The AVIASPORT indicators (gauges) are reliable, accurate and solid, combining the accumulated experience of more than twenty years with the latest technology  They have been designed for ROTAX engines and their display areas are divided into red, green and yellow zones in line with Rotax limits. They use a pointer that turns 240º or 320º, providing high resolution. AVIASPORT range of gauges includes CHT, EGT, tachometers, oil and fuel pressure, oil and coolant temperature, fuel level, voltmeters & ammeters and offered with casings of different sizes: 80mm; 57mm and 52mm.

The AVIASPORT fuel pressure gauges  have been designed especially to measure fuel pressure in Rotax® engines 912 and work both with 12V and 24V systems. Unlike mechanical gauges, the AVIASPORT ielectronic gauges use a high precision sensor to be installed close to the engine, preventing fuel lines in the cockpit. These gauges are sold without sending units or as kits with matching senders whenever specified.

The AV-525 is a VOR/LOC/GS antenna similar in style to the AV-12 but utilizes an internal balun transformer. The antenna is rated at speeds up to 350 mph and altitudes up to 50,000 feet. It is a direct replacement for the CI 157P.

Product Specifications:

Model: AV-525

Application: VOR/LOC/GS Receive Only

Frequency: 108-118 MHz (VOR/LOC) -328-336 MHz (GS)

Impedance: 50 Ohms Nominal

VSWR: 3.0:1 Maximum 108-118 MHz - 2.0:1 Maximum 329-335 MHz

Polarization: Horizontal

Pattern: Omni-Directional

Connector: “BNC” Female

Max. Weight: 0.50 lbs.

Certification: FAA TSO C34e, C36e, C40c

HONEYWELL BENDIX KING® KX 155A and KX 165A TSO'd Panel-Mounted NAVCOMM Transceivers update the concept of the combined navigation and communications radio for the 21st century. With such features as programmable comm channels, support for 8.33 kHz Comm tuning (KX 165A model only), GPS QuickTune, multiple operating modes, remote channel increment with flip-flop tuning & a built-in timer, they combine a sophisticated appearance with a number of advanced capabilities including:

Programming of up to 32 Comm channels in a non-volatile memory circuit for ready recall of regularly used frequencies.

Pre-selected frequencies stored in a non-volatile memory circuit.

When interfaced to the KLN 94 GPS, both the standby Comm and Nav frequencies can be selected and remotely tuned from the GPS database.

The KX155A (a KX155 upgrade) provides access to all 200 NAV and 760 COMM frequencies, along with its optional 40-channel glideslope. In addition to its standard use, it incorporates new features including a bearing-to-station mode and a radial-from-station mode, an internal Course Deviation Indicator (CDI) for use when the external CDI is being driven by a GPS receiver, and an elapsed-time and approach timer. The KX 155A system offers 10W minimum COMM transmitter power.

The KX-165A NAV/COMM replaces BENDIX KING® KX-155, KX-155A and KX-165 NAV/COMMs which are discontinued but are still available for outright sale or in exchange for returned customer owned units in USED Serviceable or Overhauled Conditions with FAA 8130-3 Form certification. The letters "SV","OH" and "EX" in the product reference numbers (SKU) indicate the condition/sale terms. 

Very similar to KX 155, the BENDIX KING® KX 165 NAV/COMM additionally incorporates an internal VOR/LOC Converter to directly drive the BENDIX KING®  KI 525A HSI (part of the KCS 55A Compass System). It can also display the current radial from the active VOR instead of the standby NAV frequency. Other features include 10 watts min transmitter power, easy-to-read, bright gas-discharge display, large, self-dimming, microprocessor- controlled gas discharge readouts and solid-state electronic tuning for fast, accurate selection of all 200 NAV and 760 COMM frequencies.

The KX 165A (-0201 model) NAV/COMM is a slide in 8.33 kHz replacement for its predecessors, the KX 155A which is discontinued and KX 165A 25 kHz NAV/COMMs (-0101 model). Completely redesigned, it features programmable Comm channels, support for 8.33kHz Comm tuning, GPS Quick-Tune, multiple operating modes, remote channel increment with flip-flop tuning and a built-in timer.

Mounting racks, connectors and manuals  for the installation of the NAV/COMMs are also offered.

For additional information please consult the Product Description section and the supplied documentation.

Sourced from quality manufacturers, our own branded (AVIATIONEU NEA ERA) aviation (air crew) headsets are offered in two main families or series  (100 and 400) each with PNR and ANR models suited for use in fixed and rotary wing aircraft.

Two different plug types are offered, PJ-055/PJ-068 dual plugs widely used in General Aviation and other airplanes and Military grade U174 plug used on helicopters and military aircraft.

With their competitive prices, advanced design and features, quality materials and rigid construction, AVIATIONEU NEA ERA headsets combine performance, functionality and comfort to provide cost effective solutions for air crew communications.  

ANR models (*) are offered with or without Bluetooth capability for music and mobile communications. All our headsets are accompanied by the Manufacturer and our Certificate of Conformance and come with a 12-months manufacturer warranty.

100 Series

AVIATIONEU NEA ERA 100 Series of aviation headsets includes PNR model 100 (GA) with dual plugs for airplanes and 100 (H) with U174 plug for military/helicopter operations. They feature  23dB and 24dB  noise reduction ratings respectively. 100 Series PNR headsets are Low cost, entry level headsets, ideal for General Aviation pilots and flight schools. Their ANR counterparts (Models 100A (GA) & 100A (H) are offered with a 29dB noise reduction rating and without or with Bluetooth capability, indicated by the letters "BT" in the product reference number (SKU). Pilots' style requirements are also covered through multiple colors, with Grey/Black (commonly stocked) and Green/Pink/Red/Yellow/Blue (On Demand as special order).

400C Series (Ultra Light Carbon Fiber Aviation Headsets)

Combining high performance, modern design, robust construction and an ultralight weight (only 9oz, 255g) the AVIATIONEU NEA ERA 400C series headsets are intended for use in air transport and military operations or by demanding pilots who seek high performance, functionality and confort headsets with an ultra light weight. Offered in carbon fiber black color. Various models include:

400C (GA) and 400C (H) PNR and 400AC (GA) and 400AC (H) ANR headsets offered with dual plugs and U174 single plug respectively and a noise reduction capability of 23dB (400C PNR) 29dB (400AC ANR).They come with or without Bluetooth capability.

AVIATIONEU NEA ERA 100 Series headsets are included in this listing while 400 Series headsets are separately listed. Please refer to the additional information and specifications provided or contact us.

(*) ANR function is powered by an AA battey in a supplied battery box with toggle switch. The headset will shut off automatically when unplugged from the battery box, manually turned off from the toggle switch or when the radio or avionics master switch is turned off.

Used by airlines, corporate flight departments, and major avionics manufacturers in the world, JEPPESEN® NavData® Databases offer the most complete and accurate aeronautical information available with worldwide coverage and access to more than 7,000 airports (a database three times the size of any other provider). NavData® information provide vital knowledge of airport features, runway characteristics, communications information, waypoint features, SIDs, STARs, terminal approach procedure information, VORs, NDBs and a comprehensive set of boundaries for controlled/restricted airspace. They can also be combined with obstacle and terrain data, and customizable data services for many different platforms and manufacturers. 

JEPPESEN®  NavData® services are distinct in terms of coverage, content, accuracy, FAA LOA 1 and EASA DAT compliant quality, configurability and high level service 24 hours a day.

JEPPESEN® NavData® services are offered  for different GARMIN® avionics listed below. Such services are included in separate product presentations.

G3X/G3X Touch

G300

G500/G500H/G500HTXi/G500TXi

G600/G600TXi/G700TXi

G900/G900X/G950

G1000/G1000H/G1000NXi/G1000H NXi

G2000/G3000

G5000H

GNC355/GNC355A

GNS175

GNS400/GNS400 WAAS Series

GNS500/GNS500 WAAS Series

GNX375

GPS Series

GTN600/GTN600Xi 

GTN700/GTN700Xi

GX Series

Perspective

Prodigy

Portable/mobile devices supported (Jeppesen Electronic Charts only):GARMIN® Pilot, GPSMAP 696, AERA 795/796

JEPPESEN® NavData® services for GARMIN® Navigators GNC®/GNS™/GPS 400/500 Series are offered  in both WAAS and NON-WAAS versions, as single one time updates, annual subscriptions and bundled with other information. The NON-WAAS versions are intended for use on the GARMIN® GNS™, GNC® and  GPS units while the WAAS version can be used on the GARMIN® GNS™ 400W/500W WAAS units. 

NavData® Annual Subscription Services include IFR NavData and are offered for either a single unit or dual units in the same cockpit. They are provided through downloaded updates every 28 days and are available in different coverage areas around the world.

Orders for these databases and their updates are fulfilled by AVIATIONEU TRAINING SYSTEMS & SERVICES which offers aviation database services, in cooperation with respective database providers, on a simplified subscription-based ordering process saving man effort, time and costs for customers. Please refer to the offered listed services for various manufacturers, models, database versions and coverage areas.

The FLIGHTCOM 403MC is a 4-place panel mount, easy to use, voice-activated mono intercom with 3-position transmit capability designed to fit almost anywhere in the panel.

The DIALIGHT 800/801-series MS25041 are high-quality Miniature press-to-test indicators with built-in bulb testing device and an adjustable dimmer (801 series). They use T 1 3/4 bulbs with midget flange base such as GE-330 (12V) or GE-327 (24V) bulbs but LED replacement bulbs can also be used (*). 

With their sleek design and easy installation, and their availability in different vibrant colors they are  the perfect accessories for providing a stunning, uniform glow and enhancing the appearance and functionality of indicators in the panel.

Crafted with durability in mind and made from top-grade materials for excellent protection against weather elements and long-lasting performance,  both 800 and 801 series indicators feature a T-1 3/4 midget flange for 15/32" mounting hole with solder termination, black anodized mounting bushing, aluminum mounting and flange nuts hardware. The push-to-test marking is die-stamped and filled on all lens cap assemblies used with 3 terminal units. They are is compatible with various LED bulb models and ensure a secure and precise fit. Bulbs are NOT INCLUDED. They can be ordered separately.

(*) PNs 800-1030-0337-504, 800-1030-0331-504, and 800-1030-0333-504 of  DIALIGHT 800 Series and PNs 801-1030-0337-504, 801-1030-0331-504, and 801-1030-0333-504 of DIALIGHT 801 Series and PTT indicators can be used with Based LED Replacement Lamps.

EASA Certified VHF transceiver with 6W output power and 8.33kHz frequency spacing.

UMA Non FAA Approved standard 2-1/4" and 3-1/8" altimeters are high quality, simple type (single pointer) with 2 revolution dial, designed to meet the needs of the low cost non-IFR users. Both altimeters utilize a knob adjustable barometric in. Hg scale, viewed through a Kollsman Window.

Product Specifications:

Case: Aluminum Casting

Weight: 10.6 oz. 

Case: Valox 420 Plastic

Weight: 5.0 oz.

Not FAA Approved

United States Military Standard RG58 Coaxial Cables are flexible and lightweight coaxial cable with a solid 20 American Wire Gauge (AWG) conductor, a 50-ohm characteristic impedance and maximum voltage rating of 1,900 volts. They feature a low-density polyethylene dielectric insulation with a dielectric constant of 2.3 and a diameter of 0.116 inches (2.9mm), a tinned copper braided shield and a PVC jacket. The outside diameter of the cable is 0.195' (4.95 mm), which makes it suitable for indoor and vehicular use where size matters. It is best for signal frequencies up to 1GHz, where its attenuation is 14.5 decibels per 100 feet. Above that frequency, attenuation increases, and at 5GHz it is approximately 60 dB/100 ft. RG58 coaxial cable supports 10Base2 Ethernet.

These cables come in different versions (types) corresponding to different conductors including RG58 (pure annealed copper conductor), RG58/U (single solid core copper conductor), RG58A/U (multi-core tinned copper conductor with generally low loss foamed insulation)  or RG58C/U (multi-strand tin-plated copper conductor and polyethylene solid core). RG58 A/U Coaxial Cables with PVC jacket are ones most used in WiFi, Wireless LAN, GSM, and Monitoring and Control of Network Infrastructure Sites. Also they are standard cables for avionics installations in experimental (non-certified) aircraft.

The mil-spec coaxial specification version of RG58 is the M17/28-RG58 Coaxial Cables. These cables are like their standard RG58 counterparts except that they feature a stranded tinned copper conductor and the outer conductor is a 36 AWG tinned copper braid.

RG58 Coaxial Cables are offered as part of our own labelled (AVIATIONEU NEW ERA) product lines. Sourced from quality manufacturers they priced and sold by the foot or meters (depending on the manufacturer). They can be furnished in standard or cut to order lengths.

Connectors compatible with RG58 coaxial cables are also offered and include BNC bayonet connectors, Low-Profile screwed TNC connectors and screwed FME connectors.

(*) The letter "U" means indicates that the conductor of the cable is copper while letters "A", "B", "C" are used when the conductor is aluminum thin.

KANARDIA HORIS Air Data-Attitude/Heading Reference System (AD-AHRS) includes several state of the art sensors and combines them into a small PFD display. It can serve as standalone PFD displays and it can be used as a primary instrument or as a perfect backup. It is offered as standalone (master) device with integrated sensors or as a slave unit when an I-ALT-IAS or EMSIS PFD or NESIS are present on the CAN bus. AD-AHRS standalone unit shows: attitude (roll, pitch), airspeed (IAS and TAS), vertical speed (Vario) indication, altitude, outside temperature, QNH setting, heading rate (1 minute and 30 seconds turn), tracking course (True or Magnetic). It is offered for two standard panel hole diameters of 57 mm (2.25") and 80 mm (3.15") and comes supplied with digital outside temperature sensor.

Product Features:

very low power consumption (< 2W at 12V),

low cost,

precise altitude pressure and IAS (indicated airspeed) sensor – connects to pitostatic,

precise angular rate sensors – gyros and accelerometers,

GPS receiver,

digital outside temperature sensor,

lightweight design (weighs only 235 g),

CAN bus compatible.

Available Options for HORIS AD-AHRS 57/80 (sold separately). They must be specified at the time of ordering.

MAGU Electronic magnetic compass.

AP-K Two servos for the two axis autopilot function. Must include also AMIGO.

AMIGO Autopilot panel for direct access to Autopilot functions. Must include also AP-K.

The RAMI AV-10 COMM Antenna is designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base. The antenna essentially matches the styling of the communication antennas currently used on most singles and light twins. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 2.70 lb @ 250 mph.

Product Specifications:

Application: Airborne Communications

Frequency: 118 to 137 MHz

Impedance: 50 Ohms Nominal

VSWR: 2.0 to 1 Maximum

Polarization: Vertical

Pattern: Omni-Directional

Connector: Type "BNC" Female

Max Weight: 8 oz

Max Height: 20-1/4"

RF Power Capacity: 25 Watts

Manufactured with high quality PC/ABS, the AERA 500 Panel Doc by AIRGIZMOS, maximizes its use by placing the GPS right in the aircraft  panel and hold securely in place without blocking any other instruments. Aera 500 Panel Dock™ is suitable for the  Garmin AERA™ 500 series of GPS (500/510/550/560). It makes GPS touch screen controls easier to navigate and matches the look and feel of the rest of the avionics stack, resulting in a pleasant, professional looking panel. Dimensions are 6.25" wide by 4.25" high. Garmin has reduced the number of connectors on the AERA 500 series  by using a docking connector. This docking connector has been integrated in the design and nests into the back of AIRGIZMOS Panel Dock.

Highly reliable and field-proven, the ADF 3500 direction finding systems by BECKER AVIONICS are trusted by the most reputed aircraft manufacturers. Suited for rotary and fixed wing applications, the ADF 3500 can be operated either in a standalone fashion or within EFIS, FMS or integrated flight deck systems.

The ADF 3502-() Receiver is designed for professional applications in the frequency range 190.0 kHz to 1799.5 kHz. The system is ideally suited for installations where minimum space is available. The small, lightweight control unit CU 5502 fits into a standard 2 ¼” (57mm) round instrument cutout and is only 2 ½” deep. The ADF Receiver can be installed at any convenient place in the aircraft. The RS 422 interface between CU and Rx reduces inter-wiring. The control unit CU 5502 offers a clear, high contrast, double line display, which is readable under all lighting conditions, even in bright sunlight. The frequency can be selected in 0.5 kHz/1kHz, 10 kHz/100 kHz steps by using variable speed frequency control. The pre-selection in the channel memory of the preset display allows instant switchover by pushing a “Flip-Flop” key to a new NDB en-route for indication of the cross bearing for a position fix relatively to a second NDB. The output of the receiver is compatible with indicator ID 3502 and the converter AC 5303/04 for RMI.

The ADF 3500 system features an extensive automatic self-test function. After switch-on, the microprocessor and the frequency synthesizer are thoroughly checked by a test subroutine. The remote receiver RA 3502-() unit can also be controlled by CDU of FMS systems.

JTSO certified for either VFR or IFR use in all types of fixed wing and rotary wing aircraft, the ADF receiver can also be combined with other Becker Prime Line equipment, such as VHF-COM, NAV-VOR/ILS navigation and Mode S transponder systems which have similar control units, providing a pleasant presentation in the panel.

RA3502 REMOTE ADF RECEIVER SYSTEM Features:

Compact and lightweight design

No forced cooling

No ventilation slots

Field-proven reliability

Robust and maintenance-free design

Operating altitude: 50,000 ft

RS422 control interface for EFIS or FMS integrations

Active LOOP/SENSE antenna

RMI connection via RMI convertor

Integrated BITE

JTSO, TSO certified

GARMIN® GMA 245 Audio Control Panel draws on Garmin audio technology for “home theater” quality sound. Offers instant upgrade as a slide-in replacement for older GMA 240 and GMA 340 units installed in experimental and light sport aircraft.

Key features include: 

Bluetooth wireless connectivity for easy access to phone calls & audio entertainment (1 device allowed connection)

Audio Inputs: 3 Transceivers (including TEL), 5 Receivers (NAV1, NAV2, AUX1, AUX2, AUX3)

3D audio processing helping pilots to “locate” inputs coming into their headsets

6 Position Intercom: pilot, co-pilot, 4 passengers with 2 volume controls by pilot/co-pilot or passengers

Clearance playback

Impressive audio mixing and distribution

USB charging port powering smartphones, tablets, music players and more

For additional information please consult the Product Description section and the supplied documentation.

Installation parts and accessories for GARMIN® Audio Control Panels are sold separately. Please refer to the respective product presentation.

HONEYWELL BENDIX KING® KI-229 Radio Magnetic Indicator (RMI) provides bearing information to either ADF or VOR stations by means of two pointers each of which is read against compass card.

The KI-229 RMI combines three data points on one indicator. The current aircraft heading from an HSI is shown on the card. The magnetic headings to VOR and NDB stations are shown by the twin needles. By combining all this information visually, less interpretation is required thus enhancing overall situational awareness, something especially helpful when the workload is high.

The KI-229 requires inputs from ADF, HSI and NAV receivers.

Product Features:

14/28 volt lighting

Compatible with Nav Receivers such as KN-53, KNR-615, KNR-630/631/632/633, KNR-634, KNR-665, and KNR-665A

Compatible with Nav systems including RNAV such as KNS-80 and KNS-81

Compatible with ADF receivers such as KR-87 and KDF-806

Compatible with Compass systems such as KCS-305 and KCS-55/55A

Requires input ARINC Compass System

TSO'd

Product Specifications:

TSO Compliance: Env. Cat. RTCA DO-160A A1C1/A/SKP/XXXXXXA/B/AAA

Weight: 2.8 lbs. (1.3 kg)

Temperature: -20 to +55°C

Altitude: 35,000 feet

TSO (Compass): TSO C6c

TSO (ADF): TSO C41c Class A

TSO (VOR): TSO C40a

Heading Input: Operates from any slaved magnetic compass with ARINC X,Y,Z outputs

VOR Video Input: 0.5VRMS 0 deg. phase composite 30Hz variable AM and 30Hz reference FM on a 9960Hz carrier (0.7VRMS maximum)

Sigma-Tek Light tray to connect lighting to Sigma-Tek 5000B Attitude Gyro and other avionics and instruments. Available in 14V or 28V versions.

ETSO'd Slimline Panel Mounted 10 W VHF Radio with built in 2-place intercom with auxiliary inputs for stereo music and audio warnings. Available with 8.33 kHz or  25kHz frequency spacing options.