GARMIN® GTX™ transponder product line includes Mode A/C and Mode S TSO'd panel mounted transponders offered in a‭ ‬wide variety of configurations to choose‭ ‬from‭, ‬depending on desired functions‭.‬ Different models are listed under separate product presentations. 

GARMIN® GTX™ 325  is a Mode A/C panel-mounted full-featured, TSO'd certified transponder offering a simple, affordable replacement for standard Mode C transponders. It features aural alerts, total air temperature (TAT), pressure altitude readout, altitude monitor function, density altitude readout, built-in timers and automatic ALT/GND mode.  ‬It replaces the popular GTX™ 327 ‬and is essentially the same unit‮—‬but carries the GTX™ 335/345‭ ‬display and button layout‭. ‬It would be a meaningful ‬choice for the replacement of an older Mode C ADS-B‭ ‬Out transponder. 

EASA Certified 10 W Comm Radio with 25 kHz spacing.

ETSO'd Slimline Panel Mounted 16 W VHF Radio with built in 2-place intercom with auxiliary inputs for stereo music and audio warnings. Available with 8.33 kHz or  25kHz frequency spacing options.

JEPPESEN NavData Databases are offered for different GARMIN AERA portable GPS models such as 500/510, 550, 695 and 795. They are available for different geographical regions. JEPPESEN NavData databases can be included only in the respective orders of GARMIN AERA GPS units. Orders for these database and their updates are fulfilled by AVIATIONEU TRAINING SYSTEMS & SERVICES which offers aviation database services, in cooperation with respective database providers, on a simplified subscription-based ordering process saving man effort, time and costs for customers. Please refer to our listed services or contact us for additional information.

United States Military Standard RG58 Coaxial Cables are flexible and lightweight coaxial cable with a solid 20 American Wire Gauge (AWG) conductor, a 50-ohm characteristic impedance and maximum voltage rating of 1,900 volts. They feature a low-density polyethylene dielectric insulation with a dielectric constant of 2.3 and a diameter of 0.116 inches (2.9mm), a tinned copper braided shield and a PVC jacket. The outside diameter of the cable is 0.195' (4.95 mm), which makes it suitable for indoor and vehicular use where size matters. It is best for signal frequencies up to 1GHz, where its attenuation is 14.5 decibels per 100 feet. Above that frequency, attenuation increases, and at 5GHz it is approximately 60 dB/100 ft. RG58 coaxial cable supports 10Base2 Ethernet.

These cables come in different versions (types) corresponding to different conductors including RG58 (pure annealed copper conductor), RG58/U (single solid core copper conductor), RG58A/U (multi-core tinned copper conductor with generally low loss foamed insulation)  or RG58C/U (multi-strand tin-plated copper conductor and polyethylene solid core). RG58 A/U Coaxial Cables with PVC jacket are ones most used in WiFi, Wireless LAN, GSM, and Monitoring and Control of Network Infrastructure Sites. Also they are standard cables for avionics installations in experimental (non-certified) aircraft.

The mil-spec coaxial specification version of RG58 is the M17/28-RG58 Coaxial Cables. These cables are like their standard RG58 counterparts except that they feature a stranded tinned copper conductor and the outer conductor is a 36 AWG tinned copper braid.

RG58 Coaxial Cables are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. Sourced from quality manufacturers they priced and sold by the foot or meters (depending on the manufacturer). They can be furnished in standard or cut to order lengths.

Connectors compatible with RG58 coaxial cables are also offered and include BNC bayonet connectors, Low-Profile screwed TNC connectors and screwed FME connectors.

(*) The letter "U" means indicates that the conductor of the cable is copper while letters "A", "B", "C" are used when the conductor is aluminum thin.

HONEYWELL BENDIX KING® KX 155A and KX 165A TSO'd Panel-Mounted NAVCOMM Transceivers update the concept of the combined navigation and communications radio for the 21st century. With such features as programmable comm channels, support for 8.33 kHz Comm tuning (KX 165A model only), GPS QuickTune, multiple operating modes, remote channel increment with flip-flop tuning & a built-in timer, they combine a sophisticated appearance with a number of advanced capabilities including:

Programming of up to 32 Comm channels in a non-volatile memory circuit for ready recall of regularly used frequencies.

Pre-selected frequencies stored in a non-volatile memory circuit.

When interfaced to the KLN 94 GPS, both the standby Comm and Nav frequencies can be selected and remotely tuned from the GPS database.

The KX155A (a KX155 upgrade) provides access to all 200 NAV and 760 COMM frequencies, along with its optional 40-channel glideslope. In addition to its standard use, it incorporates new features including a bearing-to-station mode and a radial-from-station mode, an internal Course Deviation Indicator (CDI) for use when the external CDI is being driven by a GPS receiver, and an elapsed-time and approach timer. The KX 155A system offers 10W minimum COMM transmitter power.

The KX-165A NAV/COMM replaces BENDIX KING® KX-155, KX-155A and KX-165 NAV/COMMs which are discontinued but are still available for outright sale or in exchange for returned customer owned units in USED Serviceable or Overhauled Conditions with FAA 8130-3 Form certification. The letters "SV","OH" and "EX" in the product reference numbers (SKU) indicate the condition/sale terms. 

Very similar to KX 155, the BENDIX KING® KX 165 NAV/COMM additionally incorporates an internal VOR/LOC Converter to directly drive the BENDIX KING®  KI 525A HSI (part of the KCS 55A Compass System). It can also display the current radial from the active VOR instead of the standby NAV frequency. Other features include 10 watts min transmitter power, easy-to-read, bright gas-discharge display, large, self-dimming, microprocessor- controlled gas discharge readouts and solid-state electronic tuning for fast, accurate selection of all 200 NAV and 760 COMM frequencies.

The KX 165A (-0201 model) NAV/COMM is a slide in 8.33 kHz replacement for its predecessors, the KX 155A which is discontinued and KX 165A 25 kHz NAV/COMMs (-0101 model). Completely redesigned, it features programmable Comm channels, support for 8.33kHz Comm tuning, GPS Quick-Tune, multiple operating modes, remote channel increment with flip-flop tuning and a built-in timer.

Mounting racks, connectors and manuals  for the installation of the NAV/COMMs are also offered.

For additional information please consult the Product Description section and the supplied documentation.

The RCA 82A/83A Series TSO'd turn coordinators by KELLY MFG (RC ALLEN) can be found in many production aircraft around the world. They Incorporate an electrical gyro turn indicator with an inclinometer. The turn motion is presented by an airplane symbol banking on a fixed horizon. The inclinometer, by movement of a ball in relation to the lubber lines, indicates the slip angle of aircraft while in a turn. The airplane on the dial rotates with reference to the indices. A power failure flag drops into view whenever the supply voltage is lost or when dropped below a level acceptable for proper operation of the gyro. Operates from 11 to 30VDC. Available in lighted and unlighted versions. First installation requires electrical connector and clamp. Mating Connector: MS3106A-10SL-3S.

Product Specifications:

Meet or exceed requirements of FAA TSO C3b 

Made in the USA

Dimensions

Length: 6 1/5 in. Max

Width: 3 3/8 in Max

Height:3 3/8 in Max

Weight: 1.9 lbs.

Description: 

Unlighted

Mating Connector:

MS3106A-10SL-3S

Connector pin out:

A: +12 -30VDC

B: Ground

C: Spare

The Vertical Speed Indicators (VSI)  provide an accurate indication of rate of change of altitude. 

UMA 8-210 Series Non TSO'd VSIs are offered in 2-1/4" and 3-1/8" versions. They are temperature compensated precision instruments provided with a zero adjustment screw on the face of the case in the seven o' clock position. They are powered by the aircraft static system. They are available in different ranges such as 0-2000 FT, 0-3000 FT, 0-4000 FT, or 0-6000 FT and different dial legends: Vertical Speed, Climb, Rate of Change, Cabin Climb.

3 1/8″ and  2 1/4″ VSIs are available with internal electroluminescent lighting in 3 colors: blue-white, aviation green and red. External DC-AC inverter required.  Weight 3 1/8″: 8.8 Oz - Weight: 2 1/4″ 7.4 Oz.

Case: Valox 420 Plastic

WULTRAD INC. is a manufacturer of non-certified flight and engine instruments under FALCON GAUGE brand for experimental and homebuilt aircraft. Although their products are Non-TSO, they are made to TSO or MIL specifications for quality.

FALCON GAUGE Electrical Attitude Gyro is intended for use in experimental aircraft only. It provides a continuous visual display of the aircraft attitude with respect to the earth for maneuvering around the longitudinal (pitch), and lateral (roll) axes, and yaw. A precision AC brushless motor is featured in the electrical attitude gyro. The Power failure drops into view whenever the power is insufficient for operation of the gyro. Electrical gyro can be caged by pulling the "Pull to Cage" knob. It is offεred with or without internal lighting and is designed to work with a 12V system. Dimension: 3-3/8"X 6.46/164mm.

The R.A. MILLER (RAMI) TSO'd AV-74 (.425 Stud Length) & the AV-74-1 (.800 Stud Length) are broadband blade type antennas for transponders or DME applications. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antennas are supplied with cellular neoprene mounting pad and hardware. Designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. They have a drag force of 0.09 lbs @ 250 mph. These antennas are direct replacements for the CI-105 antennas.

Product Specifications:

Application: Transponder/DME

Frequency: 960 - 1220 MHz

Impedance: 50 Ohms Nominal

VSWR: 1.5:1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: "BNC" Female

Max Height: 3.4"

RF Power Capacity: 2.5 kW Peak

FAA TSO: C66c, C74c

UMA Non TSO'd airspeed indicators are offered in 2-1/4" and 3-1/8" Single (MPH) and Dual Range (MPH/Knots) versions for installation on experimental aircraft only. They are housed in Valox 420 plastic cases and weigh 8.6 oz. . Depending on the selected indicator, ranges are in MPH, Knots or kilometers. Some inicators are also offered as certified (FAA TSO'd) units. Standard dial markings are black and white. Optional custom range markings and optional internal lighting(*) are also offered upon request at additional cost. Please indicate the markings option (if markings are required) and lighting option at the time of ordering. 

(*) Note: An inverter is required for the Internal Lighting Option.

The FLIGHTCOM 403MC is a 4-place panel mount, easy to use, voice-activated mono intercom with 3-position transmit capability designed to fit almost anywhere in the panel.

AMPHENOL Bayonet Neill Concelman (BNC) product series connectors are miniature quick connect RF connectors. They feature two bayonet lugs on the female connector. BNCs are ideally suited for termination on miniature and subminiature coaxial cable (RG-58, 59, to RG-179, RG-316, etc.). Other BNC series include:

HD-BNC product series featuring the trusted, push and turn interface of a traditional BNC and providing tactile feedback and a positive lock for quick and guaranteed mating and 

Mini-BNC product series allowing higher connector densities while preserving the positive characteristics of the full-size 75 Ω BNC. The Mini-BNC provides the same positive locking bayonet system found on the BNC but allows 40% more interconnects in the same area.

HONEYWELL BENDIX KING® manufactures a range of TSO'd VOR/LOC/Glidescope indicators. These navigation instruments include VOR/LOC left-right needles, To-From indicator, VOR/LOC warning flag, glideslope deviation needle, glideslope warning flag and 30Hz OBS resolver. Depending on the model, the feature rectilinear instead of pendulum type meter movements for more precise indicator readings, 14/28 volt internal lighting, metal bezel with glass lens and course datum synchro for autopilot use.

These indicators are commonly used with BENDIX KING® remote mounted VOR/LOC converters such as KN-72 or KN-77, remote mounted Glideslope Receivers such as KN-73 or KN-75, KNS-80, KNS-81 nav systems and KX-155/KX-165 NAV/COMM transceivers.

The KI203 model features an internal VOR/ LOC converter and it is compatible with the BENDIX KING® KX155 transceiver. It has a rectilinear meter movement. Compatible with the BENDIX KING KX155 NAV/COMM transceiver.

The KI 204 VOR/LOC/Glideslope Indicator features a built-in VOR/LOC converter and scallop rejection filter, rectilinear needle movement and an optically coated glass lens. Requires input from external glideslope receiver. Compatible with the BENDIX KING® KX 155 or KX 155A NAV/COMMs. Requires input from external glideslope receiver.

The KI 206 VOR/LOC/Glideslope Indicator is rectilinear and internally lighted. It is used with the KNS 80/81 units, KX 165  transceiver and the KNR 634 VOR/LOC/GS/MB receiver. It is available with course datum synchro.

The KI208 model features a built-in VOR/ LOC converter and it is compatible with the BENDIX KING® KX 155 or KX 155A NAV/COMMs. It has a  pivoted needle action and a plastic lens.

The KI209 model features an internal VOR/ LOC converter and it is compatible with the BENDIX KING® KX155 transceiver. It features a pivot needle action.  The KI209 model includes GPS interface capability.

KELLY MANUFACTURING (RC ALLEN) RCA 15AK series are TSO'd 3-1/8" ( 80mm) electric directional gyros suitable for both fixed wing and rotor wing aircraft.

GARMIN® GMA 245 Audio Control Panel draws on Garmin audio technology for “home theater” quality sound. Offers instant upgrade as a slide-in replacement for older GMA 240 and GMA 340 units installed in experimental and light sport aircraft.

Key features include: 

Bluetooth wireless connectivity for easy access to phone calls & audio entertainment (1 device allowed connection)

Audio Inputs: 3 Transceivers (including TEL), 5 Receivers (NAV1, NAV2, AUX1, AUX2, AUX3)

3D audio processing helping pilots to “locate” inputs coming into their headsets

6 Position Intercom: pilot, co-pilot, 4 passengers with 2 volume controls by pilot/co-pilot or passengers

Clearance playback

Impressive audio mixing and distribution

USB charging port powering smartphones, tablets, music players and more

For additional information please consult the Product Description section and the supplied documentation.

Installation parts and accessories for GARMIN® Audio Control Panels are sold separately. Please refer to the respective product presentation.

The KANNAD 406 AS (P/N S1823502-03) is a aeronautical survival beacon. Thanks to its small size and light weight, the Kannad 406 AS fits easily inside a liferaft. It is supplied with a floating collar.

The KANNAD 406 AS is qualified by the French Civil Aviation in Europe with JTSO-2C91a & JTSO-2C126 and by FAA with TSO-C91a & TSO-C126 applied to “survival” beacons.

The ELT is programmed with either the aircraft tail number, a serial number or the aircraft operator designator. It can be installed inside an aircraft on a mounting bracket or in a carry-off bag (both on options).

The mounting bracket option includes a locking pin to avoid accidental activation before ELT removal. The locking pin can be ordered separately with the carry off version.

The ELT can be fitted with a "Water Switch Sensor" to be activated automatically when in contact with water. A buzzer and a led indicate activation.

An integrated “self test” checks the main functions of the beacon. The test result is given by the led flashing sequence.

Product Features:

Battery replacement is only every 6 years.

Precise pinpointing (<1NM) due to the unparalleled frequency accuracy of the 406 transmitter.

Three frequency transmitter (121.5 / 243 / 406 MHz)

Weight (including battery, auxiliary antenna and floating collar) 2.53 lbs (1150 g)

Options:

P/N S18 20 511-03 carry-off bag

P/N S1820511-02 Mounting bracket with locking pin

P/N S1820514-14 Water Switch Sensor

The LXNAV G–Meter  (accelerometer) is a standalone unit, designed to measure, indicate and log g–forces. The unit is offered in 57 mm or 80 mm diameters for installation into the aircraft instrument panel. It comes in two versions, standard and with flight recorder (FR).

The LXNAV G–Meter has an integrated high precision digital pressure sensor and inertial system. The sensors are sampled more than 100 times per second. Real Time Data is displayed on a QVGA 320x240 pixel 2.5″ high brightness color display. To adjust values and settings the LXNAV g–meter has three push buttons with fixed functions. The top button is ESC (CANCEL), the middle is to switch between modes and the lower button is the ENTER (OK) button.

The unit's inertial platform integrates a  ±8g accelerometer. Device is showing current g–load in navbox/needle and it’s min-max values in bar. Last flight min/max load navboxes are persistent till next flight. Min/Max limits with Warning zones can be defined.

Real Time Data is displayed on a QVGA 320×240 pixel 2.5-inch high brightness color display.

The Logbook menu displays the list of flights. If the RTC time is set properly the take-off and landing time shown will be correct. Each flight item consists of the maximum positive g–load, the maximum negative g–load from the flight and the maximum IAS. This function is available only with “FR” version.

Product Features:

• An extremely bright 2.5″ QVGA color display readable in all sunlight conditions with the ability to adjust the backlight.

• Three push buttons are used for input.

• RS232 input/output.

• Micro SD card

• 320x240 pixels color screen for additional information such as minimum and maximum g–force

• Built in RTC (Real time clock)

• Logbook

• 100Hz sampling rate for very fast response.

• Power supply cable included

AN5771-4A style 2-1/4 inch hydraulic pressure gauge with steel case connecting directly to the aircraft's hydraulic system. Fits in a 2-1/4" dia. panel opening and has a threaded 1/4"  connection for a fitting. Range: 0-2000 PSI. Only available in Overhauled Condition. Certified with fresh Matte-white dial. Yellow-tagged. Limited availability.

For new design projects and applications please refer to the presentations of alternative TSO'd and non TSO'd electronic hydraulic pressure gauges and pressure senders offered. 

Pressure Transducers (Senders) whenever required, ARE NOT INCLUDED in the prices of hydraulic pressure gauges. They are sold separately.

Note: A yellow tag is similar to a FAA 8130-3 Serviceable tag both denoting the "Serviceable" condition of the product i.e. it has been  repaired as needed, tested according to the manufacturer's procedure, meet the manufacturer's performance specifications and ready to return to service. Yellow tags are issued and widely accepted in North America while a FAA 8130-3 Serviceable tag is is accepted worldwide. The acceptance of yellow tags by national Civil Aviation Authorities should be checked by potential buyers prior to ordering.

These UMA new manufacture NON TSO'd electric ammeters offer accuracy, rugged construction, and contemporary styling. They are available in different  measurement ranges with a 270° sweep and are suitable for installation in 2-1/4" panel hole diameters. Made in U. S. A. and furnished with shunt.