SAFRAN AEROSYSTEMS, part of SAFRAN GROUP, is the world's leading supplier of safety and protection systems with a wide inflatable product and systems' portfolio including aviation life vests, life rafts, escape slides,  helicopter emergency flotation systems for commercial and military aicraft and helicopters. Other company products include crew and passenger oxygen systemsand military aircraft arresting systems.

NEW ZODIAC AIR CRUISERS auto-inflatable emergency life vests / preservers now form part of SAFRAN AEROSYSTEMS product range after ZODIAC AEROSPACE has joined SAFRAN GROUP in 2018  to create the world’s third largest aerospace company (excluding aircraft manufacturers). SAFRAN AEROSYSTEMS aviation life vests are viewed as the lightest on the market, meet TSO and ETSO requirements and are widely used by crew members and passengers worldwide. They are offered in two configurations (one or two inflatable chambers) and are available in all sizes: adult, adult/child, baby/small child or universal.

SAFRAN AEROSYSTEMS aviation life rafts are lightweight and innovatively-designed products. With a capacity of 1 to 56 persons, their product range meets the needs of not only commercial airplanes but also business jets and military aircraft.

As a key player in the evacuation slide market, SAFRAN AEROSYSTEMS equips most commercial aircraft platforms (e.g. Boeing, Airbus, Comac, Irkut, Bombardier, Sukhoi, Illyushin, Tupolev…) and many military aircraft such as the Lockheed C-5 Galaxy or the Boeing KC-135 and KC-46. For additional information please consult the supplied documentation.

High Pressure Strut Valve with Small Diameter Thread Adapter. Fits in nose gear of certain Cessna models.

The RAY ALLEN Trim Systems are trim servos of flight surfaces offered with different travel options designed specifically for experimental aircraft. RAY ALLEN servos are small enough to fit in individual control surfaces or can be used with lighweight springs acting directly on the control system. They come with RS2 rocker switches,  RP3 LED indicators and a RC8-7 clevis/pushrod kit. All RC ALLEN indicators operate off of feedback sensors located inside the servo. These feedback sensors are purposefully isolated from the power supply to the servo motor to guard against possible electronic failure.  Different servos are available:

T2-7A Trim System with a  .7" (17mm) travel

T2-10A Trim System with a  1.0" (26mm) travel

T3-12A Trim System with a 1.2" (31 mm) travel

T4-5 Trim System with a .5 inch (13mm) travel. This servo does not have a compatible indicator.

Technical Specifications as follows (RAC  Model / Output Shaft Movement / Travel Time):

T2-7A /  0.7 in. / 10 sec.

T2-10A / 1.0 in.  / 16 sec.

T3-12A /  1.2 in.  / 19 sec.

T4-5 / 0.5 in. / 15 sec.

Parker Hannifin (Cleveland Aircraft Wheel & Brake Division) designs and manufactures wheel assemblies for worldwide aircraft markets. Their wheels, used in conjunction with tires, provide support for the weight of the aircraft. Combined with brakes, they assist in directional and stopping control during aircraft ground maneuvers, taxi, takeoff, and landing. Cleveland Wheels and Brakes brand products are used on more than 80 percent of general aviation aircraft while their wheel assemblies  are now offered for military and business aviation applications. Cleveland's different product lines include both aircraft wheel and wheel and brake assemblies for nose and main wheels to meet a variety of application requirements.

Nose Wheel Assembly Features:

• Low maintenance for tubeless or tube-type

• Tapered roller bearings for dimensional stability and long life

• Molded grease seals for superior bearing bore sealing properties

• Split-rim design to allow ease of tire mounting

• High-strength through-bolts

• Sand castings and forgings

• Worldwide distributor network for quick parts availability

Cleveland's #40-77 Nose Wheel assemblies (FAA-TSO-C26c approved) are designed for 5.00-5 tube tires and intended for use in general and business aviation, turboprop passenger, and helicopter applications.

FAA 8130-3 Release Certification is available at additional cost. Please specify at the time of ordering.

For more information on the parts and quantities per assembly please refer to the respective illustrative parts list or contact us.

(NCNR) product: non-cancellable/non-returnable once the order is placed. Often requires  backordering to the manufacturer. Delivery time cannot be specified.

5 inch wheel with 4.3 inch width with an additional 1.39 inch caliper spacing. 

AVIATIONEU NEW ERA RNB brazed seam lug type battery terminals are made from brass and are tin plated. They can be used for control cabinets & similar applications. The seam in the barrel of the terminal is brazed allowing the terminal to be crimped in any position around the barrel, which helps give extra wire holding strength. They comply with DIN 46234 standard for solderless terminals. Solderless terminals are used in crimping with several, fine and super-fine stranded conductors. However, solderless terminals according to DIN 46234 are not suitable for single-stranded solid conductors.RNB terminals can be used with different wire sizes (American Wire Gauge  AWG) 22-2 and stud sizes. Please refer to the specifications table.  IMAX: 19A/27A/37A/48A/62A/88A/115A/160A. Sold in packs of 100 pieces each with Minimum Order Quantity (MOQ) 20 packs. The appearing price is for reference only. Please contact us for quotation.

TEKNOFIBRA® is a leading manufacturer of aircraft firewall, exhaust, electrical, fuel system heat and sound absorbing materials. TEKNOFIBRA® product range includes Heat Reflecting Panels, Sleeves, Contacts and Aluminum Adhesive Tapes. The impressive heat-reflecting and insulating characteristics of Teknofibra® products ensure resistance and protection, even at extreme temperatures. Their lightness (lighter in weight than competition) makes them the perfect insulation for aeronautical uses. The organic composition of Teknofibra® non-woven fabric guarantees maximum safety and non-toxicity in every situation. In the event of a fire, no harmful emissions are produced, preserving total safety. Sound absorbing Teknofibra® panels dramatically reduce excessive noise that can distract and compromise results. TEKNOFIBRA® products are widely used in the Aviation, Car Racing and Motorcycling fields.

TIMKEN® tapered roller bearings are characterized by reliability, versatility and choice. They stand up to extreme situations, including high-corrosive, high-temperature, vacuum or low-lubrication environments. Uniquely designed to manage both types of loads on rotating shafts and in housings and offer a choice of nearly 26,000 product combinations, from single, double to four-row configurations and thrust bearings. Each bearing contains four interdependent components: the cone (inner ring), the cup (outer ring), the tapered rollers (rolling elements) and the cage (roller retainer). Tapered angles allow bearings to efficiently control a combination of radial and thrust loads. The steeper the outer ring angle, the greater ability the bearing has to handle thrust loads. To provide a true rolling motion of the rollers on the raceways, the extensions of the raceways and the tapered surfaces of the rollers come together at a common point, the apex, on the axis of rotation.

TIMKEN® Single Row (TS) bearings are basic and most widely used. Usually fitted as one of an opposing pair. They can be “set” to the required clearance (endplay) or preload condition to optimize performance. TSF type bearings, a TS variation, have a flanged outer ring to facilitate axial location and accurately aligned seats in a through-bored housing.

TIMKEN® Double Row Outer Ring bearings (TDO)  have a one-piece (double) outer ring and two single inner rings. Usually supplied complete with an inner-ring spacer as a pre-set assembly. They offer a wide effective bearing spread and frequently chosen for applications where overturning moments are a significant load component. Other bearing types include TDI (double-row double inner race) and TDIT (same as TDI with tapered bore). Both comprise a double inner ring and two single outer rings. Usually supplied complete with an outerring spacer as a pre-set assembly. TDI and TDIT bearings can be used at fixed (locating) positions on rotating shaft applications. Offered types include: TNA (double-row non-adjustable), TNASW (same as TNA with lubricant slots) or TNASWE  (same as TNSW with extended back face rib). They are similar to the TDO with a one-piece (double) outer ring and two single inner rings.  Supplied with a built-in clearance to give a standard setting range, these bearings provide a solution for many fixed or floating bearing applications where optimum simplicity of assembly is required.

For aerospace applications, different FAA PMA approved tapered single roller bearings are offered including TIMKEN® 13600, 13800 and LM813000 Series with a cone assembly and a cup. Offered in "inch" and "metric" versions LM813000 Series feature  minimization of friction between the rotating parts, handling of thrust loads, even load distibution across the roller, heavy load carrying capacity & stamped steel cage.

For additional information please refer to the supplied documentation.

AIRBUS HELICOPTERS is one of the three divisions of EUROPEAN AERONAUTIC DEFENCE AND SPACE CO (EADS), a European aerospace corporation which designs, manufactures and sells civil and military aerospace products worldwide. The other two divisions are  Commercial Aircraft and Defence and Space. AIRBUS civil helicopters, grouped in families range from single- and twin-engine light and medium rotorcraft, up to those in the eleven-ton-class and aim to handle any and all civil missions. Civil range of AIRBUS HELICOPTERS includes:

H125 and H130 intermediate single engine helicopters,

H135 and H145 light twin engine helicopters,

H155 and H160 medium twin engine helicopters,

Eurocopter AS365 Dauphin (formerly known as Aérospatiale SA365 Dauphin 2) medium-weight multipurpose twin engine helicopter,

H175 super medium twin engine helicopter,

H215 and H225 heavy twin engine helicopters

Components and parts for the above helicopters are offered on demand as OEM or PMA parts in NEW or USED condition. These include among others rotables, blades, hardware, structural and engine parts.

PMA parts are generally listed in separate product presentations of their respective manufacturers. 

Please contact us for additional information.

Since its introduction in 1994, the B&C SPECIALITY PRODUCTS BC320 Starter for Continental engines has established an impressive service record as the ONLY starter design on the market that has provided reliable, long-term service for these engines. 

Suitable for installation on Continental engines (C-75, C-85, C-90, C-145-2, O-200, IO-240, O-300-A, -B, and -C, and GO-300-A, -B, and -C) it solves all the problems that other starter designs have had:  worn-out clutches, broken pinions, nagging oil leaks, and catastrophic failure modes. Featuring the durability of all-steel gears and heavy-duty ball-bearings, and the efficiency of a high-torque series-wound motor, it provides greater starting torque, while saving 4.3 to 5.2 lbs. over the old key-type and pull-cable type starters (respectively).

The B&C SPECIALITY PRODUCTS BC320 Starter is STC-PMA approved for use in certificated aircraft, and is available with or without the STC (*). Two installation kits are also available:  one for replacing a key-type starter (Installation Kit 501-1), the other for replacing a pull-cable type starter (Installation Kit 501-3). For key-type starters, before installing the BC320, you will need to remove the needle bearing pressed into the engine case & install the supplied plug in its place. For pull-cable starters, before installing the BC320, you will need to cut off the 9/16 steel shaft that is installed in your engine case.

Other versions of BC320 Starter for 12v and 24v electrical systems (BC320-2, 12v Counter-Rotating or the 24v BC320-3) are also available.

(*) For the issue of the STC, the aircraft make and model, aircraft registration and serial number are required.

Gill has become the OEM "original equipment battery" for Raytheon, Cessna, LearJet, Mooney, Piper, Ayres, Airtractor, Maule, Scheizer and other commercial, private and military aircraft  in the aviation industry and continues to be the industry's choice for quality battery products. In addition to the traditional Dry Battery line, Gill offers the LT Battery Sealed products featuring improved shelf life, lower weight, dependability, durability, high reliability, improved energy density, robust construction, testing and approval to DO-160E as well as FAA/PMA approval.

LT Series Batteries are fully recyclable and ship Hazmat exempt (Non Dangerous Goods).

Terminal blocks (aka terminal board assembies) are connectors that terminate a single wire and connect it to a circuit or other system. In their simplest form, they consist of several individual terminals arranged in a long strip. Terminal blocks come in a range of shapes, sizes and ratings and they are used in a range of applications including aircraft, cars, vessels and others. Those manufactured as per Military Standard MS27212 (superceded by SAE-AS27212) are  used in aircraft. 

R&B ELECTRONICS MS27212 & AS27212 Series Terminal Board/Kits are offered in different series. Studs are made from Corrosion-Resistant Stainless Steel (CRES)while insulation material is Diallyisophthalate GDI-30F. .

R&B ELECTRONICS MS27212 & AS27212 Product Eatures:

Molded-in-stud electric terminal boards

Excellent corrosion resistance

Excellent dielectric strength

Excellent moisture resistance

Resistance to thermal shock

Total Continuous Rating: (155 DEG. C / 311 DEG. F).

Maximum Torque:

MS27212-1 (6-32 UNC-2A STUD) 22 in. pounds max. 

MS27212-6 (8-32 UNC-2A STUD) 32 in. pounds max.

MS27212-2 (10-32 UNF-2A STUD) 40 in. pounds max.

MS27212-3 (1/4-28 UNF-2A STUD) 150 in. pounds max.

MS27212-4 (5/16-24 UNF-2A STUD) 170 in. pounds max.

MS27212-5 (3/8-24 UNF-2A STUD) 170 in. pounds max.

For additional information please refer to the supplied documetation.

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. They are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed and is available please mention during the order placement. In this case, additional cost may apply.

Inner tubes are also offered for tube type tires which generally share the same designation as the respective tire (e.g. a 5.00-5 inner tube fits a 5.00-5 tire) with exceptions when the inner tube can fit more than one aircraft tyre size (e.g. the 5.00-5 inner tube can be used in both the 5.00-5 as well as the 15×6.00-5 tires). Inner tubes are supplied with valves of different designs (e.g. straight or 90º bend valves) carrying respective designations. Accessories such as French Chalk, Valve Caps, and Cores are also available on request. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

The company SPECIALTY TIRES OF AMERICA (formerly McCREARY TIRE & RUBBER providing automotive tires) manufactures a wide range of aircraft tires under different brands including SUPER HAWK®, AIR HAWK®, AIR TRAC®, AERO CLASSIC® & AERO TRAINER® as well as matching tire tubes. Different brands (series) briefly presented below are separately listed. For more information please refer to the supplied documentation.

SUPER HAWK® tires are the best choice when  the highest levels of performance and extra-long tread life are required. Designed to handle higher landing speeds and heavier loads, these tires combine advanced design & over 90 years of precision tire craftsmanship resulting in premium belted aircraft tires that surpasse FAA specifications and match the performance of more expensive brands.

AIR HAWK® tires are premium grade & priced tires, but provide longer service life. Excellent choice for a wide range of applications. Improved tread compounds and high-strength casings offer added wear resistance and an extra measure of security. AIR HAWK® tires are FAA approved and tested by thousands of pilots, delivering a reliable, cost-effective performance under a wide variety of takeoff and landing conditions. 

AIR TRAC® fine nylon cord narrow-ribbed, oval shaped tires are designed for soft field applications and rigidly tested to meet FAA Standard TSO-C62. The  AIR TRAC  tires consist an excellent choice for single engine, piston aircraft. Thesy are ideal for aircraft operated on grass strips while being perfectly usable on hard surfaces. These tires are are original equipment on many of today’s aircraft and offer a great performance in an economical tire. AIR TRAC® tubes are the perfect match to the AIR TRAC®  tires. 

AERO CLASSIC® tires are designed specially for classic planes including warbirds, DC-3's, and Beech 18's, often the only manufacturer producing tires for these aircraft. The product line includes over 50 tires and tubes, from 8" diameter for tailwheels, up to 56" diameter C-130 inner tubes. AERO CLASSIC® tubes are tested to MIL-I-5014F standard. 

AERO TRAINER® tires are designed for flight schools with single engine trainers. They combine the high quality and durability with a competitive price.

SPECIALTY TIRES products are supplied with a standard Certificate of Conformance. If an FAA/EASA Form is needed (depending on the ordered item) please mention this during the order placement. In this case, additional cost may apply.

MONARCH D.C. Hydraulic Power Systems are offered in standard M-200, M-300 and M-3500 model series featuring a wide selection of power unit sizes and performance to satisfy most O.E.M. applications, hardcoated pump end plates for unmatched durability in demanding environments and severe duty applications and externally adjustable relief valve with lock nut. Over two million of M series pumps have been sold and used in a variety of applications, including: dump bed kits, dump trailers, auto hauler trailers, compactors, scissor lifts, security gates, lift gates, tow trucks, snow plows, hay bale spikes, handicap ramps/lifts, motorhome slideouts, custom projects, etc. Please refer to the attached documentation for specifications & additional information on offered hydraulic power systems.

The P1 momentary switch is a sealed, dustproof, snap action, MIL qualified switch ideal for switching low level up to 10 amps. It features screw terminals, and includes screws, lockwashers, and solder lugs.

Product Features:

MIL qualified 

Dustproof, snap action, screw terminals, rugged reliable construction

Threaded or Press Fit Bezel with Black, Red or White Color Button (depending on selected model)

Button sealed with patented “rolling sleeve” principle

Contact area sealed at button & terminals

Less than 25mOhm contact resistance

Ideal for low level switching as well as up to 10 amp duty

Positive tactile feedback

Product Specifications:

Electrical: (at 28VDC or 115VAC, 60/400 Hz.)

Load / Amperes / Life (Normal)

Resistive / 10 / 25,000 cycles

Inductive/Motor / 5 / 25,000 cycles

Lamp / 5 / 25,000 cycles

Gaskets & other sealing parts for use on Textron Aviation Cessna, Beechcraft and Hawker aircraft. Also available as FAA-PMA approved parts from other manufacturers.

McFARLANE® AVIATION MC0543022-2 Series FAA-PMA approved nose wheel steering rods s are intended for use on for Cessna 172 series aircraft replacing respective OEM steering rod,tube assemblies.They feature new re-designed long-life springs, hardened internal washer for greater durability, stainless steel tubes for improved corrosion resistance  and optimum performance even after years of service.

Cessna Models' Application List:

172D,E,F,G,H,I,K,L,M,P

P172,

R172K

F172D,E,F,G,H,K,L,M,N,P

FP172

FR172E,F,G,H,J,K

172R

172S

Aviation Fire Extinguishers by H3R Aviation, Inc. include Halon, Halotron 1, Halotron BrX and wheeled  fire extinguishers. They are considered Hazardous Materials (HAZMAT) with respective packaging & certification requirements.

H3R RT Series Liquefied Gas Portable Extinguishers are popular general aviation fire extinguishers, and standard equipment on many light aircraft due to their light weight,  low maintenance and a 12 year shelf life. They contain a unique blend of liquefied gas 1211/1301, two highly effective fire fighting agents. These units are self expelling which means that the pressure remains constant even when the extinguishers are almost empty. They are available in different models with respective charge weights in lbs.

H3R A344T Halon 1211 Aircraft Fire Extinguisher is the company's smallest fire extinguisher with a gauge, similar in size but heavier than the Halon blend model RT A600. Recommended for a 1-4 person aircraft, including the pilot.  

H3R C352TS and C354TS models of Halon 1211 fire extinguishers can be used for cockpit/cabin and is found on a wide variety of commercial and general aviation aircraft, from Boeings to Cessnas. C352TS fire extinguisher is of same size tand uses the same mounting bracket with C354TS model except that the C354TS  fire extinguisher carries twenty percent more Halon 1211 than C352TS.

H3R  Halotron 1 series of fire extinguishers use Halotron® 1 the most widely tested and accepted Halon 1211-alternative agent for streaming applications. Just like Halon 1211, Halotron® 1 expels as a rapidly evaporating liquid and leaves no residue.

H3R Halotron BrX series of fire extinguishers use Halotron BrX clean agent making them ideal options for those seeking to replace Halon 1211 fire extinguishers due to regulatory or environmental considerations. Halotron BrX is a UL, ISO, EN, EASA and FAA compliant Halon 1211 alternative. A low GWP and very low ODP allowed Halotron BrX to be approved for use on commercial aircraft. 

For more information on H3R fire extinguishers please consult the Product Description section.