Turbine engine oils (abbreviated as TEOs), also known as jet oils, turbo oils are specialty lubricants designed to support the operation of turbine engines. Apart from their lubricating function of the engine,  gearbox, shafts and associated accessories, TEOs have two additional functions. Their various additives protect the components from corrosion, and filter contaminants in the engine such as carbon deposits (coking) while TEOs are also used as heat transfer fluids, cooling the engine in temperatures reaching 1000°C, in turn extending the life of the oil up to 25,000 hours of operation. TEOs have been initially developed as mineral and and subsequently innovated to synthetic.

Castrol™ 5000 is a 5 centistoke "Type II" synthetic lubricant designed for use in modern gas turbine engines operating at bulk oil temperatures exceeding those which "Type I" oils can successfully withstand. It  is a clear, amber-colored fluid having the appearance of a thin oil with a faint aromatic odor. It is based on a blend of high quality hindered esters and additives used to offer a product with excellent high temperature and oxidation stability, good load-carrying properties and complete compatibility with engine and accessory constructional materials, such as metals and elastomeric sealing compounds. 

Castrol™ 5000  is compatible with other MIL-PRF-23699F Std, 5 centistoke gas turbine lubricanrts such as AEROSHELL® 500, 560, EXXONMOBIL® Mobil Jet Oil II, EXXONMOBIL® Mobil Jet Oil 254, EASTMAN Turbo Oil 2380™ and others. However, it is unwise to mix grades of different viscosity.

Castrol™ 5000  oil  is not compatible with mineral oils and while it is miscible with phosphate ester hydraulic fluids, the latter will have a detrimental effect such as coking propensity and resistance to corrosion. 

For additional information and specifications please refer to the supplied documentation.

AIRGO 3001 is a trademark of ZF Friedrichshafen AG. It is a high-performance gearbox oil designed for use in automatic transmissions with an outstanding oxidation and friction stability.

The new and improved QUARTZ range  by TOTALENERGIES (formerly TOTAL) offers a comprehensive choice of engine oils for every vehicle including formulated oils for use in diesel engines and older vehicles. Three cutting-edge technological improvements enable better car engine care, protection and cleanliness while, at the same time, reducing maintenance costs and improving fuel economy.

ECO SCIENCE technology helps the engine to resist physical and chemical degradation for an extended engine life, while maximizing performance and scoring high in fuel economy.

AGE RESISTANCE technology (ART) prevents engine's  wear and tear, abrasion and oil oxidation even at extreme temperatures through a unique combination of hyperactive molecules and anti-wear additives.

CLEAN SHIELD technology integrated in QUARTZ engine oils captures all dirt, dust and soot in the engine, preventing sludge formation and ensuring cleanliness and reduced maintenance costs in the long run.

QUARTZ range of engine oils now features exciting new packaging. QUARTZ product range includes:

Quartz 9000, a synthetic oil providing superior levels of engine performance and protection. It also provides TOTALENERGIES' highest levels of engine cleanliness. Quartz 9000 is long-lasting, extending intervals between oil changes.

Quartz 7000, a synthetic-based oil that provides enhanced driving comfort and high levels of engine cleanliness and protection.

Quartz 5000, an improved mineral oil that can be used in older as well as more recent vehicles.

Quartz 3000, a mineral oil suitable for older cars that can't use other oils from the range.

Quartz INEO, a synthetic oil with pollution control, specially formulated for use with diesel engines. Quartz INEO provides exceptional engine cleanliness and supports particulate filter performance.

Quartz with ART  (age resistance technology) which improves the engine's ability to withstand mechanical ageing. 

Key benefits from the use of TOTALENERGIES QUARTZ engine oils include:

Protection against all the causes of wear by reducing friction and corrosion

Prevention of engine overheating

Ensuring good cylinder compression and maximum engine efficiency 

Ensuring engine cleanness by preventing the deposit of various impurities

Additional information are available in the Product Description section.

Note: Supplied information is provided for reference only. For the selection of the suitable motor oil please observe the manufacturer's instructions.

For more than 50 years, PPG AEROSPACE® – PRC-DeSoto® has been a leader in the development of products fundamental to aerospace manufacturing, maintenance, and repair. The company manufactures and provides a unique group of products including aircraft windshields and windows to the commercial, regional, military and general aviation segments as well as aircraft primers, coatings and sealants for aircraft structures used in aviation and milirary applications. In addition, high performance Industrial Adhesives and Sealants  are also offered to provide protection from fuel and petroleum exposure as well as sealants for Telecom and Utility applications.

PPG AEROSPACE® – PRC-DeSoto® products are offered in different classes, specifications, application times and convenient container options including SEMCO Semkit® packages containing both the base and accelerator in one pack.

3 classes are generally used for the classification of sealants (A, B and C) although an S class does apply in some cases where a sealant can be sprayed.

Class A – Brush application, generally used on fasteners

Class B – Thicker consistency, used for fillet and injection seals

Class C – Thinner than Class B, used for fay sealing

Application times are expressed in hours (2 indicating 2 hours 1/2 indicating half an hour).

Aircraft Fuselage and Access Door Sealants are included in this presentation while respective Aircraft Firewall Sealants, Fuel Tank  Sealants, Corrosion Inhibitive Sealants and Coatings are separately presented.

For additional information on offered products please consult the Product Description Section and the supplied documentation.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

AEROSHELL® Sport Plus 4  from Shell Aviation is a second generation multi-grade piston engine oil specifically designed for use in light sport and very light/ultralight aircraft 4-stroke engines in any climate. It is the first aviation oil in the market that is BRP-Rotax tested and meets Rotax RON 424 OEM specification. AEROSHELL® Sport Plus 4  is suitable for BRP-ROTAX 912, 914, 912 iS engine series. Provides enhanced anti-wear protection compared to the previous generation as well as enhanced protection and lubricity for the smooth movement of clutch and gearbox components. Can be used with both unleaded aviation and road fuels and Avgas 100LL. Integrated additives support anti–corrosion and anti-wear of critical parts, powerful anti-oxidation action, anti-foaming for engines operating with an integrated gearbox and neutralization of acid build up. 

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the general presentation of AEROSHELL® lubricants, the supplied documentation or contact us for additional information or assistance on non listed products.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

PPG AEROSPACE® Corrosion Inhibitive Aircraft Sealants & Jointing Compounds include different products offered in different packings.

PPG AEROSPACE® P/S (Pro Seal) 870 Corrosion Inhibitive Sealants are two-part, manganese dioxide cured polysulfide compounds.  They have a service temperature range from -65°F (-54°C) to 250­°F (121°C), with intermittent excursions up to 275° (135°C). They act as an effective barrier against the common causes of corrosion on the aluminum alloys or between dissimilar metals. The cured sealant maintains elastomeric properties after limited exposure to both jet fuel and aviation gas. Offered in A, B & C classes.

P/S 870 Class A uncured material is suitable for application by brush in thickness up to 25 mils. It cures at room temperatures to form a resilient sealant having excellent adhesion to common aircraft substrates. Supplied in two-part kits and Semco® cartridges.

P/S 870 Class B uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits or Semkit® cartridges. 

P/S 870 Class C uncured material is designed for roller and faying surface sealing applications. It cures at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. Available in two-part kits and Semco® cartridges.

PPG AEROSPACE® Proseal P/S 890 Class A and B are aircraft integral fuel tank sealants. They have a service temperature range from -65°F (-54°C) to 250°F (121°C), with intermittent excursions up to 275°F (135°C). Proseal P/S 890 Class A is designed for brush and fay sealing of fuel tanks and other aircraft fuselge sealing applications. Proseal P/S 890 Class B  is designed for fillet sealing of fuel tanks and other aircraft fuselage sealing applications. The cured sealants maintain excellent elastomeric properties after prolonged exposure to both jet fuel and aviation gas.  Both are two-part, manganese dioxide cured polysulfide compounds. In the case of Proseal P/S 890 Class A, the uncured material is suitable for applicaiton by brush in thickness up to 25 mils. In the case of Proseal P/S 890 Class B, the uncured material is a low sag, thixotropic paste suitable for application by extrusion gun or spatula. Both cure at room temperature to form a resilient sealant having excellent adhesion to common aircraft substrates. PPG AEROSPACE® Proseal P/S 890 Class A and B  sealants are supplied in two-part kits and Semco® cartridges.

PPG AEROSPACE® JC5A Corrosion Inhibitive Jointing Compound is a versatile one-part, non-curing compound designed specifically for the aviation industry. Engineered to prevent corrosion and moisture ingress, JC5A is ideal for safeguarding removable fasteners and assemblies. 

Please refer to the Product Description section and the supplied documentation for additional information.

HENKEL LOCTITE® is the world’s leading brand for adhesives, sealants and surface treatments. LOCTITE® product portfolios include an extensive range of adhesives, sealants, surface treatments, and other industrial chemicals that include acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies. Available in various packaging sizes.

Several HENKEL LOCTITE® products are listed in the Product Description section. For additional information please consult the supplied documentation. For non listed items please contact us.

LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options. 

A brief description of LUKOIL® lubricants  which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.

Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.

SHELL® extensive range of automotive lubricants includes engine oils for a variety of applications in cars, motorcycles as well as trucks and light or heavy duty vechicles.

SHELL® HELIX Fully Synthetic Motor Oils are manufactured from 100% synthetic base stock and high quality additives to achieve higher performance levels than both synthetic technology and mineral oils. To these high-quality synthetic base oils SHELL® proprietary Active Cleansing Technology is added to create a motor oil that helps provide superior cleansing and protection for today’s engines. SHELL® HELIX oil types include Semi Synthetic Motor Oils, Mineral Motor Oils, High Mileage Oils, Diesel Motor Oils and  ECT Oils.

SHELL® ADVANCE portfolio of motorcycle engine oils consists of  4T, 2T motorcycle and scooter oils. Their key benefits include zero loss in horsepower, fuel economy and longer drain intervals.

SHELL® RIMULA Light Duty range of oils is designed for light duty trucks. With Dynamic Protection and Dynamic Protection Plus Technology (included in Grade LD5), they protect against engine wear and tear caused by each stop and start in daily operations. The high performance additive package contains anti-oxidation components for a longer oil life in vehicles operating under high idle engine conditions. Dispersants in the additive package help break down soot and deposit build-up regardless of the type of load carried.

SHELL® RIMULA Heavy Duty engine oils offer outstanding wear protection with reduced viscosity for improved fuel economy, acid and deposit protection and wear control.

Further information can be obtained through the supplied documentation.

AEROSHELL® Turbine Oil 308 is a 3 mm2/s synthetic ester oil incorporating additives to improve resistance to oxidation and corrosion and to minimise wear. It was developed specifically for use in particular models of aircraft turbo-prop and turbo-jet engines for which a MIL-PRF- 7808 (formerly MIL-L-7808) oil is required. AEROSHELL® 308 turbine oil contains a synthetic ester oil and should not be used in contact with incompatible seal materials and it also affects some paints and plastics.

Product Specifications/Approvals:

US – Approved MIL-PRF-7808L Grade 3

Nato Code O-148

Joint Service Designation – Equivalent OX-9

Airbus Helicopters CM  CM0113

NOTE: Other AEROSHELL® piston engine and turbine oils, greases and fluids are also offered through our Web Platform for Supplies or can be furnished through our network of co-operating suppliers. Due to our continuously expanding list of suppliers and their respective range of offered products, certain AEROSHELL® products may not be currently listed in our Platform. Please refer to the supplied list of offered products or contact us for additional information or assistance on non listed products.

Different aircraft engine firewall sealants are included in this presentation while other PPG AEROSPACE® products are separately presented.

PPG AEROSPACE® PR-812 is a high temperature primerless firewall sealant. It is a two-part, synthetic rubber compound designed for sealing firewall structures against the passage of air and vapours.

The uncured material is a low sag paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant to common aircraft substrate. It has a service temperature range from -54°C (-65°F) to 204°C (400°F), and will withstand flash temperatures of 1093°C (2000°F). HAZARDOUS MATERIAL.

PPG AEROSPACE® Pro-Seal P/S 700 Firewall Sealant is a high temperature two-part, synthetic rubber compound primerless firewall sealant. It has a service temperature range from -65°F (-54°C) to 400°F (204°C, with withstand flash temperatures of 2000°F (1093°C). The material is designed for sealing firewall structures against the passage of air and vapors.The uncured material is a low sag paste suitable for application by extrusion gun or spatula. It cures at room temperature to form a resilient sealant to common aircraft substrates. Its storage life is at least 12 months when stored at temperatures below 80 °F ( 27 °C) in original, unopened containers. Meets MIL-S-38249 TYPE 1 and AMS3374 Type 4. Alternates with CS1900 and PRS12. Black color. Supplied in a two-part can kit and two-part SEMKIT® injection kits. HAZARDOUS MATERIAL.

Please refer to the attached documentation for additional information.

XPS™ is a BRP® brand for engine oils and and care products for powersport and marine applications (from boats to bikes and everything in between).  XPS™ product range of powersport engine oils includes oils for off-road, on-road and snowmobile applications and most of them can be used in multiple applications. More information are provided in the Product Description section. For XPS™ care and marine products see their separate presentations. 

XPS™ OFF-ROAD  OILS

4T 5W-40 SYNTHETIC BLEND OIL with premium anti-wear and anticorrosion additives for off-road, on-road and PWC 4-stroke engines, including turbo or supercharged powersports engines. Provides superior engine and transmission protection against rust and corrosion, even in extreme conditions.

4T 10W-40 SYNTHETIC BLEND OIL with premium anti-wear additives for superior engine and transmission protection against heat, rust and corrosion.

4T 10W-50 SYNTHETIC OIL with premium anti-wear and anticorrosion additives for off-road, on-road and PWC 4-stroke engines, including turbo or supercharged powersports engines. Provides superior engine and transmission protection against rust and corrosion.

XPS™  ON-ROAD OILS

4T V-TWIN 20W-50 SYNTHETIC OIL designed for liquid-cooled and air-cooled V-twin 4-stroke motorcycle engines and gear transmission use. Provides superior protection against rust, corrosion and high heat of air-cooled V-twin engines.

4T MOTO 10W- 40 SYNTHETIC OIL for motorcycle engines and transmissions. Protects against heat, rust and corrosion, even in the harshest conditions. Fully compatible with catalytic converters.

4T 5W-40 SYNTHETIC BLEND OIL with premium anti-wear and anti-corrosion additives for off-road, on-road and PWC 4-stroke engines, including turbo or supercharged powersports engines. Provides superior engine and transmission protection against rust and corrosion.

XPS™ SNOWMOBILE  OILS

2T E-TEC® SYNTHETIC OIL meets the unique needs of Rotax® engines. Provides maximum protection against wear in E-TEC engines, and keeps components lubricated, clean and free of wear. It can be used in direct or semi-direct fuel injection systems and high performance carburetor 2-stroke engines. 

2T SNOWMOBILE SYNTHETIC OIL for 2-stroke snowmobiles with the latest in high performance engine technology. Specifically formulated for electronic fuel injection system, direct injection, semi-direct injection, exhaust valves and high performance carbureted 2-stroke engines. Provides low smoke and easy cold starting.

The NYCO GREASE® range of greases includes multi-purpose or special-purpose mineral and synthetic greases for extreme applications (low and high temperatures, high speed and pressure, saline, corrosive, humid environments, etc.), compliant with civil, military aviation and industrial constraints. They are intended for use in a variety of applications such as airframe, slats, flaps, heavy loads, THS (Tail Horizontal Stabilizer), actuators, bearings, doors, landing gears, wheels, jacks, rudders, LRU (Line Replaceable Units) and also as an anti-seize or assembly compound, protection grease, etc.  NYCO GREASE® NLGI 2 grade greases commonly used in Aerospace and Defense applications with respective specifications & approvals, are outlined below. 

NYCO GREASE® GN 06 mineral grease thickened with a lithium soap for use in low speed and sliding motion parts and as an airframe multipurpose grease (doors, slaps, flaps, landing gear, etc.

NYCO GREASE® GN 10 and GN 22 general purpose airframe greases

NYCO GREASE® GN 15 general purpose aircraft lithium grease

NYCO GREASE® GN 43 an aircraft synthetic grease for instruments and ejection seats

NYCO GREASE® GN 44 a synthetic aircraft grease for weapons

NYCO GREASE® GN 45 a blend of silicone and graphite, ideal for lubrication of roller bearings, transmissions in propellers, threading, etc.

NYCO GREASE® GN 148 a multi-purpose airframe and landing gear grease containing excellent anti-corrosion additives

NYCO GREASE® GN 155 a heavy duty naval, sea-water resistant grease for use in lubrication of bearings, ropes, pins and joints exposed to sea-water wash-out, dust, temperature and heavy loads – including components fully immersed in sea-water

NYCO GREASE® GN 25013 a multipurpose extreme temperature airframe grease, based on silicone oil, thickened with polytetrafluoroethylene and reinforced with anti-corrosion and antioxidant additives

NYCO GREASE® GN 3058, based on lithium complex, intended for use in wheel bearings, propeller bearings and highly loaded landing gear areas

NYCO also offers 65 Vaseline, a stiff, rather tacky petrolatum (heavy mineral paraffin wax), with a melting point in the range 45 to 60°C. It is not aggressive to any metal or alloy and can be used for anti-seize protection, assembly and dismantling of aircraft and helicopter parts and seals, temporary rust prevention in workshop and battery terminals protection. Approvals/Qualifications: AIR 3565/A, VV-P-236, CML 03FAB1, ATR CML 04-012, CFMI CP 5070, Snecma DMR 75-103, Boeing CML D00504, Airbus Helicopters CM119.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products.

EXXONMOBIL® AVIATION Mobil Jet Oil 254 is a third-generation oil formulated to deliver exceptional high-temperature thermal stability  (HTS), excellent resistance to coking and deposit control as well as exceptional oxidation and corrosion protection. It meets the demanding requirements of latest technology  aircraft-type gas turbines operating over a wide range of severe operating conditions.  When compared to a typical Type II lubricant, Mobil Jet Oil 254 reduces bulk oil oxidation by up to 50 percent and shows deposit control capability 50 F higher.  These properties have been confirmed in various laboratory tests including; the Corrosion-Oxidation Stability Test,  Alcor Deposition Test, Vapor Phase Coker, Erdco High-Temperature Bearing Test, Ryder Gear and the Mobil Thin Film Oxidation Test.The closely controlled low-temperature viscosity of Mobil Jet Oil 254, along with its low pour point (below -54 ºC), ensure good low-temperature fluidity to permit starting and lubrication at temperatures as low as -40 ºC.  In extensive laboratory testing and in-flight experience, Mobil Jet Oil 254 also exhibits excellent bulk oil stability at temperatures up to 232 ºC (450 ºF) for extended periods.  The evaporation rate at these temperatures is low enough to prevent excessive loss of volume.  The load-carrying ability of Mobil Jet Oil 254 comes from its synthetic base stock viscosity and, therefore, is not subject to loss from viscosity index additive shear.  

Product Features & Benefits:

Excellent thermal and oxidation stability reducing the formation of carbon (carbon coking) and sludge deposits. Helps operators reduce shop visits and maintenance costs. Maintains engine efficiency and extends engine life. Reduces bulk oil oxidation by 50% and increases deposit control by 50 ºF

Excellent wear and corrosion protection extending seal, gear and bearing life. Reduces engine maintenance. 

Viscosity and shear stability across wide temperature range providing effective lubrication at high operating temperatures

Chemically stable at high operating temperatures reducing evaporation losses and lowering oil consumption

Excellent resistance to foaming maintaining film strength under rigorous operating conditions

Good low temperature fluidity permiting start-up and ensuring effective lubrication of critical components at temperatures as low as -40 °F.

EXXONMOBIL® Mobil Avrex™ S Turbo 256  Gas Turbine Lubricant is a combination of a highly stable synthetic base fluid and a unique chemical additive package. Thecombination provides outstanding thermal and oxidative stability to resist deterioration and deposit formation in both the liquid and vapor phases, as well as excellent resistance to foaming. The effective operating range of this lubricant is between -54°C and 176°C (-65°F and 350°F). The pour point is below -60°C (-75°F). The product has a high specific heat in order to ensure good heat transfer from oil-cooledengine parts. In extensive laboratory testing and in-flight performance, Mobil Avrex™ S Turbo 256  exhibits excellent bulk oil stability at temperaturesup to 176°C (350°F). The evaporation rate at these temperatures is low enoughto prevent excessive loss of volume. It is uniquely suited for use when extreme low temperatures restrict the use of higher viscosity engine oils

Mobil Avrex™ S Turbo 256 Gas Turbine Lubricant (QPL listed as RM 248A) is recommended for aircraft gas turbine engines in commercial and military service, particularly where start-up temperatures are below -40°C (-40°F). The product is approved against U.S. Military Specification MIL-PRF-7808, Grade 3 while it is also compatible with other synthetic gas turbine lubricants meeting MIL-PRF-7808 or MIL-PRF-23699 specifications (*). The product is compatible with all metals used in gas turbine construction, as well as with F rubber (Viton A), H rubber (Buna N), and FVMQ rubber (fluorosilicone).

(*) Mixing of Mobil Avrex™ S Turbo 256 Gas turbine lubricant  with other products is not recommended because the blend may result in some loss of its performance characteristics.

EXXONMOBIL® MOBIL® Gear Lubricants are formulated to help protect and extend the life of transaxle, rear axle and differential gears. They provide outstanding protection, even in some of the most extreme operating conditions. They include:

MOBIL® 75W-90 and 75W-140 Multi-Purpose Automotive Gear Lubricants designed to help meet the highest level performance requirements of modern passenger vehicles in all types of operating conditions including limited slip applications, as well as, deliver outstanding power transfer performance.

MOBIL® 80W-90 and 85W-140 Commercial Gear Oils engineered for performance in heavy-duty commercial transmissions, axles and final drives where extreme pressures and shock loading are expected. Applicable for on-highway light and heavy-duty trucks, buses, vans and cars.

MOBIL® MOBILGEAR® XMP Series Extra High Performance Industrial Gear Oils designed to provide optimum equipment protection and oil life even under extreme conditions. Recommended for enclosed industrial gear drives including steel-on-steel spur, helical, and bevel gears. Based on high quality mineral base stocks and an advanced proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing but also a high level of resistance against micropitting fatigue. They also offer the potential for improved lubrication of gearbox rolling element bearings and outstanding rust and corrosion protection versus conventional gear oils, including seawater and acidic water protection. Offered in different ISO Grades they conform to different specifications and approvals.

MOBIL® Mobilgear™ SHC™ XMP  Synthetic Wind Turbine Gear Oils designed to provide optimum equipment protection of wind turbine gearboxes, including steel-on-steel spur, helical and bevel gears, operating under the extreme conditions typical of wind turbines. They contain an advanced and carefully blended proprietary additive system designed to provide excellent protection against conventional wear modes such as scuffing and a high level of resistance against micropitting fatigue. They offer outstanding rust and corrosion protection in applications where salt water and acidic water protection are required. Available in 2 ISO Grades, Mobilgear™ SHC™ XMP 320 and Mobilgear™ SHC™ XMP 460.

For additional information please consult the Product Description section and the supplied documentation.

MOBIL® also offers MOBILGEAR® SHC™ XMP  Synthetic Wind Turbine Gear Oils designed to provide optimum equipment protection of wind turbine gearboxes, including steel-on-steel spur, helical and bevel gears, operating under the extreme conditions typical of wind turbines. For more information please refer to our product presentation on EXXONMOBIL® MOBIL® Wind Turbine Lubricants.

SOUTHWESTERN PETROLEUM LUBRICANTS LLC. (SWEPCO) is a manufacturer of technologically advanced lubricants that protect equipment assets in even the most severe operating conditions while helping companies around the world reduce overall operating costs through increased uptime and productivity and lowering maintenance and lubrication expenses. SWEPCO brand lubricants and specialty compounds are used in a wide range of applications serving the needs of Construction, Mining, Manufacturing, Marine &Transportation industries. For additional information on SWEPCO products please consult the Product Description section and the supplied documentation.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, UNITED AIRCRAFT CORPORATION), Ukrainian (Antonov), and others.

Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer. In many cases they are analogues and cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other OEM lubricants also included in our offered product range as separate product listings  in this Web Platform. 

An overview of offered AVIATIONEU NEW ERA AVIATION ENGINE OILS is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and GREASES please refer to the respective separate product presentations. 

Due to our continuously expanding network of co-operating suppliers, and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative container capacities: 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.