etc. 

Furthermore, certain oils comply with different specifications to those of MIL-PRF-23699 or  SAE AS5780.

For additional information on differences between MIL-PRF-23699 and SAE AS5780 specifications please consult the supplied documentation.

Most of these oils are listed in our Web Platform for Supplies and can be supplied to customers in different packing options, due to our extensive co-operations with their respective producers or distributors.  If your oil is not listed please contact us for assistance or a quotation.

Note: HTS/HPC oils offer improved temperature capabilities (engine cleanliness) but at the cost of lower elastomer compatibility & higher prices. Most engines run well on STD/SPC oils.

 (*) Castrol™ 5000 Aircraft Synthetic Turbine Oil is replaced by other 5 centistoke gas turbine oils in the MIL-PRF-23699 STD category. Please consult supplied TDS.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

BURNDY® LLC is an electrical connector solution provider manufacturing connectors, fittings and installation tools for electrical utilities, commercial, industrial, and maintenance companies. The company has been acquired by HUBBELL Incorporated a designer manufacturer and supplier of electrical and electronic products for non-residential and residential construction, industrial, and utility applications.

BURNDY® PENETROX™ is a family of oxide-preventing compounds (complexes) used for inhibiting oxidation or corrosion, producing poor initial contact resistance and for correcting electrical junction between metal parts such as conductors. All BURNDY® PENETROX™ complexes consist of homogeneously suspended metal particles that improve electrical conductivity and increase the integrity of the contact providing improved connections whether for copper or aluminum compression and bolted connectors. BURNDY® PENETROX™ product range includes:

PENETROX™ A, petroleum-based complex with equally suspended zinc particles. UL Listed to 600 volts and used for contacts such as aluminum to aluminum, aluminum to copper and aluminum conduit threads. It is not advised to use with rubber or thermoplastic insulated conductors.

PENETROX™ A-13, synthetic-based complexes with suspended zinc particles. Suitable for aluminum to aluminum, aluminum to copper contacts and aluminum conduit threads. It can be used with rubber or thermoplastic. Penetrox A-13 is UL Listed for all voltages.

PENETROX™ E, synthetic-based complex consisting of equally suspended copper particles. Used for copper to copper contacts, copper threads and all grounding applications. UL Listed. 

PENETROX™ HT, synthetic silicone based complexes with equally suspended zinc and nickel-aluminum combination particles. Used for aluminum to aluminum contacts. Penetrox HT is advised for use with high temperature ACSS and ACCC connectors. They are not UL Listed.

For more information please refer to the supplied documentation.

AEROSHELL® produces a range of mineral and synthetic hydrocarbon hydraulic fluids, lubricating fluids and preservatives supporting airraft systems' operation and longer preservation.  A non-exhaustive list of offered products is presented below. Additional information is available in the Product Description section. Due to the continuous expansion of our offered product portfolio some AEROSHELL® products may not be listed yet in our Web Platform but they may still be offered through our supply network. Please contact us for additional information or assistance.

AEROSHELL® Fluid 3, general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. 

AEROSHELL® Fluid 12, synthetic ester oil used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. Particularly suitable when an oil with a low evaporation rate is required at high and low temperatures. Approved to MIL-L-6085C.

AEROSHELL® Fluid 31, synthetic hydrocarbon based aircraft hydraulic fluid with greatly improved fire resistance characteristics when compared with conventional petroleum products. Approved to MIL-PRF-83282D.

AEROSHELL® Fluid 41, mineral oil based  "super clean" hydraulic oil manufactured to a very high level of cleanliness and possesses improved fluid properties. It is suitable for use with brake and hydraulic systems with synthetic rubber seals.

AEROSHELL® Mineral Fluid 5M-A, highly refined, medium viscosity mineral oil with an extreme pressure additive and additives for good oxidation and corrosion protection. No longer produced. Limited availability till stock exhaustion. A possible alternative could be NYCO Nycolube 3525 meeting the same specification MIL-PRF-6086F.

AEROSHELL® Fluid 61, synthetic hydrocarbon base hydraulic fluid specifically inhibited to provide excellent oxidation stability for the oil. Approved to MIL-PRF-46170 Type I.

AEROSHELL® Fluid 602, synthetic hydrocarbon coolant fluid for aircraft electronics. No longer produced. Limited availability till stock exhaustion. Consider CASTROL® BRAYCO™ 889 meeting same specification MIL-PRF-87252E .

AEROSHELL® Fluid 71, preservative mineral hydraulic fluid of improved cleanliness. It is composed of a mineral base oil with an additive package which results in a product with excellent corrosion preventative properties as well as excellent oxidation stability, and good anti-wear characteristics.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.

SWAGELOK® Goop™ thread lubricants reduce installation time by easing the assembly of leak-tight thread connections for a variety of metals and alloys. Oil-based BLUE Goop® thread lubricants can be used on stainless steel, steel, titanium, aluminum, and nickel based alloys for temperatures up to 400° F (204° C). Halcocarbon based PURE Goop® can be used on titanium, stainless steel, steel, and nickel based alloys for temperatures up to 350° F (176° C) while Oil-based SILVER Goop® thread lubricants can be used on stainless steel, and high temperature alloys for temperatures up to 1500° F (815° C). Offered in different packaging options: 1 oz. (29.5 cm3) tubes (PURE/SILVER Goop®), 2 oz. (59 cm3) tubes (BLUE Goop®) and 1 lb. (450 g) cans (BLUE/PURE/SILVER Goop®). According to the selected product, they resist or prevent galling. 

SWAGELOK® Snoop® liquid leak detectors detect gas leaks in hard-to reach areas. They are non-corrosive and non-flammable. Contain corrosion inhibitor for added protection. SWAGELOK® Snoop® liquid leak detectors can be used over a temperature range of 27° to 200° F (-2° to 93° C). For lower temperatures, –65°F (–54°C) SWAGELOK® Real Cool Snoop® liquid leak detectors can be used. Offered in different containers: 2 fl oz./59 ml (Snoop®), 8 fl oz./236 ml (Snoop®/Real Cool Snoop®) and 1 gal/3.8 l (Snoop®/Real Cool Snoop®).

SWAGELOK® also offers SWAK™, PTFE Tape, and PTFE-Free pipe thread sealants. For more information on SWAGELOK® products please refer to the supplied documentation. 

ROCOL® is part of ITW, one of the world’s leading diversified manufacturers of specialised industrial equipment, consumables and related service businesses.

ROCOL® develops, manufactures and markets technically advanced specialist industrial lubricants and maintenance products. ROCOL® product porfolio also includes NSF and ISO 21469 certified food grade lubricants, metalworking solutions, wire rope and open gear lubricants for all marine and offshore and heavy industry applications, high performance lubricants and corrosion inhibitors for the commercial and defense aviation industry as well as line marking paints and anti-slip solutions for safer environments.

For additional information please consult the Product Description section and thhe supplied documentation of individual products.

UMETA Grease Nipples are offered in different types including hyraulic, ball, flush, bayonet, and button-head. Standard versions made of bright and passivated zinc-plated steel, stainless steel (V2A + V4A), or brass according to international product standards (e. g. DIN, ISO, SAE, BS, JIS). They are case-hardened according to DIN, zinc-plated and passivated. They are essential for maintenance and repairs and can be used for protection of the lubrication point against dirt and humidity and standardized connection to the grease gun. Different applications of UMETA grease nipples include bearings, hinges for machines, vehicles, industry, cardan and drive shafts, linear guides, hydraulic cylinders, drives, chains, axes and others. 

UMETA hydraulic grease nipples have a conical thread, the head diameter is 6.5 - 0.2 mm. Upon request, UMETA can manufacture grease nipples with different measurements, threads, thread types (for example, cylindrical thread), with other opening pressures.

Hydraulic connectors 515/G - 516/G are recommended as nozzles with  the use of plastic caps for protection and conservation.

Mostly sold in packs of 100 pieces per pack or other number as specified after the letters "PK" in the product reference number (SKU).

For further information please refer to the attached documentation.

Slick magnetos by CHAMPION AEROSPACE are used on nearly all aircraft piston engines. They are OEM approved for more than 225,000 aviation engines and exhibit distinct design and operational features such as smaller and lighter design, radio noise suppression, lift-off housing and easy maintenance. 

The following CHAMPION AEROSPACE approved lubricants are offered for use in the mainenance and overhaul of these magnetos to ensure their long service life.

R5008 Magneto Bushing Oil

EXXONMOBIL® Mobil TERESSTIC 100 Series oil. TERESSTIC is the brand name for a line of long-service-life lubricating oils. They are formulated with carefully selected base stocks and highly effective additives, including oxidation and rust inhibitors and anti-foam agents.

The TERESSTIC line of circulating oils consists of nine viscosity grades. Eight of these grades are blended to viscosity values that conform to the International Organization for Standardization (ISO) viscosity classification system.

Uses: Distributor block and gear assembly Oilite bearings. 

M1827 Rotor Cam Grease

Proprietary liquid lubricant developed through Boeing manufacturing operations and lubricant experience.

Always consult CHAMPION AEROSPACE manuals for the proper use of these lubricants.

For additional information please refer to the supplied documentation.

Most airplanes nowadays are painted in vibrant colors, with designs and logos that need to retain their "fresh" appearance till repaint despite their operation in  harsh weather and environmental conditions. The types of paint used on arcraft are enamel and epoxy. For more information about these 2 types of paints please refer to the Product Description section.

PRODUCTS TEQHNIQUES INC. (PTI) is a manufacturer of chemicals, coatings and cleaners. PTI coatings product portfolio includes  over 131 coatings meeting military and federal specifications (MIL, MIS, ORD, TT, and FAA) and a number of proprietary formulations. PTI coating systems can be applied by spray, brush, dip, and aerosol. 

PTI trademarks & manufacturing license for worldwide sales of specialty coatings & solvents have passed to SOCOMORE S.A., a worldwide solutions provider in critical surface preparation, processing and protection in commercial aviation, defense, energy and industrial markets.The PTI product lines will remain unchanged, continue to be manufactured by PTI but they will be sold by SOCOMORE under SOCOGLAZE brand name.

SOCOMORE SOCOGLAZE TTE Series of enamel topcoats are high performance, single component enamel topcoats designed for interior use on high performance general aviation, business jet, and commercial aircraft and vehicles. These coatings are also excellent exterior coatings on substrates that are not subjected to harsh environments. TTE Series includes PT-381 (Gloss),  PT-382 (Semi Gloss) and PT-383 (Flat) enamel topcoats meeting and exceeding Military Specifications TT-E-489J, TT-E-529G & A-A-2962 and TT-E-527D respectively. Offered in bulk or aerosol they  can be applied over wood, composite or metal surfaces.  They can also be used on equipment, machinery, and metal parts as a high quality industrial enamel topcoat.

TTE topcoats are offered in 725 colors of US Federal Standard 595 (aka as SAE Aerospace Material Specification AMS-STD-595) used to identify and specify colors for military & civilian products. 595 colors are correlated to RAL, the European color coding system.

HAZARDOUS MATERIALS - UN1263, CL 3, III - Hazmat packaging & certification required. In addition, products in aerosol cans are generally prohibited to ship by air without Hazmat packaging & certification due to the possibility of combusting at high altitudes. 

For additional information, please refer to the supplied documentation or contact us.

LVP POWDER & PAINTS (LVP), a subsidiary company of the Crosslink Powder Coating Corporation, is manufacturer of touch up paints & reseller of powder coating powders. The latter are produced from popular brands like PPG, Tiger Drylac, IFS, Sherwin Williams and Cardinal Paints. LVP Touch Up Paints use an acrylic enamel which offers powerful surface protection from a single component. This quick dry enamel is especially useful for products made out of metal and plastic like industrial equipment, furniture, household products, and machinery. Unlike most cheap generic paint products, LVP paints offer a outstanding film hardness and exterior durability allowing quick coating, packing and shipping without compromising the integrity of the equipment. LVP touch up paints’ features & benefits include:

Fast drying: To Touch: (15-30/min) To Handle:(1-2/hours) 

Excellent flow and leveling

Excellent adhesion

Can be applied direct-to-metal

Compatible over a variety of primers

Available in a wide-range of custom colors

Can be aerosol applied

Designed for exterior performance

Available in different color standards RAL | FED-STD-595 | AMS-STD-595

Markets: Powder Coating Products | Fabricated Metal | Industrial Equipment | Telecommunications | Material Handling | Heavy Duty Equipment | Agriculture Equipment | Household Furniture

For additional information on LVP powder coating and painting products please consult the supplied documentation.

EASTMAN SKYDROL™ Aviation Hydraulic Fluids were developed to meet the requirements established by manufacturers and backed by recognized experts in phosphate ester technology. SKYDROL™ was the first fire-resistant hydraulic fluid in the industry and today remains the most advanced aviation hydraulic fluid. SKYDROL™ aviation hydraulic fluids include:

SKYDROL™ PE-5,  a Type V, fire-resistant hydraulic fluid offering the longest fluid life of any phosphate ester fluid available today, even under high moisture conditions. Key benefits include less frequent fluid replacement, reduced disposal volume and lower environmental footprint. Meets BMS3-11P Type V, Grade A & C specification.

SKYDROL™ 5, a lighter-weight hydraulic fluid due to its lower density resulting in fuel savings.  SKYDROL™ 5 is the first aviation hydraulic fluid demonstrating erosion-resistance at higher temperatures leading to decreased maintenance and downtime. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ LD-4, the world’s best-selling Type IV aviation hydraulic fluid, featuring low density, valve erosion prevention, and deposit control. Erosion resistance is made possible by a breakthrough anti-erosion additive and acid scavenger included in the formulation. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ 500B-4, the only commercially available standard-density aviation hydraulic fluid offering additionally improved erosion resistance, as it contains the same anti-erosion additive and acid scavenger as LD-4. Meets BMS3-11P Type IV, Class 2 specification.

For additional information please refer to the supplied documentation or contact us.

AEROSHELL® 100 Series SAE 50 Mineral Aviation Piston Engine Oils are  straight mineral oils blended from selected high viscosity index base oil. They are offered as AEROSHELL® 100 mineral break in oil with no additives, AEROSHELL® W100 mineral ashless dispersant oil for normal use and  AEROSHELL® W100 PLUS mineral ashless dispersant oil with a friction modifier/anti-wear additive package. They are approved for all aviation civil aircraft piston engines. The specially blended high viscosity index base oil in AeroShell oil 100 series oils has been designed to provide effective protection to engine components compared to conventional mineral oils.

AEROSHELL® 100 SAE 50 is to be used when an oil without a dispersant additive is required during the break-in of  new aviation piston engines or those recently overhauled. AEROSHELL® W100 oil includes very small amounts of pour point depressant to improve fluidity at very low temperatures and an anti-oxidant. This helps ensure complete confidence and peace of mind knowing that your aircraft will perform reliably in between scheduled overhauls.

AEROSHELL® 100 Series oils are produced to meet fully the SAE specification J-1966 (Grades SAE 50 respectively).  Furthermore, they have military qualification approval and are listed on the Qualified Products List (QPL) issued by the US Navy and on the Technically Acceptable Products List (TAPL) issued by the UK Ministry of Defence. Common packing options include 1 US Quart bottles, cases of 6  or 12 1 US Quart bottles, pails of 5 US Gallons  and drums of 55 US Gallons.

Please also refer to the attached documentation.

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.