CONNTECT® produces and supplies combustion turbine fuel additives, compressor cleaners & wash systems and related products. CONNTECT® gas turbine compressor cleaners include CONNTECT® 5000, 6000, 7000 and CONNTECT® AF-100 anti-icing fluid for use with all CONNTECT® compressor cleaners. They are suitable for both ON LINE and OFF LINE use while ceaners can be injected directly into the compressor while the turbine is operating ON LINE extending periodic OFF LINE cleaning intervals and reducing average power loss. Available in 5-gallon pails, 55-gallon (208-liter) drums and 330-gallon re-usable and disposable bulk containers (totes).

CONNTECT® 5000 - concentrated water based gas turbine compressor cleaner specifically designed to remove deposits commonly found on gas turbine compressor blades.

CONNTECT® 6000 - concentrated non-toxic high performance low foam water based gas turbine compressor cleaner with cleaning efficiency similar to solvent-based cleaners.

CONNTECT® 7000 - concentrated solvent-based gas turbine compressor cleaner. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on gas turbine compressor blades including carbonaceous deposits, oil, grease and soot. It should not be used undiluted.

The ash free ingredients in CONNTECT® cleaners have been carefully selected to ensure that no incremental trace elements can contribute to corrosion of the hot section of the gas turbine, while they contain special inhibitors to ensure compatibility with aluminum, nickel, nickel-cadmium, stainless steel, titanium and common coatings including painted surfaces and elastomers. They can be generally mixed at 1 part cleaner to 4 parts water but the method of injection and total amount of cleaning solution required differs for ON LINE and OFF LINE cleaning.

CONNTECT® AF-100 is a superior quality, specially designed propylene glycol based gas turbine anti-icing fluid for use with all CONNTECT® compressor cleaners. It is non-hazardous, non-toxic and biodegradable. High purity, ash free product insuring no incremental contamination of the hot section of the turbine.  Depending upon the percentage of AF-100 used, the freezing temperature of the cleaning or rinsing solution can be reduced down to -22 deg. F (-30 deg. C). However, its viscosity increases significantly at cold temperatures should not be mixed with cleaner or water when the  product is very cold.

Manufactured by LIGHTHOUSE FOR THE BLIND INDUSTRIES, SKILCRAFT® PRO LUBE II is a general-purpose lubricating oil preservative formulated to lubricate small arms and automatic weapons, protect them from corrosion, and displace water at low temperatures. This product is approved to Federal Specification MIL-PRF-32033 and meets Quality Parts List (QPL) No. LP-7053A. It is ideal for use within fuel systems and combustion chambers of engines, in addition to other general-purpose lubrication needs.

Available Packaging Options: 12.5 oz. Aerosol Cans, Case 12X12.5 oz. Aerosol Cans, Case 16X1 US Quart Cans

HAZMAT Information: HAZMAT UN Number:1950, Hazard Class 2.2 (Aerosol Can) – Not Regulated (USQ Can)

For additional information please consult the supplied documentation.

SOCOMORE® produces waterbased and gel type aerospace cleaners which can be used for cleaning of aircraft exteriors and parts.  MAGCHEM® is a sister company of SOCOMORE® producing solutions for the preparation protection of metal surfaces or composite materials in the construction and maintenance of the transport industries including solutions for aerospace cleaning, surface preparation and metalworking processes. MAGCHEM® product range includes all-purpose cleaners, liquid detergents, paint removers, degreasing solvents, deoxidizers, and others.

For additional information and specifications please refer to the supplied documentation.

HAMMONDS® Fuel Additives, Inc. is an innovative, industry leading manufacturer of fuel biocides and additives. BIOBOR® family of fuel additives includes BIOBOR® JF is the the most widely used and recommended fuel biocide and lubricity additive and the only available and approved biocide for use in aviation jet fuel while other BIOBOR® additives are extensively used in marine and other sectors.

BIOBOR® JF is the original, industry standard microbicide providing highly effective, proven dual-phase chemistry to eliminate the growth of harmful bacteria and fungi that contaminate fuel systems, clog filters, corrode metal surfaces and cause service interruptions. Non-corrosive and safer to handle than competitive biocides, BIOBOR® JF kills and prevents microbial growth in all fuel types, prevents microbial corrosion issues and filter plugging, works in both water and fuel phases for more effective kill while it adds lubricity and reduces wear scar by up to 20%. OEM approved biocide recommended for diesel and turbine engines and approved for military use (MIL-S53021A).

BIOBOR® MD Fuel Stabilizer and Detergent is a cutting edge over-the-road and marine fuel additive engineered to enhance fuel performance, increase lubricity and lower exhaust emissions. Cetane levels are raised for easier cold starting, fuel lubricity and combustion is increased, while the entire fuel system is cleaned of sludge. These advantages result in more power and torque with less fuel-related downtime and maintenance costs.

BIOBOR®  EB Alcohol free Gasoline Performance Enhancer is a specifically formulated additive for gasoline and ethanol fuel blends which helps combat the negative effects of ethanol in fuel tanks and engines while increasing engine performance, efficiency and fuel stability. It contains 2.5 times the EPA-required detergent and provides an “A” rating in NACE corrosion testing. BIOBOR®  EB supports engines' better performance and more power with increased fuel economy, while eliminating the problem of fuel phase separation. Prevents fuel phase separation and corrosion, cleans engine, injectors and valves, increases fuel efficiency, adds lubricity, protects pistons, o-rings, fuel lines and seals, stabilizes fuel for up to 18 months, provides easy start after long-term storage, 

BIOBOR® DC+Cetane Corrosion Inhibitors & Lubricity Additives are multifunctional diesel fuel conditioners offered in both summer and winter blends. They provide increased cetane, fuel stability, lubricity, detergency and water control. BIOBOR® DC+Cetane raises cetane, improves fuel economy & cold starting, reduces exhaust emissions and smoking, prevents sludge and asphaltene issues, decreases filter plugging, extends storage life of fuel, reduces injector and engine wear scar, cleans injectors, improves fuel economy, reduces power loss, disperses moisture and prevents water accumulation and corrosion.

For additional information please refer to the supplied documentation. 

An integral part of INNOSPEC Inc., INNOSPEC FUEL SPECIALTIES business unit is a leading developer and supplier of specialty additives for petroleum-based fuels, coal, and biofuels used in a diverse scope of applications.

Corrosion Inhibitor additives form part of INNOSPEC FUEL SPECIALTIES product lines. They are designed to protect against internal corrosion of fuel storage and distribution systems  and they are used extensively in storage, pipeline and aviation applications.They protect against storage vessel and pipeline leakage, contamination of fuel with particulates and blockage of filters and screens from corrosion material. 

INNOSPEC’s approved aviation fuel Corrosion Inhibitors/Lubricity Improvers (CI / LI) serve a dual function, they improve the fuel’s lubricity as well as protecting the fuel system against corrosion.Two products in the INNOSPEC’s DCI product range (DCI-4A and DCI-6A) hold numerous approvals for aviation fuel usesare approved for use in jet fuels. DCI-4A is a preferred inhibitor for aviation fuels while DCI-6A, a ‘stronger’ corrosion inhibitor than DCI-4A is preferred for all ground fuels and for pipeline corrosion protection, due to its low treat rate.

INNOSPEC's STADIS® aviation fuel Static Dissipators  aim to enhance safety by preventing static charge build up when refining or handling fuels. STADIS® 450 is a non-metallic distillate fuel additive that increases the electrical conductivity of distillate fuels and helps reduce hazards associated with mixing, transfer, and shipment of distillate fuels. It is is the premium static dissipator additive (SDA) in use today and  the only SDA approved worldwide for use in civilian and military aviation turbine jet fuels. STADIS® 425 is ntended for use in  ground fuel applications and specifically designed for use in applications such as diesel fuels and gas oil.

For more information please refer to the Product Description section and the supplied documentation. 

ASG CORPORATION ASG KUBER brand relates to an extensive product portfolio offering solutions for applications in the Defence, Aerospace, Marine Ground, Automotive, Rail and Industrial sectors, including parts, tools, lubricants, lighting, batteries and others.

ASG KUBER MIL-R-25134 B Paint Remover & Lacquer Solvent is a thickened, non phenolic aircraft paint stripper which meets the requirements of BOEING Document D6-17487 and MIL-PRF-25134 C. MIL-R-25134 B is a viscous liquid developed to remove multiple coats of paint. It clings to vertical as well as the underside of horizontal surfaces. MIL-R-25134 B can be applied as received by brushing or spraying. It is specially designed to remove lacquer and enamel coating finishes from metal surfaces of aircraft or other surfaces while it can also be used for stripping various types of paints such as varnish, zinc chromate primer, epoxy, polyurethane, etc.

Allow MIL-R-25134 B sufficient dwell time for thorough loosening or blistering of the paint. When paint is loose, thoroughly agitate all areas with a stiff bristle brush. The complete removal of the paint residues is accomplished with high pressure, high volume, cold water or with a steam cleaning machine. Normally one coat of MIL-R-25134 B is sufficient to remove more than one paint coating. Where multicoat systems have to be removed, it may be necessary to use more than one application of MIL-R-25134 B.

Product Features & Benefits

Safe to all metals.

Very effective, normally removes more than one coating of paint.

Non-flammable.

Free of phenolics.

Easily rinsed with cold water.

Can be applied by brush or non-atomizing spray methods.

Used as received (Ready-To-Use). No mixing or dilution required.

Used at room temperature.

BURNDY® LLC is an electrical connector solution provider manufacturing connectors, fittings and installation tools for electrical utilities, commercial, industrial, and maintenance companies. The company has been acquired by HUBBELL Incorporated a designer manufacturer and supplier of electrical and electronic products for non-residential and residential construction, industrial, and utility applications.

BURNDY® PENETROX™ is a family of oxide-preventing compounds (complexes) used for inhibiting oxidation or corrosion, producing poor initial contact resistance and for correcting electrical junction between metal parts such as conductors. All BURNDY® PENETROX™ complexes consist of homogeneously suspended metal particles that improve electrical conductivity and increase the integrity of the contact providing improved connections whether for copper or aluminum compression and bolted connectors. BURNDY® PENETROX™ product range includes:

PENETROX™ A, petroleum-based complex with equally suspended zinc particles. UL Listed to 600 volts and used for contacts such as aluminum to aluminum, aluminum to copper and aluminum conduit threads. It is not advised to use with rubber or thermoplastic insulated conductors.

PENETROX™ A-13, synthetic-based complexes with suspended zinc particles. Suitable for aluminum to aluminum, aluminum to copper contacts and aluminum conduit threads. It can be used with rubber or thermoplastic. Penetrox A-13 is UL Listed for all voltages.

PENETROX™ E, synthetic-based complex consisting of equally suspended copper particles. Used for copper to copper contacts, copper threads and all grounding applications. UL Listed. 

PENETROX™ HT, synthetic silicone based complexes with equally suspended zinc and nickel-aluminum combination particles. Used for aluminum to aluminum contacts. Penetrox HT is advised for use with high temperature ACSS and ACCC connectors. They are not UL Listed.

For more information please refer to the supplied documentation.

SOUTHWESTERN PETROLEUM LUBRICANTS LLC. (SWEPCO) is a manufacturer of technologically advanced lubricants that protect equipment assets in even the most severe operating conditions while helping companies around the world reduce overall operating costs through increased uptime and productivity and lowering maintenance and lubrication expenses. SWEPCO brand lubricants and specialty compounds are used in a wide range of applications serving the needs of Construction, Mining, Manufacturing, Marine &Transportation industries. For additional information on SWEPCO products please consult the Product Description section and the supplied documentation.

HUNTSMAN Advanced Materials is a leading global material solutions provider with a product portfolio of adhesives, composites and formulation products meeting demanding engineering specifications and customer-specific needs across a wide variety of industrial and consumer applications. HUNTSMAN ARALDITE® adhesives and ARADUR® curing agents form part of the company epoxy systems widely accepted and used in many industries.

For over 40 years, HUNTSMAN ARALDITE® adhesives have been the adhesive range of choice in a huge variety of industry sectors ranging from aerospace to sports goods. In recognition of the diversity of today’s industrial manufacturing and the many new materials available for product design, Huntsman offers an extensive range of ARALDITE® adhesives to meet your varied and exacting needs. The ARALDITE® brand encompasses high-performance epoxy, acrylic, and polyurethane adhesives and high-performance specialty epoxy and benzoxazine resin systems. ARALDITE® adhesive covers a broad range of applications and offers both production and performance benefits to industrial, consumer and construction markets.

HUNTSMAN ARALDITE® specialty thermoset resins are supplied in liquids or solids, and in a range of viscosities, functionalities and epoxy equivalent weights for a wide range of industrial applications, while ARALDITE® specialty epoxy resins are typically based on bisphenol-A, bisphenol-F, phenol novolacs, cresol novolacs, amino phenol, methylene dianiline, cycloaliphatics, and isocyanuric acid.

HUNTSMAN ARADUR® curing agents are supplied in liquid or solid form and can be used in conjunction with ARALDITE® epoxy resins to achieve a broad range of thermal, mechanical and electrical properties. This complete line of high-performance curing agents includes reactive polyamides, polyamido amines, aliphatic amines, cycloaliphatic amines, aromatic amines, anhydrides and novolacs.

HUNTSMAN ARADUR® markets & applications: Paints & Coatings, Wind, Aerospace, Electronics, Electrical Engineering, Composites, Construction, Adhesives.

For additional information on  ARALDITE® adhesives and ARADUR® curatives please consult the Product Description section, the supplied documentation or contact us.

CHEMETALL® is the brand for the Surface Treatment global business unit of BASF's Coatings division & a leading supplier of applied surface treatment technologies for metal, plastic & glass substrates.

CHEMETALL® ARDROX® 185 Series colorless scale/rust removers have a greater than 12.5 pH level and a relative density of 1.43. The series includes 185L, a highly alkaline concentrated solution in water containing sequestrants and 185 water soluble powder offering a strong alkaline solution containing sequestrants. They can be used to remove rust and scale from iron and steel  in immersion tanks but also oil, grease and some air-dried paints.  They will not attack or cause hydrogen embrittlement in ferrous alloys and there is markedly less tendency for re-rusting to occur than with acid pickling.

ARDROX® 185L is usually used at a concentration of 30-50% by volume in water, depending on the amount of rust or scale to be removed. This corresponds to a concentration of 200 - 375 g/L of ARDROX® 185 in water. ARDROX® 185 must always be dissolved in cold water. There will be an exothermic reaction and the solution will heat up to 50-60°C / 120-140°F. The ARDROX® 185L is applied by immersion between 82 and 93°C (180 and 200°F). Agitate with mechanical agitation, do not use air agitation.

The immersion time will vary according to the degree of contamination, light rust being removed in approximately 10 minutes while heavy rust may take about an hour. If the components are heavily contaminated with oil or grease, the life of the ARDROX® 185L  bath will be prolonged if they are first degreased (e.g. with an ARDROX 6-series product).

When used in conjunction with the adequate other ARDROX® specialties (sold separately), ARDROX® 185L can be used to remove scale from hot-end jet engine components. It can also be used for cleaning parts made of titanium.

Thorough water rinsing must take place after the use of ARDROX® 185L. If no further immediate surface treatment is to follow, the use of a dewatering and protective fluid such as an ARDROX® 3-series is desirable to give protection from re-rusting.

The ARDROX® 185L  comes in a 5-gallon and 180-liter containers while the 185 powder in 25 kg bags.

Qualifications / Approvals:

SAE - ARP 1755B ( conformance )

CFMI - CFM56

Rolls Royce - CSS244 OMat

SNECMA - DMR 70-620

GE SPMC 70-80-04

Pratt Whitney - SPMC 70-12-00

Turbomeca

For additional information please refer to the attached documentation.

NYCO HYDRAUNYCOIL® range of products includes mineral and synthetic fluids for hydraulic systems and circuits subjected to high and low temperatures, resistant to fire, extreme pressure and corrosion, and biodegradable. NYCO HYDRAUNYCOIL® fluids are shock-strut fluids. The main hydraulic fluids used in civil aviation are phosphate ester based fluids produced by Exxon-Mobil and Eastman Skydrol.

Different NYCO HYDRAUNYCOIL® hydraulic fluids are available addressing the requirements of specific sectors/applications:

FH & EL series for the Automotive & Industrial sectors,

FH 14 recoil and hydraulic system fluid

FH 19 recoil and hydraulic system fluid for Navy vessels

FH 51 hydraulic fluid used on all types of aircraft

FH 5 AW / 6 AW fluids dedicated to Boeing aircraft in operation, after overhaul and under storage. Also available for Airbus aircraft.

FH 42 synthetic shock strut fluid for new generation aircraft

FH 2 helicopter and fighter jet system fluid

Applications

Aeronautical: damping fluid for landing gears (initial assembly at the main OEMs), fluids for helicopters and combat aircraft, actuators, THS (Tail Horizontal Stabilizer), test bench, etc.

Military: mobile equipment, artillery, gun-mounts, tanks, missile hydraulics, etc.

Automotive: biodegradable hydraulics for public works, lifting and marine equipment, etc.

Industrial: dams, drill bits, etc.

For more information on NYCO HYDRAUNYCOIL® fluids please refer to the supplied documentation.

NYCO and ANDEROL® ROYCO® oils, greases, fluids and specialty products are used in aircraft of Russian and Ukrainian manufacturers meeting the corresponding specifications. Most of their products are included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

The SWAGELOK® Company is a global supplier of a range of products including fittings, valves, hoses, regulators, medium- and high-pressure products, process instrumentation, quick-connects, measurement devices, tubing and tools, filters, sample cylinders, MPC modular systems, pre-engineered subsystems (PrESS), welding systems, leak detectors, lubricants, and sealants.

SWAGELOK® Goop™ thread lubricants reduce installation time by easing the assembly of leak-tight thread connections for a variety of metals and alloys. Oil-based BLUE Goop® thread lubricants can be used on stainless steel, steel, titanium, aluminum, and nickel based alloys for temperatures up to 400° F (204° C). Halcocarbon based PURE Goop® can be used on titanium, stainless steel, steel, and nickel based alloys for temperatures up to 350° F (176° C) while Oil-based SILVER Goop® thread lubricants can be used on stainless steel, and high temperature alloys for temperatures up to 1500° F (815° C). Offered in different packaging options: 1 oz. (29.5 cm3) tubes (PURE/SILVER Goop®), 2 oz. (59 cm3) tubes (BLUE Goop®) and 1 lb. (450 g) cans (BLUE/PURE/SILVER Goop®). According to the selected product, they resist or prevent galling. 

SWAGELOK® Snoop® liquid leak detectors detect gas leaks in hard-to reach areas. They are non-corrosive and non-flammable. Contain corrosion inhibitor for added protection. SWAGELOK® Snoop® liquid leak detectors can be used over a temperature range of 27° to 200° F (-2° to 93° C). For lower temperatures, –65°F (–54°C) SWAGELOK® Real Cool Snoop® liquid leak detectors can be used. Offered in different containers: 2 fl oz./59 ml (Snoop®), 8 fl oz./236 ml (Snoop®/Real Cool Snoop®) and 1 gal/3.8 l (Snoop®/Real Cool Snoop®).

SWAGELOK® also offers SWAK™, PTFE Tape, and PTFE-Free pipe thread sealants. For more information on SWAGELOK® products please refer to the supplied documentation. 

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA AVIATION HYDRAULIC FLUIDS & PRESERVATIVES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA engine oils and greases please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

The AVIATIONEU NEW ERA aviation lubricants form part of our own labelled (AVIATIONEU NEW ERA) product portfolio  and include an extensive range of piston and turbine engine oils, greases, hydraulic, coolant and other fluids used in a variety of applications in general aviation as well as commercial (transport) and military aircraft of Russian manufacturers, such as Ilyushin Mikoyan, Irkut, Sukhoi, Tupolev and Yakovlev (now merged and operating under a new company, United Aircraft Corporation), Ukrainian (Antonov), and others.

The AVIATIONEU NEW ERA lubricants are analogues and offered as cost effective alternatives to AEROSHELL®, EXXONMOBIL®, NYCO, LUKOIL®, ANDEROL®, ROYCO®, and other lubricants used in aircraft of Eastern manufacturers. Sourced from various quality producers, the AVIATIONEU NEW ERA aviation lubricants are offered in different packaging options (*) in liters or kilograms, depending on the lubricant and the producer.  OEM brands are also included in our offered product range and can be furnished through our current network of co-operating suppliers. Please refer to the supplied table(s) and presentations listing their respective products. Due to our continuously expanding list of suppliers and the respective range of offered products, certain products may not be currently listed in our Web Platform for Supplies. In this case please contact us for additional information and assistance.

An overview of offered AVIATIONEU NEW ERA GREASES is included in the Product Description section serving as a Quick Guide. For AVIATIONEU NEW ERA ENGINE HYDRAULIC FLUIDS & PRESERVATIVES and ENGINE OILS please refer to the respective separate product presentations. 

(*) Depending on the lubricant and the producer, AVIATIONEU NEW ERA aviation lubricants are offered in cans, pails, flanks, drums or other containers with the following indicative capacities:

 0.9kg/1L, 3.6kg /4L, 4.5kg /5L, 9kg /10L, 15.3kg, 27kg /30L, 54kg /60L, 91kg /100L, 182kg /200L.

LUKOIL® LUBRICANTS brand relates to an extensive range of lubricants serving the needs of applications in different markets worlwide, from passenger cars, commercial vehicles and small engines to aviation, marine and industrial uses. LUKOIL® LUBRICANTS portfolio includes among others motor oils, transmission, gear, compressor, turbine, gas engine, machine sideway, rolling mill, circulating, quenching oils, hydraulic and coolant fluids and greases. They are available in in different packaging options. 

A brief description of LUKOIL® lubricants  which can be furnished through our network of co-operating suppliers is included in the Product Description section. For additional information please refer to the supplied documentation or contact us.

Note: Supplied information is provided for reference only. For the selection of the suitable lubricant please observe the manufacturer's instructions.

CRC® INDUSTRIES is a global leader in the production of specialty chemicals for maintenance, repair and operational professionals and do-it-yourself applications. CRC® product portfolio includes an extensive range of cleaners, corrosion inhibitors, lubricants & penetrants, adhesives, appearance and specialty products serving the automotive, industrial, electrical, marine, heavy truck, hardware and aviation markets. Selected products are briefly presented at the Product Description section and additional information can be found in the supplied documentation.

EXXONMOBIL® MOBIL™ SHC™ 500 Series oils include Mobil SHC™ 524, 525, 526 and 527 very high performance hydraulic oils formulated from synthesised, wax-free hydrocarbon base fluids combined with a carefully engineered super-stabilised additive system. 

They feature exceptionally high quality, wide-temperature, shear-stable hydraulic oils with controlled low-temperature pumpability properties and maximised anti-wear protection for high-pressure vane, piston and gear pumps. Their very high viscosity indexes contribute to their excellent low and high temperature performance making them an excellent choice for equipment subjected to a wide range of start-up and operating temperatures. They exhibit outstanding shear stability allowing their use in high-pressure, high-temperature operating environments for extended periods of time without the loss of critical lubrication characteristics. They reduce energy consumption by up to 6.2 percent compared to conventional hydraulic oils.

Features & Benefits of MOBIL™ SHC™ 500 Series Oils 

Design-Specific Synthetic Base Stock Extends service intervals | Cleaner systems and reduced close-tolerance valve sticking compared to conventional products | Improves filterability

Exceptional Anti-wear Reduces wear of components | Protects various metallurgy systems

High Viscosity Index Wide temperature range performance | Ensures equipment protection at cold start-up temperatures | Protects system components at high operating temperatures

Outstanding Oxidation Stability Provides long oil and equipment life extending filter life

Excellent Corrosion Protection Prevents internal hydraulic system corrosion | Reduces the negative effects of moisture in systems | Provides corrosion protection of multi-metallurgy component designs

Very Good Multi-metal Compatibility Optimizes inventory requirements

Meets a Wide Range of Equipment Requirements One product replacing several for optimization of inventory requirements and mitigation of product misapplication

Excellent Air Separation Characteristics  Reduces foaming and it's negative effects

Controlled Demulsibility Provides systems protection and lubrication where small quantities of moisture are present | Readily separates larger quantities of water

Innovative Keep Clean Properties Reduces system deposits and potential sludging | Protects critical components, improving system response and minimizing valve sticking

For additional information please consult the Product Description section.

Manufactured by RADCO INDUSTRIES, RADCOLUBE® is an exceptional 3-in-1 Gun Oil for cleaning, lubricating, and short-term preservation of small and large caliber firearm platforms making their maintenance safe & convenient . With its advanced formulation and adherence to industry standards, this gun oil guarantees superior performance, reliability, and longevity for firearms used in diverse environments. It is the trusted brand of the US Military, Law Enforcement, and Competitive Shooters across the globe. RADCOLUBE® CLP Gun Oil 3IN1 is also the preferred firearm cleaner and lubricant of The Tactical Games™ (TTG) , Multi-Gun Competitors, Extreme Long Range Shooting Organization™ (ELRSO) and King of 2 Mile™ (KO2M) shooting organizations.

RADCOLUBE® CLP keeps small & large caliber weapons in optimum condition and can be used in harsh environments, including cold, salt & dust. It maintains maximum firing performance maintaining any weapon’s maximum firing rate without incident.

Being a Military-Grade CLP gun cleaner and lubricant, RADCOLUBE® CLP  addresses all aspects of the cleaning process, simplifies firearm maintenance, adheres to MIL-PRF-63460F specifications and meets the qualifications of DOD.

RADCOLUBE® CLP has a maximum recommended shelf life of 6 years from date of manufacture.

For additional information please consult the supplied documentation.

TOTALENERGIES (formerly TOTAL)  has developed a comprehensive range of Hydraulic Oils included in HYDRANSAFE product family. 

HYDRANSAFE HFA E3 and HFA S5 are intended for use in hydraulic systems in Aviation, Steel, Metalworking, Energy, Chemicals, Food processing, Textile, Automotive Manufacturing, Wood and Paper, Cement & Materials, & Mining sectors. Can be used on hot pressing machines and systems specially designed for low-viscosity aqueous fluids. Operating temperatures: +5 °C to +55 °C. HYDRANSAFE HFA E3 features an excellent stability overtime, good antiwear properties, excellent anti foam properties, good anti-corrosion, anti-rust properties even with a soft water, and good resistance to bacterial growth. HYDRANSAFE  HFA-S5 solution has a very low foam tendency and is compatible with the usual type of elastomers used in HFA type of hydraulic installations (ISO 6072 NBR and FKM). Provides excellent protection against corrosion to metals normally used in hydraulic systems (ISO IP 287) and features a high resistance to bacterial and fungal growth. Its durability reduces maintenance - with service intervals longer than mineral oil based HFA emulsions (type HFAE fluids).

HYDRANSAFE HFC-E 46 & HFC-E 68 are non flammable (fire resistant) & biodegradable  water based hydraulic fluids, boosted in antiwear and anti corrosion additives to match mineral based performances on pump tests and replace standard mineral oils with equal equipment protection. Both are intended for use in applications in Steel, Automotive Manufacturing, Mining, Aluminium, Construction Equipment and Mining industries. Designed to work on all kind of hydraulics pumps in various conditions, in mobile and stationary equipment. Ultimately biodegradable to facilitate usage in sensitive areas such as undergournd mining, agriculture, tunelling etc. they provide superior fire protection compared with standard HM or HFDU oils without compromising mechanical performances. They absorb water enabling usage in environments subject to high water contamination.

HYDRANSAFE HFDU 46, HFDU 68, and HFDU LC 168 Biodegradable hydraulic oils are recommended in the event of incidental leaks into the environment. They feature  considerable fire resistance, and exceptional lubricating properties which guarantee a substantial reduction in wear, and therefore a longer service life of the hydraulic components. They exhibit a high flash point and high spontaneous ignition temperature, low pour-point providing good performances at low temperature, very good anticorrosion properties enhanced service life, and a very high natural viscosity index guaranteeing a viscosity constantly adapted to the temperature range in which the fluid must be used. Operating temperature: -10 °C to +70 °C on a continuous basis, +120 °C at peak periods.

For additional information please consult the Product Description section and the supplied documentation.

EASTMAN SKYDROL™ Aviation Hydraulic Fluids were developed to meet the requirements established by manufacturers and backed by recognized experts in phosphate ester technology. SKYDROL™ was the first fire-resistant hydraulic fluid in the industry and today remains the most advanced aviation hydraulic fluid. SKYDROL™ aviation hydraulic fluids include:

SKYDROL™ PE-5,  a Type V, fire-resistant hydraulic fluid offering the longest fluid life of any phosphate ester fluid available today, even under high moisture conditions. Key benefits include less frequent fluid replacement, reduced disposal volume and lower environmental footprint. Meets BMS3-11P Type V, Grade A & C specification.

SKYDROL™ 5, a lighter-weight hydraulic fluid due to its lower density resulting in fuel savings.  SKYDROL™ 5 is the first aviation hydraulic fluid demonstrating erosion-resistance at higher temperatures leading to decreased maintenance and downtime. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ LD-4, the world’s best-selling Type IV aviation hydraulic fluid, featuring low density, valve erosion prevention, and deposit control. Erosion resistance is made possible by a breakthrough anti-erosion additive and acid scavenger included in the formulation. Meets BMS3-11P Type V, Grade B & C specification.

SKYDROL™ 500B-4, the only commercially available standard-density aviation hydraulic fluid offering additionally improved erosion resistance, as it contains the same anti-erosion additive and acid scavenger as LD-4. Meets BMS3-11P Type IV, Class 2 specification.

For additional information please refer to the supplied documentation or contact us.