EASTMAN SKYDROL™ Aviation Hydraulic Fluids were developed to meet the requirements established by manufacturers and backed by recognized experts in phosphate ester technology. SKYDROL™ was the first fire-resistant hydraulic fluid in the industry and today remains the most advanced aviation hydraulic fluid. SKYDROL™ aviation hydraulic fluids include:

SKYDROL™ PE-5,  a Type V, fire-resistant hydraulic fluid offering the longest fluid life of any phosphate ester fluid available today, even under high moisture conditions. Key benefits include less frequent fluid replacement, reduced disposal volume and lower environmental footprint. Meets BMS3-11P Type V, Grade A & C specification.

SKYDROL™ 5, a lighter-weight hydraulic fluid due to its lower density resulting in fuel savings.  SKYDROL™ 5 is the first aviation hydraulic fluid demonstrating erosion-resistance at higher temperatures leading to decreased maintenance and downtime. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ LD-4, the world’s best-selling Type IV aviation hydraulic fluid, featuring low density, valve erosion prevention, and deposit control. Erosion resistance is made possible by a breakthrough anti-erosion additive and acid scavenger included in the formulation. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ 500B-4, the only commercially available standard-density aviation hydraulic fluid offering additionally improved erosion resistance, as it contains the same anti-erosion additive and acid scavenger as LD-4. Meets BMS3-11P Type IV, Class 2 specification.

For additional information please refer to the supplied documentation or contact us.

ARPOL AEROSPACE manufactures high-performing lubricants, oils, greases, and solvents for the aerospace industry, both military and commercial, but also for uses in land and marine applications. Their products adhere to stringent requirements and specifications designed to keep aircraft well-maintained. Packaged in accordance with unique military requirements, they include national stock numbers (NSNs), and appear on the U.S. Qualified Products List (QPL). ARPOL AEROSPACE products conform to a number of OEM, MIL, SAE, DEF STAN, and NATO code. Available in different packaging options (1 USQT, 1 USG/5USG Cans & 55 UEG Drums). For additional information on specific ARPOL AEROSPACE products please consult the Product Description section and the supplied documentation.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

EXXONMOBIL® MOBIL™ AERO Series Aviation Hydraulic Fluids includes AERO HFA, HF, and HFS hydraulic fluids offered for aircraft systems where use of hydrocarbon hydraulic fluids is required. 

They are low viscosity, high VI (viscosity index) fluids with excellent low temperature properties, good anti-wear performance, and good chemical stability.

MOBIL™ AERO  HFA is a premium quality fluid that meets the requirements of the U.S. Military specification MIL-H-5606A (obsolete). It has a very high VI and is suitable for use at temperatures down to -54 ˚C (-65 ˚F). While this quality fluid is no longer used by the US Military, it is still used in some older, small private, and small commercial aircraft. It is also used in industrial and commercial equipment requiring good fluidity at very low temperatures, where MOBIL™ AERO  HFA provides long, trouble-free service over a wide range of

operating conditions.

MOBIL™ AERO HF is a premium quality fluid that is approved against the most current version of U.S. Military specification MIL-PRF-5606. It has physical properties very similar to MOBIL™ AERO HFA, and also meets “super-clean” requirements required by modern aircraft hydraulic systems. It is intended primarily for military aircraft. It is also used as a hydraulic fluid for small private and small commercial aircraft, and as a strut fluid in landing gear of large commercial aircraft. It is approved as a NATO Code Number H-515 fluid.

MOBIL™ AERO HFA and HF are composed of mineral oil base stocks and contain shear-stable VI improvers.

MOBIL™ AERO HFS is a synthetic polyalphaolefin lubricant that is approved against the most current version of U.S. Military specification MIL-PRF-83282. It does not contain a VI improver. It is designed for use at temperatures down to -40˚C (-40˚F). It provides better flammability and volatility, improved stability, but has a higher viscosity at low temperature than MOBIL™ AERO HF. It meets the “super-clean” requirements. It is intended primarily for US Military aircraft. It is approved as a NATO Code Number H-537 fluid.

For additional information please consult the supplied documentation.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® ARDROX® 185 Series colorless scale/rust removers have a greater than 12.5 pH level and a relative density of 1.43. The series includes 185L, a highly alkaline concentrated solution in water containing sequestrants and 185 water soluble powder offering a strong alkaline solution containing sequestrants. They can be used to remove rust and scale from iron and steel  in immersion tanks but also oil, grease and some air-dried paints.  They will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling.

ARDROX® 185L is usually used at a concentration of 30-50% by volume in water, depending on the amount of rust or scale to be removed. This corresponds to a concentration of 200 - 375 g/L of ARDROX® 185 in water. ARDROX® 185 must always be dissolved in cold water. There will be an exothermic reaction and the solution will heat up to 50-60°C / 120-140°F. The ARDROX® 185L is applied by immersion between 82 and 93°C (180 and 200°F). Agitate with mechanical agitation, do not use air agitation.

The immersion time will vary according to the degree of contamination, light rust being removed in approximately 10 minutes while heavy rust may take about an hour. If the components are heavily contaminated with oil or grease, the life of the ARDROX® 185L  bath will be prolonged if they are first degreased (e.g. with an ARDROX 6-series product).

When used in conjunction with the adequate other ARDROX® specialties (sold separately), ARDROX® 185L can be used to remove scale from hot-end jet engine components. It can also be used for cleaning parts made of titanium.

Thorough water rinsing must take place after the use of ARDROX® 185L. If no further immediate surface treatment is to follow, the use of a dewatering and protective fluid such as an ARDROX® 3-series is desirable to give protection from re-rusting.

The ARDROX® 185L  comes in a 5-gallon and 180-liter containers while the 185 powder in 25 kg bags.

Qualifications / Approvals:

SAE - ARP 1755B ( conformance )

CFMI - CFM56

Rolls Royce - CSS244 OMat

SNECMA - DMR 70-620

GE SPMC 70-80-04

Pratt Whitney - SPMC 70-12-00

Turbomeca

For additional information please refer to the attached documentation.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® has developed and manufactures NDT products for Penetrant Testing (PT) and Magnetic Particle Testing (MT) applications as well as selected equipment related to NDT processes. The PT product range is represented by the well-known Ardrox® for the aerospace industry and Britemor® and Checkmor® brands specifically developed for the automotive, automotive components, energy and general industries. CHEMETALL® PT product groups include:

• Color-contrast penetrants

• Fluorescent/water-washable penetrants (oil-based, surfactant-based, water-based)

• Fluorescent/post-emulsifiable penetrants

• Penetrant removers

• Developers

ARDROX® 920A, 9721 and 9722 are water based, water-washable fluorescent penetrants suitable for the detection of defects open to the surface. Equivalent to different AMS 2644 sensitivity levels depending on the product.

ARDROX® 970P24E, 970P25E and 970P26E are biodegradable water-washable fluorescent penetrants offering a range of sensitivity levels approved to AMS 2644.

ARDROX® 970x series water-washable fluorescent penetrants are  based on latest surfactant technology (free of Nonylphenolethoxylate, short „NPE-free“). All products have low-odor, low toxicity and therefore a minimal impact on the environment.

ARDROX® 981x series high performance, post-emulsifiable, fluorescent penetrants feature low-odor, low toxicity, high flash point, minimal environmental impact and show significant performance improvements compared to older generation products. ARDROX®  9881 is a new hydrophilic emulsifier with improved odor control and bath stability.

ARDROX® Red Dye Penetrants include 907PB, water-washable and solvent-removable, 996PB solvent-removable and 9VF2, a high sensitivity azo-dye free fluorescent color contrast water-washable penetrant without aromatic hydrocarbons.

ARDROX® developers are based on very fine white powder with a defined particle size range and advanced absorption properties. They ensure superior white film background for better visibility of indications. They can be removed easily after inspection.

ARDROX® 9PRx are colorless, highly volatile, solvent based penetrant removers. Fast drying they have a low sulphur and halogen content. Mainly used for the removal of both visible red dye and fluorescent penetrants but can also be used as a solvent pre cleaner prior to the penetrant application for the removal of oil and grease.

For additional information on ARDROX® NDT products please refer to the attached documentation.

ZET-CHEMIE® brand relates to a broad range of lubricants, cleaners and corrosion protection products for metal processing developed, manufactured and distributed by by ZET-CHEMIE GmbH for 30 years.

ZET-CHEMIE® water-miscible cooling lubricants are based on mineral oil-containing emulsion concentrates or mineral oil-free solutions. They have been used many years successfully for processing all kinds of materials. Their cutting and grinding oils are based on mineral or syntethic base oils and can be used in both chip and non-cutting metal machining processes. 

ZET-CHEMIE® corrosion protection products provide plants and components with the best corrosion protection depending on the application requirements.

ZET-CHEMIE® metal cleaners effectively address requirements for cleanliness of components in metalworking. 

ZET-CHEMIE® range of industrial lubricants can be used in a wide range of applications. 

HLP hydraulic oils feature good demulsifying properties, high stability against ageing and wear protection. They correspond to DIN 51524 Part 2. Available in the viscosity range ISO 2 – 150. HLP-D hydraulic oil conforms to DIN 51524 Part 2 with excellent detergent and dispersion features, plus wear protection. Available in the viscosity range ISO 68 – 150. 

CLP high-performance industrial gearbox oils are suitable for all industrial applications. They correspond to DIN 51517 Part 3. Their load stage is greater than 12. Available in the viscosity range ISO 5 – 680.

CGLP sliding track lubricating oils are suitable for tracks and guide rails. Their good demulsifying properties prevent them mixing with cooling lubricants. Correspond to DIN 51502 CGLP. Available in the viscosity range ISO 32 – 460.

VDL ZET-compressor oils with low evaporation losses and high stability against ageing conform to DIN 51506 VDL. Used in reciprocating and rotary lobe compressors according to the manufacturer’s instructions. Available in the viscosity range ISO 68 – 150. 

ZET-CHEMIE®  paraffin-based machine oils can be used for lubricating spindles in tooling machines. Transparent and resistant to oxidation. Available in the viscosity range ISO 2 – 32. 

ZET-CHEMIE® product portfolio also includes multi-purpose, fluid, bearing, high temperature and silicon greases in all NLGi classes and all container sizes from cartridges through to drums.Also car oils for petrol or diesel engines and trucks with EURO IV emission limits.

For additional information please refer to the supplied documentation.

Manufactured by LIGHTHOUSE FOR THE BLIND INDUSTRIES, SKILCRAFT® PRO LUBE II is a general-purpose lubricating oil preservative formulated to lubricate small arms and automatic weapons, protect them from corrosion, and displace water at low temperatures. This product is approved to Federal Specification MIL-PRF-32033 and meets Quality Parts List (QPL) No. LP-7053A. It is ideal for use within fuel systems and combustion chambers of engines, in addition to other general-purpose lubrication needs.

Available Packaging Options: 12.5 oz. Aerosol Cans, Case 12X12.5 oz. Aerosol Cans, Case 16X1 US Quart Cans

HAZMAT Information: HAZMAT UN Number:1950, Hazard Class 2.2 (Aerosol Can) – Not Regulated (USQ Can)

For additional information please consult the supplied documentation.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates. CHEMETALL® ARDROX® brand is the leading brand for aerospace surface solutions including paint and scale removers, exterior aircraft & gas turbine engine compressor cleaners, corrosion inhibiting and non-destructive testing protective compounds for both aircraft and aero engines and materials.

CHEMETALL® ARDROX® Corrosion Inhibiting Compounds' (CIC) range includes AV 8, AV 15 (aka DINITROL AV15), general purpose AV 25, the most versatile AV 30 and AV 40.  They are water displacing, long-term corrosion inhibitors highly  penetrating  areas exposed to severe corrosion conditions and combining good penetration properties with excellent corrosion inhibiting characteristics and a low applied film weight. Their viscosity is optimized to ensure an effective protective coating and promote penetration into otherwise inaccessible areas of the airframe. Applied as a coating to protect metals in airframe structures, on painted and unpainted surfaces, and in aerospace components to safeguard metals from corrosion. In areas exposed to severe corrosion conditions AV 8 should be overcoated with AV 100D - a heavy duty, waxy, firm film CIC.

CHEMETALL ARDROX® CIC are offered in different packaging options and comply with different specifications including Boeing BMS, MIL-PRF-16173, McDonnell Douglas DMS, Airbus AIMS and others. They are classified as HAZMAT Hazardous Materials UN Number: UN1139 - UN Class: 3.

CHEMETALL ARDROX® 3140 Corrosion Preventative contains film forming agents, antioxidants and corrosion inhibitors in a refined hydrocarbon solvent base. Provides long term protection for raw materials, sub-assemblies and finished components, which are to be stored or used in corrosive environments. 

CHEMETALL ARDROX® 6367 Turbine Engine Cleaner is a liquid concentrate which consists of an aqueous blend of biodegradable surfactants and corrosion inhibitors formulated to clean the compressor sections of gas turbine engines. It is solvent free and removes deposits, oils and their oxidation products in the compressor area. Contains corrosion inhibitors providing protection against corrosion for up to 3 days during engine standstill times. Does not contain any EDTA, NTA or their salts. Regular cleaning with Ardrox® 6367 helps maintain peak engine efficiency and reduces maintenance and fuel cost. Ardrox® 6367 is compatible with recognized antifreeze materials used during cold weather cleaning. Approved for use in a range of turbine engines including CFM56 CP5060 , GE SPM 70-80-04, Ref. C04-140, P&W SPM 70-12-00, SPMC 87-10A, Rolls Royce CSS 260 and others. Offered in different packaging options including 25-liter pails and 55 USG drums.

For additional information please consult the Product Description section or the attached documentation.

ZOK are powerful water-based gas turbine compressor cleaners and corrosion inhibitors produced by SOLIDUS INDUSTRIES. ZOK products are also offered with pH neutral and an effective corrosion inhibitor (ZOK 27) and with a higher pH without the added corrosion inhibitor (ZOK MX) for more challenging cleaning requirements. Originally developed for the UK Ministry of Defence over 40 years ago, ZOK 27 is used all over the world today within the Aviation, Marine, Power Generation, Oil and Gas and Industrial sectors. Regular on-line and off-line washing with ZOK 27 produces outstanding results in gas turbine engine performance: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – ultimately maximising the ROI on gas turbines.

ZOK 27 products are offered in two standards (ZOK 27 and ZOK 27 GOLD. The latter includes neutral, biodegradable, water-based gas turbine compressor and gas path cleaners specially formulated with plant based surfactants to meet ecological sustainability.

SOLIDUS INDUSTRIES ZOK 27 Gold Standard have been designed to meet the requirements of the OSPAR Convention for reduced environmental impact in sensitive marine environments, such as the North Sea. This scheme is administered by Cefas in the UK. They consist the perfect solution for maintaining peak performance of gas turbine compressors operating in ecologically sensitive environments. Regular on-line and off-line washing with ZOK 27 Gold Standard produces outstanding results: reducing fuel consumption, exhaust gas temperatures and emissions, while simultaneously increasing power recovery and the overall lifespan of engine components – all this while minimising  environmental footprint.

ZOK 27 and ZOK 27 Gold Standard  are available as CONENTRATED (CNCTR) and READY TO USE (RTU) product versions in different packing options, 12.5 liters (3.3 USG) cans, 25 liters (6.6 USG) cans, 210 liters (55 USG) drums and 1000 liters (264 USG) IBC containers.

ZOK 27 READY TO USE (RTU) versions are intended for users who do not have access to demineralised water. CONENTRATED (CNCTR) vesrions can be diluted 1 to 4 with water before use (20% solution). Demineralised water (<11μS/cm conductivity) should be used for hot/on-line cleaning. Good quality drinking water (<500μS/cm conductivity) may be used for cold/off-line cleaning.

Please also refer to the attached documentation for additional information on these products.

SHELL® extensive range of industrial lubricants, including their GTL (gas-to-liquids) technology oils, highlight the difference between industry standards and industry-leading performance. 

SHELL® range of industrial lubricants include lubricating oils for a variety of applications, hydraulic oils, coolants and greases.

SHELL® lubricating oils can be used on turbines (TURBO turbine oils separately presented), rotary and reciprocating compressors (CORENA), stationary gas engines (MYSELLA), power-generation (ARGINA & GADINIA), transformers (DIALA), axle, gear and transmission systems (SPIRAX ), slideways (TONNA), as bearing & circulating oils (MORLINA), process oils (RISELLA X) as well as for worm drive gears (OMALA). TELLUS hydraulic oils, Coolants and GADUS greases are also offered as part of SHELL® range of industrial lubricants. They are briefly presented in the Product Description section while further information can be obtained through the supplied documentation.

CONNTECT® produces and supplies combustion turbine fuel additives, compressor cleaners & wash systems and related products. CONNTECT® gas turbine compressor cleaners include CONNTECT® 5000, 6000, 7000 and CONNTECT® AF-100 anti-icing fluid for use with all CONNTECT® compressor cleaners. They are suitable for both ON LINE and OFF LINE use while ceaners can be injected directly into the compressor while the turbine is operating ON LINE extending periodic OFF LINE cleaning intervals and reducing average power loss. Available in 5-gallon pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).

CONNTECT® 5000 - concentrated water based gas turbine compressor cleaner specifically designed to remove deposits commonly found on gas turbine compressor blades.

CONNTECT® 6000 - concentrated non-toxic high performance low foam water based gas turbine compressor cleaner with cleaning efficiency similar to solvent-based cleaners.

CONNTECT® 7000 - concentrated solvent-based gas turbine compressor cleaner. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on gas turbine compressor blades including carbonaceous deposits, oil, grease and soot. It should not be used undiluted.

The ash free ingredients in CONNTECT® cleaners have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine, while they contain special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers. They can be generally mixed at 1 part cleaner to 4 parts water but the method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning.

CONNTECT® AF-100 is a superior quality, specially designed propylene glycol based gas turbine anti-icing fluid for use with all CONNTECT® compressor cleaners. It is non-hazardous, non-toxic and biodegradable. High purity, ash free product insuring no incremental contamination of the hot section of the turbine.  Depending upon the percentage of AF-100 used, the freezing temperature of the cleaning or rinsing solution can be reduced down to -22 deg. F (-30 deg. C). However, its viscosity increases significantly at cold temperatures should not be mixed with cleaner or water when the  product is very cold.

UTC AEROSPACE GOODRICH® Care & Maintenance product portfolio includes a range of different products. 

GOODRICH® ShineMaster™ Prep is a deep-cleaning surface treatment that prepares de-icers for the ShineMaster™ luster. It cleans the de-icer and removes residual coatings as the first step in the de-icer care process. Removes dirt, grease, oil, silicone products and other contamination as well as residual ShineMaster™ cosmetic polish before reapplication. The only cosmetic treatment system approved for use on Goodrich de-icers. As a secod step GOODRICH® AgeMaster #1 rubber preservative can be used  that replenishes the emollients destroyed by ozone and protects against weather. For use on neoprene de-icers only. GOODRICH® ShineMaster™ cosmetic coating can then be applied as the third step in your de-icer care process. ShineMaster™ offers de-icers a lustrous shine and cosmetically enhances de-icers by coating the exterior surface. This cosmetic treatment is easy to apply, dries quickly and provides a long-lasting shine.

For additional information please consult the supplied documentation.

LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options. 

A brief description of LUKOIL® lubricants  which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.

Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.

HENKEL BONDERITE® is the premier brand for surface technology and process solutions that create competitive advantages across the industrial manufacturing marketplace.  Trusted for reliability, sustainability & proven results, BONDERITE® processes deliver superior cost-in-use and operational efficiency through a broad portfolio of cleaner, surface treatment, coating & lubricant materials along with engineering services.

HENKEL BONDERITE® range of surface treatment products for the Aerospace industry includes TOUCH-N-PREP® coatings pens, wipes, ready-to use coatings for light metals, liquid cleaners and paint strippers. An overview of these products is included in the Product Description section. For additional information please consult the supplied documentation.

DONALDSON® COMPANY INC. is one of the largest filtration manufacturers in the world, providing filters and filtration components for a wide range of applications including commercial airliners, military applications and general aviation aircraft, agriculture and forestry, construction, mining,  truck, and bus manufacturers as well as other markets.

DONALDSON® AEROSPACE FILTRATION (AFS) cleaners/degreasers and oils are used in inlet barrier filters to bring the filters back to full capacity after their cleaning process. Offered in 1 US gallon and 5 US gallon sizes. Filter Cleaning Kits are also offered containing 1 US gallon of AFS Oil, 1 gallon of AFS Cleaner/Degreaser, a 16-ounce bottle and spout for re-oiling, a cleaner/degreaser sprayer, and seamer pliers (2-inch and 6-inch).

For additional information please consult the supplied documentation.

PHILLIPS 66® Company is among the largest refiners in the U.S, a major contract jet and avgas fuel supplier to private, commercial, and military aviation and a producer of industrial oils. The Phillips 66® line of aviation lubricants approved by the FAA and leading engine manufacturers includes premium single and multiviscosity piston engine oils and  highest quality hydraulic fluids compatible with other brands. They can be used in diverse climatic conditions. PHILLIPS 66® protective additive packages exceed industry specifications.

Some of PHILLIPS 66® aviation lubricants listed below are offered through our Web Platform for Supplies. Others, not currently listed, can also be furnished through our network of co-operating suppliers. For more information please refer to the Product Description section, the supplied documentation or contact us.

PHILLIPS 66® Aviation & Industrial Oils

PHILLIPS 66® X/C® Aviation Oil, Ashless Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® VICTORY® Aviation Oils

VICTORY® Aviation Oil 100AW, Ashless Dispersant, Single-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® Aviation Oil AW 20W-50, Ashless Dispersant, Multi-Grade Engine Oil with Antiwear Additive for Aircraft Piston Engines (PEO)

VICTORY® DIESEL Aviation Oil 10W-40, Fully Synthetic Aviation Engine Oil for Aircraft Compression Ignition Engines

PHILLIPS 66® TYPE A Aviation Oil, Ashless Dispersant, Single-Grade Engine Oil for Aircraft Piston Engines. Available in two grades, 100AD (SAE 50) and 120AD (SAE 60)

PHILLIPS 66® TYPE M Aviation Oil, Non-Dispersant, Multi-Grade Engine Oil for Aircraft Piston Engines

PHILLIPS 66® Reference Oil 50

PHILLIPS 66® Food Grade White Mineral Oil for use in food processing plants, consumer products, and in other applications.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient . With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

SOUTHWESTERN PETROLEUM LUBRICANTS LLC. (SWEPCO) is a manufacturer of technologically advanced lubricants that protect equipment assets in even the most severe operating conditions while helping companies around the world reduce overall operating costs through increased uptime and productivity and lowering maintenance and lubrication expenses. SWEPCO brand lubricants and specialty compounds are used in a wide range of applications serving the needs of Construction, Mining, Manufacturing, Marine &Transportation industries. For additional information on SWEPCO products please consult the Product Description section and the supplied documentation.

BURNDY® LLC is an electrical connector solution provider manufacturing connectors, fittings and installation tools for electrical utilities, commercial, industrial, and maintenance companies. The company has been acquired by HUBBELL Incorporated a designer manufacturer and supplier of electrical and electronic products for non-residential and residential construction, industrial, and utility applications.

BURNDY® PENETROX™ is a family of oxide-preventing compounds (complexes) used for inhibiting oxidation or corrosion, producing poor initial contact resistance and for correcting electrical junction between metal parts such as conductors. All BURNDY® PENETROX™ complexes consist of homogeneously suspended metal particles that improve electrical conductivity and increase the integrity of the contact providing improved connections whether for copper or aluminum compression and bolted connectors. BURNDY® PENETROX™ product range includes:

PENETROX™ A, petroleum-based complex with equally suspended zinc particles. UL Listed to 600 volts and used for contacts such as aluminum to aluminum, aluminum to copper and aluminum conduit threads. It is not advised to use with rubber or thermoplastic insulated conductors.

PENETROX™ A-13, synthetic-based complexes with suspended zinc particles. Suitable for aluminum to aluminum, aluminum to copper contacts and aluminum conduit threads. It can be used with rubber or thermoplastic. Penetrox A-13 is UL Listed for all voltages.

PENETROX™ E, synthetic-based complex consisting of equally suspended copper particles. Used for copper to copper contacts, copper threads and all grounding applications. UL Listed. 

PENETROX™ HT, synthetic silicone based complexes with equally suspended zinc and nickel-aluminum combination particles. Used for aluminum to aluminum contacts. Penetrox HT is advised for use with high temperature ACSS and ACCC connectors. They are not UL Listed.

For more information please refer to the supplied documentation.